VL01n with BAPI - how to crate Outbound delivery via BAPI with SerialNumber

Hi Guru,
    I have a lot of problem with Serial number manage, i had try to use BAPI_SALESORDER_CREATEFROMDAT2 but without results.
Plese explain me how can i manage Serial Numer in BAPI.
Manually i charge serial number in:
Transaction VL02N , in manu i select " EXTRAS" --> "Serial Number".
thank you in advance
Simone Maina.

I think(It's strictly my opinion), if a suitable serial number profile is maintained in plant/material then this assignment should happen automatically!!
**You gotta refer to a functional consultant. I am not very sure..

Similar Messages

  • How to create outbound delivery except bapi BAPI_DELIVERYPROCESSING_EXEC

    Hi,
    I have a problem with bapi BAPI_DELIVERYPROCESSING_EXEC.
    I use this bapi to create outbound delivery from delivery due list. But there is no shipping point as a parameter in this function module. So if there is two shipping point in a sales order, only one delivery is created for only one shipping point. How can I solve this problem.
    Or Can I create outbound delivery from a sales order with using bapi ?
    Thanks.

    I think(It's strictly my opinion), if a suitable serial number profile is maintained in plant/material then this assignment should happen automatically!!
    **You gotta refer to a functional consultant. I am not very sure..

  • Creating Outbound Delivery using BAPI

    Hi All,
    Can anyone advice is there any way to create Oubound Delivery using BAPI.
    If you have come accross with such developments or idea, can you please share your idea?.
    Thanks,
    Muruganand.K

    Hi,
    Use BAPI_DELIVERYPROCESSING_EXEC - Create Delivery from Delivery Due List
    BAPI_OUTB_DELIVERY_CONFIRM_DEC  BAPI for Outbound Delivery Confirmation from a Decentralized System
    BAPI_OUTB_DELIVERY_SPLIT_DEC   BAPI for Subsequent Outbound-Delivery Split from a Decentralized System
    BAPI_OUTB_DELIVERY_CHANGE
    BAPI_OUTB_DELIVERY_CREATENOREF
    BAPI_OUTB_DELIVERY_CREATE_SLS
    BAPI_OUTB_DELIVERY_CREATE_STO
    BAPI_OUTB_DELIVERY_SAVEREPLICA
    Also check
    BAPI for Outbound Delivery Creation with reference to Sales Order - VL01N
    BAPI / FM for Create Outbound Delivery for PO
    Outbound  Delivery User Exits
    EXIT_SAPLV50I_003              User Exit BAPI Outbound Delivery Replication
    EXIT_SAPLV50I_004              User Exit BAPI Outbound Delivery Confirmation
    EXIT_SAPLV50K_007              User Exit BAPI Outbound Delivery Replication (Outbound from Sender System)
    Function module: OIJ_EL_DOCG_CREATE_DELIVERY - Create outbound delivery

  • Bapi for vl01no create outbound delivery without order reference

    Hi Guru's, i need help, I'm looking for BAPI VL01NO
    Any suggestions?
    Thanks for everything
    Edited by: GaBo_s Gabo on Sep 22, 2009 8:48 PM

    Hi,
    Following is the sample code for creation of outbound delivery Using BAPI 'BAPI_DELIVERYPROCESSING_EXEC'
    Which may be helpful.
    PARAMETERS: p_vbeln LIKE vbak-vbeln.
    DATA: BEGIN OF t_vbap OCCURS 0,
    vbeln LIKE vbap-vbeln,
    posnr LIKE vbap-posnr,
    kwmeng LIKE vbap-kwmeng,
    matnr LIKE vbap-matnr,
    werks LIKE vbap-werks,
    END OF t_vbap.
    DATA: t_request TYPE STANDARD TABLE OF bapideliciousrequest
    WITH HEADER LINE.
    DATA: t_created TYPE STANDARD TABLE OF bapideliciouscreateditems
    WITH HEADER LINE.
    DATA: t_return TYPE STANDARD TABLE OF bapiret2 WITH HEADER LINE.
    SELECT vbeln posnr kwmeng matnr werks
    INTO TABLE t_vbap
    FROM vbap
    WHERE vbeln = p_vbeln.
    LOOP AT t_vbap.
    t_request-document_numb = t_vbap-vbeln.
    t_request-document_item = t_vbap-posnr.
    t_request-quantity_sales_uom = t_vbap-kwmeng.
    t_request-id = 1.
    t_request-document_type = 'A'.
    t_request-delivery_date = sy-datum.
    t_request-material = t_vbap-matnr.
    t_request-plant = t_vbap-werks.
    t_request-date = sy-datum.
    t_request-goods_issue_date = sy-datum.
    t_request-goods_issue_time = sy-uzeit.
    APPEND t_request.
    ENDLOOP.
    CALL FUNCTION 'BAPI_DELIVERYPROCESSING_EXEC'
    TABLES
    request = t_request
    createditems = t_created
    return = t_return
    READ TABLE t_return WITH KEY type = 'E'.
    IF sy-subrc = 0.
    MESSAGE e208(00) WITH 'Delivery creation error'.
    ENDIF.
    COMMIT WORK.
    READ TABLE t_created INDEX 1.
    WRITE: / 'Delivery ', t_created-document_numb, ' created'.
    Let me know if any issues.
    Thanks & Regards,
    Naveen

  • Change Bill-of-lading&package no in Outbound Delivery using BAPI or any FM

    Dear ABAP Gurus,
    How to change Bill of Lading(BOLNR) and Number of Packages(ANZPK) in Outbound Delivery using BAPI or some other Function MOdule.( BDC is not required for this).
    Regards,
    Rajesh

    MOVE 'BAPE_VBAP' TO lwa_extension-structure.
          lwa_bape_vbap-vbeln = lwa_final-vbeln.
          lwa_bape_vbap-posnr = lv_posnr.
          MOVE lwa_final-yyslotid TO  lwa_bape_vbap-yy_slotid.
          MOVE lwa_bape_vbap TO lwa_extension-valuepart1.
          APPEND  lwa_extension TO  lt_extension.
          CLEAR  lwa_extension.

  • How send an  outbound delivery and billing document by FAX

    How send an  outbound delivery and billing document by FAX

    Hi,
    http://help.sap.com/saphelp_nw04/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
    You have to create an RFC user for the RFC interface, so that you can receive messages in your SAP system. For each external communications system, create an RFC destination and a Node.
    You can add more systems, that is, create new nodes, even during operation. Since new Customizing settings may be necessary, you can branch directly from SAPconnect administration to Customizing (for example, to maintain the rules for recipient number adjustment).
    Outgoing messages are first stored in a queue. You have to schedule send processes so that the messages are sent from the queue to the external communications system. You can distribute incoming messages with inbound distribution using the recipient addresses.
    You can also change the default settings for confirmations of receipt in the Internet. You can specify a default domain to enable messages to be sent externally to users or objects to which no Internet address is assigned.
    The tools for monitoring and error analysis are available for monitoring sending. You can check the operating status of the external communication components in the SAP System and evaluate the send status of the documents. If errors occur, you can configure a trace that logs the processing of messages.
    An overview of the settings that you have to make in the SAP System in order to enable sending can be found in the documentation on External Sending in the SAP System.
    Hope this will help.
    Regards,
    Naveen.

  • Now that iCloud has done away with galleries, how can we share as I did with MobileMe? How can we sync non-Apple email accounts across multiple computers?

    Now that iCloud has done away with galleries, how can we share as I did with MobileMe? How can we sync non-Apple email accounts across multiple computers?

    You will need to find a third party solution for online storage in order to share things like photos with others. Some popular solutions to this are dropbox and sugarsync.
    You cannot sync non-iCloud email accounts across your iOS devices and computers unless they are IMAP accounts like iCloud. If they are IMAP accounts, you will do it in the same way as you have always done.

  • Hi guru's i want to dovelope or modify  bapi how we can give name for bapi

    hi guru's i want to dovelope or modify  bapi how we can give name for bapi plz help me...

    Hi,
    If u want to assign the form to Standard sales order, The, this form in the NACE.
    and the, Run from va02/03.
    Reward Points,
    Vamsi.

  • How to forward sms messages via email with date and contact received info

    Does anyone know how to forward sms messages via email with date and contact received info.
    Currently when I forward only the body copy of the sms message is sent in the email.

    This is not currently possible. Sorry.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Auto Packing in outbound delivery via IDOC

    Hello All,
    I got a requirement for Auto-packing in outbound delivery via IDOC process.
    Can anybody through some light on the above requirement in finding Message type, process code and so on...
    your every suggestion or hint will help me to fulfill the requirement.
    Thanks in advance.
    Best Regards
    Suresh.

    Hi,
    Auto Packing message type: SDPACK
    Process code: SDPA
    Basic type: SDPAID01
    Regards
    Suresh.

  • How to use Time Capsule via INTERNET WITH WINDOWS 7 SMB Cloud

    how to use Time Capsule via INTERNET WITH WINDOWS 7 SMB Cloud

    Get a vpn router.. I have no idea where you are in the world but you can find reasonable stuff for not too much money or even a general router that takes third party firmware like dd-wrt can run openvpn. 
    Set up the vpn router in place of the TC, as the main router in the network. Simply bridge the TC and place it behind the router. It will be accessible as part of the network via the vpn.
    This is the only safe way to do it via windows.
    http://www.dyncommunity.com/questions/18132/accessing-time-capsule-from-windows- 7-over-the-int.html
    If you google around I have seen posts about how to access TC by port forwarding SMB on the TC.. using a different port.. To me this is going to slow down the hackers by a day or two.. then they will discover the open port and access your network.. not just the TC.. they now have SMB access to everything. Don't do it. There is very little security on SMB.

  • How to change the pick quantity in outbound delivery using bapi

    Hi,
    I am using BAPI_OUTB_DELIVERY_CHANGE for changing the outbound delivery picking quantity but there is no field to change the pick quantity.
    plas advice any BAPI to change pick quantity
    Regards,
    Krishna

    Krishna....have a look in the below threads where there was a similar requirement..
    error while using BAPI_OUTB_DELIVERY_CHANGE
    change outbound delivery

  • How to create outbound delivery

    Hi gurus,
    How to create oubound deliver what are the prerequsite for it?,
    plz give me step-by-step procedure
    with regards,
    Thambe

    Hello,
    Your question is very general and a book can be written explaining the same. Please be more specific so ur question gets answered in an apt way.
    Outbound delivery can be created from the transaction code VL01N. It is always created against the shipping point(Place where all the shipping activities happen).
    Delivery has three process
    Picking, Packing, Post Goods Issue.
    U pick the goods, pack them and send them out of the factory premises(i.e., PGI).
    You can either create a delivery in reference to an order or with a sales order. 99 percent of the times, its against the sales order.
    When you create the delivery against the sales order, it picks all those line items which have same shipping point, Delivery Due date(calculated using availablity check), same incoterms, same route etc.
    Ask if u require any more information...
    rgds,
    Pavan P.

  • Error while doing PGI for Outbound delivery using BAPI BAPI_GOODSMVT_CREATE

    Hi All,
    I am getting an below error while doing PGI for outbound delivery using the BAPI BAPI BAPI_GOODSMVT_CREATE:
    Goods movement not possible with mvmt type 601
    Can anyone suggest me what will be the solution for it?
    Regards,
    Raghuraman.k

    I tried with the above BAPI but it is not working.
    In my case a delivery has one line item with batch split and other line item without batch split.
    Below is my code :
    DATA : gwa_header_data TYPE bapiobdlvhdrcon,
           gwa_header_ctrl TYPE bapiobdlvhdrctrlcon,
           lv_delivery     TYPE bapiobdlvhdrcon-deliv_numb,
           git_item_data TYPE STANDARD TABLE OF bapiobdlvitemcon,
           gwa_item_data TYPE bapiobdlvitemcon,
           git_item_ctrl TYPE STANDARD TABLE OF bapiobdlvitemctrlcon,
           gwa_item_ctrl TYPE bapiobdlvitemctrlcon,
           git_return    TYPE STANDARD TABLE OF bapiret2,
           gwa_return    TYPE bapiret2.
    *Header data
    gwa_header_data-deliv_numb = '0808000002'.
    *Header Control data
    gwa_header_ctrl-deliv_numb = '0808000002'.
    gwa_header_ctrl-post_gi_flg = 'X'.
    *Delivery Number
    lv_delivery = '0808000002'.
    *Item data and its corresponding control data
    gwa_item_data-deliv_numb      = '0808000002'.
    gwa_item_data-deliv_item      = '900002'.
    gwa_item_data-dlv_qty         = 4.
    gwa_item_data-dlv_qty_imunit  = 4.
    gwa_item_data-fact_unit_nom   = 1.
    gwa_item_data-fact_unit_denom = 1.
    APPEND gwa_item_data TO git_item_data.
    gwa_item_ctrl-deliv_numb      = '0808000002'.
    gwa_item_ctrl-deliv_item      = '900002'.
    gwa_item_ctrl-chg_delqty      = 'X'.
    APPEND gwa_item_ctrl TO git_item_ctrl.
    gwa_item_data-deliv_numb      = '0808000002'.
    gwa_item_data-deliv_item      = '900003'.
    gwa_item_data-dlv_qty         = 6.
    gwa_item_data-dlv_qty_imunit  = 6.
    gwa_item_data-fact_unit_nom   = 1.
    gwa_item_data-fact_unit_denom = 1.
    APPEND gwa_item_data TO git_item_data.
    gwa_item_ctrl-deliv_numb      = '0808000002'.
    gwa_item_ctrl-deliv_item      = '900003'.
    gwa_item_ctrl-chg_delqty      = 'X'.
    APPEND gwa_item_ctrl TO git_item_ctrl.
    gwa_item_data-deliv_numb      = '0808000002'.
    gwa_item_data-deliv_item      = '000020'.
    gwa_item_data-dlv_qty         = 10.
    gwa_item_data-dlv_qty_imunit  = 10.
    gwa_item_data-fact_unit_nom   = 1.
    gwa_item_data-fact_unit_denom = 1.
    APPEND gwa_item_data TO git_item_data.
    gwa_item_ctrl-deliv_numb      = '0808000002'.
    gwa_item_ctrl-deliv_item      = '000020'.
    gwa_item_ctrl-chg_delqty      = 'X'.
    APPEND gwa_item_ctrl TO git_item_ctrl.
    BREAK-POINT.
    CALL FUNCTION 'BAPI_OUTB_DELIVERY_CONFIRM_DEC'
      EXPORTING
        header_data    = gwa_header_data
        header_control = gwa_header_ctrl
        delivery       = lv_delivery
      TABLES
        item_data      = git_item_data
        item_control   = git_item_ctrl
        return         = git_return.
    BREAK-POINT.
    IF git_return IS INITIAL.
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    ENDIF.

  • BAPI or FM for Outbound delivery

    Dear Experts,
    We are in SAP 4.6C  and facing problem in creating outbound delivery against Sales Order, requirement is
    1. Create Outbound delivery against Sales Order where we need to change quantities and batches against Sales Order line items
    e.g. Sales Order may contain details as :
    Item 10    Product X1   Batch B1   Qty 10
    Item 20    Product X2   Batch B2   Qty 15
    We need to create delivery against above Sales Order line item with details as under:
    Item 10    Product X1   Batch B1   Qty 9
    Item 20    Product X2   Batch B2   Qty 7
    or in other case
    Item 10    Product X1   Batch B4   Qty 8
    Item 20    Product X2   Batch B3   Qty  7
    2. After Creating Outbound delivery with correct quantities we need to Post Goods Issue (PGI)
    again i am finding difficulty in finding a BAPI or FM to do this,
    other possible option could be a BDC
    Please suggest on any / both of these things (Please remember we are in 4.6C)
    Regards
    Dheeraj

    HI...
    Check this thread
    FM/BAPI  to create  Outbound Delivery  with  sales order  refference
    Even check this FM
    BAPI_OUTB_DELIVERY_CREATE_SLS
    BAPI_OUTB_DELIVERY_CREATE_STO
    Edited by: avinash kodarapu on Nov 30, 2008 1:14 AM

Maybe you are looking for