VO Attribute displaying lookup meaning for code

Hi experts,
How to make a VO attribute display lookup meaning for the code stored in DB into the query results table?
Regards
Ari

Hi,
Your lookup code is stored in DB table. So. it should be there in your VO query.
Now you want to have its meaning as well in that VO query.. right ?
For this, add another column in VO query like:
(select meaning from fnd_lookup_values where lookup_code = XxEO.code) code_meaning
--Sushant

Similar Messages

Display lookup value for update in a form field

OK, this seems like a simple thing to do, but for some reason I can't seem to figure it out.
I have a table with several foreign keys which are number ids. I've created a form using shared component dynamic LOVs for those fields where the LOV retrieves display values from the foreign key related tables . So far, so good. If I run the form to create a new record, it works fine. But if I call the form from a report with a link column (ala Master-Detail Form) for update purposes, all the data is fetched into the form properly except the foreign key related table LOV display data. The LOV data fetched into the fields is always the first value in the LOV list, and not the value based upon the foreign key values in the record. I want the value displayed to be based upon the foreign key in the record.
What am I doing wrong?
Edited by: 950335 on Aug 7, 2012 2:52 PM

Figured it out.

How to display different text for labels in Group Above Report Oracle Repor

Hello,
Is there a way to change the text that is displayed in Labels in a Group Above Report? For example, I have a Group Above report with my columns of data and above the columns I have my column labels, but I would like to be able to display various text, i.e. different labels based on condition. In other words, Column1 label could say Column 1 or This is Column1, based on a condition. This is Oracle Report Builder 10.1.2.0.2.
Thank you.

968277 wrote:
I'm thinking it is possible with a Format Trigger, but I've only ever returned (TRUE) or (FALSE). I am very new to Oracle Reports Builder. Thanks.Hi,
Yes it's possible. and your are in the right place. use this true and false. For example
/*true means display, false means don't display */
if your_criteria_or_condition is ok then
return (TRUE);
else
return (FALSE);
end if;create as many label as your need and control with the code..
Hope this works..
Hamid
Mark correct/helpful to help others to get right answer(s).*

One to one mapping question -- can I just map a lookup field for queries?

I have a table with a state code. I'd like to have a "virtual lookup" on the java class to a region table. I.e., this java class "studies" has a state code. I can map a one-to-one to the descriptor class that has the ref table, but I'd like to have a property in the java class pre-mapped to the "region" field in this lookup so for querying i can just use:
ReadAllQuery q = new ReadAllQuery();
q.setReferenceClass(study.class);
q.setSelectionCriteria(new ExpressionBuilder().get("Region").equal(Region));
to get all the studies for a particular region.
am I going about this wrong? or do I have to get the reference table descriptor fromt he one to one map and do something different?

well,on the way home last nite, I realized I'd had a complete brain fart. I've done this before. I just set up a 1-1 map between descriptors and then built the query like this:
q.setSelectionCriteria(new ExpressionBuilder().get("refFPO").get("FPO_NO").equal(FPO));
You can get the pointer to the "refFPO" which is the the descriptor mapped 1-1, then appended the column you wish to get.
I still went ahead and amended my class to include a read-only, non-toplink mapped attribute "FPO" which just gets the reference variable pointing to "refFPO.getFPO_NO();
I answered my own question just in case anyone wondered ....

Urgent! Display lookup value and return value at the same time.

We are using pop up lov.
How can we display lookup value and return value at the same time. let me claer..
Our lov query is like fallowing
select dname, deptno from dept
we want to return deptno column into a database bind text item and dname column into a display item (look up)
can we do it (we need to do)
thanks for your help.

We did it .
But pop up key lov (display description return value ) property doesn't appear for tabular forms item.
(Report Attributes pages Tabular Form Element section display As property list)
can we set or not.
Thank you.

Error message 'Display only possible for print documents'

Hi All,
This issue is with the transaction code ME21N. When the user clicks on PRINT PREVIEW it gives an error of 'Display only possible for print documents'. When the user clicks the MESSAGES tab and then COMMUNICATION METHOD tab it gives an error 'No communication data has been defined for transmission medium 6'. The vendor is not getting the order. Does anyone has any idea of what these error messages mean and where should I look further?
Thank you,
Regards,
Shanu

Hi
this seems tobe relates to print program "" ask your ABABer what program he has written to send the PO to vendor your problam willbe solved.
the moment you give the print it will ask the printer by default LP01 then print immediately check you need to do that.then beground print program and partner you need check. whether this out type you have assigned to this partner or not (vendor). check complecte condition technic.diffnettly it will works.
i hope you have understood
thanks &Regards

How to display help text for Region in a page having more than one region

Hi all,
I want to display help text for each region in my page. I have 5 regions in my page.
I have a big help text for each of my region so can any easy way is there to put the help text for each region more than 10 lines .I tried lot by searching forums but not able to implement. any document is there then please let me know.
Thanks in advance,
Amit

i mean either if we click the region title name it should display some help text of near about 10 lines in a popup window.
Or on moseover whenever we will put the cursor into the region title then it should displat the help text message of line 10.
Hope you will get my qustion well.
Thanks,
Amit

How to get lookup value for a lookup_type and pass as a parameter in OAF

Hi,
I have requirement wherein I have to enable the "Add Attachment" Button only for a particular deliverable name.
Steps I followed
1) I have extended the corresponding Controller class.
2) Sting str1="XYZ";
3) Getting the attachment table bean and the deliverable name thru Data Mappings as Attachment is the built-in funtionality in OAF.
4)Checking if the deliverable name whether it is equal to str1 or not
Case1: If the deliverable name is not equal to str1 then I am placing the insertallowed as BOOLEAN.FALSE
Case2:If not it will be enabled.
5)The functionality as per the requirement is working fine.
6)Here for str1 I have hardcoded the value initially but I need to take up the value from a lookup created for this value because may be in future if for more than one value the "Add Attachment" Button has to enabled they it will be easy to add in the look up only. No need to change the controller class.
7) So please let me know the steps in getting the value from a lookup and have to pass the lookup values (Here str1--"XYZ","ABC","DEF") into the extended Controller Class.
Thanks in Advance,
Regards,
Ramya

Ramya,
Here for str1 I have hardcoded the value initially but I need to take up the value from a lookup created for this value because may be in future if for more than one value the "Add Attachment" Button has to enabled they it will be easy to add in the look up only. No need to change the controller class.For this u need to iterate through the lookup values.
Share ur existing Controller Code.
Regards,
Gyan

Display document header for a parked document in ECC 6.0

Hi,
Does anyone know how to view the header information of a parked document? I cannot find the u201CDisplay header/hatu201D icon anymore when I go to display a parked document via FBV3. This is in ECC 6.0 whereas; in 4.6C I see the u201Chatu201D icon. For the same parked invoice, in ECC 6.0 it is calling FV63 whereas in 4.6C it is calling FBV3 internally to display the parked document when document, company code and FY are input on FBV3 and hit continue.
Please let me know if there is way to display header info for a parked document in ECC 6.0.
Thanks,

Thanks for your reply!!
What document are you displaying? I tried displaying a parked vendor invoice and that is when I do not see the hat icon. Probably you are displaying a G/L document (example SA), I am able to see the hat icon in that case.
In 4.6C, it calls FBV3 internally for displaying both invoices and regular g/l documents whereas, in ECC 6.0 it is calling FV63 if it is an invoice and on FV63 I do not see a hat icon. So, was wondering is that how it is or is there any setting that needs to be turned on?
Thanks,

Error while using LiveCycle java APIs with Http servlets:"Remote EJBObject lookup failed for ejb/Inv

Hi all,
When i try to run more than one servelt of the Quick Start samples that using Livecycle Java APIs and i get an error of "Remote EJBObject lookup failed for ejb/Invocation provider" from any servelt i run.
I try some Quick samples which is not servelts (java class) and it works fine, which makes me sure that my connection properties is true.
Environment:
The LiveCycle is based on "Websphere v6.1", and i use "Eclipse Platform
Version: 3.4.1".
i install "tomcat 5.5.17" to test the servelts in developing time through Eclipse.(only for test in developing time not for deploy on )
The Jars i added in the classpath:
adobe-forms-client.jar
adobe-livecycle-client.jar
adobe-usermanager-client.jar
adobe-utilities.jar
ejb.jar
j2ee.jar
ecutlis.jar
com.ibm.ws.admin.client_6.1.0.jar
com.ibm.ws.webservices.thinclient_6.1.0.jar
server.jar
utlis.jar
wsexception.jar
My code is :
Properties ConnectionProps = new Properties();
ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_EJB_ENDPOINT, "iiop://localhost:2809");
ConnectionProps.setProperty ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_ EJB_PROTOCOL);
ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE,ServiceClientFa ctoryProperties.DSC_WEBSPHERE_SERVER_TYPE);
ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "Administrator");
ConnectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");
ConnectionProps.setProperty("java.naming.factory.initial", "com.ibm.ws.naming.util.WsnInitCtxFactory");
//Create a ServiceClientFactory object
ServiceClientFactory myFactory = ServiceClientFactory.createInstance(ConnectionProps);
//Create a FormsServiceClient object
FormsServiceClient formsClient = new FormsServiceClient(myFactory);
//Get Form data to pass to the processFormSubmission method
Document formData = new Document(req.getInputStream());
//Set run-time options
RenderOptionsSpec processSpec = new RenderOptionsSpec();
processSpec.setLocale("en_US");
//Invoke the processFormSubmission method
FormsResult formOut = formsClient.processFormSubmission(formData,"CONTENT_TYPE=application/pdf&CONTENT_TYPE=app lication/vnd.adobe.xdp+xml&CONTENT_TYPE=text/xml", "",processSpec);
List fileAttachments = formOut.getAttachments();
Iterator iter = fileAttachments.iterator();
int i = 0 ;
while (iter.hasNext()) {
Document file = (Document)iter.next();
file.copyToFile(new File("C:\\Adobe\\tempFile"+i+".jp i++;
short processState = formOut.getAction();
...... (To the end of the sample)
My Error was:
com.adobe.livecycle.formsservice.exception.ProcessFormSubmissionException: ALC-DSC-031-000: com.adobe.idp.dsc.net.DSCNamingException: Remote EJBObject lookup failed for ejb/Invocation provider
at com.adobe.livecycle.formsservice.client.FormsServiceClient.processFormSubmission(FormsSer viceClient.java:416)
at HandleData.doPost(HandleData.java:62)
at HandleData.doGet(HandleData.java:31)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
a

I assume here that your application is deployed on a different physical machine of where LCES is deployed and running.
Do the following test:
- Say that LCES is deployed on machine1 and your application is deployed on machine2. Ping machine1 from machine2 and note the ip address.
- Ping machine1 from machine1 and note the ip address.
The two pings should match.
- Ping machine2 from machine1 and note the ip address.
- Ping machine2 from machine2 and note the ip address.
The two pings should match.
Usually this kind of error would happen if your servers have internal and external ip addresses.

Device Manager displayed " Mass Storage Controller (Code 28)"

Greetings to all Members
I am using AMD 64 x2 3800+ processor. MSI mortherboard K8N Diamond. Graphic cards, two units, Geforce GTX6600GT. I am running on Window XP SP2. I have also updated the AMD latest drivers.
I noticed each time I log on the computer, the computer would prompt "New Mass Storage Hardware Found" and prompt the wizard to install new found hardware.
I went to device manager and noticed the device status display "This drivers for this device are not installed (Code 28). I have also carry out all the steps as suggested from the device manager menu. Mass Storage Controller location is: PCI Slot 9 (PCI 3, device 0, function 0 is displayed at the Mass Storage Controller Display. The device Instance ID display "PCI\VEN_1095&DEV_3132&SUBSYS_710A1462&REV_01\4&14AECDBO&0&0060.
Try update driver option but to no success. Have all the driver systems (in the CD) that came together with the system installed as well. Again to no success in resoluting the problem.
To my horror after installing the drivers that I have downloaded from MSI website for the said board.
I notice the Virtual drive program failed to initialize.and the following messages were displayed during the installation of the website drivers for the said mortherboard:
There was a problem installing this hardware
Mass Storage Controller
An error occured during the installation of the device. The name is already in use as either a service or a service display name.
Can someone please help me to resolve this problem? Any suggestion or advise would be sincerelt appreciated.
Best Regards
Harry
Can someone please assist and provide me with some guidelines to resolve this problem.

Hi Bas
I manage to remove the yellow exclamation mark from the hardware, device manager by setting the Integrated Peripherals on Board Sil3132 mode from Sata to Raid.
The Sata and Raid controllers is displayed and upon opening it up further, I noticed the following controllers are displayed:
1 ) FarStone CDAWDM2001 SCSI Host Adapter.
2) Silicon Image SIL3132 SataRaid Controller.
Do you think I have set the right thing? Your kind opinion on this. I am using BIOS version used is 1.A
Thanks
Best Regards
Harry

What does the field Inconsistent mean for ABC Analysis for Cycle Counting report

What does column "Inconsistent" mean for report ABC Analysis for Cycle Counting (T-code MIBC)? The reason I'm asking is because I see TotalStock values greater than 0, but the Accounting 1 view for Material Master and MMBE both show zero stock. I do not understand why TotalStock in the report does not show zero. Can anyone explain how this can happen?
Note: the report is run for consumption/usage date range.
Thank you,
Doug

Hi,
MBEW table and MMBE transaction will show the current stock. When you run MIBC report for consumption, the system considers the consumption for the date range given (from MVER table), which may not be equal to the current stock. Refer the KBA: 1817237 - Stock quantities and stock values in MIBC which explains the system design.
Regards,
AKPT

Unable to display blinking icon for JTree

I am unable to see blinking icon for JTree node. If I use any other image which is not blinking, then I am able to see icon.
If blinking image is used, it shows blank image.
Please refer to following code.
import java.awt.BorderLayout;
import java.awt.Color;
import java.awt.Component;
import java.net.URL;
import javax.swing.ImageIcon;
import javax.swing.JApplet;
import javax.swing.JScrollPane;
import javax.swing.JTree;
import javax.swing.tree.DefaultMutableTreeNode;
import javax.swing.tree.DefaultTreeCellRenderer;
public class TreeApplet extends JApplet {
JTree tree;
DefaultMutableTreeNode root;
DefaultMutableTreeNode node1;
DefaultMutableTreeNode node2;
DefaultMutableTreeNode node3;
DefaultMutableTreeNode node4;
private ImageIcon errorIcon = null;
private URL resource = null;
private static final long serialVersionUID = 1L;
public void init() {
     errorIcon = loadIcon("images/errorBlink.gif");
     root = new DefaultMutableTreeNode(new ProcessInfo("root", "error"));
     node1 = new DefaultMutableTreeNode(new ProcessInfo("Node1", "info"));
     node2 = new DefaultMutableTreeNode(new ProcessInfo("Node2", "warn"));
     node3 = new DefaultMutableTreeNode(new ProcessInfo("Node3", "debug"));
     node4 = new DefaultMutableTreeNode(new ProcessInfo("Node4", "error"));
     node1.add(node2);
     node3.add(node4);
     root.add(node1);
     root.add(node3);
     setLayout(new BorderLayout());
     tree = new JTree(root);
     tree.setCellRenderer(new TreeRenderer());
     add(new JScrollPane((JTree) tree), "Center");
private class TreeRenderer extends DefaultTreeCellRenderer {
     private static final long serialVersionUID = 1L;
     public TreeRenderer() {
          this.setBackgroundSelectionColor(Color.lightGray);
          this.setBorderSelectionColor(Color.BLACK);
     public Component getTreeCellRendererComponent(JTree tree, Object value, boolean sel, boolean expanded, boolean leaf,
          int row, boolean hasFocus) {
          super.getTreeCellRendererComponent(tree, value, sel, expanded, leaf, row, hasFocus);
          setIcon(getStatus(value));
          return this;
     private ImageIcon getStatus(Object value) {
          DefaultMutableTreeNode node = (DefaultMutableTreeNode) value;
          ProcessInfo nodeInfo = (ProcessInfo) node.getUserObject();
          String status = nodeInfo.getStatus();
          if ( status != null ) {
          if ( status.equalsIgnoreCase("error") ) {
               return errorIcon;
          return null;
private ImageIcon loadIcon(String name) {
     ImageIcon icon = null;
     resource = this.getClass().getResource(name);
     if ( resource != null ) {
          icon = new ImageIcon(resource);
     return icon;
}

1. Use code tags to post codes -- [code]CODE[/code] will display asCODEOr click the CODE button and paste your code between the {code} tags that appear.
2. A renderer is just a "rubber stamp" used to paint on the table/tree/list/whatever. You can't display animation in an ImageIcon by setting it to a renderer. Since the JLabel subclass used as the renderer isn't a part of any visible component hierarchy, the icon won't be refreshed with new frames.
db

How to display icon symbols for a field in se38 program

HI
IAM VIJAY. PLS GIVE ME THE SOLUTION .
how to display icon symbols for a field in se38 program.
WITH REGARDS.
VIJAY.

Hi
you cab use INCLUDE <ICON> and use standard icons provided by sap.
Sample code:
WRITE /20(2) ICON_DATE AS ICON.
WRITE /20(2) ICON_TIME AS ICON.
WRITE /20(2) ICON_ADDRESS AS ICON.
Thanks!!

SSRS Sharepoint Integrated Mode logs - Cannot find site lookup info for request Uri AND [Forced due to logging gap]

Hi,
Our reports run very slow in SharePoint Integrated mode. I look at the logs and I see that for one report request there are bunch of "Forced due to logging gap" rows. Is it some kind of a configuration issue or is it working as it should. Below
is the full log for one report request. I have no admin experience at all and I am confused what each one in the logs mean. I have made some of them in bold font as I suspect it is some kind of configuration issue there. Could you please help understanding
those logs?
Line 25: 07/29/2014 09:17:34.54
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
Topology
e5mb
Medium
WcfReceiveRequest: LocalAddress: 'http://xxxxx.com:32843/6ce1fa50211546eeabe466d78f0d32a6/ReportStreaming.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sqlserver/reporting/2011/06/01/ReportServer/Streaming/ProcessStreamRequest'
MessageId: 'urn:uuid:10b1c246-8c70-400b-9b62-fe0d87a2ae8c'
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 28: 07/29/2014 09:17:34.54
w3wp.exe (0x0A6C)
0x070C
SQL Server Reporting Services
Report Server WCF Runtime
0
Medium
Entering ExeuteCommand - Command = Render
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 29: 07/29/2014 09:17:34.54
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
Authentication Authorization
agb9s
Medium
Non-OAuth request. IsAuthenticated=False, UserIdentityName=, ClaimsCount=0
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 30: 07/29/2014 09:17:34.54
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
General
adyrv
High
Cannot find site lookup info for request Uri http://xxx:32843/6ce1fa50211546eeabe466d78f0d32a6/ReportStreaming.svc.
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 31: 07/29/2014 09:17:34.59
w3wp.exe (0x0A6C)
0x070C
SQL Server Reporting Services
Report Server Catalog
0
Medium
RenderForNewSession('https://xxx.com/xxx.rdl')
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 32: 07/29/2014 09:17:34.60
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
Authentication Authorization
ajmmt
High
[Forced due to logging gap, cached @ 07/29/2014 09:17:34.59, Original Level: VerboseEx] SPRequestParameters: AppPrincipal={0}, UserName={1}, UserKye={2}, RoleCount={3}, Roles={4}
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 33: 07/29/2014 09:17:34.60
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
Database
8acb
High
[Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 34: 07/29/2014 09:17:34.62
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
General
adyrv
High
Cannot find site lookup info for request Uri http://xxx:32843/6ce1fa50211546eeabe466d78f0d32a6/ReportStreaming.svc.
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 35: 07/29/2014 09:17:34.74
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
Database
7t61
High
[Forced due to logging gap, cached @ 07/29/2014 09:17:34.63, Original Level: Verbose] {0}
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 36: 07/29/2014 09:17:34.74
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
General
6t8b
High
[Forced due to logging gap, Original Level: Verbose] Looking up {0} site {1} in the farm {2}
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 37: 07/29/2014 09:17:34.85
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
Runtime
afu6a
High
[Forced due to logging gap, cached @ 07/29/2014 09:17:34.77, Original Level: VerboseEx] No SPAggregateResourceTally associated with thread.
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 38: 07/29/2014 09:17:34.85
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
Runtime
afu6b
High
[Forced due to logging gap, Original Level: VerboseEx] No SPAggregateResourceTally associated with thread.
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 39: 07/29/2014 09:17:34.94
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
Database
7t61
High
[Forced due to logging gap, cached @ 07/29/2014 09:17:34.88, Original Level: Verbose] {0}
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 40: 07/29/2014 09:17:34.94
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
Database
7t61
High
[Forced due to logging gap, Original Level: Verbose] {0}
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 103: 07/29/2014 09:18:05.55
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
Database
7t61
High
[Forced due to logging gap, cached @ 07/29/2014 09:17:34.96, Original Level: Verbose] {0}
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 104: 07/29/2014 09:18:05.55
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
General
6t8b
High
[Forced due to logging gap, Original Level: Verbose] Looking up {0} site {1} in the farm {2}
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 105: 07/29/2014 09:18:05.62
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
General
6t8h
High
[Forced due to logging gap, cached @ 07/29/2014 09:18:05.55, Original Level: Verbose] {0}
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 106: 07/29/2014 09:18:05.62
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
Database
7t61
High
[Forced due to logging gap, Original Level: Verbose] {0}
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 107: 07/29/2014 09:18:05.62
w3wp.exe (0x0A6C)
0x070C
SQL Server Reporting Services
Report Server WCF Runtime
0
Medium
Processed report. Report='https://xxx.com/xxx.rdl', Stream=''
894aa99c-9fb3-c007-caf4-32ba68af9901
Thank you.

That is likely the case as native mode is quicker than SharePoint-integrated.
A couple of things to check, and perhaps change if you can:
1) Make sure the latest SSRS ReportViewer is deployed to the SharePoint WFEs. This does not have to match your SSRS deployment version. See http://msdn.microsoft.com/en-us/library/gg492257.aspx
for the compatibility table.
2) If possible, move SSRS to the same SharePoint servers that end users interact with (e.g. the "WFEs").
3) Make sure the underlying server hosting SharePoint has C-States disabled (these are Intel C-States, e.g. C1, C2, C3... aka processor sleep states). If the server has any sort of power regulation, make sure it is at maximum performance (rather than some
form of power saving).
4) Make sure the underlying Windows OS has it's Power Management set to Maximum, rather than any sort of power savings.
You can review the execution logs in the Reporting Services database. Take a look at the ExecutionLog3 view. Compare the TimeProcessing (time it takes to process the report) and TimeRendering (time it takes for the processed report to render to the end user).
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

VO Attribute displaying lookup meaning for code

Similar Messages

Maybe you are looking for