VM manager cannot add pre configured server - Says server has been managed

Hey,
I had 2 server with 2 virtual systems installed and running on it.
My manager had some issues and had a bad hard disk and a network card.
So I freshly installed the manager on a new box.
Now when i try to add those 2 servers in the pool - I get this message
" Server has been managed."
....Any idea on this..???
I don't have older manager ,where i can go and delete the entry of the server.

If for some reason that the server is not cleaned up properly, you may see the error message:
"Error: - 'hostname' has been managed." (from Oracle VM Manager)"
You can manually reset the Oracle VM Server agent. First, shutdown the VMs on the server and make sure no VMs running on the server:
# xm list
# xm shutdown domain-id
Then, stop Oracle VM Server agent:
# service ovs-agent stop
Clean up the Oracle VM server agent state files from /etc/ovs-agent/db location :
# rm -rf /etc/ovs-agent/db/*
And restart Oracle VM Server agent
# service ovs-agent start
One the Oracle VM Server agent is up and running, you can register the server with the Oracle VM Manager.

Similar Messages

I cannot download a song it says it has been corrupted and must go to store check for downloads and I do that and it says the same thing. will not download I paid for it and can't download

I purchased a song but when downloading it says it is corrupted. So I go to store and check for downloads and it does the same thing

I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not downloading properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

Cannot setup attglobal account keeps saying server timed out

cannot setup attglobal account keeps saying server timed out?

I had the same, frustrating problem, then happened onto a process that worked for me. I wrote it up in the following post: https://discussions.apple.com/thread/3541003
Hope that works for you, too.

The adobe application manager cannot install updates since it says that another installer is running

The adobe application manager cannot install updates since it says that another installer is running?? Another installer is not running, any way to fix this?

We can't know. You are not providing any system information or other details. Restart your system, make sure to sign in as admin, then try again.
Mylenium

My macbook pro with OS 10.6.7 'mail' program does not send my mail through the IPS wireless, I am connected to. The message is my 'e-mail is rejected by the server'. It has been working until 5 days ago. The connection doctor says I am connected and no lo

My macbook pro with OS 10.6.7 'mail' program does not send my mail through the IPS wireless, I am connected to. The message is my 'e-mail is rejected by the server'. It has been working until 5 days ago. The connection doctor says I am connected and no log in required.
After trying lots I found now in 'Airport Utility is 'unable to detect any airport wireless devises.....'
There is no provider to be seen in airport utility and only 'rescan' is an option with no results...
even so I am connected and can browse the net receive mail etc. and the outgoing 'mail server' is set to the internet provider I am connected to.
Can you enlighten me what can I do I need to use my e-mail program urgently !!!
Thanks for your help

I'm not sure what "IPS wireless" is, but unless you have an Apple Wi-Fi base station (such as a Time Capsule, AirPort Extreme, or AirPort Express), AirPort Utility won't see anything.
You might try defining a new SMTP server to see if that will work any better.
By the way, the subject field for these messages isn't intended to hold a lot of text. Put a short description of your problem in the subject field and save the rest of your message for the body field.

My biggest 'pain' at the moment is that every time I go to change then save a Photoshop CS3 file it says 'cannot save as the file as it has been left open or is in use by another application'

My biggest 'pain' at the moment is that every time I go to change then save a Photoshop CS3 file it says 'cannot save as the file as it has been left open or is in use by another application'

Rule Number One - NEVER go directly uinto the iPhoto library - there are no user servicable parts in it and making any change no matter how small can corrupt your library and cause data or photo loss
Exactly how were you trying to save a copy of your iPhoto library?
Albumdata.xml does not contain your photos - and again NEVER make any changes to the content of the iPhoto library - no dragging - no changes - never go into the library
We need to know exactly what you did
And probalby the easiest solution is to load your backup from before you messed things up
For reference after you get things working
Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN

Msg 8631 Internal error: Server stack limit has been reached on SQL Server 2012 from T-SQL script that runs on SQL Server 2008 R2

I have an Script mostly that is generated by SSMS which works with-out issue on SQL Server 2008, but when I attempt to run it on a new fresh install of SQL Server 2012 I get an Msg 8631. Internal error: Server stack limit has been reached. Please look for
potentially deep nesting in your query, and try to simplify it.
The script itself doesn't seem to be all that deep or nested. The script is large 2600 lines and when I remove the bulk of the 2600 lines, it does run on SQL Server 2012. I'm just really baffled why something that SQL Server generated with very
few additions/changes AND that WORKS without issue in SQL Server 2008 R2 would suddenly be invalid in SQL Server 2012
I need to know why my script which is working great on our current SQL Server 2008 R2 servers suddenly fails and won't run on an new SQL Server 2012 server. This script is used to create 'bulk' Replications on a large number of DBs saving a tremendous
amount of our time doing it the manual way.
Below is an 'condensed' version of the script which fails. I have removed around 2550 lines of specific sp_addarticle statements which are mostly just copy and pasted from what SQL Management Studio 'scripted' for me went I when through the Replication
Wizard and told it to save to script.
declare @dbname varchar(MAX), @SQL nvarchar(MAX)
declare c_dblist cursor for
select name from sys.databases WHERE name like 'dbone[_]%' order by name;
open c_dblist
fetch next from c_dblist into @dbname
while @@fetch_status = 0
begin
print @dbname
SET @SQL = 'DECLARE @dbname NVARCHAR(MAX); SET @dbname = ''' + @dbname + ''';
use ['+@dbname+']
exec sp_replicationdboption @dbname = N'''+@dbname+''', @optname = N''publish'', @value = N''true''
use ['+@dbname+']
exec ['+@dbname+'].sys.sp_addlogreader_agent @job_login = N''DOMAIN\DBServiceAccount'', @job_password = N''secret'', @publisher_security_mode = 1, @job_name = null
-- Adding the transactional publication
use ['+@dbname+']
exec sp_addpublication @publication = N'''+@dbname+' Replication'', @description = N''Transactional publication of database
'''''+@dbname+''''' from Publisher ''''MSSQLSRV\INSTANCE''''.'', @sync_method = N''concurrent'', @retention = 0, @allow_push = N''true'', @allow_pull = N''true'', @allow_anonymous = N''false'', @enabled_for_internet
= N''false'', @snapshot_in_defaultfolder = N''true'', @compress_snapshot = N''false'', @ftp_port = 21, @allow_subscription_copy = N''false'', @add_to_active_directory = N''false'', @repl_freq = N''continuous'', @status = N''active'', @independent_agent = N''true'',
@immediate_sync = N''true'', @allow_sync_tran = N''false'', @allow_queued_tran = N''false'', @allow_dts = N''false'', @replicate_ddl = 1, @allow_initialize_from_backup = N''true'', @enabled_for_p2p = N''false'', @enabled_for_het_sub = N''false''
exec sp_addpublication_snapshot @publication = N'''+@dbname+' Replication'', @frequency_type = 1, @frequency_interval = 1, @frequency_relative_interval = 1, @frequency_recurrence_factor = 0, @frequency_subday = 8,
@frequency_subday_interval = 1, @active_start_time_of_day = 0, @active_end_time_of_day = 235959, @active_start_date = 0, @active_end_date = 0, @job_login = N''DOMAIN\DBServiceAccount'', @job_password = N''secret'', @publisher_security_mode = 1
-- There are around 2400 lines roughly the same as this only difference is the tablename repeated below this one
use ['+@dbname+']
exec sp_addarticle @publication = N'''+@dbname+' Replication'', @article = N''TABLE_ONE'', @source_owner = N''dbo'', @source_object = N''TABLE_ONE'', @type = N''logbased'', @description = null, @creation_script =
null, @pre_creation_cmd = N''drop'', @schema_option = 0x000000000803509F, @identityrangemanagementoption = N''manual'', @destination_table = N''TABLE_ONE'', @destination_owner = N''dbo'', @vertical_partition = N''false'', @ins_cmd = N''CALL sp_MSins_dboTABLE_ONE'',
@del_cmd = N''CALL sp_MSdel_dboTABLE_ONE'', @upd_cmd = N''SCALL sp_MSupd_dboTABLE_ONE''
EXEC sp_executesql @SQL
SET @dbname = REPLACE(@dbname, 'dbone_', 'dbtwo_');
print @dbname
SET @SQL = 'DECLARE @dbname NVARCHAR(MAX); SET @dbname = ''' + @dbname + ''';
use ['+@dbname+']
exec sp_replicationdboption @dbname = N'''+@dbname+''', @optname = N''publish'', @value = N''true''
use ['+@dbname+']
exec ['+@dbname+'].sys.sp_addlogreader_agent @job_login = N''DOMAIN\DBServiceAccount'', @job_password = N''secret'', @publisher_security_mode = 1, @job_name = null
-- Adding the transactional publication
use ['+@dbname+']
exec sp_addpublication @publication = N'''+@dbname+' Replication'', @description = N''Transactional publication of database
'''''+@dbname+''''' from Publisher ''''MSSQLSRV\INSTANCE''''.'', @sync_method = N''concurrent'', @retention = 0, @allow_push = N''true'', @allow_pull = N''true'', @allow_anonymous = N''false'', @enabled_for_internet
= N''false'', @snapshot_in_defaultfolder = N''true'', @compress_snapshot = N''false'', @ftp_port = 21, @allow_subscription_copy = N''false'', @add_to_active_directory = N''false'', @repl_freq = N''continuous'', @status = N''active'', @independent_agent = N''true'',
@immediate_sync = N''true'', @allow_sync_tran = N''false'', @allow_queued_tran = N''false'', @allow_dts = N''false'', @replicate_ddl = 1, @allow_initialize_from_backup = N''true'', @enabled_for_p2p = N''false'', @enabled_for_het_sub = N''false''
exec sp_addpublication_snapshot @publication = N'''+@dbname+' Replication'', @frequency_type = 1, @frequency_interval = 1, @frequency_relative_interval = 1, @frequency_recurrence_factor = 0, @frequency_subday = 8,
@frequency_subday_interval = 1, @active_start_time_of_day = 0, @active_end_time_of_day = 235959, @active_start_date = 0, @active_end_date = 0, @job_login = N''DOMAIN\DBServiceAccount'', @job_password = N''secret'', @publisher_security_mode = 1
-- There are around 140 lines roughly the same as this only difference is the tablename repeated below this one
use ['+@dbname+']
exec sp_addarticle @publication = N'''+@dbname+' Replication'', @article = N''DB_TWO_TABLE_ONE'', @source_owner = N''dbo'', @source_object = N''DB_TWO_TABLE_ONE'', @type = N''logbased'', @description = null, @creation_script
= null, @pre_creation_cmd = N''drop'', @schema_option = 0x000000000803509D, @identityrangemanagementoption = N''manual'', @destination_table = N''DB_TWO_TABLE_ONE'', @destination_owner = N''dbo'', @vertical_partition = N''false''
EXEC sp_executesql @SQL
fetch next from c_dblist into @dbname
end
close c_dblist
deallocate c_dblist
George P Botuwell, Programmer

Hi George,
Thank you for your question.
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
If you have any feedback on our support, please click
here.
Allen Li
TechNet Community Support

Cannot create a session after the response has been committed (Tomcat 6)

I'm getting a rather annoying error when I try to open a pretty basic JSP page.
I'm rather new to the whole JSP scene, so I'm following the example found on pages 287 and onwards in "JSF in Action - Manning" in case anyone wanted to check my code against the source.
I've searched for about 4 hours now, coming back to this site a couple of times, once reading about writeouts and stuff. But I'm not really sure this is the issue in this case and if it is, where exactly the problem lies.
I've already fixed a number of errors I got (jtsl.jar and standard.jar missing etc...) but this particular problem is driving me (and my co-workers for that matter :-) ) up the wall.
Anyone willing to help me out here?
Error:
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Cannot create a session after the response has been committed
     javax.faces.webapp.FacesServlet.service(FacesServlet.java:152)
root cause
java.lang.IllegalStateException: Cannot create a session after the response has been committed
     org.apache.catalina.connector.Request.doGetSession(Request.java:2301)
     org.apache.catalina.connector.Request.getSession(Request.java:2075)
     org.apache.catalina.connector.RequestFacade.getSession(RequestFacade.java:833)
     org.apache.myfaces.context.servlet.SessionMap.setAttribute(SessionMap.java:53)
     org.apache.myfaces.util.AbstractAttributeMap.put(AbstractAttributeMap.java:103)
     org.apache.myfaces.util.AbstractAttributeMap.put(AbstractAttributeMap.java:35)
     org.apache.myfaces.application.jsp.JspStateManagerImpl.saveSerializedViewInServletSession(JspStateManagerImpl.java:523)
     org.apache.myfaces.application.jsp.JspStateManagerImpl.saveSerializedView(JspStateManagerImpl.java:358)
     javax.faces.application.StateManager.saveView(StateManager.java:47)
     org.apache.myfaces.application.jsp.JspViewHandlerImpl$StateMarkerAwareWriter.flushToWriter(JspViewHandlerImpl.java:387)
     org.apache.myfaces.application.jsp.JspViewHandlerImpl.renderView(JspViewHandlerImpl.java:322)
     org.apache.myfaces.lifecycle.RenderResponseExecutor.execute(RenderResponseExecutor.java:41)
     org.apache.myfaces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:132)
     javax.faces.webapp.FacesServlet.service(FacesServlet.java:138)
Source Code of login.jsp:
<%@ page language="java" contentType="text/html; charset=ISO-8859-1"
    pageEncoding="ISO-8859-1"%>
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
<f:view>
<html>
<head>
     <title>
          <h:outputText value="ProjectTrack"/>
     </title>
</head>
     <body>
          <table>
               <tr>
                    <td>
                         <h:graphicImage url="/images/logo Skillteam.jpg"
                         alt="Welcome to ProjectTrack"
                         title="Welcome to ProjectTrack"
                         width="435" height="120"/>
                    </td>
               <td>
                    <font face="Arial, sans-serif"
                    size="6">
                    <h:outputText value="ProjectTrack"/>
                    </font>
               </td>
               </tr>
     http://forum.java.sun.com/post!default.jspa?forumID=45#
Click for bold     </table>
     </body>
</html>
</f:view>
web.xml & faces-config
<?xml version="1.0" encoding="UTF-8"?>
<web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
     xmlns="http://java.sun.com/xml/ns/javaee"
     xmlns:web="http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"
     xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" id="WebApp_ID" version="2.5">
     <display-name>ProjectTrack</display-name>
     <welcome-file-list>
     <welcome-file>faces/login.jsp</welcome-file>
     <welcome-file>index.html</welcome-file>
     </welcome-file-list>
     <servlet>
     <servlet-name>Faces Servlet</servlet-name>
     <servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
     <load-on-startup>1</load-on-startup>
     </servlet>
     <servlet-mapping>
     <servlet-name>Faces Servlet</servlet-name>
     <url-pattern>/faces/*</url-pattern>
     </servlet-mapping>
</web-app>
<?xml version="1.0"?>
<!DOCTYPE faces-config PUBLIC
"-//Sun Microsystems, Inc.//DTD JavaServer Faces Config 1.0//EN"
"http://java.sun.com/dtd/web-facesconfig_1_0.dtd">
<faces-config>
     <navigation-rule>
          <from-view-id>/login.jsp</from-view-id>
          <navigation-case>
               <from-outcome>success</from-outcome>
               <to-view-id>/inbox.jsp</to-view-id>
          </navigation-case>
          <navigation-case>
               <from-outcome>failure</from-outcome>
               <to-view-id>/login.jsp</to-view-id>
          </navigation-case>
     </navigation-rule>
</faces-config>Setup:
Eclipse Europe 3.3.0
Tomcat 6.0.13
MyFaces 1.2
JRE 1.6.0_02

When searching for this error, this was the first page google gave me. I found the answer and just in case anyone else stumbles in here with the same question I thought I'd share my findings.
Unfortunately, if your problem is the same as mine, you're going to feel pretty silly. I was navigating to the wrong page. If MyFaces(when running tomcat) tries to resolve to a page that doesn't exist, the error given above is what happens.
In my case I accidentally put my .jsp page into the wrong directory and ended up banging my head against the wall for an hour figuring that out. Hope this helps someone.

SQL2012: Internal Error: The operation terminated unsuccessfully. The connection timeout was exceeded. Server: The operation has been cancelled

When rendering a SSRS native mode report based on a query to SSAS the report with fail with the following error:
An error has occurred during report processing. (rsProcessingAborted) Cannot read the next data row for the dataset. (rsErrorReadingNextDataRow). The connection either timed out or was lost. Unable to read data from the transport connection:
An existing connection was forcibly closed by the remote host.
Putting a trace on the SSAS instance, I get an error:
Internal error: The operation terminated unsuccessfully. The connection timeout was exceeded. Server: The operation has been cancelled.
I've modified the IIS (6) application pool timeouts, the SSRS rsreportserver.config timeouts, and the SSAS timeouts. Restarted services, rebooted, and still I get this error.
The report will render if I select a shorter time period (less data, shorter query time).
Running SQL2012 (11.0.5058.0), SSAS and SSRS on separate servers, same subnet.
Any help or suggested troubleshooting greatly appreciated.

Please check the links below.
http://www.symantec.com/business/support/index?page=content&id=TECH186577
https://support.microsoft.com/kb/2200755?wa=wsignin1.0
http://msdn.microsoft.com/en-IN/library/ms155782.aspx
http://blogs.msdn.com/b/dynamicsaxbi/archive/2013/02/14/how-to-addressing-ssrs-session-timeouts.aspx

Upload Failed. The server storage quota has been exceeded

Dear All,
I have an Excel file on Document library which is more than 100Mb. I am working with it daily (Simple edit, update and save). Since yesterday I am getting error message "Upload Failed. The server storage quota has been exceeded. Save a copy". But
i have 10GB quota (I have checked in CA). Other users are fine. I am only the person who get this message. any idea?
Best Regards
lasantha

Were are you storing this file?in Mysite Document library or in general site document library? Considering other users are not facing problems i guess personal quota on mysite is exceeded
Go
to your Central Administration à Application
On the Application Management page, in the SharePoint
Site Management section, click Quota Templates.
On the Quota Template page, you can see the Personal
site’s Limit site storage is set to 100Mb by default
Make it 200mb

The maximum report processing jobs limit configured by your system has been reached.

Hi,
We are using Crystal report in ASP.NET (Microsoft .NET 3.5) environment for a number of years but everything went quite well.
But recently, we have migrated to .NET 4.5 ,and started having this error.
"The maximum report processing jobs limit configured by your system has been reached."
As per internet search, some recommended to use the Object.dispose() approach. We have applied recently ,and it is still NOT working
Our JobLimit in the registry on production server is 75.
This is report display
This is report dispose
Seeks your technical expertise here thanks in advance.

See if this Article will help:
Crystal Reports Maximum Report Processing Jobs Limit
BTW.; do not set the JobLimit key in the registry to -1 (that is for CRS OEM edition only).
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

In the icloud settings, i am told i need to accept the terms and conditions to use icloud, but when i try to do so, i get a message "unable to connect to server". This has been going on for a week. There is no problem with either my wifi or cellular conne

In the icloud settings, I am told I need to accept the terms and conditions to use icloud. However, when I click on "Terms and conditions", I get a message "unable to connect to server". This has been happening for a week now since I upgraded to iOS 7.06. There is no problem with my wifi or cellular connectivity, all other applications work perfectly. P.S.I have never used icloud before, but wish to do so now. How do I overcome this problem?

Have you turned the iPad off then back on? That often helps with problems.

The instagram icon on my iTunes says it has been downloaded but I can't seem to find it. Where do I find it?

The instagram icon on my iTunes says it has been downloaded but I can't seem to find it. Where do I find it?

Hi Charlene1018,
You can locate any of your iTunes media including apps in Finder by following this article:
Where are my iTunes files located?
http://support.apple.com/kb/ht1391
Locating the file for an item you see in iTunes
If you're not sure where some of the content you see in iTunes is stored, iTunes will also show you what it knows about your media in the Get Info window.
Select an item in iTunes and choose File > Get Info.
You can right-click on the 'Where' to get the option to Show in Finder (Mac OS X) or Show in Windows Explorer (Windows).
Cheers!
- Ari

My itunes won't open as it says it has been installed incorrectly. It can't find MSVCR80.dll. Help!

My itunes won't open as it says it has been installed incorrectly. It can't find MSVCR80.dll. Help!
I tunes was not installed correctly . Please reinstall. Error 7 (Windows error 126)
i have tried uninstalling itunes and reinstalling but itunes won't work at all!
AARRGH

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Trying to update the software for my iphone and it keeps saying download has been corrupted. an same for imac update. help?

trying to update the software for my iphone and it keeps saying download has been corrupted. an same for imac update. help?

Hi NWL1,
Thanks for the question. If I understand correctly, the iPhone won't update and is stuck. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario

VM manager cannot add pre configured server - Says server has been managed

Similar Messages

Maybe you are looking for