Visual Studio Update 2 hangs for 13 minutes on "Creating a system restore point..."

It appears that Visual Studio 2012 Update 2 hangs for a long period of time before it tries to create a system restore point. Should I create a Microsoft Connect issue for this?
Here is what I did:
I created a new Windows 8 x86 Virtual Machine using VirtualBox. I installed Visual Studio 2012 and Update 1 because Update 2 was not yet out. I came back 1 week later and tried to install Visual Studio Update 2.
When I ran the installer on the Virtual machine, it hung for seemingly 10 minutes at "Creating a system restore point..." I powered off the virtual machine and disabled system restore. I then ran with the /layout option on the host machine
so I could pre-download the files. Then I tried again.
Again, it hung. This time I let it go. It hung for exactly 13 minutes before it gave up and continued on to the install. The log file says this:
[0EBC:0F90][2013-04-18T12:39:36]: Apply begin
[0EBC:0F90][2013-04-18T12:39:36]: MUX: Apply Phase Begin
[0EBC:0F90][2013-04-18T12:39:36]: MUX: -----------------
[0EBC:0F90][2013-04-18T12:39:36]: MUX: Metrics: ShouldSendData=False
[0EBC:0F90][2013-04-18T12:39:36]: MUX: Free Disk Space before install: SystemDrive C:\ 32519413760 bytes AppDrive C:\ 32519413760 bytes
[01F4:0748][2013-04-18T12:52:34]: Creating a system restore point.
[01F4:0748][2013-04-18T12:52:34]: Could not create system restore point, error: 0x80070422. Continuing...
NOTE: Although it says "Creating a system restore point" at 12:52, it actually displayed the message on the screen at 12:39. That indicates that it was really doing something else during those 13 minutes, not creating the restore point.
That is corroborated by the fact that it took a long time regardless of system restore being on or off.
If no one has any information or explanation, I will create an issue on Microsoft Connect.

I have the same issue. Visual Studio 2013 Professional update 2 was not installed from Web installer. Rather I downloaded a trial version and now want to uninstall it. However, I let the uninstaller try to create a Restore Point all night while I slept.
Next day, not done. So I clicked cancel, and it then commenced to create a restore point for the cancel. I did let the cancel run for awhile but I rebooted.
I then researched something on how to disable the restore point security on my drive, but that did not deter Visual Studio from trying to protect me and it TRIES to create a restore point before uninstalling. Just hangs forever. I don't need a restore point
for an eval copy of VS, thank you very much. Perhaps a simple dialog ("Do you want to create a restore point?") would be helpful?
Update: turning off Windows Defender fixed the problem.

Similar Messages

Visual Studio 2013 Setup and Installation gets stuck at system restore point. what are the issues?, help me out!!!

Visual Studio 2013 Setup and Installation gets stuck at system restore point. what are the issues?, help me out ASAP

Hello nitinrathod29,
There are some possible fixes for this issue.
Please check the following thread:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/47bc6990-00f2-4d85-b3f8-9de03c637f43/visual-studio-2013-update-2rc-stucks-on-creating-system-restore?forum=vssetup
https://social.msdn.microsoft.com/Forums/vstudio/en-US/81478f51-37bb-4dbb-bd0c-beade1fd50ab/visual-studio-2012-professional-installation-getting-stuck-creating-a-system-restore-point?forum=vssetup
So here are them:
1. Check if you have any software which may prevent the installer from running. For example, Windows Defender or any other software which may restrict your permissions.
2. Just start the computer.
3. Run the setup as admin.
4. Check your UAC permissions.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Rstrui.exe Create a system restore point on windows server 8 standard

Hi,
Before making system changes, I need to create a system restore point on windows server 2008 Standard with SP2 installed., I found where to accomplish that via the UI, but the file isn't found when I search the C:\windows directory on the server.
The executable should be C:\windows\system32\rstrui.exe, unless it was changed for Server 2008. I have system protection turned on for the C: drive.This problem also exists on Windows server R2 enterprise with all updates applied.
I searched the install media (DVD) it wasn't there. I tried the full name (rstrui.exe) as well as truncated versions. I've searched on all of the applicable forums for rstrui.exe and "create system restore point".
Does someone know where I can get rstrui.exe for windows server 8. It's not available on windows server R2 enterprise or essentials either. If there is an alternative method of creating restore points on windows server 8, please point me in the
correct direction. Is it available in any of the variations of windows server 12. I have all of the updates installed when checking for how to create a system restore point or with searching for rstrui.exe. BTW, performing "system backups" or implementing
"previous versions" functionality work just fine.
Thank you in advance,
Steve

Hi Steve,
I replied the same question you posted earlier:
https://social.technet.microsoft.com/Forums/en-US/68352496-2fe8-4320-8848-f22d0d1a6f6b/rstruiexe-missing-unable-to-create-restore-point-windows-server-8-std-r2?forum=windowsbackup
To me it seems that the function is removed in both Windows 2008 SP2 and Windows 2008 R2. Here is my original reply:
I did not find this file either on my new-installed Windows 2008 SP2 system. I assume it is retired in Windows Server 2008 and the function is replaced by Windows Server Backup. I cannot confirm why there is still an option in MSCONFIG which point to
rstrui.exe but I can find the file nowhere. Also this option is removed in Windows Server 2008 R2.
Here link a link for using Windows Server Backup to create system state backup as a restore point:
Recover
the System State
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I have a pc with windows 7 professional. I use adobe cs6 production suite and all of a sudden premiere pro stopped working. I had installed a program recently and created a system restore point prior to it's installation. I installed Zaxwerks proanimat

I have a pc with windows 7 professional. I use adobe cs6 production suite and all of a sudden premiere pro stopped working. I had installed a program recently and created a system restore point prior to it's installation. I installed Zaxwerks proanimator 5.1. Restored computer back and I now get an error when trying to run any cs6 program it is a configuration error and it says to uninstall and reinstall.Won't uninstall says I have an error 1. What should I do?

clean and then reinstall, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Cannot create a system restore point [service cannot be started in Safe Mode (0x8007043c)]"

Is there a solution to years old error message "Cannot create a system restore point [service cannot be started in Safe Mode (0x8007043c)]" I have been trying to create a restore point or image on an external hard drice, but I get the quoted message
and the system is NOT in safe mode. I have reviewed all the previous suggestions on this forum to no avail. Are there any new suggestions. My computer had Windows 7 installed and I have no source to re-load the OS. Ralph

Hi,
So actually you're not in safe mode (not black background, no "safe mode" on the left-bottom of the screen), right?
I think something is causing your PC thinking itself is in the safe mode, run sfc/scannow and chkdsk /f/r, check if the two tools can find any error.
Or perform a startup repair in recovery console, check the result
http://windows.microsoft.com/en-IN/windows7/products/features/startup-repair
Yolanda Zhu
TechNet Community Support

How to create a system restore point in cmd

We team's server can't work before patched
We patched every firday.
So,I want to create a task to run 'bat' for creating restore point
研小艾

I know the "rstrui.exe" , it can restore system.
but I don't know the exe name to create restore point.
研小艾

Can't see table data from Visual Studio Express 2013 for Web

Hello!
I have a problem and I can't see neither the table data nor the table definition for my database inside Visual Studio Express 2013 for Web, Server Explorer. When I right click it just says refresh, copy or properies.
Does anyone know what's wrong?
Thanks a lot!

Hi J1m,
According to your description, I make a test on my computer and I am able to reproduce your issue. Firstly, I install the Visual Studio 2013 express for web successfully, create a project and connect to SQL Server database. Then I right click one table,
and I can see all the options including ‘Show Table Data ’, ‘Open Table Definition ’, ‘Copy’, ‘Refresh’, and ‘Properties’. Next, I uninstall the SQL Server data tools, and restart the Visual Studio, right click on table, and only find the three options
‘Copy’, ‘Refresh’, ‘Properties’ as the following screenshot, which is the same scenario with yours.
Based on my test, the issue could be due to the missing or corrupt SQL Server Data Tools. To work around the issue, you should install the latest SQL Server data tools for Visual Studio 2013. You could download the
ISO file for SQL Server data tools and extract the ISO files to your hard drive following the methods in this
article, and install the data tools. Please restart your computer after you complete the installation.
Regards,
Michelle Li

Creating System Restore Points in Windows Server 2012

Searching for "Create a restore point" on Windows Server 2012, brings up a link that when clicked takes you to System Properties. Once there, there is no System Protection tab or option to create a system restore point. Windows Server Backup
is installed and functioning.
Is this feature available in Windows Server 2012? Was it replaced with Shadow Copies for Shared Folders?
Thanks for any insight you can provide.

HI,
To create a system restore point, run msconfig.exe, that will launch a UI, click the tools tab, select system restore, that should invoke a UI which asks if you want to restore to an earlier version or do you want to create a new restore point. I clicked
"create a new restore point" The problem that I ran into is that when I click that button is I receive the error: can't find "C:\Windows\System32\rstrui.exe". That's the .exe which supports the "Create / restore point' processes. I
posted a question about the missing .exe on the windows > windows 8.1 > Repair and recovery forum and was told to post it here. :>) The subject title of that post is "rstrui.exe Create a system restore point on windows server 8 Standard".
That post documents the steps that I followed trying to create a system restore point. (FYI: I'm not trying to backup any drives. I know what a system restore point is and what backup is. They are two different animals). I want to create a restore
point prior in order to prep for installing an App. So, If a problem occurs; the registry keys and app files can be backed out to some extent. BTW: Create system restore point on windows 8.1does work perfectly well, there's a different UI. I just didn't
know where to post the initial problem.regards,Steve

How do I create a view in SQL Server in Visual Studio Express 2013 for Desktop?

Hi
I've got a SQL Server database set up using the internal SQL Server in Visual Studio Express 2013 for Desktop. I want to create a view (using tables with one to many relationships) but I don't
know how to do it.
Where can I find a good tutorial on creating views in SQL Server in Visual Studio Express 2013 for Desktop? I think Visual Studio Express 2013 for Desktop doesn't have some view designer that
exists in the non-express version of Visual Studio (if I'm not mistaken). So I think I'd need a tutorial on how to do the actual SQL, unless there is some tool I don't know about.
Thanks

Hi ,
According to your description, if you install SQL Server SQL Server 2014 Express and SQL Server Manager Studio tools (SSMS), if you want to create a view, you can use SSMS. Then if you want to connect to and Diagram your SQL Express Database in Visual Studio
2013, you can attach the database file by using the .NET Framework Data Provider for SQL Server in Visual Studio, and create a database diagram via expanding the “Database Diagrams” node.
For more information, there is similar issue about how to connect to and Diagram your SQL Express Database in Visual Studio 2012 , you can review the following article,
http://blogs.msdn.com/b/bethmassi/archive/2011/10/27/how-to-connect-to-and-diagram-your-sql-express-database-in-visual-studio-lightswitch.aspx.
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Visual Studio 2013 Express for Windows - InitializeComponent() does not contain a definition issue

Hi,
I have recently downloaded Visual Studio 2013 Express for Windows (Windows Store App version), with Update 1.
I create a blank app. I right-click on InitializeComponent() in the MainPage.xaml.cs and select Go To Definition. It brings me to the .g.i.cs file where this method resides.
I go into the designer for MainPage.xaml and create a grid of 2 rows and 2 columns (all at 1*). I add one button, doesn't matter where. I double click on that button to add a click method to MainPage.xaml.cs. Without entering anything into the button click
method, I scroll up and InitializeComponent() has an error and tells me there is not definition, even though I was looking at the definition a minute ago. I found I could unload the project and reload it and InitializeComponent() would have the definition
in the .g.i.cs file but as soon as I add another button click or anything else I run into the same error. It seems as if the .g.i.cs file is not automatically regenerating, or it is being deleted all together when the button click method is added to the xaml.cs
file.
Everything I have done up to this point is very vanilla. I installed VS '13 Express for Windows, didn't change any VS setting, created a project and ran into this issue. I installed Update 1 thinking there might be a fix from the update--no luck. The xaml
file Build Action is Page and the Xaml.cs file is Compile.
I have tried deleting the MainPage.xaml file, after the creation of a project, and adding a new MainPage file with the added templates VS wants to include, and I still run into the same issue.
I have searched for answers the past few days but haven't found anything that addresses my issue (most of what I found addresses VS '10 but their InitializeComponent() issues aren't the same as mine). Any help the MSDN community can provide would be
a great help. If worst comes to worst, I will re-install VS and see if that corrects it--this would be a last-ditch effort though.
Thank you for any help you may be able to provide

Intellisense has a bug in VS2013 where it doesn't recognize InitializeComponent when you start working on the XAML. My feeling is that if you try to compile this app, it will run fine (as long as there are no actual errors).
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

Installation Problem Visual Studio Express 2013 for Web on Windows 8.1

Hi,
I am new to Microsoft developing tools and I have spent the last two days trying to install VS Express 2013 for Web on my laptop that's running windows 8.1 (X64,Intel
Core i5 3337U (1.80GHz)).
I run it as an administrator and have enough space on the disk. However, I keep on getting the same error.
Microsoft Visual Studio Express 2013 for Web - ENU Fatal error during installation.
After uninstalling and deleting the temp files, I get an additional error.
Entity Framework 6.1.1 Tools for Visual Studio 2013
User cancelled installation.
In my log files here are some of the problems that I saw:
[0354:1418][2015-02-23T13:55:12]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\WebFrameworksTools\Servicing\5.0\VisualStudio12'; variable = 'AspNetWebFxTools_VS2013_Version'
[0354:1418][2015-02-23T13:55:12]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\WebFrameworksTools\Servicing\5.0\VWDExpress12'; variable = 'AspNetWebFxTools_VWD2013_Version'
[0354:1418][2015-02-23T13:55:12]i000: Registry key not found. Key = 'SOFTWARE\Classes\Installer\Dependencies\Microsoft.VS.Bliss_Core,v12'; variable = 'bliss_core_DetectKeyExists'
[0354:1418][2015-02-23T13:55:12]i000: Setting numeric variable 'bliss_core_DetectKeyExists' to value 0
[0354:1418][2015-02-23T13:55:12]i000: Registry key not found. Key = 'SOFTWARE\Policies\Microsoft\SystemCertificates\AuthRoot'; variable = 'DisableRootAutoUpdate'
[0354:1418][2015-02-23T13:55:12]i000: Registry key not found. Key = 'SOFTWARE\Microsoft Corporation\DataFxTools\12.0.0.0'; variable = 'EFTools_2013_VersionKey'
[0354:1418][2015-02-23T13:55:12]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\Help\v2.1\Setup'; variable = 'help3vs_49_DetectKey'
[0354:1418][2015-02-23T13:55:12]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\Help\v2.1\Setup'; variable = 'help3vs_49_DetectKeyExists'
[0354:1418][2015-02-23T13:55:12]i000: Setting numeric variable 'help3vs_49_DetectKeyExists' to value 0
[0354:1418][2015-02-23T13:55:12]i000: Setting numeric variable 'IEsvcVersionExists' to value 1
[0354:1418][2015-02-23T13:55:12]i000: Setting string variable 'IEsvcVersion' to value '11.0.9600.17631'
[0354:1418][2015-02-23T13:55:12]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\SystemCertificates\AuthRoot\Certificates\3B1EFD3A66EA28B16697394703A72CA340A05BD5'; variable = 'MicrosoftRootCertificateAuthority2010AuthRootExists'
[0354:1418][2015-02-23T13:55:12]i000: Setting numeric variable 'MicrosoftRootCertificateAuthority2010AuthRootExists' to value 0
[0354:1418][2015-02-23T13:55:12]i000: Setting numeric variable 'MicrosoftRootCertificateAuthority2010RootExists' to value 1
[0354:1418][2015-02-23T13:55:12]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\SystemCertificates\AuthRoot\Certificates\8F43288AD272F3103B6FB1428485EA3014C0BCFE'; variable = 'MicrosoftRootCertificateAuthority2011AuthRootExists'
[0354:1418][2015-02-23T13:55:12]i000: Setting numeric variable 'MicrosoftRootCertificateAuthority2011AuthRootExists' to value 0
[0354:1418][2015-02-23T13:55:12]i000: Setting numeric variable 'MicrosoftRootCertificateAuthority2011RootExists' to value 1
[0354:1418][2015-02-23T13:55:12]i000: Setting string variable 'netfxfullredist_43_CBSValue' to value '1'
[0354:1418][2015-02-23T13:55:12]i000: Setting string variable 'netfxfullredist_43_DetectKey' to value '4.5.51641'
[0354:1418][2015-02-23T13:55:12]i000: Setting string variable 'NetFxFullRedist_InstalledRelease' to value '378675'
[0354:1418][2015-02-23T13:55:12]i000: Setting numeric variable 'NetFxFullRedist_InstalledReleaseExists' to value 1
[0354:1418][2015-02-23T13:55:12]i000: Setting string variable 'OS_BuildNumber' to value '9600'
[0354:1418][2015-02-23T13:55:12]i000: Setting string variable 'ssceruntime_x64_msi_DetectKey' to value '4.0.8876.1'
[0354:1418][2015-02-23T13:55:12]i000: Setting numeric variable 'ssceruntime_x64_msi_DetectKeyExists' to value 1
[0354:1418][2015-02-23T13:55:12]i000: Setting string variable 'ssceruntime_x86_msi_DetectKey' to value '4.0.8876.1'
[0354:1418][2015-02-23T13:55:12]i000: Setting numeric variable 'ssceruntime_x86_msi_DetectKeyExists' to value 1
[0354:1418][2015-02-23T13:55:12]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\SSDT\12.0\1033'; variable = 'ssdt_lang_detect_enu'
[0354:1418][2015-02-23T13:55:12]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\vs\Servicing\12.0\teamExplorerCore'; variable = 'teamExplorercore_DetectKeyExists'
[0354:1418][2015-02-23T13:55:12]i000: Setting numeric variable 'teamExplorercore_DetectKeyExists' to value 0
[0354:1418][2015-02-23T13:55:12]i000: Setting string variable 'VSComponentPathVariable' to value ''
[0354:1418][2015-02-23T13:55:12]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\Updates\Microsoft Visual Studio 2013\vsupdate_kb2829760'; variable = 'vsupdate_DetectKey'
[0354:1418][2015-02-23T13:55:12]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\Updates\Microsoft Visual Studio 2013\vsupdate_kb2829760'; variable = 'vsupdate_DetectKeyExists'
[0354:1418][2015-02-23T13:55:12]i000: Setting numeric variable 'vsupdate_DetectKeyExists' to value 0
[0354:1418][2015-02-23T13:55:12]i000: Setting string variable 'webdeploy_x64_en_usmsi_902_DetectKey' to value '9.0.1764.0'
[0354:1418][2015-02-23T13:55:12]i000: Setting string variable 'webdeploy_x86_en_usmsi_901_DetectKey' to value '9.0.1764.0'
[0354:1418][2015-02-23T13:55:12]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\Web Tools\Visual Studio 12'; variable = 'WebTools_VS2013_VersionKey'
[0354:1418][2015-02-23T13:55:12]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\Web Tools\Visual Studio 2013'; variable = 'WebTools_VS2013_VersionKey_2'
[0354:1418][2015-02-23T13:55:12]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\Web Tools\Visual Studio Express 12 for Web'; variable = 'WebTools_VWD2013_VersionKey'
[0354:1418][2015-02-23T13:55:12]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\Web Tools\Visual Studio Express 2013 for Web'; variable = 'WebTools_VWD2013_VersionKey_2'
The last line of my log file contained this:
[0354:1418][2015-02-23T14:02:26]i399: Apply complete, result: 0x80070643, restart: None, ba requested restart: No
I really need to have this up and running as soon as possible. Any help would be greatly appreciated.
Thanks!

Hi,
By the errors:
[0354:1418][2015-02-23T13:55:12]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\WebFrameworksTools\Servicing\5.0\VisualStudio12'; variable = 'AspNetWebFxTools_VS2013_Version'
[0354:1418][2015-02-23T13:55:12]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\WebFrameworksTools\Servicing\5.0\VWDExpress12'; variable = 'AspNetWebFxTools_VWD2013_Version'
[0354:1418][2015-02-23T13:55:12]i000: Registry key not found. Key = 'SOFTWARE\Classes\Installer\Dependencies\Microsoft.VS.Bliss_Core,v12'; variable = 'bliss_core_DetectKeyExists'
It maybe a registry or administrator issue.
Please install VS with administrator.
What's more, it maybe a corrupt registry issue. And you can't install any version of Visual Studio, I think you can use the tool to fix problems that programs cannot be installed or uninstalled. It also can fix the corrupted registry keys.
http://support.microsoft.com/mats/program_install_and_uninstall/en-us
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

MICROSOFT VISUAL STUDIO UPDATE 4

I wanted to know that will i have to install Microsoft Visual Studio Update 3 before installing Update 4 in order to get the functionality of Update 3 ???

Hi Jack,
Thanks for your post.
As far as I know we can install the VS 2013 Update 4 directly.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

No JavaScript Intellisense in Visual Studio Express 12 For Windows Phone

I'm developing mobile app for windows phone using Windows phone 8 SDK (Visual Studio Express 12 For Windows Phone). I want to use code auto-Complete facilities when coding in Javascript. For that I need to use Intellisense for JS.
According to my knowledge, To configure Intellisense according to my knowledge,It have navigate to the [Tools] > [Options] > Text Editor > JavaScript > IntelliSense >
But in my [Tools] > [Options] > Text Editor > list there is No item called JavaScript.
Please help me for solve this.

Hi AmilaEranga,
I try to test it in my side, I could get the JavaScript Text Editor in my side.
So I doubt that it would be your VS IDE issue. If possible, please download it from the official site here:
http://www.microsoft.com/en-us/download/details.aspx?id=30664
And then repair your VS, test it again.
Or you could run the following command lines with the Developer Command Prompt of VS2012:
devenv /setup
devenv.exe /InstallVSTemplates
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Microsoft Visual Studio 2010 Tools for Office Runtime installation Error

Hi Team,
Am facing error while installing Microsoft Visual Studio 2010 Tools for Office Runtime installation. Request you to please check and let me know.
Component Microsoft Visual Studio 2010 Tools for Office Runtime (x86 and x64) has failed to install with the following error message:
"User cancelled installation. "
The following components failed to install:
- Microsoft Visual Studio 2010 Tools for Office Runtime (x86 and x64)
See the setup log file located at 'C:\Users\ALAKKOJU\AppData\Local\Temp\VSDF353.tmp\install.log' for more information.
The following properties have been set:
Property: [AdminUser] = true {boolean}
Property: [InstallMode] = HomeSite {string}
Property: [ProcessorArchitecture] = AMD64 {string}
Property: [VersionNT] = 6.1.1 {version}
Running checks for package 'Windows Installer 3.1', phase BuildList
The following properties have been set for package 'Windows Installer 3.1':
Running checks for command 'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe'
Result of running operator 'VersionGreaterThanOrEqualTo' on property 'VersionMsi' and value '3.1': true
Result of checks for command 'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe' is 'Bypass'
'Windows Installer 3.1' RunCheck result: No Install Needed
Running checks for package 'Microsoft .NET Framework 4 (x86 and x64)', phase BuildList
Reading value 'Version' of registry key 'HKLM\Software\Microsoft\NET Framework Setup\NDP\v4\Full'
Read string value '4.0.30319'
Setting value '4.0.30319 {string}' for property 'DotNet40Full_TargetVersion'
The following properties have been set for package 'Microsoft .NET Framework 4 (x86 and x64)':
Property: [DotNet40Full_TargetVersion] = 4.0.30319 {string}
Running checks for command 'DotNetFX40\dotNetFx40_Full_x86_x64.exe'
Result of running operator 'ValueEqualTo' on property 'InstallMode' and value 'HomeSite': true
Result of checks for command 'DotNetFX40\dotNetFx40_Full_x86_x64.exe' is 'Bypass'
Running checks for command 'DotNetFX40\dotNetFx40_Full_setup.exe'
Result of running operator 'ValueNotEqualTo' on property 'InstallMode' and value 'HomeSite': false
Result of running operator 'VersionGreaterThanOrEqualTo' on property 'DotNet40Full_TargetVersion' and value '4.0.30129': true
Result of checks for command 'DotNetFX40\dotNetFx40_Full_setup.exe' is 'Bypass'
'Microsoft .NET Framework 4 (x86 and x64)' RunCheck result: No Install Needed
Running checks for package 'Microsoft Visual Studio 2010 Tools for Office Runtime (x86 and x64)', phase BuildList
Reading value 'Version' of registry key 'HKLM\SOFTWARE\Microsoft\VSTO Runtime Setup\v4R'
Unable to read registry value
Not setting value for property 'VSTORuntimeVersionInstalled'
The following properties have been set for package 'Microsoft Visual Studio 2010 Tools for Office Runtime (x86 and x64)':
Running checks for command 'VSTOR40\vstor40_x86.exe'
Skipping ByPassIf because Property 'VSTORuntimeVersionInstalled' was not defined
Result of running operator 'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'Intel': true
Result of checks for command 'VSTOR40\vstor40_x86.exe' is 'Bypass'
Running checks for command 'VSTOR40\vstor40_x64.exe'
Skipping ByPassIf because Property 'VSTORuntimeVersionInstalled' was not defined
Result of running operator 'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'AMD64': false
Result of running operator 'ValueEqualTo' on property 'AdminUser' and value 'false': false
Result of checks for command 'VSTOR40\vstor40_x64.exe' is 'Install'
'Microsoft Visual Studio 2010 Tools for Office Runtime (x86 and x64)' RunCheck result: Install Needed
EULA for components 'Microsoft Visual Studio 2010 Tools for Office Runtime (x86 and x64)' was accepted.
Copying files to temporary directory "C:\Users\ALAKKOJU\AppData\Local\Temp\VSDF353.tmp\"
Downloading files to "C:\Users\ALAKKOJU\AppData\Local\Temp\VSDF353.tmp\"
(1/7/2015 12:47:44 PM) Downloading 'VSTOR40\vstor40_x64.exe' from 'http://go.microsoft.com/fwlink/?LinkId=158918' to 'C:\Users\ALAKKOJU\AppData\Local\Temp\VSDF353.tmp\'
Download completed at 1/7/2015 12:48:26 PM
Verifying file integrity of C:\Users\ALAKKOJU\AppData\Local\Temp\VSDF353.tmp\VSTOR40\vstor40_x64.exe
WinVerifyTrust returned 0
File trusted
Running checks for package 'Microsoft Visual Studio 2010 Tools for Office Runtime (x86 and x64)', phase BeforePackage
Reading value 'Version' of registry key 'HKLM\SOFTWARE\Microsoft\VSTO Runtime Setup\v4R'
Unable to read registry value
Not setting value for property 'VSTORuntimeVersionInstalled'
The following properties have been set for package 'Microsoft Visual Studio 2010 Tools for Office Runtime (x86 and x64)':
Running checks for command 'VSTOR40\vstor40_x64.exe'
Skipping ByPassIf because Property 'VSTORuntimeVersionInstalled' was not defined
Result of running operator 'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'AMD64': false
Result of running operator 'ValueEqualTo' on property 'AdminUser' and value 'false': false
Result of checks for command 'VSTOR40\vstor40_x64.exe' is 'Install'
'Microsoft Visual Studio 2010 Tools for Office Runtime (x86 and x64)' RunCheck result: Install Needed
Verifying file integrity of C:\Users\ALAKKOJU\AppData\Local\Temp\VSDF353.tmp\VSTOR40\vstor40_x64.exe
WinVerifyTrust returned 0
File trusted
Installing using command 'C:\Users\ALAKKOJU\AppData\Local\Temp\VSDF353.tmp\VSTOR40\vstor40_x64.exe' and parameters ' /q:a /c:"install /q /l"'
Process exited with code 1602
Status of package 'Microsoft Visual Studio 2010 Tools for Office Runtime (x86 and x64)' after install is 'InstallFailed'
Thanks,
Anil

Hi Anil,
According to the error message "User cancelled installation" and the log "Process exited with code 1602", it seems that it is you cancelled the installation that cause the install fail. Is that true? If yes, please reinstall
it without cancelling it. You can take the following steps:
Download "Visual Studio 2010 Tools for Office Runtime" from
http://www.microsoft.com/en-us/download/details.aspx?id=42513 .
Run the downloaded vstor_redist.exe with admin.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Is there a profiler in Visual Studio Express 2013 for Windows Desktop?

Is there a profiler in Visual Studio Express 2013 for Windows Desktop? I can't seem to find the option anywhere.

Hi gnychis1,
I install it in my Environment, It doesn't have the profiler tool in this express version.
My suggestion is that you could use the VS2013 Community version, it is also free, but it has the profiler tool in this version.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Visual Studio Update 2 hangs for 13 minutes on "Creating a system restore point..."

Similar Messages

Maybe you are looking for