Vmware Data recovery Best pratices

Hi,
I am looking for Vmware Data recovery Best pratices, I find everywhere on the internet the following link :  http://viops.vmware.com/home/docs/DOC-1551
But this is not a valid link and I can't find it anywhere...
Thanks

Hi,
I am looking for Vmware Data recovery Best pratices, I find everywhere on the internet the following link :  http://viops.vmware.com/home/docs/DOC-1551
But this is not a valid link and I can't find it anywhere...
Thanks

Similar Messages

  • Help!  (Data Recovery best practices question)

    Recently my fiancé's Macbook (first White model that used an Intel chipset) running 10.6.2 began to behave strange (slow response time, hanging while applications launch, etc). I decided to take an old external USB HD I had lying around and format it on my MBP in order to time machine her photo's and itunes library. Time machine would not complete a backup and I could not get any of the folders to copy through finder(various file corrupt errors). I assumed it could be a permission issue so I inadvertantly fired up my 10.5 disk and did a permission repair. Afterwards the disk was even more flaky (which I believe was self inflicted when I repaired with 10.5).
    I've since created a 10.6.2 bootable flash key and went out and bought Disk Warrior (4.2). I ran a directory repair and several disk util repairs but was still unable to get the machine to behave properly (and unable to get time machine to complete). Attempting to run permission repairs while booted to USB or the Snow Leopard install disk resulted in it hanging at the '1 minute remaining' for well over an hour. My next step was to re-install Snow Leopard but the install keeps failing after the progress bar completes.
    As it stands now the volume on the internal HD is not bootable and I'm running off my usb key boot drive using 'CP -R *' in terminal to copy her user folder onto the external USB hard drive. It seems to be working, but it's painfully slow (somewhere along the lines of maybe 10 meg per half an hour with 30gb to copy) I'm guessing this speed has to do with my boot volume running off a flash drive.
    I'm thinking of running out and grabbing a firewire cable and doing a target boot from my MBP hoping that that would be a lot faster than what I'm experiencing now. My question is, would that be the wisest way to go? My plan of action was to grab her pictures and music then erase and reformat the drive. Is it possible that I could try something else with Disk Warrior? I've heard a lot of good things about it but I fear that I did a number on it when I accidently ran 10.5 permission repair on the volume.
    Any additional help would be appreciated as she has years of pictures on there that I'd hate to see her loose.

    That sounds like a sensible solution, although you need not replace the original drive. Install OS X on the external drive, boot from it and copy her data. Then erase her drive and use Disk Utility's Restore option to clone the external drive to the internal drive. If that works then she should continue using the external drive as a backup so the next time this happens she can restore from the backup.
    For next time: Repairing permissions is not a troubleshooting tool. It's rarely of any use and it does not repair permissions in a Home folder. If a system is becoming unresponsive or just slower then there's other things you should do. See the following:
    Kappy's Personal Suggestions for OS X Maintenance
    For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.5.1 or higher are Intel Mac compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. Versions 1.5.1 or later are Intel Mac compatible.
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts had been significantly reduced in Tiger and Leopard. These utilities have limited or no functionality with Snow Leopard and should not be installed.
    OS X automatically defrags files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
    I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old logfiles and archives, clearing caches, etc. Other utilities are also available such as Onyx, Leopard Cache Cleaner, CockTail, and Xupport, for example.
    For emergency repairs install the freeware utility Applejack (not compatible with Snow Leopard.) If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline. Note that AppleJack 1.5 is required for Leopard. AppleJack is not compatible with Snow Leopard.
    When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
    Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
    1. Retrospect Desktop (Commercial - not yet universal binary)
    2. Synchronize! Pro X (Commercial)
    3. Synk (Backup, Standard, or Pro)
    4. Deja Vu (Shareware)
    5. Carbon Copy Cloner (Donationware)
    6. SuperDuper! (Commercial)
    7. Intego Personal Backup (Commercial)
    8. Data Backup (Commercial)
    9. SilverKeeper 2.0 (Freeware)
    10. MimMac (Commercial)
    11. Tri-Backup (Commercial)
    Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
    Additional suggestions will be found in Mac Maintenance Quick Assist.
    Referenced software can be found at www.versiontracker.com and www.macupdate.com.

  • Help!  Best data recovery software?

    Help!
    Accidentally put some important photos in the Trash Can, and emptied it.
    Best data recovery program = ?
    Thanks!

    Click here and pick a product. Don't write anything else to the drive until the files are recovered or you choose not to recover them.
    (105730)

  • External drive won't mount- which software is best for data recovery?

    Hi,
    My external OWC drive won't mount to the desktop. It is visible in Disc Utility, but can't be manually mounted from there. Verify and Repair disk functions state that the disk appears ok (log below):
    Verify and Repair volume “OWC Mercury Elite AL Pro mini”
    Checking Journaled HFS Plus volume.
    Checking Extents Overflow file.
    Checking Catalog file.
    Checking multi-linked files.
    Checking Catalog hierarchy.
    Checking Extended Attributes file.
    Checking volume bitmap.
    Checking volume information.
    The volume OWC Mercury Elite AL Pro mini appears to be OK.
    Drive lights up and spins. No weird sounds, just won't mount.
    Not everything on the disc was backed up before the problem occurred. It's still under warranty with OWC, but I'd like to attempt to recover the data before sending it in for repair/replacement. The OWC tech on the phone said he's never seen this specific problem with this drive.
    I'm thinking Data Rescue 3 would be the best software to try, but does anyone know of any other options to try first?
    Thanks!

    JohnDoe2009
    I concur with the previous poster that if Disk Utility found no problems running TechTool Pro, Drive Genius or Disk Warrior might get it going. If you don't have any of those you could try
    • Download and install Applejack
    • Restart computer holding down Command + S
    • When Command line comes up type in
    +applejack AUTO+
    Let is run all five functions.
    In terms of Data Recovery
    DataRescue 3
    Virtual Lab
    FileSalvage
    are all excellent tools, and all offer a demo version.
    Dr. Smoke's FAQ Data Recovery offers excellent tips on how to do it.
    Good luck.
    cornelius

  • The Best Data Recovery Software for Mac OS X 10.5.8 Leopard?

    What is the best data recovery software for Mac OS X 10.5.8 Leopard?

    A backup.
    After that's there's the usual list, DataRescue, FileSalvage. General reading on this topic - http://www.thexlab.com/faqs/datarecovery.html  It would help to know the actual problem since sometimes a straight answer to this kind of question isn't always the way to a solution to the real issue.

  • Best data recovery software for Mac Os X 10.10

    I need to recover data that was deleted on a WD external HDD. I am using a mac mini with Os X 10.10.
    I would like to use a reliable and safe data recovery product.
    Any suggestions?

    The file was fragmented. To fully recover a file it needs to be continuous on the hard drive. If the file was fragmented it was broken into pieces across the hard drive. The recovery program can't know this so would each piece as a different file as it no longer has a map to go off of.
    There will probably be many files with a random letter/number combo for a name. Within these may be the missing parts of the video. While there may be some advanced forensic techniques to reconstitute the files. I think that would go beyond some forum advice to needing years of advanced training in data recovery.
    You can try Nucleus Kernel Macintosh. It is by far the most thorough and robust data recovery I have used but requires Windows to run even though it recovers Mac volumes.
    For OS X native try Stellar Phoenix. I didn't find it as good but it is definitely the best I know of for Os X 10.10.
    I would not bother with Data Rescue or Disk Warrior. They will not do a deep scan of the hard drive. They also won't do a scan if the partition table was lost and won't try to plow through disk errors.
    Also $70 to $100 for data recovery software is very cheap compared to professional.
    Edit: I also hope you are recovering files to a different drive than that external you wiped and that you have not been adding any files to it. Otherwise that data will be mangled fast.

  • Best method/tool for cloning a failing HDD for Data Recovery?

    I have been brooding over this subject "Which method/tool is best for cloning a failing HDD - including the system drive - for data recovery from the clone.Has anyone tried cloning for this specific purpose and achieved any results?I would be interested if they can share their experience or even air their views on the subject.

    I recently review one of the tool, here's my blog/review : http://arnavsharma.net/4/post/2014/05/review-stellar-phoenix-windows-data-recovery.html
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • Disk Warrior didn't work for data recovery. Any suggestions? After recovery, what's the best SSD for 13"MBPro?

    My hard drive decided to quit after only 22 months! Some files were backed up but my current photo albums were not. That's all I really need, I don't care about all the other junk. I've tried booting from the Disk Warrior cd, which Apple Genuis Bar suggested since they don't do data recovery. Fortunately, I got the cd from my brother or I would've paid $99 and it didn't help at all.
    So it there another way I can do this myself or should I just bring it to Fry's for $149?
    Another question would be, after I recover the files, I'd like to upgrade my MacBook Pro 13 to a Solid State drive. I know I need a 2.5" SATA, but which brand/size is good for a $200-$300 budget?
    Thanks for your time.

    Thank you Sig for the information. Unfortunately, I ended up leaving my computer at Frys for Data Recovery.  They have the best guarantee around since they can refund $115 of $149 if they couldn't retrieve any data. This was better than other services of $125/hr whether they could or could not get any data recovered. I didn't want to spend $99 and DataRescue couldn't even run.
    I meant Disk Warrior was recommended by Apple Genius Bar to access my hard drive that crashed. They said it could "fix" it or at least power up so I can then retrieve my data. It couldn't find the hard drive. It just looped for 5-10minutes, which stated that if this was the case, the hard drive could not be "fixed" or accessed..replacement is needed.
    Now I'm in the market for hard drive or solid state hd.

  • Best software for data recovery

    Help please!  I had my iphoto library in my Google Drive folder.  I didn't realize it was there and so I put my Google Drive in the trash and now I don't have my photos.  Does anyone know of any low cost data recovery software?  Thanks!

    General File Recovery
    If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro.  Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.  Two free alternatives are Disk Drill and TestDisk.  Look for them and demos at MacUpdate or CNET Downloads. Recovery software usually provide trial versions that enable you to determine if the software would help before actually paying for it. Beyond this or if the drive has completely failed, then you would need to send the drive to a recovery service which is very expensive.
    The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
    Also visit The XLab FAQs and read the FAQ on Data Recovery.

  • Need best pratices advices

    Hey guys,
    Anyone can share with me the best pratices for the setup of an oracle database. I know that the amount of redo, grouping, file system layout, etc.. depend on the size of your BD. So to help here is the spec of my BD
    oradata : 200GB
    change rate : 50k/s (I got that by dividing the size of my archive redolog by the amount of time between the first and last archlog).
    This is a standard database (not OLTP or Data Warehouse) use to store client information
    My RPO (Recovery Point Objective) is 30 minutes
    Some quick question
    1. How should I layout the file system
    2. How many redo/group/size
    3. How many control file, where shoud I put it
    4. How I should setup the log switching
    Anyway doc, quick, don't want to read a 300 pages oracle document :-) This is why I'm looking on your knowledge
    Thanks
    Edited by: Sabey on 9-Feb-2011 8:01 AM

    Sabey wrote:
    Ok a bit more information.
    Storage : SAN, RAID 5 disk onlySince it's SAN, the RAID 5 (which is generically bad for performance in any update environment) will have minimal adverse effect (because the RAID 5 is hidden by massive cache). Just try to spread the data files across as many disks as possible.
    Oracle works best for datafiles on 'SAME' (Stripe and Mirror Everything). Spread the data files across all possible disks and mix data and index to try to get randomization.
    No ASMPity. A lot of potential transparency will be side-stepped.
    OS: Solaris 10 on a M4000, (2 SPARC 2.1GHz, 4 core each), 16GB RAMFinally some meat. ;-)
    I assume Enterprise Edition, although for the size, the transaction rate proposed, and for the configuration, Standard Edition would likely be sufficient. Assuming you don't need EE-specific features.
    You don't talk about the other things that will be stealing CPU cycles from Oracle, such as the app itself or batch jobs. As a result, it's not easy to suggest an initial guess to memory size. App behaviour will dictate PGA sizing, which can be as important as SGA size - if not more so. For the bland description of app you provide, I'd leave 2GB for OS, subtract whatever else required (app & batch, other stuff running on machine) and split the remaining memory at 50/50 for SGA and PGA until I had stats to change that.
    >
    Like I said, I espect a change rate of 50k/s, is there a rule of thumbs for the size of redo log, the amount, etc.. No bulk load, data is entered by people from a user interface, no machine generated data. Query in read for report but not a lot.Not too much to worry about then. I'd shoot for a minimum of 8 redo logs, mirrored by Oracle s/w to separate disks if at all possible, and size the log files to switch roughly every 15 minutes under typical load. From the looks, that would be (50k/s * 60 sec/min * 15 min) or about 50M - moderately tiny. And set the ARCHIVE_LAG_TARGET to thrum at 15 minutes so you have a predictable switch frequency.
    >
    BTW, what about direct I/O. Should I mount all oracle FS in that mode to prevent the use of OS buffer cache?Again, this would be eliminated by using ASM, but ... here is Tom Kyte's answer confirming direct IO http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:4159251866796
    Your environment is very very small in Oracle terms. Not too much to fuss over. Just make sure you have a decent backup/recovery/failover strategy in place and tested. Use RMAN for the BR and either DataGuard (or DBVisit for Standard Edition)

  • Data Recovery On an iBook G3

    I had an iBook G3 in college (2002, exact model @ http://bit.ly/VGVpSh), and when it died I purchased a new Mac and shoved the iBook in a box (About 7 years ago). It died from the logic board/display issues that all those dual-USB iBooks had. I actually had one, or maybe even two, logic board(s) replaced under warranty, but it eventually went out again, and I just bought a whole new laptop. I know I have a ton of photos from college on there, and that's really the data I'm now after! I can get the screen to work most of the time by placing a clamp under the 'Option' key on the left half of the keyboard. New problem though, as fired it up to take a stab at finding my data; I'm getting a flashing question mark when it boots up, which a little research shows is indicative of hard drive failure... My photos!!! So I've messed around with the computer for an hour or so, and haven't had any luck.
    First and foremost, does the flashing question mark mean that data's dead and gone for good, period? Or could the drive itself be fine, but the controller/cables be bad? Sadly, ten years later I don't have the install CD, so that's not an option. I used a random OS9 disc I found online, but it wouldn't boot off that either; I'm guessing because it's not the original OS CD for this model... I also can't get the 'Firewire target' to work. The oldest computer I have in the house is an Intel 2ghz core duo 2 (exact machine @ http://bit.ly/LqDkzw) running 10.6. I'm guessing the new machine/OS won't do the Firewire target mode, as I've been unsuccessful when I've tried. I just read there are different Firewire 400 vs Firewire 800 cables, so I guess I could just be using the wrong cable as well..? I found an old Firewire cable to even try this in the first place, but I have no idea if it's 400 vs 800. Or would a bad hard drive preclude the Firewire target mode anyway?
    I've also tried random things like Ethernet connections, but no luck. I'm guessing the probably-wide OS gap won't allow them to communicate anyway.
    I found a bunch of these laptops on ebay for $45, So I guess I could just buy one used, and swap the hard drives? That way, if the HD it self’s ok, moving it to a new home might help (plus it'd fix the logic board issue). Downside is that the hard drive swap doesn't look easy at all, and I could end up messing up the HD even more.
    I've never used a data recovery business, but is that possibly my best bet? I have no idea how much they cost, but I think a friend said his data recovery cost like $250. In all honestly I think I'd pay $250 for my old memories, I'm just not sure where to go from here. If anyone has suggestions on fixing it, or ANY suggestions on who’s a good merchant to handle this, I'd greatly appreciate any advice. Thanks all!

    I use the external caddy as edex67 has suggested you try. This is probably the cheapest and easiest way to recover the pics providing that the hard drive is working. The only catch is you must remove the drive in order to attach to the adapter. Since you are not trying to resurect the iBook, the drive removal would be easier as disassembly would not have to be as cautious. Below links to disassembly and a source for an adapter.
    http://www.ifixit.com/Device/iBook_G3_12%22
    http://eshop.macsales.com/item/NewerTech/U3NVSPATA/

  • Data Recovery - External Hard Drive

    Hi,
    I have recently copied over a folder on my iOmega (Prestige Portable) External Hard Drive with a folder from my Power Book Hard Drive, with the replace all.
    What I need to know is there a way to step back to the point before I copied over this folder?
    Ok so here comes the Dumb bit, I have never set up Time Machine! Yes I know, very stupid!
    So I'm now in the process of seeing if it is possible to step back with data recovery software and if this is possible what do people reccomend! I have tried SanDisk RescuePro but It comes up with a message saying that the drive is too big, I think it is meant for Flash Drives!
    Have I posted this in the right Discussion thread? If not were do you think I would be best to post this?
    Thanks

    Johno11111 wrote:
    Ok so here comes the Dumb bit, I have never set up Time Machine! Yes I know, very stupid!
    Us mere mortals do tend to learn things the hard way, don't we?
    So I'm now in the process of seeing if it is possible to step back with data recovery software and if this is possible what do people reccomend!
    FIrst, stop using the drive immediately. If the files haven't been overwritten already, the more you use it, the more likely that is.
    There are several Data Recovery apps for Macs; +Data Rescue II+ seems to be the one mentioned here most often, but others get good reviews, too. I've not used any, so can't say one is better than another.
    I understand you'll need another external disk to receive the recovered files. (But you'll probably need one anyway for Time Machine or other backup app that you'll be using regularly from now on, right? You can use a second internal HD, Time Capsule, or in some cases back-up over your network.)
    I also understand that some of these apps have a trial version that will tell you whether there's anything to be recovered, and perhaps recover a single file, so you don't spend the $$ for nothing.
    Look for +Data Recovery+ via Google, VersionTracker.com or MacUpdate.com. The last two have user reviews. Just be certain whatever you use is compatible with Leopard.
    And/or, search for +Data Recovery+ in the Using Leopard forum.
    Once this is sorted out (or to explore Time Machine options), you might want to review these:
    Time Machine Tutorial
    Time Machine 101
    How to back up and restore your files
    Time Machine Features
    Apple - Support - Mac OSX v10.5 Leopard Time Machine
    and perhaps browse the Time Machine - Frequently Asked Questions *User Tip* at the top of this forum.

  • Data Recovery After Hard Drive Failure!

    Ok, basically, I've got a 2 1/2 year old iBook G4 with a bombed hard drive, and unfortunately, the last time I backed up was around 3 months ago. Here's what happened right before the crash: some applications like Widgets and Safari were acting fluky, and it wouldn't let me open Word documents, so I restarted, because I thought it might have something to do with the fact that i had downloaded the new version of itunes not that long ago and hadn't restarted since. well, when i restarted, the gray screen with the wheel and the apple symbol went on for a really long time, and then the blue screen came up with the cursor, but nothing else happened, and the blue screen just stayed there. as far as i know, the hard drive wasn't making any unusual noises, just the usual occasional soft sounds that my hard drive has always made (there are usual sounds, right?) a piece of information that might be useful is that the hard drive was almost full (it only had about 5 GB left, which i understand is how much you should leave) could this have caused the failure maybe? anyway, i tried using the hard drive as a target and tried getting another computer to recognize it and pull the files off, but that didn't work. so, i brought it into the apple store, and they got it to boot up but using some external hard drive, i think. they tried disk utility, but that didn't see my hard drive. then the tried disk warrior, and that saw it and repaired it or something, but then it couldn't get the drive to mount. so, i'm assuming that because disk warrior didn't work and couldn't get it to mount, then other software like data rescue, etc... won't either. like all computer users, i've got some REALLY REALLY important data on there, and all the data recovery places i've gotten quotes from are pretty pricey. if the drive doesn't require physical data recovery, only non-physical, as i hope, the cheapest is still $350. even so, the person on the phone there didn't seem to know nearly as much as the people at the more pricier places. so, are there any other options besides expensive data recovery? i read something about using dd - a unix thing, but i don't know the first thing about it (http://www.macosxhints.com/article.php?story=20050302225659382) so i'm not sure i want to risk messing it up even more. and, if worse comes to worst, then i'll use a data recovery place... but can anyone tell me if they've used any of the data recovery companies below, and which ones are good?
    (first three do evaluation for free, and then you decide if you want to continue based on more accurate price idea)
    MacintoshDataRecovery.com
    $500 non physical
    $1100-1600 physical
    Heroic Efforts
    http://www.heroicdata.com/data_recovery
    $350 non physical
    ships to another (very expensive) place if physical
    ACS Data Recovery
    http://www.acsdata.com/index.htm
    $600-700 non physical
    DriveSavers.com
    (recommended by Apple, probably the best, but the most steep, too)
    could cost anywhere from $500-$2700 and $200 evaluation fee even if data is unrecoverable
    Since this is our fourth hard drive failure in four different iBooks in 2 1/2 years, i am starting to become seriously disillusioned about the quality of the hardware Apple uses...not that i would ever get a dell or anything, but still....
    THANK YOU in advance for any tips you might be able to offer, and also for reading this extremely long post!
    katie
    iBook G4   Mac OS X (10.4.3)  
    iBook G4   Mac OS X (10.4.3)  

    I have read good reports concerning Data Rescue although I have not used it myself.
    Once you get your data back, focus on a regular (even daily) backup routine, because as you know only so well, the question is not if a drive will fail, it's when.
    My condolences, by the way.

  • Data Recovery Options?

    In the process of transferring from a POP3 Account to IMAP, I deleted a POP3 Account and lost a lot of email's I still need. I've seen some data recovery options such as File Salvage, but I'm wondering if there are any cheaper options out there? Thanks for the help.

    What an awful thing to have happen! Especially on such a special and happy day! You have my deepest sympathy.
    From what I understand, as long as the data has not been overwritten, you should be able to recover it. I will have to let the explanation of how to do this rest with people more knowledgeable than I am, as I have never had occasion to have to do this. But I have no doubt that they will post the appropriate resources.
    I have been told that the only way to destroy a hard drive so that you can't recover the information is with a hammer. That said, it could still be costly. But unless your new backup partially wrote over some of your previous backup, it should be recoverable.
    Good luck, and have a happy honeymoon--don't let this spoil it! And the best of everything for your future!

  • Data recovery / disc repair help

    can anyone recommend the best data recovery and repair program to use with ext hard drives ?
    thanks

    Check out File Salvage
    Regards
    TD

Maybe you are looking for

  • Problems met when upgrading APEX within Oracle XE to APEX 4.0

    Hi, When I tried to upgrade APEX within Oracle XE to APEX4.0, I met problems. Here's how I did (I'm on windows 7): 1. Downloaded the latest oracle xe database (based on 10.2.0.1) 2. Installed it by running the setup.exe. The installation was success.

  • Talk to a live person about bill

    Why can't I speak with someone about my bill? I called the 800 number but the automated system keeps telling me to dial #611 from my phone. I am currently out of the country and can't do that. Also the online live chat is not working. No window is po

  • Start and Stop Oracle BI services on UNIX box?

    Hi All, We have OBIEE installed on the Unix Servers and want to start and stop the Bi services. What is the command to do so?

  • CS4 Student Standard

    I am trying to run the cs4 student standard. A split second after it runs a system profile check and the serial entry window pops up I get "Adobe setup has encountered a problem and needs to close. We are sorry for the inconveniance". I uninstalled m

  • Suggestion Required for Best Solution

    Hi All, Please share your thoughts for the best solution to implement. Scenario: ATG to interact with the Middleware layer. ATG will be the webportal front end and there will be different sales channels.ATG Product catalog will be the product master.