Create transfer order for material document - 4.6C system

Hi Gurus
Can any one provide me the function module or BAPI to create transfer for material document in 4.6c system. I have to give input as supply storage type and bin and destination storage type and bin while execting the function module.
Thank you in advance
Regards
Sarath

Sarath,
Thanks for responding, I finally found my answere via Thread: create transfer order for material document - 4.6C system
Thanks again.

Similar Messages

How to create Transfer order from material document uFF08Move type is 101uFF09

Hi all,
is there any function module, BAPI to create transfer order from a material document number？
I want to use FM L_TO_CREATE_SINGLE,but the result is "Movement type 101 for manual transfer orders does not exist".
Is the parameters error？
Thank you in advance
Regards

The error message you get is number 196 from message class L3, do a where-used on it from transaction SE91 and then put a break-point on each line result. Afterwards, re-execute your function call and see which break-point is hit and investigate from there.
With that said, you really should be using Bapi BAPI_GOODSMVT_CREATE for all goods movement operations. It shares code with MIGO and executes the same Badi's and user-exits, so data integrity is not broken. Don't forget Bapi BAPI_TRANSACTION_COMMIT to commit changes in the database after a successful call.
cheers

How to create Transfer order from material document

Hi gurus,
is there any function module, BAPI to create transfer order from a material document number.
waiting for positive reply.
thanks
vinod

Hi,
The FM L_TO_CREATE_SINGLE or L_TO_CREATE_MULTIPLE could solve your problem.
Hope it helps.
Chang

GETWA_NOT_ASSIGNED during LT06 (Create Transfer Order for Mat.Document)

Hi all,
In LT06 transaction, after Generate TO Item, we try to save document. However we get "GETWA_NOT_ASSIGNED" error.
Information on where terminated
    Termination occurred in the ABAP program "SAPLLPRI" - in "PROTO_TAB_READ".
    The main program was "RLVSDR00 ".
In the source code you have the termination point in line 523
    of the (Include) program "LLPRIF00".
Unfortunately i couldn't find any proper OSS note or another solution.
I am looking for your recommends.
Thanks a lot.
Kaan

Hi Fren, I am getting the same error after the upgrade from 4.7 to 6.0.
for
            ZRLVSDR00
it gives error on
IF i_create_itab = con_x.
I got your solution but it was for RLVSDR00. How do I need to prooced for ZRLVSDR00.
Looking forward to hear from you.
Regards,
Ranjan A

Creating Transfer Order for a Material document

Hi,
I am transferring the Unrestricted stock from one material to another material through Movement type 309.
I am creating a material document through BAPI_GOODSMVT_CREATE. Once the Material document is created and if the stock is in multiple storage types or storage bins, then I need to perform LT06. Instead of doing BDC recording I am using L_TO_CREATE_MULTIPLE function module for creating the TO. I am passing all the necessary values to this FM. TO is getting created but the Material document is not reflecting in that TO.
As per the configuration, movement type 309 will create the posting change only not the Transfer Requirement.
Does anybody have encountered the same problem?. If so please let me know how you have resolved the issue.
Regards,
Kishore.

Hello Kirankumar,
It is possible to assign external number ranges for Storage unit, so maintain storage unit number range to assign SU number externally.
Now when you create Transfer order for material document at that time you can assign SU number externally.
Hope this helps.
regards,
Arif Mansuri

Error during creation of transfer orders for material

Hi,
We are doing a transfer of stock from one storage with WM to a storage without WM.
But system does not finish the process automatically displaing the following error message:
"Error during creation of transfer orders for material document 49000XXXX"
System cannot find source storage bin
Thanks in advance for the help
Regard
Enzo

your picking strategy does not find the bin where the material is.
So you need to check what value you have entered for picking in WM view of material master.
then you have to check where your material is (storage type and bin)
then you need to check customizing to where what storage types are included in the picking strategy that is tight to the material master entry.

BAPI - Goods receipt and then create transfer order for a production order

Hello Everyone
We need to do goods receipt and then create transfer order for a production order (Material for WM scenario)
We are using BAPI 'BAPI_GOODSMVT_CREATE'
      i_items-orderid = wa_afpo-aufnr .
      i_items-order_itno = wa_afpo-posnr.
      i_items-mvt_ind = 'F'.
      i_items-stge_loc   = wa_afpo-lgort.
     i_items-stge_type = '901'. "wf_styp.
     i_items-stge_bin = wf_sbin.
      i_items-entry_qnt = wf_qty.
      i_items-entry_uom = wa_afpo-meins.
      i_items-entry_uom_iso = wa_afpo-meins.
      i_items-batch      = wa_zmobtag-charg.
      i_items-move_type = '101'.
      i_items-move_reas = wl_3131.
We are passing i_items (like line of goodsmvt_item) along with other parameters to BAPI and its creating material document and Transfer order automatically. Problem is the TO created is showing destination storage bin as default storage bin( from material master).
The field goodsmvt_item-stge_bin is just changing the Source bin details. There is no field for bin in the BAPI so that we can change the Destination storage bin as per our requirement.
My requirement : Creating material doc and then TO. Material should move to specified storage bin.
Please let me know any alternate way( No BDC) so that my requirement is achieved.
Regards
Swetabh

Hi ,
can u check these fields ,
STGE_TYPE_PC     UBTYP     CHAR     3     0     Storage type for transfer posting
STGE_BIN_PC     UBPLA     CHAR     10     0     Storage bin for transfer posting
Regards
Prabhu

Error during creation of transfer orders for mateRIA

hi gurus,
I am getting an error while moving material from sl0c2 to sloc1 which is connected to wh by mvmt 321. the document is getting posted and the stock is coming to sloc1,but the error is
"Error during creation of transfer orders for mateRIAL.how to correct the error.
regards
murugan

Hi,
The material is maintained at the Warehouse level, hence warehouse transactions have to be completed, by creating a transfer order and the confirmation of the same will create a transfer posting from SL1 to SL2 in the system. This is trigerred automatically depending on the sytem configuration.
Regards,
raghu

Create Transfer Order for Consingment Pick up

Hey, is there anyone know how to create transfer order for consignment pick up.
I had tried it using LT06 by using GR material document but it didnt work.
Please i need the answer rather sooner than later.
Thanks

Hello,
Customer consignment pick is from customer consignment stock back to plant stock.. First of all check in MMBE whether stock exists for that material under customer consignment stock. You can check this in MMBE.
Your stock should be maintained in customer consignment and not in interim storage type.
Ideally your process shall flow like this
Sales order (KA-Consignment Pick up with item category as KAN & schedule line category: F0 & F1)>>Enter the order reason, material and quantity in sales orde & Save It>>Create Outbound delivery (VL10B/VL01N)>>Now Create Tranfer order to move the stock from consignment to warehouse stock>>Go to VL02N Choose from menu Subsequent Functions u2013 Create Transfer Order & Enter>>Add Storage bin if required>>Confirm the transfer order (LT12)>>Do the Post Goods Reciept (VL02N)
Now Check Consignment stock quantity with MB58 Add Material , Plant , Customer Execute
BR,
Tushar

Create transfer order for moving storage units

Hello guys,
I need to create transfer order for moving storage units, the same with the transactions LT09, I found this FM 'L_TO_CREATE_MOVE_SU' but no work, somebody have an example for this FM, thanks a lot!

Hello,
I had the same problem today and I've fixed it by calling the FM in a different task (asychronous) .. this way the fugr/internal variables will be loaded again and you won't get this stupid error anymore.
CALL FUNCTION 'L_TO_CREATE_MOVE_SU' STARTING NEW TASK lv_task
In case you need it syncronous use PERFORMING clause together with WAIT UNITL
Hope this helps!
Cristian

Creating Transfer Order for Delivery with Specified Source Bin

Hello,
My requirement is to create a pick transfer order for an outbound delivery.
<b>L_TO_CREATE_DN</b> works perfectly well, however, it does not let me to specify the source (fixed) bin in my warehouse. It actually executes the bin determination routine to pick the source bin for me, which is not acceptable.
<b>L_TO_CREATE_SINGLE</b> won't work as my destination bin is a dynamic bin, and this FM does not allow to set LTAP-NKDYN.
So, I'm stuck. LT03 actually allows the user to input source bin information, so I'm saving BDC as my last option, but wanted to see if anyone here has other ideas.
Thanks in advance!
R.D.

Hi,
Try this L_TO_CREATE_SINGLE
Tks,
Krishna

Creating transfer order for delivery with ABAP

Hi Experts,
I'm using L_TO_CREATE_DN to create a transfer order for delivery note...
Is it possible to use this function or another one, to create a transfer order for one position of the delivery note ?
Regards,
David

Hi,
Try this L_TO_CREATE_SINGLE
Tks,
Krishna

VL06 / LT0S create Transfer Order for Multiple Deliveries

Dear all,
My customer is used to create a WM Transfer Order for multiple Deliveries with transaction LT0S. The group that is processed here was created with VL06 / subsequent functions/ Group / Create with WM reference / TO for Multiple Deliveries.
-Currently I am trying to find a backway processing mode for this. Are Pickwaves a good alternative? Or will they generate TO' s per Delivery?
-My concern is this: Creating ONE TO is essential to keep the the picking route. With multiple TO's I will lose this. Creation of the group mentioned in the menu path above requires manual input such as giving a name for the group and checking the checkbox TO. for Mult.Del.
Thank you for your time.
Sandeep

Vinod,
Thanks for taking the time.
Have been able to have my Pick Waves generated in background jobs. However, not been able to process these Pick Waves in a single TO. Each delivery gets its own TO. So far Pick Waves have not proven to be an alternative to LT0s
I have not been able to find a setting -like the checkbox in VL06 K Group with WM reference, TO for Multiple Deliveries- that enable me to have ONE TO per Pick Wave.
Any suggestions?
Thanks,
Sandeep and Dave

Error while creating sales order for material with another DIVISION

Hello Friends,
I have a problem with my sales order creation.
I have defined a new sales area 0010 / 10 / 01. I have the sales order type assigned to this sales area. (in VOV8 for the sales order type, in the 'General Control' the 'item division' is flagged.
Now, I have created the sold to party XYZ with all the partner functions defaulted same as the sold to party for the sales area 0010 / 10 / 01.
NOW, I have the material ABC with the DIVISION 10 in the basic data. I have extended the material to my sales org & dist. channel & plant.
Now, while creating the sales order for my sales area 0010 / 10 / 01 , I enter the sold to party XYZ - it is OK. But when I enter the material ABC, I get the error - "SHIP TO PARTY IS NOT DEFINED FOR SALES AREA 0010 / 10 / 10"
Please help to resolve the issue.
Edited by: Vivek on Aug 13, 2009 9:04 AM

Hi
Common division for Material Master data will not work
Because in the material master Division is a field not an organizational unit
Means when you create MMR you will give sales org, DC, Plant as organizational units and then enter but not division
Division is a field maintained in basic data and sales org data 1
This is the reason in t code you will find in t code VOR2 Common division only customer and conditions but not materials
But in t code VOR1 Common DC ,customer conditions and materials all there are available (you can check these t codes)
Coming to your issue Item div is clecked in your order type
This means the division in MMR has the priority or control for that order type
Your header division is 01 ( taken from customers sales area) and item division is 10 (taken from MMR as per your post)
So it differs
To process this order with Item div is clecked in your order type you need to extend your Sold to party ABC to the sales area 0010/10/10 (the sales area where the division of the material falls)
or alternatively
There should be a customer say DEF created in sales area 0010/10/10 who will be a ship to party ( your error is also the same)
for your ABC that is sold to party in sales area 0010/10/01 where the order is registered
Hope yopu are getting it
ABC in sales area 0010/10/01 will have or should have ship to paty DEF in sales area 0010/10/10
or
ABC should operate in in sales area 0010/10/10 too
If item division is not ticked then these are not necessary as the header division 01 will be valid for all items and syatem will not look MMR at all for division
Regards
Raja

How to create wave pick document and transfer order from that document

Hi All,
I want to create wave pick document based on delivery and correspondingly want to create transfer order for that. My requirement is that if in 3 delivery i have to pick material M1 as 100, 50, 100 qty then when i create wave pick for these deliveries and create Transfer order by this wave pick doc it should pick from single bin of warehouse , currently it is picking from 3 different bins though qty in each bin is more than 250 in each bin. Also suggest me the configuration requred for this.
Thanks in advance:

Hello Gordon, tha is working perfect now I finaly get the forecasted items in my MRP window If I click on show recommendations I see he recommends he wants to order some pcs, and Indd what I split in to Buy or Make is separated in an Production order. But how do I change the recommendations into orders?

Create transfer order for material document - 4.6C system

Similar Messages

Maybe you are looking for