VL/AO:Create Masterdetail @ same time ENSURE that Master is created first??
Hi,
I have for example an Order table and lines table with FK.(AO)
I i want to create a master record and some lines at the same time.
But If I call createInsert on the Master view then call createRow on the detail VO.
The detail lines are inserted first which causes a Violation error.
How can I ensure that master is created first..??
Do I need composition??
Please help. this should be something frequently asked??
Thanks
JO
Hello,
you can enable composition or check ADF Developers guide 4GL chapter 26.7 (Controlling Entitiy Posting Order).
Rado
Similar Messages
-
Basically I want to combine to clips with correct timings. For that I want to view the two clips overlapping each other, each being semitransparent to see both at the same time, so that I can decide where to stop of the first clip and start of the second clip? Thanks.
see my reply in your other post:
You're familiar with the TRIM-tool?
http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver1632caff
http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver1632d8e4
http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver1632d9ae -
In Logic 9, is there any way of editing the take folders of, say, 7 different drum tracks at the same time, so that each track has the same changes applied to its takes?
scottiewade wrote:
Thanks. I know how to select multiple tracks in the mixer, did that and put on group clutch,
Hi
Wrong..
To assign tracks to a group, click in the dark gray box just above the automation (Read/Write/Off etc) on a channel strip, and select the group number you wish to use. The first tim eyou assign a group, the Group Setting swindow will appear automatically, thereafter you need to click on the group area and choose 'Open Group Settings'.
Make sure that you have turned off Group Clutch (this disables all Groups)
Maybe this will help
http://support.apple.com/kb/VI248
CCT -
my ipad will not let me slide to log in, or power off. I have tried to hold down the sleep and home button at the same time, but that did not work. D o you have any tips for me? Thanks.
recovery mode
open itunes on computer
plug cable into computer not iOS device
turn phone off
hold home button and plug cable into phone. do not release home button until an itunes graphic appears on device.
look to computer should have message about recovery mode click ok and restore
Peace, Clyde
if u need an article see
http://support.apple.com/kb/HT1808 -
If you created your database manually, ensure that the catexp.sql or catalo
i am using express edition 11g express r2
i wanted to export and import a schema
22-2 Oracle Database Utilities
If you created your database manually, ensure that the catexp.sql or
catalog.sql script has been run. If you created your database using the
Database Configuration Assistant (DBCA), it is not necessary to run these scripts.
in my case i install the free express edition, and it installed every thing.
so how can i verify that catexp.sql or catalog.sql are required or not.
for export and import.
yours sincerely
Edited by: 944768 on Mar 31, 2013 6:06 AMHi,
Out of curiosity Just went through the script in question
Many objects are created when you run catexp.sql, so you can open catexp.sql(<oracle_home>\server\rdbms\admin) file and verify the objects in the scripts are already available in your database if its available the script has already been run.
You can find an insert statement at the end of the above script with "EXPORT_VIEW_VERSION', Querying the database_property table gives you EXPORT_VIEW_VERSION
{code}
select * from database_properties where PROPERTY_NAME = 'EXPORT_VIEWS_VERSION'
{code}
Don't know yet some other ways to verify ;)
Regards
Yoonas -
URGENT Select Query Returning No Records take same time as that of insert
Hello Everrybody,
I am facing a wierd problem...
I have table with 15 fields and I am selecting a record with some condition...
for e.g
select field1,field2,field3....... from tablea where field1=123
Now I have index on field1
When I do SQL Trace it show me time taken as
00:00:00:60 in oracle 817 SQL PLUS
and using
oracle 92 sql plus it show as
00:00:00:01 in oracle 817 SQL PLUS
Now Query is what does this 60 denotes milliseconds or what in oracle 92 and in oracle 817 sql plus.....
Also this query does not return any rows...
When I run the SP that insert records in same table...That sp take about same time as that of select returning no rows......
Why is ORACLE Taking so much time for that select ????
Please help.....8i measures timings in 100th of a second but I believe that 9i measures stuff in 1000th of a second. However, from your output it looks like SQL*Plus trace is rounding up to the nearest centisecond.
Time is a very poor way of judging performance when you're talking less than a second per operation. You'd be better off looking at CPU usage and IO activity.
Anyway, here are some questions for you to research:
(1) Is field1 a unique index?
(2) How many rows does this table hold?
(3) How fresh are the statistics on the table and the index?
(4) What's the explain plan? What's the TKPROF output?
(5) Are all of the above the same on both databases?
Cheers, APC -
If Two Users try to schedule a report at the same time does that lead to a Deadlock?
When Two users trying to access the same server and need to access the report for scheduling at the same time, does that lead to Deadlock Situation?
What are the Odd's in such scenarios?
Please help me understanding.
Regards,
ShivaWhen two users are say trying to schedule the same report at the same time - the relevant Job server has default capacity of running 5 concurrent jobs at a time (this value can be increased) - that means, it can run 5 schedules at the same time.
Let's say now two users have scheduled 6 reports - now the 5 reports that were scheduled will be in the "running" state but the server has only 5 concurrent job capacity so the 6th report schedule will stay "pending" until any one of the existing jobs are completed, and then the 6th report will start "running".
There is nothing called deadlock while scheduling. While viewing the reports, there are enough resources available in the BO system to make the report available for various users at the same time.
Thank you, Rahul -
Hello i opened logic 9 and logic x at the same time after that i lost audio in both programs i can only hear audio in the main output of my interface motu 828MKII
can somebody help me please? am in the middle of o project thank'sDid you reset Logic's audio preferences?
Did you do a hardware reset of the MOTU unit?
Try deleting preferences in Logic X
See my post in this message.
https://discussions.apple.com/message/24614057#24614057 -
Ensure that master data is unique across R/3 source systems within BW
Hello all,
I have an issue and don't have any clues for it.
I wait for your suggestions , please.
Problem: we must ensure that master data (represented by Info objects) is unique across R/3 source systems within BW
Thank you.Hi,
Refer the below links,
http://www.sap-img.com/business/load-master-data-hierarchies-from-r3-system.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/3a/d2a165ac873b42aba04475719679c4/frameset.htm
Hope it helps you,
Regards,
Ravindra. -
I have an hd movie on final cut pro x; i want to create an sd disk of that movie. compressor created 2 files: dolby.... and mpeg2. How do I get these files burned to disc to create my sd movie?
These are elementary streams and they would be used by DVD authoring apps that use them for reasons like foreign language capability. Examples would be DVD Studio Pro, Adobe Encore, Toast.
The most straightforward way to burn your DVD is either to use the Share feature in FCP or the Batch Template feature in Compressor.
If you can find a boxed copy of iLife (try Amazon), it should have iDVD as part of the suite of apps. iDVD offers far more complete authoring capability than FCP or C4. iDVD doesn't work with elementary streams; you'd just drag in your HD movie and you'd be good to go.
Good lluck.
Russ -
The display on my iPod Touch is HUGE and I have no idea why. I tried the HOME button and power button at the same time.....no help. I cannot enter my unlock code because I can't scroll without entering a wrong number! HELP!!
Using three fingers, double-tap the screen.
http://support.apple.com/kb/TS3129 -
Create an absolute time display that can be paused and scrolled
I have 3 waveform graphs that are scrolling by as the data is collected. They represent past events that can be paused, scrolled back, and printed. It represents 8 hours of data. I do not have a time stamp associated with the data going into the graphs at this time. I dont want to reinvent the Field Point code that is gathering the data just tweak the Host program that monitors the data (this would require flying to the customer site). I need to have a absolute time clock that will keep up with the data that is scrollong by and pause when the graphs are paused (that is the easy part). Here is my challenge. I am using a property node from all three graphs. I have the x scale-range-all elements tied together so they will all scroll together with 1 x scroll bar. I need to be able scroll the absolute time clock with the other information.
Any ideas?
AUTOM8Hi,
You can use the Get date/time function to get time when the data is recorded. However be advised that this time would only be close to the actual time of data acquisition. It will not be the actual time when the data was acquired.
As for scrolling the time display, I think yout best bet would be to tie in a time stamp (Get date/time function ) with the Y values that you are already acquiring. Then when you scroll to a particular point in the graph, you can programmatically unbundle the waveform at that point to get the time value.
Regards,
Ankita -
My manager is having a problem. "randomly" reoccurring meetings in outlook will after some time start showing as this:
"Exchange 2013 re-created a meeting that was missing from your calendar"
With all the "meat" of the body is missing.
We are running Exchange 2013 SP1 and Outlook 2013. They look the same in OWA. Meetings can be from different senders, different times etc.
Any thoughts?Microsoft have confirmed this is an issue with Exchange Online via the O365 Dashboard:
Current Status: Engineers have developed a fix and are currently testing to ensure successful remediation.
Customer Impact: Affected customers are experiencing issues with incomplete meeting information for a limited number of invites set to occur between the dates of August 7th, 2014 and September 12th, 2014. For the affected calendar invites, customers may see
meeting content replaced with a canned message stating, “Exchange 2013 has re-created a meeting that was missing on your calendar.” This issue is only affecting the body of the calendar invite for attendees, and not the meeting organizer.
Also, this does not affect the title, location, date and time, or the attendee list.
Workaround: As a workaround, customers can re-send affected calendar invites. Additionally, if the calendar invite contains Lync meeting information and the information does not appear in the message body, attendees may be able to use the ‘Join Lync Meeting’
button that appears in Outlook, Outlook Web App (OWA), and the mobile client to join the scheduled meeting.
Incident Start Time: Thursday, August 7, 2014, at 12:00 AM UTC
Preliminary Root Cause: A recent update to the service caused the Calendar Repair Assistant feature to misidentify some meetings on the attendee’s calendar as missing. By design, the feature recreated the meeting invite, including the title, location,
date and time, but replaced the body of the calendar invite with the canned message.
Next Update: Monday, August 18, 2014, at 4:00 PM UTC -
I currently use Snow Leopard because I like the way it preserves the operation of OS10 PPC programs. I have both an expensive CAD program and Adobe Photoshop CS3 which are PPC programs.
Can you launch your machine with Lion when you want to use that, and launch with Snow Leopard when you want that. Its too bad Lion does not support PPC OS10.Absollutely. This is a very common practice whenever a new OS or OS update comes out. By far the best way to do what you want is to install Lion onto an external firewire 800 disk, then boot off it when you want to use Lion and boot off your iMac's internal disk when you want to use Snow Leopard. USB 2 will work, but firewire 800 will be faster.
The second best option is to partition your iMac's boot drive, then use one partition for Snow Leopard and the other for Lion, but be sure to back up your boot drive to an external disk drive before you partition it.
You can switch operating systems during a restart by holding down the option key. -
I have been waiting for two days for an app to install on my iPad. Seems like something is stuck as it just keeps displaying "installing". Can not see where I can delete and start over and it's preventing me from updating or downloading any more games. Acts like a corrupt file or something. Can anyone help solve this problem? Thanks
Did anyone ever suggest you reset your PRAM?
http://docs.info.apple.com/article.html?artnum=2238
Also might want to try resetting the SMC, although I
doubt there's an issue there.
http://docs.info.apple.com/article.html?artnum=304123
I'm getting tired of people who supposedly know what
they're doing simply guessing that resinstalling the
OS might solve the issue. It's like trying to dissect
a frog with a sledge hammer, and wondering why you
didn't learn anything about anatomy in the process.
These sorts of things, although bizarre, should be
(and probably are) fixable without major surgery.
Thanks for the suggestion... but I think my first question would be why these parameters would need re-setting? This is a new machine... It has never been shut down hard. It is used at most 10 hours per week... mostly using Office 2004 for MAC. I need to figure this out as I will soon need it as a Cs2/CS3 - Aperture workhorse.
I too agree that it is best not to use a sledge when a scalpel is needed... but as a novice to the MAC world I may have been misled by Apple support. I seems to have fixed the symptoms ( some) but appears NOT to have addressed the cause... which is what I am after.
Would TechTool Pro detect a bad HD or RAM?
Thanks....
Maybe you are looking for
-
I have an iPod Touch (4th generation) and found i would like to switch it over to a new apple account. Is there anyway for this to happen without deleting any data?
-
I've been a CC member since the start; about 6 months ago the CC desktop app on my main desktop PC stopped showing the latest versions of most applications (for example Photoshop, Illustrator, etc., only showed the 'CS' version), and stopped giving m
-
VERY FRUSTRATED!!! Downloaded latest itunes on my PC, connected ipad 2, registered device. It says follow onscreen instructions. What instructions. When I turn on my ipad I get an itunes icon with an arrow and a connector cord. Can anyone help m
-
HUGE Photo Library with only 66 photos
Hello, I have only 66 photos in my all photos from Camera. However, when I go to manage storage, my Photo Library is 1.5 GB. I tried multiple options by connecting to iTunes and such. When connected to iTunes, the storage meter shows as 1.5 GB 650 Ph
-
Macbook pro 2011 battery dropped to 30% after 300 cycles
Hello , I have a Macbook pro early 2011 and I have noticed that the battery suddenly is draining too fast , after installing battery health it seems that in 2 weeks the battery dropped from 86% to 30% and there is the service battery sign Please help