The display on my iPod is extra large and I am have no idea why. I tried the HOME button and the power button at the same time but that doesn't work. I can't even enter my code to unlock it because I cannot scroll the HUGE display! Any ideas??
The display on my iPod Touch is HUGE and I have no idea why. I tried the HOME button and power button at the same time.....no help. I cannot enter my unlock code because I can't scroll without entering a wrong number! HELP!!
Using three fingers, double-tap the screen.
http://support.apple.com/kb/TS3129
Similar Messages
-
My phone is stuck on apple screen and i've tried to reboot it and connect it to my computer many times but it doesn't work. Can anybody help me?
This is covered in the basics section of the manual:
iPhone User Guide (For iOS 5.0 Software) -
my ipad is on an infinite loop. I used ios7 for a few days and then did updates on some of my apps. that's when the infinite loop started. I have tried pressing the power and home button at the same time, but it doesn't work. Please help!
I even tried some hints posted for ios6 (turn off Ipad, holding home button and plugging in power cord at the same time and then releasing the home button)
I did manage to get a different screen that shows the itunes icon and a power cord, but nothing happens.You were on the right track. You got the connect to iTunes screen and you ended to use iTujes to restore your iPad. Try recovery mode again.
Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad. -
My iCloud is disabled. I've reset my password numerous times, but that doesn't help. Can someone please tell me how can I log onto my iCloud
If your ID is disabled, you'll have to contact Apple for assistance, either by going to https://expresslane.apple.com, then click More Produces & Services>Apple ID>iTunes Store, App Store or Mac App Store>Disabled Apple ID, or by contacting the Apple account security team: http://support.apple.com/kb/HT5699.
-
my ipad will not let me slide to log in, or power off. I have tried to hold down the sleep and home button at the same time, but that did not work. D o you have any tips for me? Thanks.
recovery mode
open itunes on computer
plug cable into computer not iOS device
turn phone off
hold home button and plug cable into phone. do not release home button until an itunes graphic appears on device.
look to computer should have message about recovery mode click ok and restore
Peace, Clyde
if u need an article see
http://support.apple.com/kb/HT1808 -
My ipod 4th gen. has a white screen. i have tried pushing the two buttons but it didn't work. I have tried to restore on i tunes but because there is a pass code on the ipot, it won't let me. Any ideas?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software -
my iPod touch isn't working correctly.it is displaying a white light and no matter what i try it isn't helping.tries holding the reset and power button together and tryed holding the power button in but it doesn't work. please can someone help?
Try the remaining items in the white-screen topic of.
iPod touch: Hardware troubleshooting
If not successful. let the battery fully drain and then charfe for an hour and try again.
Frequently a white scree nis due to a hardware problem. -
I've got a touch iPod and for about a week now it's almost been permenently zoomed into the screen? I actually cannot get it to zoom back out. I've tried pulling the screen out with my fingers but that doesn't work. It's zoomed in on my home pages, on my music, settings everything! It makes simple things like deleting a number from my password login extreamly differcult. Please can someone help?!?! Thanks.
Double tap the screen with three fingers to un-zoom.
Then go to Settings > General > Accessibility > Zoom and turn this OFF. -
i am trying to complete a form but can't get to the final drop down question as it is not displayed because it falls below where my screen ends. i have tried changing the resolution but that doesn't work. any suggestions?
brilliant
google chrome works where safari doesn't on my macbook air. many thanks
i now have an embarrassing qu. have dowloaded spider solitaire (sad!) and i can't add cards at the bottom of a column for the same reason - the display cuts short. i have tried to extend it with the arrows in the bottom corners but it makes no difference. any ideas? -
I have a huge problem! I've forgot my Ipod touch password, so I tried it a few times! Now my Ipod is disabled. So I affiliated the ipod to itunes but it doesn't work, I can't restore it! So what should I do?
Place the iPod in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I can't seem to get my iMac (late 2009 model) into automatic sleep mode. If I manually put it into sleep I don't have any issues.
I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion. I now want to fix the underlying problem.
I'm not running any weird background processes and in my energy saver settings I've tagged "put the hard disk to sleep when possible:, "allow power button to put computer to sleep" and "automatically reduce brigthness". All pretty standard.
Is there anyone who can give me some pointers ?Today I solved the same problem for my iMac running Snow Leopard. See https://discussions.apple.com/thread/3008791#15947706. The method may help you, too.
For me it was the DynDNS Updater preventing my iMac from automatically entering sleep mode.
To my knowledge the cause of this sleep problem can only be a peripheral device or a process. So I suggest to first unplug all peripherals and test whether that's the cause. If not, I suggest to terminate one process after another and to test automatic entering of sleep mode after each. Start with user processes; continue with system process if necessary.
At least that's the way I found the offending process. Fortunately, I was able to change the configuration of that process to allow again automatic entering of sleep mode.
Good luck! -
I changed my password and used the new computer, next time I tried to log in it wouldn't accept the password. I tried the old one as well but that doesn't work either. Can anyone help?
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu. Enter resetpassword at the prompt and press RETURN. Follow instructions in the dialog window that will appear.
Or see Reset a Mac OS X 10.7 Lion Password and OS X Lion- Apple ID can be used to reset your user account password.
Be sure to open Keychain Access and repair the keychain:
Assuming that you are using a recent build of OS X, go to /Applications/Utilities and launch the app called Keychain Access. Go to the Window pulldown menu and select "Keychain First Aid". Enter your password, set the radio button to "Repair", and click "Start". -
ipod Touch 5th generation. I changed the original passcode and then forgot, so it says 'iPod is disabled'. It hadn't been synced with iTunes, so I switched it off, held home button, connected to Mac, did restore on iTunes twice but it doesn't work. Help!
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I'm not able to copy and paste files from my mac to hard disk and usb. I have tried dragging the items I want to copy to those devices but it won't work. I also have tried copying and pasting those files onto those devices too but that doesn't work too. Can any one help?
Hi BobRz
Thanks for you suggestion but it didn't work - are there other ways for solving this problem? Or is it because my files that I want to copy and paste onto my hard disk etc are too big? (However there is space on my hard disk and it works on a PC) -
Within music Library can anyone please explain why after I select the option to sort 'Album by Artist' a number of tracks are being treated as separate albums? How can I fix this? I have tried to manually correct by 'drag and drop' individual tracks but that doesn't work. My music library includes a number of repeat album artwork images simply because not all tracks are being listed under the one album making my library more difficult to use than it should. Any advise would be appreciated.
See Grouping tracks into albums.
tt2
Maybe you are looking for
-
I have a 21.5 inch Intel iMac mid 2011 and all has been working perfectly since November 2011 when I bought it. The problem I am having is that when using the software update application found under the appleysumbol on the upper bar, the application
-
Form personalization : sales order form (line) to make subinventory field mandatory
I have requirement to make sub inventory field mandatory in Sales Order Line, I tried using Form Personalization on 'When Validate Record' and making the fields required. But even though the field is showing as yellow but system allowing me to save t
-
Dead Time Capsule replaced by a refurb but now drops connection...
Hi Guys, I took delivery of Apple's replacement for my dead TC with the fried PSU. Sadly it's only a refurb and I'm having problems maintaining a connection to it via my iMac. It's connected via Gbit ethernet and I can mount the TC and the USB back-u
-
I just wanted to have a plain sheet of paper to type a letter with drag and drop icons. I chose Pages, word processing, blank sheet. I now have little boxes with plus signs, I can't move the text, I can't control the cursor. I am using Pages '08 on a
-
Menu Insert Function is often Greyed out
Hi New user of numbers and Forum. Have searched this to no avail sorry if inappropriate post. Insert>Function submenu is greyed out under all circumstances other than when a blank cell is selected (not even an "=" allowed). This makes it very tedious