VISTA64 RC1 and more than 2G RAM - finally wo

If creative would lonly listen to people who had problems with XP64, then maybe this would not be an issue in vista....
I have had the same issue with XP64 and an audigy2, and xfi. if you have 4G of ram, then there is no 5. sound. You only get sound through the front left and right. If you disable the ram from 2.75G to 4G then all works well. Apparently, Creative has programmers that still have no idea what a PCI memory hole is. Still. After many people complaining. After they told me they were aware of the problem after I was escaleted to tech support.
Still not fixed.
Well, I did a fresh install of vista rc2 and then installed the latest drivers for the XFI. Lo and behold, I finally get 5. surround sound. In the test, in media center and dolby digital novies, everywhere.
EAX works, all of the environment modes work everything seems to work very well except CMSS 3D. That does not work at all.
Well, this can be similated with EAX to turn stereo into a pseudo surround.
All in all, the first time in many years that creative software seems to work so far.Message Edited by tomb8 on 0-7-2006 07:22 PM

If you're that unhappy with their products, why buy them? Contacting the big retailers isn't going to keep them from carrying Creative's Products.
I don't think they've just "hacked" the previous drivers as the audio is completely rewritten in Vista. I fear that Creative has taken the same approach as some other companies out there and figuring that normal consumers don't have 4Gb of ram.... Then again, normal consumers don't have x64 windows either.
Rember whem Bill Gates said that something like 64K of ram was more than anyone would EVER need? I seem to remeber by the end of that year, 28k was "Too Much"
I think the bottom line here is that if you aren't happy with their products, vote with your wallet -Buy something else. As far as I'm concerned, I'm happy with my Audigy 2zs's and X-Fi. I'm NOT happy with "Software" sound solutions, such as the onboard sound or Turtle Beach's cards; after all, they are only Via chips on a add-in card. Still software sound.

Similar Messages

Audigy 2 ZS with Windows 7 64-Bit and more than 4GB of RAM

Hello,
I'm using Windows 7 Pro 64-Bit and I have installed 8GB RAM. I installed the latest Beta driver and I'm not able to use my microphone. It doesn't recognize any input at all. As soon as I remove 4GB RAM so only 4 GB RAM remain everything works as expected. The microphone problem is only there when you have more than 4GB RAM installed. Is there any driver or workaround to make the microphone work again?
I don't want to
use another version of Windows 7<
reduce my RAM<
use onboard sound<
I hope you can help me or at least tell me if (and when) Creative wants to fix this.
Thank you. Kind regards
T3rm

No solution from me, but I just wanted to chime in because I have the same problem and I'd like to explain it in detail. I've actually had this problem with Vista 64-bit (6GB of RAM) for the past 2 years. It's a very flaky/random problem, where about 40% of the time the microphone worked fine, 20% where I would get minor crackling (turns my voice into a robot voice), 20% with MAJOR crackling, and 20% where the microphone didn't work at all. When it would either crackle or stop working, I would usually restart the computer. After the computer booted up again, it would work fine 95% of the time (I very rarely had to reboot it twice in a row). However, it would randomly change states (between the four listed above) throughout the duration of the computer staying on. And, it would usually progress in the direction of "being more and more broken". For example:
.) Wake up, turn on my computer. Everything works fine.
2.) Go to class, come back. Now the microphone crackles.
3.) Do some homework, eat dinner. Now the microphone doesn't work at all.
I was excited when the SBAX_PCDRV_LB_2_8_00.exe update came out in July so I can finally get a consistent working microphone in a 64-bit version of Windows. Then everything came together last week, when I got a copy of Windows 7 64-bit Professional from my school. I tried the drivers and....FAIL. Pretty much the same thing, but different percentages/tendencies than listed above for Vista.
I just found this on another thread which highlights some useful information:
Microphone issues on Windows 7/Vista 64-bit (x64) with 4GB?of RAM or more
Audigy driver does not support 64-bit addressing, resulting in random issues with the Microphone (static, robotic or distorted voice, white noise).
Workarounds:
- install the 32-bit (x86) version of Windows
- limit the RAM available to Windows to less than 4GB
- enable Memore Hole in BIOS Setup, if?your motherboard supports the setting
Haha, why even release a 64-bit "compatible" driver when it doesn't even work right in 64-bit operating systems? Should I not expect a proper driver and buy an Asus Xonar instead?

I have OS X 1.6.8, 2GB of RAM and more than enough space. Why can't I download Mavericks?, I have OS X 1.6.8, 2GB of RAM and more than enough space. Why can't I download Mavericks?

I have OS X 1.6.8, 2GB of RAM and more than enough space. Why cant I Install Mavericks?

OS X Mavericks Supported Hardware List
iMac (Mid-2007 or later)
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
MacBook Pro (13-inch, Mid-2009 or later), (15-inch, Mid/Late 2007 or later), (17-inch, Late 2007 or later)
MacBook Air (Late 2008 or later)
Mac Mini (Early 2009 or later)
Mac Pro (Early 2008 or later)
Xserve (Early 2009)

About a month ago, I began periodically getting the spinning wheel while trimming, adding titles or transitions, etc. It lasts for about 15 seconds and then goes away. This seems to happen once every minute or two. I have more than enough RAM/Power.

About a month ago, I began periodically getting the spinning wheel while trimming, adding titles or transitions, etc. It lasts for about 15 seconds and then goes away. This seems to happen once every minute or two. I have more than enough RAM/Power, etc. About every other time I use FCPX it will spontaneously close (typically when editing a title). None of these things were happening previously. I have lots of projects that I store on Promise Pegasus drives via Thunderbolt. I only keep a few projects and the associated events open in FCPX at a time, otherwise I use Event Managaer X to keep track of them. Can anybody give me any suggestions as to why this is occurring and what I can do to remedy it? I have the latest version of FCPX as far as I can tell. This is driving me mad and costing me significant time while editing. By the way, I am doing just basic editing. Essentially trimming, cutting and adding some transitions and a few title screens. Thanks in advance for your help.

These apperarances of the spinning wheel tend to be related to some io operation that takes too long. Maybe the finder is trying to reach a network server that became unavailable.
I would try clearing caches and do an overall maintenance with an utility like OnyX.
Also, trashing preferences does no harm and is often the first troubleshooting measure when FCP X misbehaves.

Problems deploying Windows 7 x64 computers with more than 8GB RAM

SCCM 2012 R2 CU1
Windows 7 x64
We have a weird problem after upgrading from SP1 to R2 CU1. We have built a Windows 7 64 bit image with the latest updates (currently September 2014 updates). It deploys fine to all computers. But after some days – don’t know exactly – guess after 4-7 days
- we start getting errors on computers with more than 8 GB of RAM. The errors just start out of the blue. We didn't change TS, image or driver package.
The error shows in 3 different ways – depending of the computer model.
1) BSOD – STOP 0x000000F4. Disk error.
2) Task Sequence error 0x87D00269 when installing the first Application in TS. The error seems to have something to do with Management Point not found.
3) Task Sequence simply stops after installing CMclient. No errors - it simply stops.
For instance we get the BSOD on the Lenovo ThinkCentre M93p. But on the ThinkCentre M83 we get the TS error 0x87D00269. M93p and M83 uses the same driver package. They consequently fail every time after the error has begun. If we reduce (remove physically)
the memory to max. 8GB of RAM, they successfully run the Task Sequence. We get the above errors on both Lenovo and HP machines with more than 8GB.
I made a copy of the production TS and started testing. I created a new driver package for M93p/M83. It contains only the NIC drivers. Now M93p an M83 successfully finishes the TS. Adding sata or chipset or MEI/SOL drivers to the package I get the 0x87D00269
error on both m93p and M83. At least not the BSOD on the M93p ;-)
Tried setting SMSTSMPListRequestTimeout to 180 in the TS. Also tried putting in a 5 minute break before installing the first Application in the TS. Also tried putting in SMSMP=mp1.mydomain in the installation properties for the CMclient. It is still
the same problem.
Investigating the smsts.log on a computer with the 0x87D00269 error.
Policy Evaluation failed, hr=0x87d00269 InstallApplication
25-09-2014 08:59:59 3020 (0x0BCC)
Setting TSEnv variable 'SMSTSAppPolicyEvaluationJobID__ScopeId_654E40B7-FC55-4213-B807-B97383283607/Application_d9eea5a0-0660-43e6-94b8-13983890bae2'=''InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
EvaluationJob complete InstallApplication25-09-2014 08:59:59 3020 (0x0BCC)
MP list missing in WMI, sending message to location service to retrieve MP list and retrying. InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
m_hResult, HRESULT=87d00269 (e:\qfe\nts\sms\client\osdeployment\installapplication\installapplication.cpp,1080) InstallApplication
25-09-2014 08:59:59 3020 (0x0BCC)
Step 2 out of 2 complete InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Install application action failed: 'SCIENCE PC Guide'. Error Code 0x87d00269 InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Sending error status message InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Setting URL = http://mp1.mydomain, Ports = 80,443, CRL = false InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Investegating the 0x87D00269 error on the siteservers Status Messages Queries is weird.
Install Static Applications failed, hr=0x87d00269. The operating system reported error 617: You have attempted to change your password to one that you have used in the past. The policy of your user account does not allow this. Please select a password that
you have not previously used.
Hopefully this is a bug in translating the errorcodes? Just to be sure I checked all the SCCM serviceaccounts and none of them have expired passwords. And again why only on computers with more than 8GB RAM.
Anyone else had problems rolling computers with more than 8GB og RAM?
Why does this happens after a few days? To begin with, it runs just perfect and then starts failing on all machines with more than 8GB. Without a change in TS, image and driverpackage. We have seen this pattern for the last 3 month after
updating our image with the latest Windows Updates. It all started after updating from SP1 to R2 CU1.
Why does it only affect machines with more than 8GB RAM?
How to get rid of the 0x87D00269 error?
Seems to be somehow related to driver installation mechanism in SCCM in combination with Windows 7 64 bit, +8GB RAM and SCCM 2012 R2 CU1 or perhaps just R2.
Any help or hints would be appreciated!
Thanks
Anders

We have the same workaround, using a x64 boot image resolved all our issues with WinPE 5.0.
Machines with >4GB of RAM
Lenovo ThinkPad T540p failed applying drivers with 80040005
Black screen/white cursor issues intermittently
No updates from Microsoft, they are still looking through the logs, but we have updated our boot images and all is well now. Our case it still open with Microsoft, they are researching the logs.
Daniel Ratliff | http://www.PotentEngineer.com

Adding more than 2Gb RAM to MacBook Pro

Do you guys know of any way to put more than 2Gb RAM in an Intel 17" MacBook Pro?
Model Name: MacBook Pro 17"
Model Identifier: MacBookPro1,2
Processor Name: Intel Core Duo
Processor Speed: 2.16 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 2 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP12.0061.B03
SMC Version: 1.5f10
I bought this when the 17" models first came out, and have been disappointed in it ever since (I broke my rule of NOT buying the first generation of something). As time has passed, the main problem is the 2Gb limit for RAM. That's NOWHERE near enough, and shame on Apple for that limitation. If there were some way, even a non-standard way, of adding more RAM, I could get reasonable performance from this computer. As it is, this has been a wasted $3600 investment. whew!
Any help or ideas would be appreciated. Thanks! Feel free to email bruce at dbsdesigngroup.com

That's possible...actually likely. I'd love for that to be the case because I could fix it. ::Grin:: It's been this way since I first got it. When it arrived with just 1 Gb RAM, it was virtually unusable. I have a few apps as startup items, but they're just Firefox, Entourage, iNotepad, Linotype Font Explorer (with very few fonts activated), and Stickies. That shouldn't affect things much.
My needs are to use Photoshop, Illustrator and GoLive at the same time, with MSWord, Firefox and Entourage open as well. After the first bit of usage, I end up with 4-6 pageouts and a VERY slow computer. While it's doing the pageouts (which take quite a while), or switching between apps, it's very slow. And it's also extremly slow when Spotlight is indexing, so I disabled that.
I'm just not sure what it might be...nothing in Activity Monitor seems like it would be a culprit. Even in Safe Mode the problem is very evident.
I'll keep exploring and hopefully find something that will make this machine more viable for my use. I really appreciate the input greatly.

If my Mini is running 64 bit can I run more than 4Gb RAM?

I hear ALL over the place that the mini can not use more than 4Gb RAM.
Is this a hardware limitaion of the motherboard/Processor?
OR
Is this due to the fact that mini's run at 32 bit?
You can now easily run modern mini's at 64 bit:
http://blog.leanopen.nl/2010/04/23/doesnt-your-mac-mini-want-to-boot-in-64-bit/
So who knows the REAL answer?
Thanks -
skibum

Most of the Minis are limited to less than 4GB and that is a hardware limitation. The newest Mini with the nVidia video can access more. Apple only supports 4GB because they use matched DIMMs, which on paper have a slight performance improvement over unmatched DIMMs. For whatever reason, Apple doesn't yet support 4GB DIMMs in the Mini. (I suspect that the power requirements or prices for the larger DIMMS may have affected Apple's decision.)
If you do have an appropriate Mini, then you can get compatible 4GB DIMMs from [Macsales|http://eshop.macsales.com/shop/mac-mini> or others. Regardless, although I normally trust Macsales, more than 4GB is not supported by Apple, so you have to take that in to consideration. (i.e.: warranty from Apple or Applecare.)

More than 2GB RAM 1st gen Macbook

Is there any way possible to get more than 2GB RAM in a 1st gen macbook? I have one 2GB stick in right now but if I try to put even the old 512MB in the other slot I get no video. I also tried two 2GB sticks as well. I'm pretty sure the answer is no, but it doesn't hurt to ask and have hope
I have a dell inspiron with Core2 and it wouldn't see 4GBs until I pulled the battery on it. maybe there is a trick for the macbook like that?

I was hoping since it sees one 2GB stick it may like 2? It was a long shot. I just got this one used, so I'm stuck with it for a while. It runs fine with 2GB though.

I entered calculates hands and more than one account and used a credit card please raise security measure for Visa card and thank you

I entered calculates hands and more than one account and used a credit card please raise security measure for Visa card and thank you

Hi Eva B.,
Please refer to the help document below:
Adobe Store | Online order and payment FAQ
Regards,
Sheena

GeForce 7300 GT with more than 2GB RAM?

I had a lot of crashes with my MP and had original 2x512MB & Kingston's 2x1GB installed.
I contacted Kingston's support when Rember caused kernel panic every time I tried to test memory with it.
They said that it is "known issue" that 7300gt does not work with current drivers with openGL applications and more than 2GB memory installed.
But my MP kept having kernel panics with rember (and with lots of other applications)without any openGL involved. I even ran Rember with Finder closed.
With only 2x512 or only 2x1 installed everything seems to be fine, except that there's not enough memory to use FCS efficiently.
Anybody had same problems?
Is this really "known issue"?
If it is, when is solution available?
MP+GF7300gt have been on the market over half a year now.
Any links and references would be appreciated.
I didn't find anything from apple's website and will be calling apple's support tomorrow...

I have 4 GBs installed in my Mac Pro w/7300 card. No problems whatsoever.
For best performance from quad-channel interleaving you may want to install either six additional 512 MB DIMMs (four in Riser A and four in Riser B) or two more 512 MB DIMMs (in Riser A) and four 1 GB DIMMs (in Riser B.)
In your current configuration I believe you should have two 512 MB DIMMs in Riser A and two 1 GB DIMMs in Riser B.
See Memory (FB-DIMM) Replacement Instructions.

I seem to have lost all of my playlists and more than half my songs. How do I get them back? Dont know what I did wrong? Please Help

I seem to have lost all my original playlists and more than half my songs. How do I get them back, where did I go wrong?
If I was to press "restore" does this wipe everything off my library? I always thought that you could never loose songs? That they were always stored somewhere
in there. Please help,

If those tabs aren't in History > Recently Closed Tabs or Windows then they are probably lost.
You can try to search them in the History if you haven't bookmarked them.
Using the "Show my windows and tabs from last time" setting is a more reliable way to restore session data.
* Tools > Options > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"

I changed my HD "C". After reinstalling P Element 2 I got a problem. I can't open Photoshop Element. Error message is "Your working disc is full" But I have 61Go free on "C" HD and more than 1To free on "D" disc.

I changed my HD "C". After reinstalling P Element 2 I got a problem. I can't open Photoshop Element. Error message is "Your working disc is full" But I have 61Go free on "C" HD and more than 1To free on "D" disc.

Try resetting the pse 2 preferences and see if that clears things up.
reset preferences
Press and hold down the Shift+Ctrl+Alt keys just after starting the launch of pse 2
Keep holding the keys down until you get a dialog asking if you want to Delete the Adobe Photoshop Elements Settings File
Press Yes

I send to be apple developer,and put the credit details,and more than 3 days passed and no reply

i send to be apple developer,and put the credit details,and more than 3 days passed and no reply

Lenovo have to call their customer number too, and the Solectron people like to put them on hold. Only when a Lenovo Executive gets involved like Mark_Lenovo can any problem with Solectron get resolved, as normal worker wouldn't have special contact numbers within the Solectron's management. So Lenovo call center workers get as frustrated as you if not more, as they hear complaints after complaints about them been thick and incompetent regarding depot repairs, when there is nothing more they can do, but obviously customers don't know the full story.

140063685933 this is the receipt no Apart of two purchase there all rest I never received was a problem with the system they couldn't be download and naw you are charging me Haw unprofessional is that and more than an hour can't find how to get to custom

140063685933 this is the receipt no
Apart of two purchase there all rest I never received was a problem with the system they couldn't be download and naw you are charging me
Haw unprofessional is that and more than an hour can't find how to get to customer service to correct the mistake
Just so fed up will never ever pitches anything waiting of time and money

Apple is not here. Apple does not answer questions here. There are only volunteer users here.
The charge to your credit card takes place before you download the app.
If you are having problems downloading the apps that you bought, you will need to explain the issue in detail if you wish someone to help you.

What are the benefits to having more than 1GB RAM?

I notice the repeated advice in this forum over the question of "Should I get a Matched pair of 2 x 512MB or total 1.5GB RAM in my iMac G5 Rev. A/B?", and the answer always seems to be "more RAM will always perform faster."
Oh yeah, why? Someone point me to an informed link on subject somewhere else on the web. I mean no offense, but I wonder if, in this case, one bit of misinformtion became Gospel truth that keeps getting repeated over and over.
I'm fairly knowledgeable when it comes to Macs, but I don't understand this response that more RAM will always perform faster. Yes, yes, I know that barefeats.com found very little real-world performance gains in their testing of matched pairs vs. unmatched, or 128-bit vs. 64-bit, in the iMac G5. The same would be true of using CL2.5 vs. CL3.0 RAM -- you just ain't gonna see that much difference. But we are not talking processor speeds or hard drive RPM, which WILL affect all users. More memory is just more memory. If you are not using it, what good does it do? How will more unused memory "speed things up?"
I use a neat little program called "Menumeters." It puts my CPU/Disk/Memory/Network activity all in my menu bar. For the memory, it lists USED and FREE memory. Right now on my 1GB Mac Mini it is using 192MB RAM with 832MB FREE with 3 applications open, one of them being Safari.
I recently DOWNGRADED the memory in my iMac G5 2.0GHz from 2GB to 1GB. Why? Because menumeters showed that even in my 2GB iMac, my memory usage never went above about 800MB. Mind you I do video editing in Final Cut Express, I create DVD's in iDVD, I do photo editing in Photoshop, I manage my 8K digital photo library in iPhoto, and I could have all these and other applications open and running and my memory usage never went above 800MB. Every time I have checked my pageouts have been 0, meaning I never had to write the memory contents to my hard drive.
Which begs the question, how is having 1.5 or 2.0GB of RAM going to be a benefit over 1GB of RAM, when I have never needed more than 1GB of RAM in my Mac? I ask because I can either go with 1.0 or 1.5GB of memory in my iMac G5 right now, as I will sell either the 1GB or 512MB memory on ebay. But I'd like to know if someone can give me a compelling reason to put the 1.5GB in my iMac. Otherwise, it just seems like wasted $ to me, as I'll make over double selling the 1GB vs. the 512MB module.
Home: 20" iMac G5 2.0GHz rev.B/1GB/300GB Mac OS X (10.4.4) Work: Mac Mini 1.5GHz/1GB/64MB video/80GB

"you are telling me what my needs are based on your needs."
Eric, I have never told you what your needs are or should be. Did I once tell you you were wrong to have 2GB of RAM in your system? No. Did I say it is foolish for anyone to run 2GB of RAM in their iMac? No. Did I say 2GB of RAM in everyone's system would be an unnecessary excess? Certainly. Have you advised people to go for 1.5 or 2.0GB of memory instead of 1GB of memory without doing a needs anaylsis? You most certainly have, here and here and here, even after the original poster states they only want to buy a 512MB module, and in the last example, after someone else in that thread encouraged the novice Mac user to do a needs assessment. I'll let each reader determine for themself which they feel is the irresponsible advise.
Also, I never said "the average user, 'just isn’t going to need more than 1GB of RAM, now, or in the life of his iMac G5'" as you claim I did. I said a person running Safari, Mail, and iPhoto will not need more than 1GB. I consider that a light user. To clarify, to me a light user and an average user are not synonymous. And yes, a light user could get by with 512MB with virtual memory on occassion with an approximate 5% system slowdown, a slowdown which will probably not even be noticable.
What is need? To me if someone experiences an occassionaly pageout does not mean they need to go out and buy more memory. As a comparison, imagine you have a china setting for 12 people you received as a wedding gift. Every Sunday your wife fixes a nice dinner and uses the china. Typically you have 4-8 people at dinner every week, depending on if your brother's family joins you or not. But because of a special occassion -- a graduation that weekend -- you have 14 people at your house for lunch. Do you go out and buy enough china for 18 or 24 people, or do you and your wife use your everyday tableware for yourselves and give the other 12 guests the china that one day and save the expense?
See where I am going? 1.0GB of memory vs. 1.5 or 2.0 compares to 12 china settings vs. 18 or 24. And, no, I am NOT saying you, Eric, should only have 1.0GB of memory, but just if a person's needs dictate that.
Someone might stock the cabinet with 24 china settings when 29 meals out of 30 they have only 4-8 people eating on their china. But someone like myself, and other people that are budget conscious, probably will not want to do that. And I know you can change the illustration to support going for a higher amount of RAM, but my point is that for most iMac users, I do not believe that is something they really need.
Regarding your remark about data manipulation, I am sorry if the facts do not support highway's claims. The point of highway's whole remark was based on the premise that Apple shipped 64MB of RAM as the base amount for an iMac of 4 years ago. I showed where that was not a true statement. How is that data manipulation? And the main point of what I wrote was to show how someone writes an erroneous bit of information, then someone else picks up on that and repeats it, and soon more and more come to believe that misinformation. You can see that going on in these posts here and here with Barbara and here with CanadaRAM, either from misinformation from barefeats, or from others users on this board. Notice no one asking about the poster's needs, but just advice to get a higher amount of RAM.
Again, anyone reading this should do a needs assessment. I noticed, Eric, in your last post you acquiesce about the validity of doing a needs assessment. That's not one small detail. THAT'S THE WHOLE POINT of this discussion. I hope to see less cookie-cutter responses in this forum in regards to memory purchasing and see more responsible advice to determine one's need, especially for the novice users who are asking the questions and won't do any more fact-finding than the advice given them on this board.
I appreciate the advice of those in past threads who have asked a poster to determine their needs in their RAM buying decisions. In my opinion, that is the best advice they can receive. And I am more than done with this topic, as look at how much I repeated information in this last post that I wrote previously.

VISTA64 RC1 and more than 2G RAM - finally wo

Similar Messages

Maybe you are looking for