Vld 3064 error

Hi readers,
While validating location , i am getting the following error message :
VLD-3064: Owning and referenced locations of this connector are on the same database instance. Unless explicitly referenced in configuration settings, no generated code will use the database link resulting from deployment of this connector .
Please send your valuable inputs to resolve the issue.
Regards,
Davis

Hi Davis,
Is that message really an error? I believe that it is just a warning to a situation where a dblink, that connects a "source database" to the same target database (a different schema on the same instance?), has been deployed.
to my knowledge OWB only uses dblinks when the source and target exist on different databases.
anyone please correct me if I'm wrong.
Best regards,
Bruno

Similar Messages

  • OWB VLD-2750 error

    Hi!
    Could someone please help.
    I am geting a VLD-2750 error in a MAPPING .. as I have specified an update in theloading specifications of the table.
    It needs a where clause! ? .. where do I put this where clause?
    In the Mapping table properties,in the conditional loading section, I am doing a match by constraint .. is it becuase of that! .. Please Help!
    Kind Regards
    Saif

    Saif,
    Yes, the where clause is generated from the "Match by constraint" property of your target table. It is inherited from a primary key or a unique key of the target. Most likely you don't have a primary/unique key defined on your target table. In order to find out, open the target object in an editor, select table properties from the menu and check out the constraints.
    If you change the table in the editor, make sure you do a reconcile inbound on the mapping object in order to get the latest definition of the object in your mapping.
    Nikolai Rochnik

  • Vld 004 error - partition key has less than 2 partitions defined

    HI All,
    i have created a new table with a partition on one colunm. when i am trying to validate the table in owb, i am getting the vld-904 - partition key has less than two partitions defined error.
    please help.
    thank you.

    Hi,
    Oracle DB requires that a partitioned table has at least 2 partitions. That is why you get an error from owb, the table creation would fail anyway.
    Regards,
    Carsten.

  • MMM1064 & VLD-1141 Errors

    I have several mappings that are producing an "MMM1064: Value SADI_DW_LOCATION not valid in domain DB_LOCATION2" error when I try to validate them. In this scenario, "SADI_DW_LOCATION" is my defined location and I have no idea what "DB_LOCATION2" is. These mappings have validated and deployed successfully in the past but will not now. I have checked and rechecked all the location information and nothing has changed or is incorrect (at least that I can see).
    To add injury to insult, if I just try to deploy one of the aforementioned mappings, I get the following.
    VLD-1141: Internal error during mapping generation.
    MMM1064: Value SADI_DW_LOCATION not valid in domain DB_LOCATION2.
    at oracle.wh.repos.impl.environment.CMPLogicalLocationChoices.decode(CMPLogicalLocationChoices.java:218)
    at oracle.wh.repos.impl.extended.CMPWBScalarProperty.setValue(CMPWBScalarProperty.java:124)
    at oracle.wh.repos.impl.extended.PropertyHelper.setScalarPropertyValue(PropertyHelper.java:807)
    at oracle.wh.repos.impl.extended.PropertyHelper.setScalarPropertyValue(PropertyHelper.java:797)
    at oracle.wh.repos.pdl.foundation.OWBRoot.setScalarPropertyValue(OWBRoot.java:4877)
    at oracle.wh.repos.impl.foundation.CMPElement.setScalarPropertyValue(CMPElement.java:1515)
    at oracle.wh.repos.sdk.mapping.WBBaseMapOperatorDelegate.setScalarPropertyValue(WBBaseMapOperatorDelegate.java:500)
    at oracle.wh.repos.sdk.mapping.WBMapHelper.setStringProperty(WBMapHelper.java:688)
    at oracle.wh.service.impl.mapping.component.AccessInfo.<init>(AccessInfo.java:88)
    at oracle.wh.service.impl.mapping.component.keylookup.KeyLookupSqlDelegate.prepareOutputContext(KeyLookupSqlDelegate.java:65)
    at oracle.wh.service.impl.mapping.generation.WBMappingGenerator.generate(WBMappingGenerator.java:239)
    at oracle.wh.service.impl.mapping.generation.PlSqlGenerationMediator.assembleSetBasedInternal(PlSqlGenerationMediator.java:2098)
    at oracle.wh.service.impl.mapping.generation.PlSqlGenerationMediator.assembleSetBased(PlSqlGenerationMediator.java:2080)
    at oracle.wh.service.impl.mapping.generation.PlSqlGenerationMediator.assemble(PlSqlGenerationMediator.java:532)
    at oracle.wh.service.impl.mapping.generation.WBMappingGenerator.generate(WBMappingGenerator.java:770)
    at oracle.wh.service.impl.mapping.generation.WBMappingGenerator.generate(WBMappingGenerator.java:316)
    at oracle.wh.service.impl.mapping.generation.WBDeployableMappingGenerator.generate(WBDeployableMappingGenerator.java:99)
    at oracle.wh.service.impl.generation.common.WBGenerationService.generateCode(WBGenerationService.java:433)
    at oracle.wh.service.impl.generation.common.WBGenerationService.generateCode(WBGenerationService.java:311)
    at oracle.wh.service.impl.generation.service.WhValidationGenerationTransaction.run(WhValidationGenerationTransaction.java:241)
    I have found this error message elsewhere and tried some of the recommendations to no avail (i.e. copy and paste mapping, recreate mapping, rename mapping, etc).
    Each of the mappings are generally simple. One source table, a few lookups, an expression, a constant, and one target.
    OWB Version 10.2.0.1.31

    I've just encountered my first MMM064. The text:
    2F787D6BF242207EE0430A111258207E:DWH_LOC not valid in domain DB_LOCATION2.
    The error seems to be related to a nested pluggable map that I've built.
    I get the error when I try to add my (standalone) nested pluggable map to an existing map. When I do the same for a new map I do NOT see the error....
    Hope this helps...

  • VLD-1111 Error

    I have a mapping that generates PL/SQL. I was using a Constant Operator to populate a date column with sysdate. I decided to change this toi a Data Generator Operator and got the following error message.
    VLD-1111: This mapping cannot be generated because it contains a combination or sequence of operators that are invalid.
    It seems that the Data Generator Operator is incompatible with PL/SQL mappingswhich seems rather strange to me. Does anyone know what's going on here?

    My only problem with using a constant is that you get exactly the same date/time for each row rather than the actual date/time the row was inserted. This is because Oracle sets up a constant with the value of sysdate in the PL/SQL code it generates. This as you would expect.
    I've actually now decided to use the Mapping Transformation operator bound to the sysdate function. This seems to work just fine.

  • VLD-6328 error : Use a flat file as Source in a mapping in OWB 10.2

    Dear all,
    I have created a simple mapping using a flat file in a remote server as a source and a simple table as a target.
    When I try to validate the mapping I get the following warning:
    "VLD-2398: No data file specified. Generated code will use the sampled file name and the file location xxx"
    I use the version 10.2 and I cannot find "Sources" or "Targets" when I use the "Configure" options.
    Any help will be appreciated

    Hi all,
    If you want to validate correctly this mapping you must to :
    1. Right click on the mapping, then Configure
    2. Right click on Sql Loader Data Files, then Create
    3. Verify that the location name is correct and complete the Data File Name
    4. OK
    The validation is now OK.
    I hope it will be help you
    Best Regards
    Samy

  • Error VLD-0370  add a new dimension  to a cube

    Hello together!
    I have a little Problem with my OWB 11.2.0.3 on a new machine. We run OWB 11.2.0.3 on different machines, but on our new machine I have a little problem with ROLAP -Dimensions. I imported my Rolap Dimensions an Cubes from a other machine, all works fine (validate, deploy) but when I genereate a new ROLAP - Dimension the wizzard, vallidation ok, and add it to the cube. I get VLD-0370 error.
    VLD-0370: Für Cube CUB_MEMBER_TRANSACTION_R, Dimension TEST_DIM ist die Referenz nicht an Spalten einer Tabelle oder aktualisierbaren View gebunden.
    Eine Cube-Dimensionsreferenz muss an Spalten einer Tabelle oder einer aktualisierbaren View gebunden werden.
    It must be something like this:
    VLD-0370:For CUB_MEMBER_TRANSACTION_R Cube, Dimension TEST_DIM the reference is not bound to columns in a table or updatable view.
    A cube dimension reference must be bound to columns of a table or updatable view.
    I cannot create a new dimension ans add it to the cube on the new machine. Don't know why. All locations are fine.
    A problem is, I don't find a list or something like that for the VLD-xxxx with hints what to to like the ORA-xxxx.
    Thanks a lot from Berlin
    Michael

    Hi Michael,
    The cube has a table related, you have added the dimension to the cube, but the table needs a new column with a foreign key to the table-dimension. When you are modifying an existing cube this is not automatic, you have to add the column and foreign key manually.
    Regards
    ANA GH

  • Error VLD - 5005 when validating the map

    Using Datawarehouse builder 10.2 i have the following problem.
    This is the scenario:
    I have a dimension with one level and no hierachy and i want to do a mapping between a table and that dimension.
    Table has three atributes:supplier_id;name_sup;adress_sup.
    The dimension(which passes the validation) as four, three of type business to store information from the table atributes and one of the type surrogate(all these atributes belong to the same level).
    When validating the mapping I have this error:
    VLD-5005: no updatable inputs connected for dimension level "DIM_CUSTOMERS.LEVEL1"
    Details: At least one updatable input must be connected for level DIM_CUSTOMERS.LEVEL1, or the generated code will fail. paraent reference key and level natural key inputs are not updatable attributes in the target
    If I change dimension loading type to remove(instead of load) the validation is sucessful but the map doesn't work.
    Could anyone please give me a sugestion.
    João Costa
    Student of informatic engineering (University of Coimbra)

    Hi!
    could you explain that a little more please? (I.e. "make one of your source table attributes non-business"). I thought you could add the 'business' tag to attributes in the dimension, but I cannot see how to do that to the source table that is loading the dimension.
    FYI, I am trying to add an 'all-levels' category-type top level to a dimension hierarchy where the true source data goes
    L1>L3
    L2>L3
    L3to make the result
    L-CATEGORY>L1>L3
    L-CATEGORY>L2>L3
    L-CATEGORY>L3
    This is intended to combine source data from two sources, Products and Services. Products have two unrelated Type levels above them. Services have no Types. I thought I might be abow to create a mapping per source, and use a Constant to insert a Category attribute (business key) of either 'PRODUCT' or 'SERVICE' per mapping. My thinking was to use two seperate loads to the dimension. However, the first one generates the VLD-5005 error. I'd sure appreciate some help with theis fix.
    Do you know a better way of doing this?
    Also, is there a list/manual anywhere of all error messages for Paris?
    Cheers,
    Donna

  • Error while deploying or validating a mapping

    Hi!!
    I have a very strange problem. I try to deploy a mapping (I have changed today and i didn´t modify long time ago) and i get the next error:
    VLD-1141: Error interno durante la generación de correspondencia.
    java.lang.NullPointerException
    at oracle.wh.service.impl.mapping.generation.MapOperatorGenerationDelegate.checkBinding(MapOperatorGenerationDelegate.java:554)
    at oracle.wh.service.impl.mapping.component.entity.EntityGenerationDelegate.checkBinding(EntityGenerationDelegate.java:90)
    at oracle.wh.service.impl.mapping.generation.MapOperatorGenerationDelegate.checkBinding(MapOperatorGenerationDelegate.java:485)
    at oracle.wh.service.impl.mapping.generation.MapOperatorGenerationDelegate.validate(MapOperatorGenerationDelegate.java:420)
    at oracle.wh.service.impl.mapping.generation.MapOperatorGenerationDelegate.prepareOutputContext(MapOperatorGenerationDelegate.java:231)
    at oracle.wh.service.impl.mapping.component.keylookup.KeyLookupSqlDelegate.prepareOutputContext(KeyLookupSqlDelegate.java:57)
    at oracle.wh.service.impl.mapping.generation.WBMappingGenerator.generate(WBMappingGenerator.java:239)
    at oracle.wh.service.impl.mapping.generation.PlSqlGenerationMediator.assembleSetBasedInternal(PlSqlGenerationMediator.java:2098)
    at oracle.wh.service.impl.mapping.generation.PlSqlGenerationMediator.assembleSetBased(PlSqlGenerationMediator.java:2080)
    at oracle.wh.service.impl.mapping.generation.PlSqlGenerationMediator.assemble(PlSqlGenerationMediator.java:532)
    at oracle.wh.service.impl.mapping.generation.WBMappingGenerator.generate(WBMappingGenerator.java:770)
    at oracle.wh.service.impl.mapping.generation.WBMappingGenerator.generate(WBMappingGenerator.java:316)
    at oracle.wh.service.impl.mapping.generation.WBDeployableMappingGenerator.generate(WBDeployableMappingGenerator.java:99)
    at oracle.wh.service.impl.generation.common.WBGenerationService.generateCode(WBGenerationService.java:433)
    at oracle.wh.service.impl.generation.common.WBGenerationService.generateCode(WBGenerationService.java:311)
    at oracle.wh.service.impl.generation.service.WhValidationGenerationTransaction.run(WhValidationGenerationTransaction.java:241)
    ok, this is the first part. I couldn´t solve it, so I've changed the mapping and when i add the cube to the mapping i get the next error:
         at oracle.wh.repos.impl.mapping.CMPMapOperatorOwnerImpl.createOperator(CMPMapOperatorOwnerImpl.java:87)     at oracle.wh.repos.impl.mapping.CMPBaseMap.createOperator(CMPBaseMap.java:387)     at oracle.wh.ui.tsmapping.MappingTransferHandler.handleCreateOperator(MappingTransferHandler.java:132)     at oracle.wh.ui.tsmapping.MappingTransferHandler.importData(MappingTransferHandler.java:64)     at oracle.wh.ui.editor.dnd.EditorTransferHandler$EditorDropHandler.drop(EditorTransferHandler.java:232)     at javax.swing.TransferHandler$SwingDropTarget.drop(TransferHandler.java:598)     at sun.awt.dnd.SunDropTargetContextPeer.processDropMessage(SunDropTargetContextPeer.java:542)     at sun.awt.dnd.SunDropTargetContextPeer.access$800(SunDropTargetContextPeer.java:52)     at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchDropEvent(SunDropTargetContextPeer.java:805)     at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchEvent(SunDropTargetContextPeer.java:743)     at sun.awt.dnd.SunDropTargetEvent.dispatch(SunDropTargetEvent.java:29)     at java.awt.Component.dispatchEventImpl(Component.java:3494)     at java.awt.Container.dispatchEventImpl(Container.java:1627)     at java.awt.Component.dispatchEvent(Component.java:3477)     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)     at java.awt.LightweightDispatcher.processDropTargetEvent(Container.java:3269)     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3123)     at java.awt.Container.dispatchEventImpl(Container.java:1613)     at java.awt.Window.dispatchEventImpl(Window.java:1606)     at java.awt.Component.dispatchEvent(Component.java:3477)     at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)Caused by: java.lang.NullPointerException     at oracle.wh.service.impl.mapping.component.dimension.DimensionInboundAdapter.constructLevelGroup(DimensionInboundAdapter.java:542)     at oracle.wh.service.impl.mapping.component.dimension.CubeInboundAdapter.convertOperator(CubeInboundAdapter.java:562)     at oracle.wh.repos.sdk.mapping.mxs.OperatorInboundAdapter.convert(OperatorInboundAdapter.java:28)     at oracle.wh.repos.pdl.mxs.ReconcileService.createTarget(ReconcileService.java:572)     at oracle.wh.repos.pdl.mxs.ReconcileService.createTarget(ReconcileService.java:544)     at oracle.wh.repos.pdl.mxs.ReconcileService.reconcile(ReconcileService.java:304)     at oracle.wh.repos.impl.mapping.CMPMapOperatorOwnerImpl.createOperator(CMPMapOperatorOwnerImpl.java:67)     ... 25 more
    If i use one cube from the same location i get the error number two. But if i use a dimension from this location or any object from other location it works fine.
    Does anyone know what's happening?
    Thanks in advance

    Hi!
    I found the solution to this problem. It was one dimension. This dimension had lost the relationship between the fields in the dimension and the fields in the relational table... I don't know why nor how!!
    Thanks anyway

  • "VLD-2780: Unable to generate Merge statement".

    Folks,
    I am trying to validate my mapping before deployment but I am getting the following error: "VLD-2780: Unable to generate Merge statement".
    - I am mapping 5 tables from my source to one table in my target by using a joiner.The primary key in my target table is also my synthetic key. (I have created a sequence on the primary key)
    -When the "Match by constraint" in the operator properties of the target table is set to "All constraints" I get the VLD-2780 error message during validation.
    - However when the "Match by constraint" is set to "No constraints" I can generate the merge statement in my intermediate result but my validation is now giving me this message:"VLD-2750: Missing update matching criteria in TARGET_TABLE".
    - My synthetic key property is set as follow:
    Load Column when Inserting Row = Yes
    Load Column when Updating Row = No
    Match Column when Updating Row = No
    Update:Operation =
    Match Column when Deleting Row = Yes
    I have tried other options wihout much success. I can't seem to pass the validation step.
    Any help will be greatly appreciated.
    Thanks Much!

    There are two ways of matching incomming rows with rows present in a target table during updates. One is to use the key constraints. You can see this by inspecting the target object properties in the mapping and checking the 'Match by constraint' parameter. This is recommended in case you have defined key constraints on the target objects.
    The other (if match by constraints is set to 'no constraints') is to set the Match Column when Updating to yes (and conversely, Load Column when Updating to 'No') for individual columns that have to be matched (as sugested above).
    If you get the VLD-2750 message, it means that one of the target objects does not have any matching criteria set for updates. In an insert/update mapping you should use either the first or the second matching method for all your target objects.
    Regards:
    Igor

  • Never met problem with connector

    Hi,
    I have the source and target on the same oracle instance but in different schema.
    Owb automatically creates the connector but when I try to validate it, I found this warning:
    VLD-3064: Owning and referenced locations of this connector are on the same database instance. Unless explicitly referenced in configuration settings, no generated code will use the database link resulting from deployment of this connector.
    What should I change to make it work?
    Please help me!
    Vieruzzo.

    Hi AP,
    thanks for help me.
    I have registered the location but when I try to deploy the mapping I found these warning:
    TIPO_MISURATORE_MAP Create Warning
    ORA-06550: line 26, column 3:
    PL/SQL: SQL Statement ignored
    TIPO_MISURATORE_MAP Create Warning
    ORA-06550: line 37, column 8:
    PL/SQL: ORA-00942: tabella o vista inesistente
    I don't understand why it don't found the table that are in a different schema but in the same database instance.

  • Dimension with 2 roles and 2 hierarchies used in 2 cubes

    Hi,
    I have a dimension in which there are two dimension roles (roleA, roleB) defined as well as two hierarchies (hierarchyA, hierarchyB). Currently hierarchyA is set as default. (Not because that is in fact the default one, only because OWB forces one to choose a default)
    I need to define two cubes (cubeA, cubeB). CubeA will use the dimension with roleA and cubeB will use the dimension with roleB.
    Is it possible to tell cubeA to use/see/make available only hierarchyA and cubeB only hierarchyB? HierarchyA makes no sense in cubeB so I want to "specify" hierarchyB for cubeB.
    Thanks,
    Juanita

    A different issue but possibly related:
    I have a ROLAP cube with one of the dimensions containing multiple hierarchies. If I deploy this with deployment option set to "Deploy data only", it works 100%. As soon as I change the deployment option to "Deploy All", I get a VLD-0398 error.
    I need to choose "Deploy all" since the cube metadata must be deployed to the OLAP catalog in order for Disco OLAP and BI Spreadsheet Add-In to see the cube.
    First question:
    Is it possible to deploy to the OLAP catalog if the cube has a dimension with multiple hierarchies?
    Second question:
    If it is not possible, what is the workaround?
    Thanks,
    Juanita

  • Is it possible to have source and target schema in the same DB instance ?

    Hi All,
    I'm using Oracle 11gR1.
    I have switched source locations from other server to the one with OWB.
    During deploy I get VLD-3064 and I can't deploy mapping because of many 'table or view does not exist' warnings.
    Is it possible to have source and target schemas in the same instance ??
    How to do it ?
    Regards,
    Martin

    Hi Jörg,
    Thanks for your help and quick answer.
    I'd like to clarify a little your answer :
    1. Are the any special privilages I need to set ? Currently I have only 'RESOURCE' and 'CONNECT' (I think I didn't have to add any other privs when that schema was located on other instance...)
    2. Also VLD-3064 states that : 'Owning and referenced location of this connector are on the same database instance. Unless explicitly referenced in configuration settings no generated code will use the dataabase link resulting from deployment of this connector'. Does it mean I have to put something in configuration ?
    Thanks,
    Martin

  • Invalid Location for operator while batch mapping

    Hi,
    I am using 10.2g version of OWB and while deploying the batch mapping, I am getting errors like:
    "VLD-1134: Invalid location for operator DATE_REF_SEQ_0.
    Configured location for operator does not exist or is not a valid location under the referenced module."
    The "DATE_REF" is one of the tables in the database. Similarly, I am getting error for many of these operators while i try to deploy the batch mapping. Could you please help us on how can we change the location of these operators in the design center/control center?
    Thanks,
    Vipul

    Hi ,
    VLD-1134 error comes when the location in configuration properties is not set or pointing to a different location.
    This generally happens when you migrate OWB code from 1 server to another or from 1 version to another.
    Goto your OWB 10.2 Designer .
    Towards right side you will find Connection Explorer
    Create new location pointing to your database ( If location is already available then note down the name )
    Now on your Source module set the metadata location and data location . You can do this by double clicking onto the module name .
    Do the same for your Target module .
    You need to set the location for Streams Administrator and Location from module Configuration .
    Thanks,
    Sutirtha

  • Update/Insert key matching

    I've got a table in OWB that has a surrogate key as the unique key and the natural key (matching the source data) as part of the orginal key and a lookup value that's part of a dimension in OWB.
    I'm trying to figure out how to get OWB to match data to do an update/insert on the incoming data, but I keep getting VLD-2780 errors (saying that it can't update the surrogate key because it comes from a sequence). Duh..
    The short of it is this:
    Source_Table (key_part1, key_part2, key_part3)
    Dest_table (surrogate_key, key_part1, dimension_key)
    The dimension key is obtained from a key_lookup using key_part2 and key_part3 to return a single dimension key.
    I have a PK on the surrogate key and a unique key on key_part1, dimension_key in the DEST table. The source_table has a PK across all three columns.
    What's the proper way to tell OWB how to match data between teh two tables for an update/insert?
    Thanks!

    Hi!
    Make sure to have the following properties set correcty in the mapping editor:
    For the target table: "match by constraint" : choose the key yo want to use or "No constraints" if you do not wish to use any key.
    For each attribute of the target table:
    Loading properties:
    Load column when updating: no for your matching fields, yes otherwise
    Match column when updating: yes for your matching fields, no otherwise
    Load column when inserting: yes
    Load column when updating must be no for the primary key!
    Regards,
    Carsten.

Maybe you are looking for