Viz Charts: Display Unit on Axis

Hi Friends,
I am creating a Column chart using Viz charts. I am not bale to make the units displayed next to axis. For example: USD or CMs, KMs etc. How can I get that?
regards
Krishna

Hi lucky,
As Visakh posted earlier, we can use format convert function in expression to display the proper format as we need.
Alternatively, we can set the data Number property to get the corresponding format. Please refer to the screenshot below:
If you have any questions, please feel free to let me know.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Similar Messages

Line chart cuts off x-Axis value

Hi All,
Have created a display to display an x-Axis value versus a Y-Axis value using a Line Chart. We want to maximize the chart space so we have removed the Legend from the display, problem is doing this cuts of part of the final x-Axis label and part of the final data point on the graph ? Why - can we move the borders out ?
Emmett

Emmett,
You can "Fake" some extra space out of the right side of the chart by setting the legend colors to blend into the background of the chart. This includes unchecking the "Use Pen Color?" box and setting the labels in the legend to match as well. Then simply set the legend to be whatever additional width you need. Other than this there's not really any other way that I can think of. Hope this helps.
Sam

Display Only X-Axis in the Column Graph in SSRS

Hi Guys,
I am trying to display the only vertical axis and want to hide the series in the new chart as per below highlighted section with blank color. Do you know what are the steps I need to follow? Thanks.
Warm Regards Badal Ratra

Hi Badal,
If I understand correctly, you only want to display X-axis and hide all series values in column chart. Based on my research, if we use expression or directly hide all the series values in chart, the chart will be empty when we preview the report.
One workaround is that we delete the series values in the Values pane, then the chart will only display the X-axis.
If there are any misunderstanding, please elaborate the issue for further investigation.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

MTA - CNMT Chart display issue

hi All,
I am having issue displaying all the 'Milestones' associated to a Network in CNMT.
Milestones created are checked with 'Trend Analysis' checkbox in 'Milestone - Basic Data' tab.
The activities are 100% confirmed and the Actual date of the activity is copied over to 'Actual date' field for the Milestone.
I checked the graph axis to display the 'Date range' which falls within the 'Actual Dates' of Milestones. It is showing only 'One' milestone, but not others (there are 2 more milestones which fall in the same date range and the activity is 100% confirmed).
Please suggest if I am missing something here.
-thnx in advance

Yes, I did create a new project version and Saved it Via CN41. The Data has been refreshed via Edit -> Scope of current data -> All fields in CN41. The chart is still showing only 'ONE' milestone.
Ex: The milestone currently being displayed in the chart is related to an activity which was confirmed on 26 Dec 2011. There are two more milestones related to two different activities which were confirmed on 30 Dec 2011, 10 Jan 2012. These are missing from the chart display.
Moreover, the system displays the following message:
Diagnosis
You have restricted the number of milestones to be displayed by using operative milestone data.
Procedure
To display all the milestones for the project, choose View -> Historical milestones.
SAP Library states:
Historical curve:
This standard view displays those milestones that have the MTA indicator set at the time of the current report.
These milestones are displayed across the entire reporting period, also when the indicator was not set for them at an earlier reporting time.
The Historical Curve is what I am assuming is needed to display all the Milestones on a particular reporting date. I checked in CNMT -> View -> Choose Dates, which shows the Milestones & Reporting times. I guess I am missing something else.
Please advise.
Edited by: sdn sap on Jan 13, 2012 8:40 AM
Edited by: sdn sap on Jan 13, 2012 8:41 AM

Disable sap.viz Charts Tooltip/Animation

Hey guys,
how can I disable the Tooltip resp. Animation of a sap.viz chart?
Btw: Is there any good tutorial/introduction in the sap.viz library?
BR
Christian

Got it. Disable different things in sap.viz in an XMLView like this:
    <viz:Line>

      <viz:toolTip>
        <vizTypes:Tooltip visible="false">
        </vizTypes:Tooltip>
      </viz:toolTip>

      <viz:xAxis>
        <vizTypes:Axis>
          <vizTypes:label>
            <vizTypes:Axis_label visible="false">
            </vizTypes:Axis_label>
          </vizTypes:label>
        </vizTypes:Axis>
      </viz:xAxis>

      <viz:plotArea>
        <vizTypes:Line>
          <vizTypes:animation>
            <vizTypes:Line_animation dataLoading="false">
            </vizTypes:Line_animation>
          </vizTypes:animation>
          <vizTypes:marker>
            <vizTypes:Line_marker visible="false">
            </vizTypes:Line_marker>
          </vizTypes:marker>
        </vizTypes:Line>
      </viz:plotArea>
</viz:Line>
Data Update is not animated anymore either :/
BR
Chris

XY chart display(multiple plots) --help required

Hi All,
I have problem in showing data(scale on y-axis)..on the xy-chart display...
Chart contains 2 plots...
1.length vs 1st Speed
2.length vs 2nd Speed..
my problem is with the scale on y-axis and plotting 1st speed and 2nd speed(on y-axis..) with respect to length(on x-axis)....
I attached my front panel window diagram for ur kind help....
I can able to view the plot on the chart....but the plot's are not like plots...they are plotting like in straight lines
One more Doubt ....in some chart if we right click it ..we can able to view the chart history length....
but in some chart ...why it's not appearing when we right click it ..
In that cases how we can set chart history size length...or how to enable the option.....
Regards
Rajasekar
Attachments:
speed251.vi ‏433 KB
Front-panel2.PNG ‏110 KB

Dear friend,
First i misunderstood the concept...now i am clear with the graph and chart concept..Since i am new user to Labview....
I need the xy-graph behaving like chart..with history length..(data acquistion type by serial)..
Now i am completed the task...with the examples comes from NI example finder..but i need clarification.....
I attached my vi...could u please see through it....
if u see the attached front panel diagram named front-panel.png file...in that the xy-chart is showing a straight line...
This is where i am facing problem...It should be continous instead of straight line....
Latter i find that this problem is because of history length problem of xy-graph.
so i added buffer.vi..(sub-vi) available in variable-time xy-chart example to overcome this issue..
Please say ur suggestion...
Attachments:
Front-panel2.PNG ‏110 KB
speedhistorylength26.vi ‏434 KB

Chart display and camera trigger

Hello,
I’m new to Labview and using it for my thesis to acquire data and initiate the image capturing of a camera. But I came across some problems with the data display and camera trigger, if anyone could offer some advice
My Hardware consists of a MC-USB-2404-UI DAQ-device (including MCCdaq-Drivers with Ulx-Libary and an extra LV vi pallet), a thermocouple type K and a TEMATEC pressure sensor MAP350-S / F (0-10V/0(4)-20mA). Since the DAQ-device supplies itself through USB with just 5V Power, I connected the pressure sensor in series with an additional 10V power supply unit.
The VI that I am constructing should read the measured values (pressure and temperature) and display them in a chart and on a numerical indicator. Above 200°C and 200bar the data logging should be manually started and a high-speed camera simultaneously triggered. Apart from the camera trigger, the VI is almost complete except for a few problems with measuring the value display.
Here are my problems:
1) How can I initiate the camera simultaneously with the data logging? Since the hs camera will capture more than 1000fps, I would restrict the image acquisition to a simple trigger that initiates the capturing. The appropriate VI’s IMAQ and IMAQdmx are already available. Should I create a new loop and connect it to my case-structure through a Rendezvous? And what kind of vi’s do I need for a simple trigger?
2) Also I couldn’t figure out how to convert 1D-Array of Waveform to DBL or at least how to connect the data wire with a numerical indicator. The indicator is crucial for the manual start of the data logging.
3) Another problem is with the chart display. As soon as I start the data logging, the graph disappears and the chart displays only n-samples of the currant loop pass. The enlargement of the chart length history brings no improvement. Before the data logging is started the charts are showing the all points from the start. So what changes when I Press “Aufnahme starten” (start acquisition)?
Any ideas would be much appreciated.
Attachments:
Blockdiagramm.png ‏153 KB
Frontpenal.png ‏172 KB
Temp+Druck_daqmx.vi ‏595 KB

Hello annaei,
thanks for your quik help... the numeric indicator is now implemented. thanks to you.
Explaination:
1) I have construkted an experimental vessel, which builds up pressure through a stamp. There is a heating jacket around it and on the bottom is a sight glass to capture the intirior with a highspeed camera. The starting conditions for the experiment are 200bar and 200°C. So I will need to monitor the current state of the intirior to know when i can start the actual data logging. With the data logging i want to start my image acquisition silmutaneasly.
3) For the Chart problem i attachted two pictures... After experimenting with the sample clock, reading vi and timing of the loop, i figured out that the greatest influence is the loop timing.
At 250ms (wait Xms multiple for loop pass) there is all data displayed even if i press the data logging button. At 100ms i was logging the data from 5s on and as one can see in the picture below the graph disappears after 28s. At 20ms loop pass interval the graph disappears randomly and with the data logging activated it is just a single point displayed.
In general the 250ms loop pass interval is a totally suitable solution for me, but i just can't help the feeling that the problem is not resolved. And i would like to know what i am doing wrong or what i could do better.
Thanks, Tobi.
Attachments:
mit 250ms multiple loop pass.png ‏171 KB
with 100ms multiple loop pass.png ‏160 KB
Temp+Druck_daqmx.vi ‏600 KB

Chart with custom y axis, with point values only c#

is there a way you can customize a y axis label to display only the points on a chart, or have both uniform intervals with custom values.
for example show the value of a line on a chart in the y axis at the exact point where the line appears on the chart.

Unfortunately your post is off topic as it's not specific to Microsoft Training and Certification.
This is a standard response I’ve written in advance to help the many people who post their question in this forum in error, but please don’t ignore it. The links I provide below will help you determine the right forum to ask your question
in.
For technical issues with Microsoft products that you would run into as an end user, please visit the Microsoft Answers forum ( http://answers.microsoft.com ) which has sections for Windows, Hotmail,
Office, IE, and other products.
For Technical issues with Microsoft products that you might have as an IT professional (like technical installation issues, or other IT issues), please head to the TechNet Discussion forums at http://social.technet.microsoft.com/forums/en-us, and
search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), please head to the MSDN discussion forums at http://social.msdn.microsoft.com/forums/en-us, and
search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here: http://community.dynamics.com/
If you think your issue is related to Microsoft Training and Certification and I've flagged it as Off-topic, I apologise. Please repost your question and include as much detail as possible about your problem so that someone can assist you further.
If you really have no idea where to post your question please visit the Where is the forum for…? forum http://social.msdn.microsoft.com/forums/en-us/whatforum/
When you see answers and helpful posts, please click Vote As Helpful,
Propose As Answer, and/or Mark As Answer
Jeff Wharton
MSysDev (C.Sturt), MDbDsgnMgt (C.Sturt), MCT, MCSE: Data Platform & Business Intelligence
Blog: Mr. Wharty's Ramblings
Twitter: @Mr_Wharty
MC ID:
Microsoft Transcript

How can I connect my MBA 11" 2012 to my Imac 21.5" mid 2010 as a display unit. Connected using a mini display port cable and this did not work. Any guidance welcome. Thanks. John

I bought a belkin mini display unit cable( new) and connected the thunderbolt port in the MBA ( 11" , mid 2012) to the Imac mini display unit port using this cable. Pressed the CMD & F2 keys on the Imac keyboard as required but this did not work. Should I try with another cable ? Should i try with a thunderbolt cable ( recommended by appple support ) -- but they too were not sure about this. Is the Mid 2010 21.5" Imac not able to function as an display unit? Any guidance would help and will be much appreciated.

Welcome to Apple Support Communities
Only the 27-inch iMac and Mid 2011 and newer iMacs can be used as an external screen, so you can't use your Mac as an external screen. See > http://support.apple.com/kb/PH11302
You can still use your iMac as an external display, using an application like ScreenRecycler

Problem with chart displaying data correctly

I have created a bar chart that displays data for each day of the month. The majority of the time this chart displays the information corrrectly. However now and again the bars of the chart appear much larger than they should meaning that instead of showing 30 or 31 seperate bars it can only display half that amount due to the increased size of the bars. If you display the same chart again then the problem will often disappear.
I am using Coldfusion MX 7 version 7.0.2 Enterprise Edition. Ihave installed all the latest updates up to Cumulative Hot Fix 3.

Hi,,
I have checked that the data being passed is correct and it seems to be. Chart code below.
Thanks
<cfchart chartwidth="700"
   chartheight="300"
   pieslicestyle="solid"
   show3d="no"
   showlegend="no"
   fontsize="12"
   xoffset="0.0"
         yoffset=".0">
<cfchartseries type="bar"
   query="chartquery"
   serieslabel="Date_Accessed"
   valuecolumn="namecount"
            itemcolumn="date_created">
    </cfchart>

Problem with Chart display in WAD

Hi All,
We have a Web Report in which we want to display the data in <b>table</b> format and also in <b>chart</b> format. We have two tabs : Data display and Chart display.
In Data display tab we want the data in table format and in the Chart display tab we want the data in Chart format.
Problem we are facing is that we are getting both table and chart displayed in the Data display tab. We want only the table in this tab and want to hide the chart which is coming there.
Please help me on this.
Thanks in advance,
Prakash

Try to use hide an unhide commands:
<a href="<SAP_BW_URL ITEM='GR' MULTI='X' HIDDEN='X' CMD_1='ITEM=GR1&MULTI=X&HIDDEN=''>
In this example, all Items containing GR are hidden and in a second step, all Items containig GR1 are displayed.
Regards,
Beat

Refresh Viz Charts

Hi,
I've a split App and I want to refresh the a viz chart in the detail view by selecting a different item of the master view.
My viz chart is built by calling the function showCharts of the detailController.
I've tried to refresh the model of the vizFrame but it doesn't work. Here is the code of the function in the master controller:
handleListSelect : function(evt){
var vizFrame = _grab('idVizFrameColumn');
if(vizFrame) {
vizFrame.getModel().refresh(true);
It seems that the function showCharts of the detailController should be called again, right?
How can I handle it?
Thanks in advance.
Best,
Matt

Hi,
I've a split App and I want to refresh the a viz chart in the detail view by selecting a different item of the master view.
My viz chart is built by calling the function showCharts of the detailController.
I've tried to refresh the model of the vizFrame but it doesn't work. Here is the code of the function in the master controller:
handleListSelect : function(evt){
var vizFrame = _grab('idVizFrameColumn');
if(vizFrame) {
vizFrame.getModel().refresh(true);
It seems that the function showCharts of the detailController should be called again, right?
How can I handle it?
Thanks in advance.
Best,
Matt

How can i display units only for the result set

hi
i do not want to display units (example: $ or %) for my key figure columns but i want to display units to the result.
how can i do that

Hi Surya,
I don't think it is possible to have both non-unit and unit in the same kf.
One potential workaround to do this is to create a calculated key figure/ formula that use the NODIM function for single values. Example: NODIM(0AMOUNT). Then, create a calculated key figure/formula that computes overall result on the same kf and supresses individual values but does not use NODIM....perhaps this can help you work out a solution.
Hope this helps.
Regards,
Petter
Message was edited by: M Petter

Pie chart display error

Hi
I created pie chart using CFCHART tag. In the chart display,
data values overlap on one another in the display. How to rectify
this error.
Kindly help me in this regard.
Advance thanks

I am using ColdFusion Report Builder 9 to generate a PDF, so there is no code to provide, but here is an example of my data:
fruit
count
apples
112
oranges
304
bananas
0
pears
0
grapes
16
strawberries
80
plums
48
pineapples
32
blueberries
16
raspberries
32
apricots
256
tangerines
705
cherries
1
peaches
0
With 'label column: fruit' and 'value column: count', when I select 'data label: pattern', for my pie chart, the labels overlap.

Chart displays real quick

I am using buffered data acquisition and i acquire at the rate of 20,000 samples per second and i write my data to a binary file. The problem is I view my data in a chart when recording the data. The chart is too fast, I want to reduce the speed of the chart say at around 2000 samples per second but i want to record data at 20,000 samples per second. Is there a way so that the chart displays my data at a slower pace?
Thanks,
Oxygen

see attached vi.
just pass the data array to the decimate function as illustrated.
Attachments:
Decimate array.vi ‏79 KB

Viz Charts: Display Unit on Axis

Similar Messages

Maybe you are looking for