Visual WebPart Sandboxed Solutions SP 2013 on Premise

Hello!!
Is it possible use one visual webpart with sandboxed solutions at SP 2013 on Premise?
I created one but when I insert on page an error occurs.
This is an error.
An unknown exception occurred while executing a sandboxed code solution request in the worker process.\r\n|0
Thanks

Hi,
Its not possible to deploy visual web part in Sandbox solution for SP 2013 as well as 2010. see the link below for reasons
http://www.wictorwilen.se/Post/Visual-Web-Parts-in-SharePoint-2010-cannot-be-Sandboxed.aspx
If you still need to deploy visual webpart there is a work out on this with few limitations, pls check below.
https://visualstudiogallery.msdn.microsoft.com/8e602a8c-6714-4549-9e95-f3700344b0d9/
Please remember to click 'Mark as Answer' on the answer if it helps you

Similar Messages

Visual Webpart Sandboxed Solution Error in SharePoint 2013

I am trying to insert a visual web part using sand boxed solution on a page.But when i insert a web part on page i get the following error.
"Web Part Error: Unhandled exception was thrown by the sandboxed code wrapper's Execute method in the partial trust app domain: The type is not registered as safe".
Please suggest how do i get rid off this error as I've to use sand boxed solutions not farm solution.

Hi ,
According to your description, my understanding is that you got an error when you used visual web part solution in SharePoint 2013.
Whether you have enabled the web part solution in Site Collection Administrator->Site Collection features.
Whether there were some non-authorized methods called in your code.
Here are some similar posts for you to take a look at:
http://blogs.msdn.com/b/vincent_runge/archive/2010/05/12/support-answers-on-sandboxed-solutions-in-sharepoint-2010.aspx
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/8573ec4c-8fdb-40f5-b730-250174a08efb/sandbox-solutions-with-web-parts-upgrade-error?forum=sharepointdevelopmentprevious
http://sharepoint.stackexchange.com/questions/59679/sandbox-unhandled-exception-was-thrown-partial-trust-app-domain
http://scrum.codeplex.com/workitem/11222
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Not able to use Client Object Model in Visual Webpart SandBox Solution?

Hi,
I am trying to use client object model in visual webpart in sandbox solution but i am getting unexpected error but if i remove client object model code webpart works fine?
any help is appreciated.
Regards,
Gaurav Verma

Check this article for your answer
How to leverage the Client Object Model in a Sandbox Visual Web Part
Mark ANSWER if this reply resolves your query, If helpful then VOTE HELPFUL
INSQLSERVER.COM
Mohammad Nizamuddin

Resource Files in SandBoxed Solutions SharePoint 2013

Hi,
I want to create Resource files MyResource_en.resx and MyResource_ar.resx in the sandboxed solutions,how can i do that because as per my understandings we cannot access resource files from the App_GlobalResources folder in our virtual directory when working
on sand boxed solutions.
Can anyone suggest me the work around to use resource files in sand boxed solutions.

Hi,
According to your post, my understanding is that you wanted to create Resource files in the sandboxed solutions.
There is an article for your reference, although it is about the SharePoint 2010, it is similar to SharePoint 2013.
Embedding Resources in Sandbox Solutions
Per my knowledage, SharePoint sandboxed solutions are deprecated in SharePoint 2013 Preview in favor of developing apps for SharePoint.
I recommend to create App to achive what you want.
More information:
SharePoint 2013: Sandboxed Solutions are deprecated
SharePoint 2013: What to Do? Farm Solution vs Sandbox vs App
Build apps for SharePoint
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Visual webpart refactoring - ascx not getting updated

Hello,
I have created a visual webpart in one sharepoint 2013 project and then moved the webpart to another sharepoint 2013 project. It is getting deployed without any problem. The problem is the changes to my .ascx files are not reflecting when deployed..
any ideas?
Thanks,
Santhosh

Hi Santhosh,
Are you working on same UserControl webpart in another SP 2013 Project?
Also double check your project solution's webpart feature contains new webpart item. Because if your feature not contains moved webpart item then you can see latest webpart in your SP. So you have to add in feature.
Manoj | SharePoint

Adding Custom Webpart (Sandbox) to a page programmatically using CSOM

I'm trying to add a webpart(sandboxed) to a page programmatically using CSOM.
I've created a simple windows forms application and tried the below, it gives me error
Error: "A first chance exception of type 'Microsoft.SharePoint.Client.ServerException'
occurred in Microsoft.SharePoint.Client.Runtime.dll"- Server Exception occurred.
Additional Information: Cannot Import this webpart "
using (ClientContext context = new ClientContext("URL"))
Web web = context.Web;
File file = web.GetFileByServerRelativeUrl("/SitePages/Test.aspx");
LimitedWebPartManager wpMgr = file.GetLimitedWebPartManager(PersonalizationScope.Shared);
string webpartxml = "<?xml version=\"1.0\" encoding=\"utf-8\"?>" +
"<webParts>" +
"<webPart xmlns='http://schemas.microsoft.com/WebPart/v3'>" +
"<metaData>" +
"<type name=\"CustomVisualWebPartProject.VisualWebPart1.VisualWebPart1, CustomVisualWebPartProject, Version=1.0.0.0, Culture=neutral, PublicKeyToken=28942db35e131a1c\" />" +
"<importErrorMessage>Cannot Import this webpart</importErrorMessage>" +
"</metaData>"+
"<data>"+
"<properties>"+
"<property name=\"Title\" type=\"string\">CustomVisualWebPartProject - VisualWebPart1</property> "+
"<property name=\"Description\" type=\"string\">My Visual Web Part</property>" +
"<property name=\"ChromeType\" type=\"chrometype\">None</property>" +
"</properties>" +
"</data>" +
"</webPart></webParts>";
WebPartDefinition webPartDef = wpMgr.ImportWebPart(webpartxml);
wpMgr.AddWebPart(webPartDef.WebPart, "Left", 1);
context.ExecuteQuery();
Kindly let me know how to resolve it.
Thanks,
Pandiarajan

Hi,
I have the same issue with you, I also cannot add visual Webpart (Sandbox) to a page using CSOM,but I can add farm solution web part using CSOM, so I change it to farm solution web part.

SharePoint 2013 Query string parameter pass between visual webparts

Hi,
I have created one web part called Latest News in SharePoint 2013 which is
visual web part(Sandbox Solution).
In that, there is button called "Read More". Now when I click on that button I want to show only that item in the new page which is clicked using query string. but the data which will be shown after Read More button will be coming
from a different Visual Web Part.
How should I pass a query string value from one visual webpart to another visual webpart in SharePoint 2013 ?
Could anyone please help me like how we can pass.
Thanks in Advance.

Hi,
To pass information from one web part to another, we can use the consumer and provider web part with the
IWebPartParameters interface.
There are some articles about this topic, you can refer to them.
http://msdn.microsoft.com/en-us/library/office/ms469765(v=office.14).aspx
http://www.c-sharpcorner.com/UploadFile/40e97e/sharepoint-2010-connected-web-parts/
http://underthehood.ironworks.com/2011/03/how-to-build-a-consumer-web-part-in-sharepoint-2010-using-iwebpartparameters-that-works-with-html-fo.html
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Sharepoint Taxonomy Control in sandbox solution in sharepoint 2013

Hi,
We have requirement to bind termsets into taxonomy control using sandbox solution in sharepoint 2013.
I cannot use webpart,and APP. Below code added in aspx page in module.
i cannot write any code as this sandbox solution.
<%@ Register Tagprefix="TaxonomyField" Namespace="Microsoft.SharePoint.Taxonomy" Assembly="Microsoft.SharePoint.Taxonomy, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
%>
<TaxonomyField:TaxonomyWebTaggingControl ID="TWC" runat="server" SspId="08d413ac-c81d-4232-b1df-c2da46f9b21a" TermSetId="06c93fa1-8a76-4637-9b87-5e612276c199" AllowFillIn="true" IsMulti="false"
IsDisplayPickerButton="true" Language="1033" IsAddTerms="true" >
</TaxonomyField:TaxonomyWebTaggingControl>
This is able to render the control, where as termsets are not being displayed.
Please help on this.
-Navya

I don't think hard coding SSPID and TermsetID is a good practice. Try to get the values through code and using unique names.
<Taxonomy:TaxonomyWebTaggingControl ID="TWC" IsDisplayPickerButton="true"
AllowFillIn="true" runat="server"
ShowTaxonomy(TWC, TaxonomyGroup, TermSetName);
public static void ShowTaxonomy(TaxonomyWebTaggingControl control, string taxonomyGroup, string termsetName)
SPContext context = SPContext.Current;
SPSite site = context.Site;
TaxonomySession tsession = new TaxonomySession(site);
TermStore ttermStore = tsession.TermStores["TermStore"];
Group tgroup = ttermStore.Groups[taxonomyGroup];
TermSet productsTermSet = tgroup.TermSets[termsetName];
control.SspId.Add(ttermStore.Id);
control.TermSetId.Add(productsTermSet.Id);
control.IsAddTerms = false;
control.AllowFillIn = false;
control.IsMulti = true;
control.IsIncludeUnavailable = false;
control.Language = 0;
if(termsetName==Constants.UserKeywordsTermSet)
control.AllowFillIn = true;
control.IsAddTerms = true;
Bala

Could not load file or assembly AjaxToolkit error in SharePoint 2013 Visual Webpart

I wanted to use ajax controls in visual webpart for sharepoint 2013 so i followed steps.
1-I cut this snippet (see below) from <head></head> Section and paste in <body></body> Section for my master page since it's a requirement for SharePoint 2013 ajax functionality.
Snippet:




2-downloaded a latest ajax tool kit and then added ajax toolkit dll from the toolkit library in my solution's bin-->debug folder
now add ajax entries in web.config in these sections
in <SafeControls>
<SafeControl Assembly="ajaxcontroltoolkit, Version=4.1.7.1213, Culture=neutral, PublicKeyToken=28f01b0e84b6d53e, processorArchitecture=MSIL" Namespace="AjaxControlToolkit" TypeName="*" />
in <assemblies>
<add assembly="AjaxControlToolkit, Version=4.1.7.1213, Culture=neutral, PublicKeyToken=28f01b0e84b6d53e" />
in <controls>
<add tagPrefix="ajax" namespace="AjaxControlToolkit" assembly="AjaxControlToolkit, Version=4.1.7.1213, Culture=neutral, PublicKeyToken=28f01b0e84b6d53e" />
finally registered ajax in visual web part as
<%@ Register Assembly="AjaxControlToolkit" Namespace="AjaxControlToolkit" TagPrefix="ajaxtoolkit" %>
added following calender control
<asp:TextBox MaxLength="10" ID="txtToDate" runat="server" CssClass="FormTextBoxSmall"></asp:TextBox>
<asp:ImageButton ID="calReqDateTo" runat="server" ImageUrl="" />
<ajaxtoolkit:CalendarExtender id="CalendarExtender2" runat="server" targetcontrolid="txtToDate"
format="dd/MM/yyyy" popupbuttonid="calReqDateTo" />
reset iis and deployed my solution but when i deployed it throws error
"could not load file or assembly AjaxToolkit,Version=4.1.7.1213 "
please help

Hi,
In this below thread they have discussed and resolved your issue.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/60fa19fe-86a0-446b-b61f-11a82fe4287f/how-to-implement-ajax-toolkit-for-sharepoint2013?forum=sharepointdevelopment&prof=required
Please let us know if you need further details
Sekar - Our life is short, so help others to grow
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer

Deploy SharePoint 2010 Sandbox solution to SharePoint 2013

Hi All,
I have sand-box solution which is developed in Visual Studio 2010 for SharePoint 2010 ,And it is specially developed for branding the SharePoint 2010 site. Now I need
to add the sandbox solution to SharePoint 2013 Site.
Can any one help how can I do this.
Thanks, Quality Communication Provides Quality Work. http://siddiq-sharepoint2010.blogspot.in/ Siddiqali Mohammad .

Hi siddiqali,
According to your description, my understanding is that you want to deploy SharePoint 2010 Sandbox solution to SharePoint 2013.
Most of the wsp Solutions deployed in SharePoint 2010 should work fine in SharePoint 2013. This is because of the Support for both 14 Hive and 15 Hive directories that are Created in SharePoint 2013 by default.
Initially, when you deploy a SharePoint 2010 Solution it gets deployed to 14 Hive and not 15 Hive. To force the solution to install in 15 Hive you need to modify manifest.xml file of your solution and add addSharePointVersion=”15.0” attribute to it. The
Solutions can be forced to install in 15 hive. However, some of the files especially that refers to _layouts might not work. All SharePoint 2010 Solution files that refers to _layouts folder (i.e. Features, Layouts-files, Images, ControlTemplates)needs to
be updated, the best approach is to re-create the Solution in Visual Studio 2012.
More information, please refer to the link:
http://www.learningsharepoint.com/2013/03/24/deploy-sharepoint-2010-solutions-in-sharepoint-2013/
Here are some similar posts for you to take a look at:
http://www.threewill.com/2013/10/migrating-a-sharepoint-2010-solution-to-a-sharepoint-2013/
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/30fe4cb9-ea11-46d0-868d-4306d915b4db/how-to-convert-sp2010-wsp-to-sp2013?forum=sharepointdevelopment
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Creating Termset and terms in Taxonomy using Sandboxe Solution in Sharepoint 2013

I created a Sandboxed Solution, Added one Visual web part in that solution with one button control. Added Microsoft.Sharepoint.Taxonomy.dll Reference to the solution. Then in the button click event i wrote the following code:
SPSite site = SPContext.Current.Site;
            var taxonomySession = new TaxonomySession(site);
            var termStore = taxonomySession.DefaultSiteCollectionTermStore;
            lbl1.Text = termStore.ToString();
            var termStoreGroup = termStore.CreateGroup(txtTermSetGroupVal.Text);
            var termSet = termStoreGroup.CreateTermSet(txtTermSetCatNameVal.Text);
            termSet.CreateTerm("AAA", CultureInfo.CurrentCulture.LCID);
            termSet.CreateTerm("BBB", CultureInfo.CurrentCulture.LCID);
            termStore.CommitAll();
Then, I deployed this solution in one Publishing site. Added one new page in that site and Inserted this visual webpart in that page. When i click that button, I got the
following error,
Web Part Error: Unhandled exception was thrown by the sandboxed code wrapper's Execute method in the partial trust app domain: An unexpected error has occurred. Correlation ID: 49c1759c-5913-70a8-76e3-b2827260601a.[SPUserCodeSolutionExecutionFailedException:
Unhandled exception was thrown by the sandboxed code wrapper's Execute method in the partial trust app domain: An unexpected error has occurred.]

Hi,
The Yammer, OneDrive, Sites , My Sites and so on are buttons in the suite bar, the BROWSE, PAGE, SHARE etc. are the buttons in the ribbon, the two bars are added to the master
page automatically during the converting process.
A workaround is that we can hide the ribbon by using such a CSS code:
Best regards,
Patrick
Patrick Liang
TechNet Community Support

Sandbox solution in SP 2013

Is any big enterprise write any sandbox solution in SharePoint 2013? If any enterprise already developed Sandbox solution in a large scale manner what option they have now to migrate it to SP 2013?
Is Sandbox is implemented only for on-premise application? Or it is implemented for online also?
Plz share your exclusive real-time experience.

I think sandbox solutions are "stuck in the middle" right now. If you need full access to all of SharePoint, you must do a full-trust model. If you want total isolation, the new App Model does a better job of isolation. So sandbox solutions (to me) seem
like the bridge between the old full-trust model and the new cloud app model. The (few) companies that I have seen using sandbox solutions are using them because they are managing their own on-premise SharePoint farms with mature governance processes to allow
sandbox solutions to be deployed. If companies embraced this approach for 2010, it is still supported in SharePoint 2013. However, for new development, I would encourage you to take a look at the new Cloud App Model to see if your new development can match
this model. http://msdn.microsoft.com/en-us/office/dn448480
Andrew Connell does an excellent job on his blog outlining the characteristics of the three app models and when to consider each one.
http://www.andrewconnell.com/blog/Understanding-SP2013-Apps-aka-Apps-101

Asynchronous visual webpart for SharePoint 2013

HI,
How to create asynchronous visual webparts in SharePoint 2013 (VS 2012) . I can see lot of examples for 2010 version, but not for SP 2013.
I have 2 visual webparts, which I want to make it as a asynchronous webpart. One webpart has the code written in Javascript client object model(loads lot of images), another is a server side webpart which has a SPGridview.
Is there any sample code available for SP 2013?
Thanks

Hi,
Please try to convert the SharePoint 2010 project to SharePoint 2013.
http://sadomovalex.blogspot.kr/2013/02/convert-visual-studio-sharepoint-2010.html
In SharePoint 2013, we can create a visual web part, then we can use jQuery Ajax and REST API to achieve asynchronous data loading.
More information:
http://www.dotnetcurry.com/showarticle.aspx?ID=1009
http://asyncwebpartframewrk.codeplex.com/releases/view/52459
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

Error while deploying Sandbox Solution in SharePoint 2010 using Visual Studio

Hi,
I am creating a custom webpart as a sandbox solution.
While deploying I am getting an error
Error occurred in deployment step 'Retract Solution': <nativehr>0x80070005</nativehr><nativestack></nativestack>Access denied.
I have necessary permissions and part of admin group.
Please suggest what could be the issue.

Hello,
can you check if your account have access to the SharePoint_Config database? if it's still doesn't work, check if the used account is a local administrator of the machine
Best regards, Christopher.
Blog |
Mail
Please remember to click "Mark As Answer" if a post solves your problem or
"Vote As Helpful" if it was useful.

Activating Sandbox Solution in SharePoint 2013

Hi,
I am having a Single Server (Windows Server 2008 R2 Standard) with Microsoft SharePoint Server 2013 installed on it.
I have one CRM solution which is sandbox solution and I want to deploy it on site collection.
When i am going to SiteSettings > Solutions and upload the solutions and click on Activate button .. nothing is happening and solution is not getting activated. When I tried same with powershell using Install-SPUserSolution, I am getting below error,
Install-SPUserSolution : Object reference not set to an instance of an object.
At line:1 char:1
+ Install-SPUserSolution -Identity crmlistcomponent1.wsp -Site
http://in-mum-appcs ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
+ CategoryInfo : InvalidData: (Microsoft.Share...allUserSolution:
SPCmdletInstallUserSolution) [Install-SPUserSolution], NullReferenceExcept
ion
+ FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletInstallU
serSolution
Also, "Microsoft SharePoint Foundation User Code Service" Service is missing on Services On Server page so that I could
not start it. However I started "SharePoint User Code Host" service in services.msc
Please help me out, As I have got stuck in this problem from long back.
Thanks

From PowerShell, run:
Install-SPService
See if the User Code Service is visible on the Manage Services on Server page.
Trevor Seward
Follow or contact me at...
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Visual WebPart Sandboxed Solutions SP 2013 on Premise

Similar Messages

Maybe you are looking for