VLAN not going to PIX

Briefly - I have intervlan routing for 3 vlans on a 3750 that need to go to PIX.
Example:
(ISP)
|
[Rtr]
|
[Pix]
|
[Cat3750] vlan10 mgmnt // vtp server
[2948] [2948]
vlan2 vlan3
route on Cat3750 is 0.0.0.0 0.0.0.0 <pix fa0/0 IP>
default route for switches is their respective mngmt vlan ip.
It looks like no traffic is passing to the pix interface from the Cat3750. (vlan's can talk, but no internet/NAT'ing taking place). The PIX "inside" fa0/0 is up, but not pingable.

ok, make sure that the pic is allowing ping to it's internal interface. The PIX routes to vlans 2 and 3 should be pointing to the interface vlan ip address. For example:
PIX fa0/0 -----fa0/1 3550
fa0/1 of 3550 belongs to vlan 3, for example, and has ip address 3.3.3.1/24 and PIX's internal interface have ip address 3.3.3.2/24, the PIX will have route to vlan 2 and clan 3 network that will point to 3.3.3.1. If 3550 have interface vlan 3, it should be able to ping 3.3.3.2 given that the PIX is allowing ICMP.
http://www.cisco.com/en/US/partner/products/sw/secursw/ps2120/products_command_reference_chapter09186a00801727a9.html#wp1026574

Similar Messages

  • Payment Term from Vendor is not going to Freight PO

    Hello All,
    I am not MM consulting but I need to solve a problem.
    As we know when I save a shipment cost document SAP creates a automatically PO for carrier as the configuration.
    I have the payment terms registered in the Vendor Master (Carrier) but when I save my ship cost document and the system creates the PO the payment terms it is not appearing in the PO and consequently is not going to MIRO.
    How should I do to take the Vendor Payment Term to the Freight PO?
    Thanks
    Marcos

    Hi,
       Ensure that the payment terms is maintained in the purchasing view in MK02 for the same purchasing organization.
       If its maintained, the same will be displayed in the automatic PO as well. If its not copied, please create a normal PO in ME21N and check whether the payment term is displayed in header - Delivery / Invoice tab.
       If you are in old release, refer the note: 358506 - Auto Service PO Creation - Passing Values into the Function
       If you are using TM system, refer the note: 1897588 - Payment terms not copied from Vendor master to PO
        If the notes are not valid, then you may check for OSS notes or raise an OSS ticket to SAP.
    Regards,
    AKPT

  • Videos Not Going On Macbook Pro

    I got a macbook pro in March before I left for vacation. I've been working on putting pictures and videos from a hard drive(I think lol) on to the macbook pro, but the problem is the videos won't go. Pictures go fine. is there a way to get videos to go on it. videos from ipod touch, and iphone go on fine. just on the hard drive not going on. Not a big deal, just hoping to get some of my videos on it for a project. If I can't I'll just use pictures and make a slideshow that way and use my other program on regular computer for videos

    I just purchased a 13" Mid 2012 MB Pro, first time on YouTube, the videos would not play, google "Adobe Flash", download and install the player and you should be good.

  • My iTunes says I owe $5.25 for songs that I have already paid for and am not going to pay for again but I want to get some apps from the store and now there's a hold on my account. Who do I talk to get the hold taken off

    I explained it most in my question but I am getting charged double for songs that I have already paid for and am not going to pay for twice because that is messed up. But I want to get some apps from the store and it wont let me because of $5.25. Who can I talk to about resolving this issue?

    You're right, it would have been covered under warranty. But because of the user damage, chances are there's a 200-something dollar fee . If you explain to them that it had a defect previously, they might replace it for you at no charge. **MIGHT**. But they would have to believe that it had a defect previously.

  • How can I delete the billing info on my phone? My card is expired and I'm not going to use another one

    How can I delete the billing info on my phone? My card is expired and I'm not going to use another one

    Tap on your id in Settings > iTunes & App Store and tap on 'View Apple ID' on the popup and log into your account  - that should give you a payments link on your account's page.
    Changing payment info : http://support.apple.com/kb/HT1918
    You might not get the 'none' option if you owe iTunes anything or if you have any pre-orders/subscriptions due : http://support.apple.com/kb/TS5366

  • How can i reset my app store setting? i have signed in and out with my own apple id but i used a different one at first and that one is not going away

    How can i reset my app store setting?
    I have signed in and out with my own apple id but i used a different one at first a few years ago and that one is not going away how do i change it to my own apple id?

    Content and Apple IDs -
    Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple ID to another. Apple does not merge Apple IDs. You will never be able to access your content bought with one Apple ID with a new Apple ID. Your only option is to delete the content and buy it again with the new Apple ID.

  • Workitem not going to a particular user id

    Hi,
    I am having a workflow container element APPROVERLIST which stores the ids of the users to whom a particular workitem should go. But for a particular user id , the workitem is not going to that person, rather it is going to some other user ids. I checked  if that id has been substituted but that is not the case.
    Are there some other areas where I can check exception?
    thanks in advance.
    Abhishek

    Dear all,
    I have checked all the above scenarios.
    There is no excluded agent existing . The bindings are correct. Let me describe the scenario little bit more in detail.
    APPROVERLIST is a workflow container element ( multiline ). This container element is populated in a particular task. This task fetches the user ids from a table and stores it here.
    In the next task which is a foreground task, in the "agents" APPROVERLIST is mentioned against EXPRESSION , so this workitem will go to all the users who are in APPROVERLIST.
    Agent assignment is maintained correctly. Its not working for one particular id. Is there any place to check this outside the workflow design?
    Also I checked the user id, it is existing.
    regards,
    Abhishek

  • WHEN Illustrator is likely to be adding "rotate view" tool, (like they have in Photoshop) or are they NOT GOING TO?!

    Hi everyone, I am trying to find out WHEN Illustrator is likely to be adding "rotate view" tool, (like they have in Photoshop) or if they are not going to do this at all.
    I hope someone from Adobe Illustrator reads these forums and responds. There is an existing thread that has no official response from Adobe, and it has literally tens of thousands of views!? Please Adobe Illustrator, can you give people the official response they need so they can plan their workflow.
    Apparently Affinity Designer is going to be adding a Rotate View Tool shortly and their app is only $50 one-off payment too, so perhaps you ought to respond before other people start making the switch? The rotate view tool is something illustrators really need, we already have it in Manga Studio, and it makes life so much easier. You can't really draw on a CINTIQ in vector form without it, at least not as well as you should be able to.
    Can you please update your paying customers so we can make an informed decision.
    Look forward to receiving a response.

    Tell Apple
    Apple - iTunes - Feedback

  • Emails from the organization are not going through ePrint

    Hi,
    I've been having some issues with the ePrint feature that's configured in one of the printers that we have in our office. The printer is a HP LaserJet 200 color MFP M276nw. Every other client from other email addresses such as Hotmail, Gmail or any other address are able to send emails to our ePrint address and are able to print on it successfully. However, all the emails that are being sent from within our organization are not going through. We get an unsuccesful delivery message from the Exchange server stating that 
    The server has tried to deliver this message, without success, and has stopped trying. Please try sending this message again. If the problem continues, contact your helpdesk
    We had checked with our Exchange administrators and they have advised that the email is trying to be sent, but in the destination it is being rejected. How can I get this issue to be addressed?

    Hello praveen_haridas,
    Welcome to the HP Support forums.  I understand that your corporate emails are failing when trying to send an email to the Laserjet 200 MFP 276nw printer's ePrint email address.
    Are you getting any messages about the failed messages in your ePrintCenter/HP Connected account?  If so what does the message state about the failed job?
    Thank you.  
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • HP Officejet 6700 Fax not going through

    When I try to send a fax, it dials but never connects?

    Hi @Carlita61,
    Welcome to the HP Forums!
    I noticed that the fax is not going through with your HP Officejet 6700. I am happy to look into this for you!
    What type of phone service do you have? Analog or digital? Analog. Digital. What’s the Difference?
    If the phone service is analog, please see this guide, Cannot Send or Receive Faxes.
    If the phone service is digital, please go to this guide, How to connect your HP Fax Device to an ISDN, ADSL, PBX, or VoIP line. Note: HP fax devices are designed to work with traditional analog phone services. They are not designed to work with digital phone services such as ADSL, PBX, ISDN, or VoIP. While HP fax products are not supported on these types of lines, they might work given appropriate setup and equipment.
    To find out if your phone service is analog or digital please contact your phone provider.
    Hope this information is helpful, and thank you for posting!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • My App Store is not working.a bingo blitz bar is being displayed and not going away.what is to be done to make App Store work again

    My App Store is not working.a bingo blitz bar is being displayed and not going away.what is to be done to make App Store work again.

    Hey Charyasmin,
    Thanks for the question, and great troubleshooting so far. You’ve definitely taken the proper first steps. To continue to troubleshoot, the following articles may help:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Thanks,
    Matt M.

  • Why when I am downloading music off iTunes it's not going on my music? It says it is downloading and that its done then I go into my music and nothing is there

    Why when I am downloading music off iTunes it's not going on my music? It says it is downloading and that its done then I go into my music and nothing is there

    Did you go to purchased  in itunes check if you have bought it.

  • Service Account details are not going through header(OSB Business service)

    Hi
    I have an issue with service account. Assume I have a proxy service A, Business Service B, Proxy service C.
    A invokes B and B invokes C (A --> B --> C). All calls are through http protocol.
    I created a service account with userid and password details and attached it to the Business service B(Static for basic authentication).
    Added log activity in proxy service C for context variable $header to verify whether userid and password are coming through request header or not.
    I executed proxy service A from sbconsole but I couldn't see userid and password details of created service account in the logs. Only nemespace are logged in the file.
    <soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"></soap:Header>>
    Can someone please help me why service account details are not going through business service request. Am I missing any steps?
    Thanks in advance
    KK
    Edited by: 966531 on Oct 23, 2012 4:23 AM

    Basic authentication information is stored under transport headers (check $inbound) whereas $header is populated for message headers (for e.g. - SOAP headers), so you should be checking $inbound instead of $header
    Regards,
    Anuj

  • Hellow my i pod is not working.actually bettry was too low then i puted on charging.it starting charging but not going to power on.when it tried to starting on sunndly after the apple logo it showd the 5 % bettry and went back off and this proses is carry

    hellow
    my i pod is not working.actually bettry was too low then i puted on charging.it starting charging but not going to power on.when it tried to starting on sunndly after the apple logo it showd the 5 % bettry and went back off and this proses is carry on.plz help me how it witt work starting.i urgently need to on my i pod.plz help me plzzzzzzzzzzzzzzzz

    Hi there shehla sattar,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iPad: Basic troubleshooting
    http://support.apple.com/kb/ts3274
    -Griff W.

  • Computer not going to sleep when lid closed

    My wife's new MacBook Air has a couple of problems we can't figure out.  First sometimes the computer is not going to sleep when lid is closed and when we lift the lid everything is frozen.
    Second, the user Library folder is not seeable in her user account.  I know it's there because on the side bar there's a short cut to Preferences folder which we can open.
    Strange behavior.
    Thanks,
    Ron

    Ron,
    The user library folder (~/Library/) is hidden by default in Lion. I assume Apple doesn't want people mucking around with the sensitive files in there. So this is normal behavior.
    As for the freezing issue, I would suggest you reset your power management and perform a safe boot to clear out caches. You should also see if the issue persists after disconnecting USB perhipherals.
    Here's how:
    Power Management:
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
    Safe Boot:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).

Maybe you are looking for