VL06 / LT0S create Transfer Order for Multiple Deliveries

Dear all,
My customer is used to create a WM Transfer Order for multiple Deliveries with transaction LT0S. The group that is processed here was created with VL06 / subsequent functions/ Group / Create with WM reference / TO for Multiple Deliveries.
-Currently I am trying to find a backway processing mode for this. Are Pickwaves a good alternative? Or will they generate TO' s per Delivery?
-My concern is this: Creating ONE TO is essential to keep the the picking route. With multiple TO's I will lose this. Creation of the group mentioned in the menu path above requires manual input such as giving a name for the group and checking the checkbox TO. for Mult.Del.
Thank you for your time.
Sandeep

Vinod,
Thanks for taking the time.
Have been able to have my Pick Waves generated in background jobs. However, not been able to process these Pick Waves in a single TO. Each delivery gets its own TO. So far Pick Waves have not proven to be an alternative to LT0s
I have not been able to find a setting -like the checkbox in VL06 K Group with WM reference, TO for Multiple Deliveries- that enable me to have ONE TO per Pick Wave.
Any suggestions?
Thanks,
Sandeep and Dave

Similar Messages

Creating Transfer Order for a Material document

Hi,
I am transferring the Unrestricted stock from one material to another material through Movement type 309.
I am creating a material document through BAPI_GOODSMVT_CREATE. Once the Material document is created and if the stock is in multiple storage types or storage bins, then I need to perform LT06. Instead of doing BDC recording I am using L_TO_CREATE_MULTIPLE function module for creating the TO. I am passing all the necessary values to this FM. TO is getting created but the Material document is not reflecting in that TO.
As per the configuration, movement type 309 will create the posting change only not the Transfer Requirement.
Does anybody have encountered the same problem?. If so please let me know how you have resolved the issue.
Regards,
Kishore.

Hello Kirankumar,
It is possible to assign external number ranges for Storage unit, so maintain storage unit number range to assign SU number externally.
Now when you create Transfer order for material document at that time you can assign SU number externally.
Hope this helps.
regards,
Arif Mansuri

Single Transfer Order for Multiple Handling Units

I have been researchig the ability to create a single transfer order for multiple handling units. My assumptions are if it can be done that:
1) A transfer order can have a single source, so if the source document for the handling unit (delivery) is different, that means different transfer order
2) A TO can have multiple materials (line items) with different destination bins and quantities per bin
I looked at the configuration for TO Split, but it's not clear that this will handle my requirement.
I also saw this http://aq33.com/material-management/Articles-005798.html and it also says that my requirement can't be meant. I'm just checking before I tell my customer this cannot be done.

Yes you are right, if Source document is different, you need to go with different TO.
But you can choose the Handling unit split, while creating a TO itself. i.e., You can quantify the goods for each handling unit.
Edited by: Ganesh M on Feb 29, 2012 6:20 AM

BAPI - Goods receipt and then create transfer order for a production order

Hello Everyone
We need to do goods receipt and then create transfer order for a production order (Material for WM scenario)
We are using BAPI 'BAPI_GOODSMVT_CREATE'
      i_items-orderid = wa_afpo-aufnr .
      i_items-order_itno = wa_afpo-posnr.
      i_items-mvt_ind = 'F'.
      i_items-stge_loc   = wa_afpo-lgort.
     i_items-stge_type = '901'. "wf_styp.
     i_items-stge_bin = wf_sbin.
      i_items-entry_qnt = wf_qty.
      i_items-entry_uom = wa_afpo-meins.
      i_items-entry_uom_iso = wa_afpo-meins.
      i_items-batch      = wa_zmobtag-charg.
      i_items-move_type = '101'.
      i_items-move_reas = wl_3131.
We are passing i_items (like line of goodsmvt_item) along with other parameters to BAPI and its creating material document and Transfer order automatically. Problem is the TO created is showing destination storage bin as default storage bin( from material master).
The field goodsmvt_item-stge_bin is just changing the Source bin details. There is no field for bin in the BAPI so that we can change the Destination storage bin as per our requirement.
My requirement : Creating material doc and then TO. Material should move to specified storage bin.
Please let me know any alternate way( No BDC) so that my requirement is achieved.
Regards
Swetabh

Hi ,
can u check these fields ,
STGE_TYPE_PC     UBTYP     CHAR     3     0     Storage type for transfer posting
STGE_BIN_PC     UBPLA     CHAR     10     0     Storage bin for transfer posting
Regards
Prabhu

Create Transfer Order for Consingment Pick up

Hey, is there anyone know how to create transfer order for consignment pick up.
I had tried it using LT06 by using GR material document but it didnt work.
Please i need the answer rather sooner than later.
Thanks

Hello,
Customer consignment pick is from customer consignment stock back to plant stock.. First of all check in MMBE whether stock exists for that material under customer consignment stock. You can check this in MMBE.
Your stock should be maintained in customer consignment and not in interim storage type.
Ideally your process shall flow like this
Sales order (KA-Consignment Pick up with item category as KAN & schedule line category: F0 & F1)>>Enter the order reason, material and quantity in sales orde & Save It>>Create Outbound delivery (VL10B/VL01N)>>Now Create Tranfer order to move the stock from consignment to warehouse stock>>Go to VL02N Choose from menu Subsequent Functions u2013 Create Transfer Order & Enter>>Add Storage bin if required>>Confirm the transfer order (LT12)>>Do the Post Goods Reciept (VL02N)
Now Check Consignment stock quantity with MB58 Add Material , Plant , Customer Execute
BR,
Tushar

Create transfer order for material document - 4.6C system

Hi Gurus
Can any one provide me the function module or BAPI to create transfer for material document in 4.6c system. I have to give input as supply storage type and bin and destination storage type and bin while execting the function module.
Thank you in advance
Regards
Sarath

Sarath,
Thanks for responding, I finally found my answere via Thread: create transfer order for material document - 4.6C system
Thanks again.

Create transfer order for moving storage units

Hello guys,
I need to create transfer order for moving storage units, the same with the transactions LT09, I found this FM 'L_TO_CREATE_MOVE_SU' but no work, somebody have an example for this FM, thanks a lot!

Hello,
I had the same problem today and I've fixed it by calling the FM in a different task (asychronous) .. this way the fugr/internal variables will be loaded again and you won't get this stupid error anymore.
CALL FUNCTION 'L_TO_CREATE_MOVE_SU' STARTING NEW TASK lv_task
In case you need it syncronous use PERFORMING clause together with WAIT UNITL
Hope this helps!
Cristian

Creating Transfer Order for Delivery with Specified Source Bin

Hello,
My requirement is to create a pick transfer order for an outbound delivery.
<b>L_TO_CREATE_DN</b> works perfectly well, however, it does not let me to specify the source (fixed) bin in my warehouse. It actually executes the bin determination routine to pick the source bin for me, which is not acceptable.
<b>L_TO_CREATE_SINGLE</b> won't work as my destination bin is a dynamic bin, and this FM does not allow to set LTAP-NKDYN.
So, I'm stuck. LT03 actually allows the user to input source bin information, so I'm saving BDC as my last option, but wanted to see if anyone here has other ideas.
Thanks in advance!
R.D.

Hi,
Try this L_TO_CREATE_SINGLE
Tks,
Krishna

Creating transfer order for delivery with ABAP

Hi Experts,
I'm using L_TO_CREATE_DN to create a transfer order for delivery note...
Is it possible to use this function or another one, to create a transfer order for one position of the delivery note ?
Regards,
David

Hi,
Try this L_TO_CREATE_SINGLE
Tks,
Krishna

How to create production order for multiple items having common raw materia

Dear all,
We are running a sheet metal fabrication company at Vadodara Gujrat.
Please guide us how to create single production order for multiple items using single raw material??
For example, We want to produce baby shirt(item code AAA001), shirt with full sleeve(item code AAA002), shirt with half sleeve(item code AAA003),shirt slim fit (item code AAA004),shirt loose fit(item code AAA005) from single raw material say(item code XXX001).
Right now we have to create 5 production order to produce above 5 items of single sales order in SAP B1 though it is made from single raw material which is foolishness and time consuming too. (Please also note that to produce any finfish good item, raw material required for that item may vary every time in our process.)
Kindly guide us how to solve the problem.
Thanks.
RUPESH +91-9227744273
WEB : www.gorasia.co.in

Hi Rupesh Gorashiya,
This is possible through MRP for that you have to put Sales Order first and Run MRP Wizard
MRP Wizard Put Multi Production Order as per Item Taking in Sales Order just click it on and execute.
Thanks,
Srujal Patel

Cancellation of Transfer Order for Grouped Deliveries (Outbound) -Urgent!

Hi SAP Experts,
One of our users created a group for several outbound deliveries. Now the user decided to cancel one of the deliveries for administrative reasons. He cannot cancel the delivery since a transfer order has been created. How can we cancel this TO and the delivery as well?
Please help us with this issue. This is an urgent matter. I am willing to assign points to helpful answers.
Thanks in advance!

Hello
Steps to reverse and delete delivery
1. With tcode VL09 reverse the PGI.. ( I hope u did this already)
2. Reverse TO with tcode LT0G
Here u enter WH no and delivery no to be reversed, Movt type 999 and putaway view as 'delivery view' and execute.
Select the line with delivery no and click on 'Return to stock'
this will again generate reversal TO, confirm it.
3. VL02N - Delete the delivery.
Hope this solves ur problem
Award points if found suitable
Amol

Bapi_po_create is not creating Purchase Orders for multiple records in file

Hi All.
iam trying to create contracts and Purchase Orders In me21n,me31k .
here iam using bdc for contract creation against services and using bapi_po_create for PO Creations.
in this process i could create contracts and POs for the first record in the file but for second record bapi_po_create couldnt create POs and the return table in bapi says
1.document contains no items.
2.no services or limits have been maintained.
wil be waiitng for r great answer.
bye.
regards.
seeta.

Hi Seeta Ram,
Did you pass the table PO_ITEM_SCHEDULES to BAPI_PO_CREATE with the coresponding Item numbers for each item in the table PO_ITEMS?
Regards,
Vitz.

GETWA_NOT_ASSIGNED during LT06 (Create Transfer Order for Mat.Document)

Hi all,
In LT06 transaction, after Generate TO Item, we try to save document. However we get "GETWA_NOT_ASSIGNED" error.
Information on where terminated
    Termination occurred in the ABAP program "SAPLLPRI" - in "PROTO_TAB_READ".
    The main program was "RLVSDR00 ".
In the source code you have the termination point in line 523
    of the (Include) program "LLPRIF00".
Unfortunately i couldn't find any proper OSS note or another solution.
I am looking for your recommends.
Thanks a lot.
Kaan

Hi Fren, I am getting the same error after the upgrade from 4.7 to 6.0.
for
            ZRLVSDR00
it gives error on
IF i_create_itab = con_x.
I got your solution but it was for RLVSDR00. How do I need to prooced for ZRLVSDR00.
Looking forward to hear from you.
Regards,
Ranjan A

Create Invoice for multiple deliveries

Hi ,
I want to create Invoice for multiple deliveries thru my prog.
I tried using RV_INVOICE_CREATE but it creates multiple invoices if I enter multiple deliveries.
I tried searching the forum but cud not get any solution for this.

Hi,
U can create single invoice for multiple deliveries if the following conditions are met
1)payment terms are same
2)billing dates are all same
3)and Payer
Go to VF01 and enter all the delivery document numbers and it will create a single invoice.
Or else goto VF04 and search all delivery documents,select it and click on collective billing document button. One single invoice will be created
regards.

How to create a B/D Order for multiple notifications?

Dear Sirs,
I would like to know how to create single order for multiple notifications of the same breakdown type.
Is it allowed to do so what are the advantages and disadvantages of the same.
Regards,
M.Boopathy

Dear Boopathy,
You can create a Maintenance Order with Ref. to a main notification thorugh Order Create icon in transaction IW22.
Once the Order is created, you can add remaining Notification in Object Links Tab in the Maintenance Order.
This is the standard way of attaching multiple Notifications to a single Order.
Kindly acknowledge if this answer helped.
Do let me know if you have any other query in the same.
Thanks.
Regards,
Avi

VL06 / LT0S create Transfer Order for Multiple Deliveries

Similar Messages

Maybe you are looking for