Voice class
Hi,
i have a problem with the Voice class,
i'm trying to switch Voices in an interface, in a Choice item, which selects leaVoice or marcoVoice,
the probleme is that if i chose one of the 2 voices, my code doesnt change the voice for the next tries,
my program synthesizes voice, and i can chose at any moment if i want to use lea or marco voice, my variables are changed when the Choice item is modified, but at the creation of the synthesizer, the voice used is always the same as the first initialized voice!
you can see a part of my code just below:
thanks for your help
Sako
static Voice leaVoice = new Voice(null, Voice.GENDER_FEMALE, Voice.AGE_YOUNGER_ADULT, null);
static Voice marcoVoice = new Voice(null, Voice.GENDER_MALE, Voice.AGE_YOUNGER_ADULT, null);
// Create the voice synthesizer
private void makeSynthesizer(String Lang, String Country, String persoVoice) {
try {
parler = 1;
try {
// Create a synthesizer
SynthesizerModeDesc mode = new SynthesizerModeDesc(new Locale(Lang, Country));
if (persoVoice.equals("Lea")) mode.addVoice(leaVoice);
/*Here is the problem <=*/ else mode.addVoice(marcoVoice);
/*the new voice is not added? <=*/ synth = Central.createSynthesizer(mode);
} catch (Exception e) {
parler = 0;}
private void animate() {
try {
makeSynthesizer(Lang, Country, Perso);
int i = 0;
}
which API are you using ?
Similar Messages
-
Hi,
I have a sip trunk terminating on a CUBE. On the CUBE, I hard-code the dial-peer 211 with G.729 codec. On an inbound call to a DID terminating on the IP phone, the call negotiated g.729 and completed successfully. No issues.
Now I created a voice class codec with 2 codecs in the following preferences
voice class codec 1
codec preference 1 ---> g729
codec preference 2 ---> g711
I then apply this to a dial-peer 211.
On an inbound call from the same incoming number to the same DID(same endpoint), this call is now negotiated only at G.711 codec. I verified that I am hitting the same dial-peer by using "show call active voice brief" and checking the pid. It is using dial-peer 211.
My expectation is that the call will still negotiate G.729 and will use G.711 only if the call cannot be completed at G.729.
As a test, I also verified by removing codec preference 2 (i.e.) G.711 from voice class codec 1 and call negotiated at G.729.
BTW, in each scenario, I used the show voice call active compact to verify the call legs and codecs being used.
CUCM version 9.1 and IOS 15.1(4). Any ideas why this odd behavior?
Regards,
K iyerHere is the catch with CUCM. CUCM always prefers and will use the "best available codec" offered. Therefore, when the gateway forwards the setup to CUCM, it would see g711 as a valid option and would use it. Here is more info on the same:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/9_1_1/ccmsys/CUCM_BK_C5565591_00_cucm-system-guide-91_chapter_0101.html#CUCM_RF_RE6237E1_00
Regions
Regions provide capacity controls for Cisco Unified Communications Manager multi-site deployments where you may need to limit the bandwidth for individual calls that are sent across a WAN link, but where you want to use a higher bandwidth for internal calls. Additionally, the system uses regions also for applications that only support a specific codec; for example, an application that only uses G.711. Use regions to specify the maximum transport-independent bit rate that is used for audio and video calls within a region and between regions; in this case, codecs with higher bit rates do not get used for the call.
Cisco Unified Communications Manager prefers codecs with better audio quality. For example, despite having a maximum bit rate of 32 kb/s, G.722.1 sounds better than some codecs with higher bit rates, such as G.711, which has a bit rate of 64 kb/s.
HTHs
Please rate helpful posts. -
Voice class uri - how to define subnet
Hi,
Does anyone know if there is a way to define IP subnet with "voice class uri" command instead of just one host?
I would like to use it as incoming uri XXX inside dial-peer.
Thanks in advanceHi Maciej
There is a subtle difference between host 10.10.10 and pattern 10.10.10
The pattern will match the entire URI, ie [email protected] will match.
To match a subnet, you can use
host 10.10.10 (which would also match 14.10.10.10)
or more specifically
host 10.10.10.[1-255] -
What is it meant by allowing g711 30ms and g729 60ms.. I know this has to do with the bytes per frames, but how would you put that in the voice-class codec command.. How do you come up with the the total of bytes to accomplish the task...?
i didt get your question,do you mean this?
voice class codec 101
codec preference 1 g729r8 bytes 40
codec preference 2 g723r63 bytes 48
codec preference 3 g723ar63 bytes 48 -
'voice-class codec' for SCCP phones (CME)?
Hi, with SIP phones it's possible to apply a codec voice class.
Let's say I have the following voice class:
voice class codec 1
codec preference 1 g722-64
codec preference 2 g711alaw
I can apply it for SIP phones, e.g. for pool 9:
voice register pool 9
voice-class codec 1
With SCCP phones, I can only set one codec with the 'codec' command under ephone.
My goal is to use 'codec transparent' in the dial peer and to let the phone itself negotiate the codec. How can I do this with SCCP phones?
For example, if I use 'codec transparent' in the dial-peer and someone (who doesn't support g722) calls me, then the SIP phone negotiates g711alaw with the other side and no transcoding is needed. This is what I also want for my SCCP phones. Am I missing a command?
I'm using CME 8.6The syntax for SCCP phones is the same. Just apply the class to the VoIP dial peers.
dial-peer voice 100 voip
tone ringback alert-no-PI
description For InBound VoIP
modem passthrough nse codec g711ulaw
voice-class codec 1 <<<<<
voice-class h323 1
incoming called-number .
fax rate disable
no vad
Please rate helpful answers! -
Calls are not getting thru in Cisco voice GW for a particular Number
Cisco gateway is connecte to a PBX with an Qsig interface, for a particualr destination number the calls are not gettin estabilished.
the output of the Q931 debug :
Aug 16 16:17:46.145: ISDN Se0/0/0:23 Q931: RX <- SETUP pd = 8 callref = 0x7E05
Bearer Capability i = 0x8090A2
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98396
Exclusive, Channel 22
Facility i = 0x9FAA068001008201008B0100A16E0202070102011530650201010A010
1800101A111A00FA50D0A010212083530303035393938A211A00FA50D0A010212083530303035393
938A312801054454C45434F4D20574F524B524F4F4DA412801054454C45434F4D20574F524B524F4
F4DA50C06062B0C02FF373730020500
Facility i = 0x9FAA068001008201008B0100A11D0202010002010080144E455453202
F204C4F4E472044495354414E4345
Calling Party Number i = 0x2183, '8168911010'
Plan:ISDN, Type:National
Called Party Number i = 0x89, '18553808521'
Plan:Private, Type:Unknown
Sending Complete
Aug 16 16:17:46.149: ISDN Se0/0/0:23 Q931: TX -> CALL_PROC pd = 8 callref = 0xF
E05
Channel ID i = 0xA98396
Exclusive, Channel 22
Aug 16 16:17:55.709: ISDN Se0/0/0:23 Q931: TX -> DISCONNECT pd = 8 callref = 0x
FE05
Cause i = 0x80BF - Service/option not available, unspecified
Aug 16 16:17:55.741: ISDN Se0/0/0:23 Q931: RX <- RELEASE pd = 8 callref = 0x7E0
5
Aug 16 16:17:55.741: ISDN Se0/0/0:23 Q931: TX -> RELEASE_COMP pd = 8 callref =
0xFE05
The Qsig and dial-peer configration :
interface Serial0/0/0:23
no ip address
encapsulation hdlc
isdn switch-type primary-qsig
isdn overlap-receiving
isdn incoming-voice voice
isdn send-alerting
no cdp enable
dial-peer voice 1 voip
description To CBTS GK
destination-pattern +1T
signaling forward rawmsg
session protocol sipv2
session target ipv4:10.9.5.10
session transport tcp
voice-class codec 1
dtmf-relay rtp-nte
no vad
interface Serial0/0/0:23
no ip address
encapsulation hdlc
isdn switch-type primary-qsig
isdn overlap-receiving
isdn incoming-voice voice
isdn send-alerting
no cdp enable
dial-peer voice 1 voip
description To CBTS GK
destination-pattern +1T
signaling forward rawmsg
session protocol sipv2
session target ipv4:10.9.5.10
session transport tcp
voice-class codec 1
dtmf-relay rtp-nte
no vadHi Raj,
My name is Edson Pineiro, I understand that your problem description is in regards to failed incoming calls from a qsig trunk.
According to the received q931 setup message I can see the called party number is 18553808521 and as so the gateway should route the dnis based on the best match in destination-pattern. My first suggestion would be to ensure your outgoing dial-peers has a matching destination-pattern that matches the dialed number, for example:
dial-peer voice 1 voip
destination-pattern 1T
The T is a wild card for any digit any length
Or you can be very specific.
dial-peer voice 1 voip
destinaton-pattern 18553808521
The next suggestion would be to ensure that your incoming pots dial-peers contains 'direct-inward dial'. This is so that you don't receive secondary dial tone when dialing in, which I don't think is happening here.
Another suggestion would be to remove 'isdn overlap-receiving' from interface serial 0/0/0:23. Reason being is that the DNIS received is enbloc and not overlapping. You can clearly see that the complete e164 number is received within the setup and no further digits are needed.
But overall the disconnect cause code is 0x80BF the 80 portion is related to the source of the disconnect which is the router and BF "Service/option not available, unspecified" which is described as:
The network or remote equipment cannot provide the service option that the user requests, due to an unspecified reason. A subscription problem can cause this issue.
Any ways seems like the router does not support the protocol or type of message included in the Setup. After decoding one of the facility message:
Facility i = 0x9FAA068001008201008B0100A16E0202070102011530650201010A010
1800101A111A00FA50D0A010212083530303035393938A211A00FA50D0A010212083530303035393
938A312801054454C45434F4D20574F524B524F4F4DA412801054454C45434F4D20574F524B524F4
F4DA50C06062B0C02FF373730020500
decode -->
Facility IE first byte (protocol profile): 0x9f(Network Extentions), depends on Network Protocol Profile
**Note:
**0x91/0x9f both be used by older qsig spec, including:
**ISO 11582:1995, ETSI 300 239:1993/1995
**newer qsig spec use 0x9f only, including:
**ISO 11582:1995/Cor.1:1999, ECMA 165(4th), ETSI 300 239:2003
**see CSCeb58118 for CCM compatibility issue
NetworkFacilityExtension ::= {
sourceEntity: 0
destinationEntity: 0
NetworkProtocolProfile not present
APDU is a ROSE
0
DivertingLegInformation2Invoke ::= {
invokeID: 1793
operationValue: 21
argument: DivertingLegInformation2Arg ::= {
diversionCounter: 1
diversionReason: 1
originalDiversionReason: 1
divertingNr: PrivatePartyNumber ::= {
privateTypeOfNumber: 2
privateNumberDigits: 50005998
originalCalledNr: PrivatePartyNumber ::= {
privateTypeOfNumber: 2
privateNumberDigits: 50005998
redirectingName: 54 45 4C 45 43 4F 4D 20 57 4F 52 4B 52 4F 4F 4D
originalCalledName: 54 45 4C 45 43 4F 4D 20 57 4F 52 4B 52 4F 4F 4D
Looks like this is a redirected call (call forward or transfer), the redireted number is "50005998" and the other end of the PRI maybe attempting to do either a 2 B channel transfer or B channel optimization, which is not supported certain gateways or needs the use of a tcl scripts. Any ways is it possible to confirm if such features are enabled on the other end of the qsig trunk? and what the number 50005998 is assigned too. This may warrant a TAC case.
However please ensure your carry through the first three configuration changes before looking at the possible bad facility message.
Here are some good documents on ISDN, IOS dial-peers and call legs:
Understanding debug isdn q931 Disconnect Cause Codes
http://www.cisco.com/en/US/tech/tk801/tk379/technologies_tech_note09186a008012e95f.shtml
Configuring Telephony Call-Redirect Features
Two B-Channel Transfer
http://www.cisco.com/en/US/docs/ios/voice/ivr/pre12.3_14_t/configuration/guide/ivrapp.pdf
Understanding Dial Peers and Call Legs on Cisco IOS Platforms
http://www.cisco.com/en/US/partner/tech/tk652/tk90/technologies_tech_note09186a008010ae1c.shtml
Understanding Direct-Inward-Dial (DID) on IOS Voice Digital (T1/E1) Interfaces
http://www.cisco.com/en/US/partner/tech/tk652/tk653/technologies_tech_note09186a00801142f8.shtml
Understanding Inbound and Outbound Dial Peers Matching on IOS Platforms
http://www.cisco.com/en/US/partner/tech/tk652/tk90/technologies_tech_note09186a008010fed1.shtml#prereq
Voice Translation Rules
http://www.cisco.com/en/US/partner/tech/tk652/tk90/technologies_tech_note09186a0080325e8e.shtml
Let me know how you go.
Thanks again for asking the tuff questions.
Cheers
Edson -
SIP Trunk - No voice with Single Number Reach
Hi Community.
I setup SIP Trunk with the CCA. Everything is working Call In and Call Out. Call Forward and so on.
But with Single Number reach is something wrong. The mobile phone is ringing and I can get the call, but I hear not any voice.
Can someone please help me out? Below the config.
version 15.1
parser config cache interface
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service internal
service compress-config
service sequence-numbers
dot11 ssid cisco-data
vlan 1
authentication open
dot11 ssid cisco-voice
vlan 100
authentication open
ip source-route
ip cef
ip dhcp relay information trust-all
ip dhcp excluded-address 10.1.1.1 10.1.1.9
ip dhcp excluded-address 10.1.1.241 10.1.1.255
ip dhcp pool phone
network 10.1.1.0 255.255.255.0
default-router 10.1.1.1
option 150 ip 10.1.1.1
ip domain name site1.365873.trk.ipvoip.ch
ip name-server 8.8.8.8
ip inspect WAAS flush-timeout 10
ip inspect name SDM_LOW dns
ip inspect name SDM_LOW ftp
ip inspect name SDM_LOW h323
ip inspect name SDM_LOW https
ip inspect name SDM_LOW icmp
ip inspect name SDM_LOW imap
ip inspect name SDM_LOW pop3
ip inspect name SDM_LOW netshow
ip inspect name SDM_LOW rcmd
ip inspect name SDM_LOW realaudio
ip inspect name SDM_LOW rtsp
ip inspect name SDM_LOW esmtp
ip inspect name SDM_LOW sqlnet
ip inspect name SDM_LOW streamworks
ip inspect name SDM_LOW tftp
ip inspect name SDM_LOW tcp router-traffic
ip inspect name SDM_LOW udp router-traffic
ip inspect name SDM_LOW vdolive
no ipv6 cef
multilink bundle-name authenticated
stcapp ccm-group 1
stcapp
isdn switch-type basic-net3
voice call send-alert
voice rtp send-recv
voice service voip
ip address trusted list
ipv4 0.0.0.0 0.0.0.0
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
no supplementary-service sip refer
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback pass-through g711ulaw
sip
registrar server expires max 3600 min 3600
localhost dns:site1.365873.trk.ipvoip.ch
no update-callerid
voice class codec 1
codec preference 1 g711alaw
voice register global
mode cme
source-address 10.1.1.1 port 5060
load 9971 sip9971.9-2-2
load 9951 sip9951.9-2-2
load 8961 sip8961.9-2-2
timezone 23
voice source-group CCA_SIP_SOURCE_GROUP_CUE_CME
access-list 2
translation-profile incoming SIP_Incoming
voice source-group CCA_SIP_SOURCE_GROUP_EXTERNAL
access-list 3
voice translation-rule 9
rule 1 /0041449475090/ /90/
rule 2 /0041449475091/ /91/
rule 3 /0041449475092/ /92/
rule 4 /0041449475093/ /93/
rule 5 /0041449475094/ /94/
rule 6 /0041449475095/ /95/
rule 7 /0041449475096/ /96/
rule 8 /0041449475097/ /97/
rule 9 /0041449475098/ /98/
rule 10 /0041449475099/ /99/
voice translation-rule 410
rule 1 /^0\(.*\)/ /\1/
rule 15 /^..$/ /0041449475090/
voice translation-rule 411
rule 1 /^0\(.*\)/ /ABCD0\1/
voice translation-rule 412
rule 1 /^ABCD\(.*\)/ /\1/
voice translation-rule 422
rule 15 /^ABCD\(.*\)/ /\1/
voice translation-rule 1000
rule 1 /.*/ //
voice translation-rule 1111
rule 1 /^9\([1-9]\)$/ /004144947509\1/
rule 15 /^..$/ /0041449475090/
voice translation-rule 1112
rule 1 /^0/ //
voice translation-rule 2000
rule 1 /0041449475098/ /98/
voice translation-rule 2001
rule 1 /0041449475097/ /97/
voice translation-rule 2002
rule 1 /^6/ //
voice translation-rule 2222
voice translation-profile AA_Profile
translate called 2001
voice translation-profile CALLER_ID_TRANSLATION_PROFILE
translate calling 1111
voice translation-profile CallBlocking
translate called 2222
voice translation-profile OUTGOING_TRANSLATION_PROFILE
translate called 1112
voice translation-profile PSTN_CallForwarding
translate redirect-target 410
translate redirect-called 410
voice translation-profile PSTN_Outgoing
translate calling 1111
translate called 1112
translate redirect-target 410
translate redirect-called 410
voice translation-profile SIP_Called_9
translate calling 3265
translate called 9
voice translation-profile SIP_Incoming
translate called 411
voice translation-profile SIP_Passthrough
translate called 412
voice translation-profile SIP_Passthrough_CallBlocking
translate called 422
voice translation-profile VM_Profile
translate called 2000
voice translation-profile XFER_TO_VM_PROFILE
translate redirect-called 2002
voice translation-profile nondialable
translate called 1000
voice-card 0
dspfarm
dsp services dspfarm
fax interface-type fax-mail
license udi pid UC540W-BRI-K9 sn FGL163220SL
archive
log config
logging enable
logging size 600
hidekeys
username admin privilege 15 secret xxx
username xxx password 0 ""
username xxx password 0 ""
ip tftp source-interface Loopback0
bridge irb
interface Loopback0
description $FW_INSIDE$
ip address 10.1.10.2 255.255.255.252
ip access-group 101 in
ip nat inside
ip virtual-reassembly in
interface FastEthernet0/0
description $FW_OUTSIDE$
no ip address
ip inspect SDM_LOW out
ip virtual-reassembly in
ip verify unicast reverse-path
load-interval 30
shutdown
duplex auto
speed auto
interface Integrated-Service-Engine0/0
description cue is initialized with default IMAP group
ip unnumbered Loopback0
ip nat inside
ip virtual-reassembly in
service-module ip address 10.1.10.1 255.255.255.252
service-module ip default-gateway 10.1.10.2
interface FastEthernet0/1/0
no ip address
macro description cisco-desktop
spanning-tree portfast
interface FastEthernet0/1/1
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/2
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/3
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/4
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/5
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/6
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/7
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/8
no ip address
macro description cisco-desktop
spanning-tree portfast
interface BRI0/1/0
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn sending-complete
isdn static-tei 0
interface BRI0/1/1
no ip address
shutdown
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn sending-complete
isdn static-tei 0
interface Dot11Radio0/5/0
no ip address
ssid cisco-data
ssid cisco-voice
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
antenna receive right
antenna transmit right
interface Dot11Radio0/5/0.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio0/5/0.100
encapsulation dot1Q 100
bridge-group 100
bridge-group 100 subscriber-loop-control
bridge-group 100 spanning-disabled
bridge-group 100 block-unknown-source
no bridge-group 100 source-learning
no bridge-group 100 unicast-flooding
interface Vlan1
no ip address
bridge-group 1
bridge-group 1 spanning-disabled
interface Vlan100
no ip address
bridge-group 100
bridge-group 100 spanning-disabled
interface BVI1
description $FW_INSIDE$
ip address 192.168.10.2 255.255.255.0
ip access-group 102 in
ip nat inside
ip virtual-reassembly in
interface BVI100
description $FW_INSIDE$
ip address 10.1.1.1 255.255.255.0
ip access-group 103 in
ip nat inside
ip virtual-reassembly in
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http path flash:/gui
ip dns server
ip nat inside source list 1 interface FastEthernet0/0 overload
ip route 0.0.0.0 0.0.0.0 192.168.10.1
ip route 10.1.10.1 255.255.255.255 Integrated-Service-Engine0/0
access-list 1 remark SDM_ACL Category=2
access-list 1 permit 10.1.1.0 0.0.0.255
access-list 1 permit 192.168.10.0 0.0.0.255
access-list 1 permit 10.1.10.0 0.0.0.3
access-list 2 remark CCA_SIP_SOURCE_GROUP_ACL_INTERNAL
access-list 2 remark SDM_ACL Category=1
access-list 2 permit 192.168.10.2
access-list 2 permit 10.1.10.0 0.0.0.3
access-list 2 permit 192.168.10.0 0.0.0.255
access-list 2 permit 10.1.1.0 0.0.0.255
access-list 3 remark CCA_SIP_SOURCE_GROUP_ACL_EXTERNAL
access-list 3 remark SDM_ACL Category=1
access-list 3 permit 212.147.47.216
access-list 3 deny any
access-list 100 remark auto generated by SDM firewall configuration
access-list 100 remark SDM_ACL Category=1
access-list 100 deny ip 192.168.10.0 0.0.0.255 any
access-list 100 deny ip host 255.255.255.255 any
access-list 100 deny ip 127.0.0.0 0.255.255.255 any
access-list 100 permit ip any any
access-list 101 remark auto generated by SDM firewall configuration##NO_ACES_8##
access-list 101 remark SDM_ACL Category=1
access-list 101 permit tcp 10.1.1.0 0.0.0.255 eq 2000 any
access-list 101 permit udp 10.1.1.0 0.0.0.255 eq 2000 any
access-list 101 deny ip 10.1.1.0 0.0.0.255 any
access-list 101 deny ip 192.168.10.0 0.0.0.255 any
access-list 101 deny ip 192.168.1.0 0.0.0.255 any
access-list 101 deny ip host 255.255.255.255 any
access-list 101 deny ip 127.0.0.0 0.255.255.255 any
access-list 101 permit ip any any
access-list 102 remark auto generated by SDM firewall configuration##NO_ACES_6##
access-list 102 remark SDM_ACL Category=1
access-list 102 deny ip 10.1.10.0 0.0.0.3 any
access-list 102 deny ip 10.1.1.0 0.0.0.255 any
access-list 102 deny ip 192.168.1.0 0.0.0.255 any
access-list 102 deny ip host 255.255.255.255 any
access-list 102 deny ip 127.0.0.0 0.255.255.255 any
access-list 102 permit ip any any
access-list 103 remark auto generated by SDM firewall configuration##NO_ACES_8##
access-list 103 remark SDM_ACL Category=1
access-list 103 permit tcp 10.1.10.0 0.0.0.3 any eq 2000
access-list 103 permit udp 10.1.10.0 0.0.0.3 any eq 2000
access-list 103 deny ip 10.1.10.0 0.0.0.3 any
access-list 103 deny ip 192.168.10.0 0.0.0.255 any
access-list 103 deny ip 192.168.1.0 0.0.0.255 any
access-list 103 deny ip host 255.255.255.255 any
access-list 103 deny ip 127.0.0.0 0.255.255.255 any
access-list 103 permit ip any any
access-list 104 remark auto generated by SDM firewall configuration##NO_ACES_14##
access-list 104 remark SDM_ACL Category=1
access-list 104 deny ip 10.1.10.0 0.0.0.3 any
access-list 104 deny ip 10.1.1.0 0.0.0.255 any
access-list 104 permit ip any any
access-list 104 permit udp host 8.8.8.8 eq domain any
access-list 104 permit icmp any any echo-reply
access-list 104 permit icmp any any time-exceeded
access-list 104 permit icmp any any unreachable
access-list 104 deny ip 10.0.0.0 0.255.255.255 any
access-list 104 deny ip 172.16.0.0 0.15.255.255 any
access-list 104 deny ip 192.168.0.0 0.0.255.255 any
access-list 104 deny ip 127.0.0.0 0.255.255.255 any
access-list 104 deny ip host 255.255.255.255 any
access-list 104 deny ip host 0.0.0.0 any
access-list 104 deny ip any any
control-plane
bridge 1 route ip
bridge 100 route ip
voice-port 0/0/0
cptone CH
station-id name FAX
station-id number 99
caller-id enable
voice-port 0/0/1
cptone CH
shutdown
caller-id enable
voice-port 0/0/2
cptone CH
shutdown
caller-id enable
voice-port 0/0/3
cptone CH
shutdown
caller-id enable
voice-port 0/1/0
compand-type a-law
cptone CH
bearer-cap Speech
voice-port 0/1/1
compand-type a-law
cptone CH
bearer-cap Speech
voice-port 0/4/0
auto-cut-through
signal immediate
input gain auto-control -15
description Music On Hold Port
sccp local Loopback0
sccp ccm 10.1.1.1 identifier 1 version 4.0
sccp
sccp ccm group 1
associate ccm 1 priority 1
associate profile 2 register mtpa4934c6ee4e0
dspfarm profile 2 transcode
description CCA transcoding for SIP Trunk VTX
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
maximum sessions 10
associate application SCCP
dial-peer cor custom
name internal
name local
name local-plus
name international
name national
name national-plus
name emergency
name toll-free
dial-peer cor list call-internal
member internal
dial-peer cor list call-local
member local
dial-peer cor list call-local-plus
member local-plus
dial-peer cor list call-national
member national
dial-peer cor list call-national-plus
member national-plus
dial-peer cor list call-international
member international
dial-peer cor list call-emergency
member emergency
dial-peer cor list call-toll-free
member toll-free
dial-peer cor list user-internal
member internal
member emergency
dial-peer cor list user-local
member internal
member local
member emergency
member toll-free
dial-peer cor list user-local-plus
member internal
member local
member local-plus
member emergency
member toll-free
dial-peer cor list user-national
member internal
member local
member local-plus
member national
member emergency
member toll-free
dial-peer cor list user-national-plus
member internal
member local
member local-plus
member national
member national-plus
member emergency
member toll-free
dial-peer cor list user-international
member internal
member local
member local-plus
member international
member national
member national-plus
member emergency
member toll-free
dial-peer voice 1 pots
destination-pattern 99
port 0/0/0
no sip-register
dial-peer voice 2 pots
port 0/0/1
no sip-register
dial-peer voice 3 pots
port 0/0/2
no sip-register
dial-peer voice 4 pots
port 0/0/3
no sip-register
dial-peer voice 5 pots
description ** MOH Port **
destination-pattern ABC
port 0/4/0
no sip-register
dial-peer voice 6 pots
description tcatch all dial peer for BRI/PRIv
translation-profile incoming nondialable
incoming called-number .%
direct-inward-dial
dial-peer voice 50 pots
description ** incoming dial peer **
incoming called-number ^AAAA$
direct-inward-dial
port 0/1/0
dial-peer voice 51 pots
description ** incoming dial peer **
incoming called-number ^AAAA$
direct-inward-dial
port 0/1/1
dial-peer voice 2000 voip
description ** cue voicemail pilot number **
translation-profile outgoing XFER_TO_VM_PROFILE
destination-pattern 98
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 2001 voip
description ** cue auto attendant number **
translation-profile outgoing PSTN_CallForwarding
destination-pattern 97
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 2012 voip
description ** cue prompt manager number **
translation-profile outgoing PSTN_CallForwarding
destination-pattern 96
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 1000 voip
permission term
description ** Incoming call from SIP trunk (VTX) **
session protocol sipv2
session target sip-server
incoming called-number .%
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
fax rate 14400
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback pass-through g711ulaw
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1001 voip
corlist outgoing call-local
description ** star code to SIP trunk (VTX) **
destination-pattern *..
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
fax rate 14400
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback pass-through g711ulaw
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1003 voip
description ** Passthrough Inbound Calls for PSTN from CUE **
translation-profile incoming SIP_Passthrough
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
incoming called-number ABCDT
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 1005 voip
description ** Passthrough Inbound Calls for MWI from CUE **
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
incoming called-number A80T
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 1009 voip
description ** Passthrough Inbound Calls for Internal Extensions from CUE **
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
incoming called-number ^..$
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 1033 voip
corlist outgoing call-local
description **CCA*Switzerland*Short Code Services**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 0187
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1042 voip
corlist outgoing call-emergency
description **CCA*Switzerland*Ambulance / Poisioning**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 0014[45]
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1041 voip
corlist outgoing call-emergency
description **CCA*Switzerland*REGA Air Rescue**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 00333333333
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1025 voip
corlist outgoing call-national
description **CCA*Switzerland*National Destination Numbers**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00[789]1.......
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1020 voip
corlist outgoing call-national
description **CCA*Switzerland*Regional Announcement VM**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 01600
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1040 voip
corlist outgoing call-emergency
description **CCA*Switzerland*REGA Air Rescue**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 000333333333
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1043 voip
corlist outgoing call-emergency
description **CCA*Switzerland*Ambulance / Poisioning**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 014[45]
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1035 voip
corlist outgoing call-national
description **CCA*Switzerland*Mobile Numbers**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 007[46789].......
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1024 voip
corlist outgoing call-national-plus
description **CCA*Switzerland*Personal Numbering**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00878......
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1029 voip
corlist outgoing call-national
description **CCA*Switzerland*Voicemail Access**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00860.........
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1036 voip
corlist outgoing call-national
description **CCA*Switzerland*VPN Access**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00869.............
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1027 voip
corlist outgoing call-national-plus
description **CCA*Switzerland*Premium Rate (Business)**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00900......
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1026 voip
corlist outgoing call-national
description **CCA*Switzerland*Test Numbers**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00868T
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1034 voip
corlist outgoing call-national-plus
description **CCA*Switzerland*Shared Cost numbers**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 0084[0248]......
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1038 voip
corlist outgoing call-emergency
description **CCA*Switzerland*Emergency**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 0011[278]
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1037 voip
corlist outgoing call-toll-free
description **CCA*Switzerland*Toll Free Numbers**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00800......
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1039 voip
corlist outgoing call-emergency
description **CCA*Switzerland*Emergency**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 011[278]
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1032 voip
corlist outgoing call-national
description **CCA*Switzerland*National Destination Numbers**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00[23456]........
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1023 voip
corlist outgoing call-international
description **CCA*Switzerland*International Calls**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 000T
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1031 voip
description **CCA*Switzerland*Premium Rate (Social)**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 0090[16]......
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1030 voip
corlist outgoing call-national
description **CCA*Switzerland*Short Code**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 014[0357]
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1045 voip
corlist outgoing call-emergency
description **CCA*Switzerland*REGA/Glaciers Air Rescue**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 0141[45]
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1028 voip
corlist outgoing call-national-plus
description **CCA*Switzerland*Directory Enquiries**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 018[15].
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1021 voip
corlist outgoing call-national
description **CCA*Switzerland*Short Code**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 011[45].
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1022 voip
corlist outgoing call-national
description **CCA*Switzerland*Short Code Services**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 01[67].
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1044 voip
corlist outgoing call-emergency
description **CCA*Switzerland*REGA/Glaciers Air Rescue**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 00141[45]
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 2002 voip
description ** cue voicemail PSTN number **
translation-profile outgoing VM_Profile
destination-pattern xxx$
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 2003 voip
description ** cue auto attendant PSTN number **
translation-profile outgoing AA_Profile
destination-pattern xxx$
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 1110 pots
preference 9
destination-pattern xxx
port 0/0/0
no sip-register
dial-peer voice 3006 voip
description SIP
translation-profile incoming SIP_Called_9
session protocol sipv2
session target sip-server
incoming called-number xxx.
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
no dial-peer outbound status-check pots
sip-ua
keepalive target dns:site1.365873.trk.ipvoip.ch
authentication username xxx password 7 xxx
no remote-party-id
retry invite 2
retry register 10
timers connect 100
timers keepalive active 100
registrar dns:site1.365873.trk.ipvoip.ch expires 3600
sip-server dns:site1.365873.trk.ipvoip.ch
host-registrar
telephony-service
sdspfarm units 5
sdspfarm transcode sessions 10
sdspfarm tag 2 mtpa4934c6ee4e0
video
fxo hook-flash
max-ephones 40
max-dn 300
ip source-address 10.1.1.1 port 2000
auto assign 1 to 1 type bri
calling-number initiator
service phone videoCapability 1
service phone ehookenable 1
service phone ehookEnable 1
service dnis overlay
service dnis dir-lookup
service dss
timeouts interdigit 5
system message SwissT.Net
url services http://10.1.10.1/voiceview/common/login.do
url authentication http://10.1.10.1/voiceview/authentication/authenticate.do
cnf-file location flash:
cnf-file perphone
user-locale U4 load CME-locale-de_DE-German-8.1.2.2.tar
network-locale U4
load 521G-524G cp524g-8-1-17
load 525G spa525g-7-5-4
load 501G spa50x-30x-7-5-2b
load 502G spa50x-30x-7-5-2b
load 504G spa50x-30x-7-5-2b
load 508G spa50x-30x-7-5-2b
load 509G spa50x-30x-7-5-2b
load 525G2 spa525g-7-5-4
load 301 spa50x-30x-7-5-2b
load 303 spa50x-30x-7-5-2b
time-zone 23
time-format 24
date-format dd-mm-yy
keepalive 30 auxiliary 4
voicemail 98
max-conferences 8 gain -6
call-forward pattern .T
call-forward system redirecting-expanded
hunt-group logout HLog
moh flash:/media/music-on-hold.au
multicast moh 239.10.16.16 port 2000
web admin system name cisco secret 5 xxx
dn-webedit
time-webedit
transfer-system full-consult dss
transfer-pattern .T
transfer-pattern 0.T
transfer-pattern 6.. blind
secondary-dialtone 0
night-service day Sun 17:00 09:00
night-service day Mon 17:00 09:00
night-service day Tue 17:00 09:00
night-service day Wed 17:00 09:00
night-service day Thu 17:00 09:00
night-service day Fri 17:00 09:00
night-service day Sat 17:00 09:00
fac standard
create cnf-files version-stamp Jan 01 2002 00:00:00
ephone-template 1
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
service phone webAccess 0
softkeys remote-in-use Newcall
softkeys idle Redial Pickup Mobility Newcall Cfwdall Gpickup Dnd Login
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Hold Endcall Trnsfer Mobility TrnsfVM Confrn Acct Park
button-layout 7931 2
ephone-template 15
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
softkeys remote-in-use Newcall
softkeys idle Redial Newcall Mobility Cfwdall Pickup Gpickup Dnd Login
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Hold Endcall Mobility Trnsfer TrnsfVM Confrn Acct Park
button-layout 7931 2
ephone-template 16
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
softkeys remote-in-use Newcall
softkeys idle Redial Newcall Mobility Cfwdall Pickup Gpickup Dnd Login
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Hold Endcall Mobility Trnsfer TrnsfVM Confrn Acct Park
ephone-template 17
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
softkeys remote-in-use CBarge Newcall
softkeys idle Redial Newcall Mobility Cfwdall Pickup Gpickup Dnd Login
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Hold Endcall Mobility Trnsfer TrnsfVM Confrn Acct Park
ephone-template 18
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
softkeys remote-in-use CBarge Newcall
softkeys idle Redial Newcall Mobility Cfwdall Pickup Gpickup Dnd Login
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Hold Endcall Mobility Trnsfer TrnsfVM Confrn Acct Park
button-layout 7931 2
ephone-dn 9
number BCD no-reg primary
description MoH
moh out-call ABC
ephone-dn 292
number xxx
description SIP Main Number registration
preference 10
ephone-dn 293 dual-line
number 90 secondary xxx no-reg both
label Zentrale
description 90
name Zentrale
call-forward busy 98
call-forward noan 98 timeout 20
ephone-dn 294 dual-line
number 94 secondary xxx no-reg both
label LL
description Lehrling Lehrnende
name Lehrling Lehrnende
mobility
snr xxx delay 1 timeout 30 cfwd-noan 98
snr ring-stop
call-forward busy 98
call-forward noan 98 timeout 20
ephone-dn 295 dual-line
number 93 secondary xxx no-reg both
label CM
description
name
snr xxx delay 1 timeout 30 cfwd-noan 98
snr ring-stop
call-forward busy 98
call-forward noan 98 timeout 10
ephone-dn 296 dual-line
number 92 secondary xxx no-reg both
label EE
description
name
mobility
call-forward busy 98
call-forward noan 98 timeout 20
ephone-dn 297 dual-line
number 91 secondary xxx no-reg both
label RS
description
name
mobility
snr xxx delay 1 timeout 30 cfwd-noan 98
snr ring-stop
call-forward busy 98
call-forward noan 98 timeout 10
ephone-dn 298
number 6.. no-reg primary
description ***CCA XFER TO VM EXTENSION***
call-forward all 98
ephone-dn 299
number A801.. no-reg primary
mwi off
ephone-dn 300
number A800.. no-reg primary
mwi on
ephone 1
device-security-mode none
mac-address A44C.11A0.B648
ephone-template 1
max-calls-per-button 2
username "xxx" password xxx
type 525G2
button 1:296 2:293 3m297 4m295
button 5m294
ephone 2
device-security-mode none
mac-address A44C.11A0.B566
ephone-template 1
max-calls-per-button 2
username "xxx" password xxx
type 525G2
button 1:297 2:293 3m296 4m295
button 5m294
ephone 3
device-security-mode none
mac-address A44C.11A0.B5C4
ephone-template 1
max-calls-per-button 2
username "xxx" password xxx
type 525G2
button 1:295 2:293 3m297 4m296
button 5m294
ephone 4
device-security-mode none
mac-address A44C.11A0.B67A
ephone-template 1
max-calls-per-button 2
username "xxx" password xxx
type 525G2
button 1:294 2:293 3m297 4m296
button 5m295
alias exec cca_voice_mode PBX
alias exec cca_vm_notification schedule from_time=00 to_time=24
alias exec clid-ALL_BRI ;1:0-4;1:0-9;1:0-9;1:1-9
alias exec clid-SIP ;1:1-9;1:1-9;1:1-9
banner login ^CCisco Configuration Assistant. Version: 3.2 (3). Fri Jul 04 13:18:33 CEST 2014^C
line con 0
no modem enable
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
line vty 0 4
transport preferred none
transport input all
line vty 5 100
transport preferred none
transport input all
ntp master
ntp server 91.240.0.5 prefer
enHi Patrick
I am working on this one as well. I have a UC560 with SIP Trunk provider Les.NET.
It was working fine until a few weeks ago when something changed on the provider end and broke it. My hunch it is something to do with the SIP REFER.
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-manager-express/91535-cme-sip-trunking-config.html
Here is an excerpt from the above page:
Call Transfer
When a call comes in on an SIP trunk to an SCCP Phone or CUE AutoAttendant (AA) and is transferred, the CME by default will send a SIP REFER message to the SP proxy. Most SP Proxy Servers do not support the REFER method. This needs to be configured in order to force the CME to hairpin the call:
Router(config)#voice service voip
Router(conf-voi-serv)#no supplementary-service sip refer
Figure 3 shows the behavior of the CME system with the REFER method disabled. -
Hi All,
We have a UC520 and the system is giving us an engaged tone when ever we dial voice mail from both our external and internal numbers. I have been going over and over the config and can not understand why we are getting an engaged signal when ever we ring voice mail. Below is the show run off the UC520, hopefully someone can spot some errors in it to suggest why it does not work as im close to hitting it with a large hammer
version 12.4
parser config cache interface
no service pad
no service timestamps debug uptime
service timestamps log datetime msec
service password-encryption
service internal
service compress-config
service sequence-numbers
hostname UC_520
boot-start-marker
boot system flash uc500-advipservicesk9-mz.124-22.YB4.bin
boot-end-marker
logging message-counter syslog
no logging buffered
no logging rate-limit
enable secret 5 passremoved
aaa new-model
aaa authentication login default local
aaa authentication login Foxtrot_sdm_easyvpn_xauth_ml_1 local
aaa authorization exec default local
aaa authorization network Foxtrot_sdm_easyvpn_group_ml_1 local
aaa session-id common
clock timezone AEST 10
clock summer-time AEST recurring 1 Sun Oct 2:00 1 Sun Apr 3:00
crypto pki trustpoint TP-self-signed-1974105750
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1974105750
revocation-check none
rsakeypair TP-self-signed-1974105750
dot11 syslog
ip source-route
ip cef
ip dhcp relay information trust-all
ip dhcp excluded-address 10.1.1.1 10.1.1.9
ip dhcp excluded-address 10.1.1.241 10.1.1.255
ip dhcp pool phone
network 10.1.1.0 255.255.255.0
default-router 10.1.1.1
option 150 ip 10.1.1.1
ip inspect name SDM_LOW cuseeme
ip inspect name SDM_LOW dns
ip inspect name SDM_LOW ftp
ip inspect name SDM_LOW h323
ip inspect name SDM_LOW https
ip inspect name SDM_LOW icmp
ip inspect name SDM_LOW imap
ip inspect name SDM_LOW pop3
ip inspect name SDM_LOW netshow
ip inspect name SDM_LOW rcmd
ip inspect name SDM_LOW realaudio
ip inspect name SDM_LOW rtsp
ip inspect name SDM_LOW esmtp
ip inspect name SDM_LOW sqlnet
ip inspect name SDM_LOW streamworks
ip inspect name SDM_LOW tftp
ip inspect name SDM_LOW tcp router-traffic
ip inspect name SDM_LOW udp
ip inspect name SDM_LOW vdolive
no ipv6 cef
stcapp ccm-group 1
stcapp
stcapp feature access-code
multilink bundle-name authenticated
vpdn enable
vpdn-group 1
! Default PPTP VPDN group
accept-dialin
protocol pptp
virtual-template 2
trunk group ALL_FXO
max-retry 5
voice-class cause-code 1
hunt-scheme sequential
voice call send-alert
voice rtp send-recv
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
sip
no update-callerid
call service stop
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g729r8
voice class dualtone-detect-params 1
cadence-variation 25
voice class custom-cptone OZ
dualtone disconnect
frequency 420
cadence 400 200
voice class custom-cptone test
dualtone disconnect
frequency 425
cadence 375 375
voice class cause-code 1
no-circuit
voice register global
max-dn 128
max-pool 32
voice hunt-group 1 parallel
final 512
list 203,204
timeout 10
pilot 511
voice hunt-group 2 parallel
final 513
list 202,203,204
timeout 10
pilot 512
voice hunt-group 3 parallel
final 203
list 201,202,203,204
timeout 10
pilot 513
voice translation-rule 4
rule 15 // //
voice translation-rule 1111
voice translation-rule 1112
rule 1 /^0/ //
voice translation-rule 2000
rule 1 /0294174218/ /101/
voice translation-rule 2002
rule 1 // //
voice translation-rule 2222
voice translation-profile CALLER_ID_TRANSLATION_PROFILE
translate calling 1111
voice translation-profile CallBlocking
translate called 2222
voice translation-profile OUTGOING_TRANSLATION_PROFILE
translate called 1112
voice translation-profile PROFILE_ALL_FXO
translate calling 4
voice translation-profile VM_Profile
translate called 2000
voice translation-profile XFER_TO_VM_PROFILE
translate called 2002
voice-card 0
no local-bypass
username admin privilege 15 secret 5 passremoved
username KeyVPN secret 5 passremoved
username cisco privilege 15 secret 5 passremoved
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
crypto isakmp client configuration group EZVPN_GROUP_1
key passremoved
dns 61.8.0.113
pool SDM_POOL_1
save-password
max-users 10
crypto isakmp profile sdm-ike-profile-1
match identity group EZVPN_GROUP_1
client authentication list Foxtrot_sdm_easyvpn_xauth_ml_1
isakmp authorization list Foxtrot_sdm_easyvpn_group_ml_1
client configuration address respond
virtual-template 1
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec profile SDM_Profile1
set transform-set ESP-3DES-SHA
set isakmp-profile sdm-ike-profile-1
archive
log config
logging enable
logging size 600
hidekeys
process-max-time 50
ip tftp source-interface Loopback0
class-map match-all L3-to-L2_VoIP-Cntrl
match ip dscp af31
class-map match-all L3-to-L2_VoIP-RTP
match ip dscp ef
class-map match-all SIP
match protocol sip
class-map match-all RTP
match protocol rtp
policy-map EthOut
class RTP
policy-map output-L3-to-L2
class L3-to-L2_VoIP-RTP
set cos 5
class L3-to-L2_VoIP-Cntrl
set cos 3
interface Loopback0
description $FW_INSIDE$
ip address 10.1.10.2 255.255.255.252
ip access-group 101 in
ip nat inside
ip virtual-reassembly
interface FastEthernet0/0
description $ETH-WAN$
no ip address
ip verify unicast reverse-path
ip virtual-reassembly
duplex auto
speed auto
snmp trap ip verify drop-rate
pppoe enable group global
pppoe-client dial-pool-number 1
interface Integrated-Service-Engine0/0
description cue is initialized with default IMAP group
ip unnumbered Loopback0
ip nat inside
ip virtual-reassembly
service-module ip address 10.1.10.1 255.255.255.252
service-module ip default-gateway 10.1.10.2
interface FastEthernet0/1/0
switchport mode trunk
macro description cisco-switch
interface FastEthernet0/1/1
switchport voice vlan 100
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/2
switchport voice vlan 100
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/3
switchport voice vlan 100
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/4
switchport voice vlan 100
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/5
switchport voice vlan 100
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/6
switchport voice vlan 100
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/7
switchport mode trunk
macro description cisco-switch
interface FastEthernet0/1/8
switchport mode trunk
macro description cisco-switch
interface Virtual-Template1 type tunnel
no ip address
tunnel mode ipsec ipv4
tunnel protection ipsec profile SDM_Profile1
interface Virtual-Template2
ip unnumbered Dialer0
peer default ip address pool SDM_POOL_1
no keepalive
ppp encrypt mppe auto
ppp authentication pap chap ms-chap
interface Vlan1
description $FW_INSIDE$
ip address 10.1.2.1 255.255.255.0
ip access-group 102 in
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1412
interface Vlan100
description $FW_INSIDE$
ip address 10.1.1.1 255.255.255.0
ip access-group 103 in
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1412
interface Dialer0
description $FW_OUTSIDE$
ip address negotiated
ip access-group test-ppt in
ip mtu 1452
ip nat outside
ip inspect SDM_LOW out
ip virtual-reassembly
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname passremoved
ppp chap password 7 passremoved
ppp pap sent-username passremoved password 7 passremoved
ppp ipcp dns request
interface BVI1
description $FW_INSIDE$
mtu 1514
no ip address
ip access-group 102 in
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1412
interface BVI100
description $FW_INSIDE$
mtu 1514
no ip address
ip access-group 103 in
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1412
ip local pool SDM_POOL_1 10.1.2.230 10.1.2.250
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer0
ip route 10.1.10.1 255.255.255.255 Integrated-Service-Engine0/0
ip route 172.0.0.0 255.0.0.0 10.1.2.2
ip http server
ip http authentication local
ip http secure-server
ip http path flash:/gui
ip nat inside source list 1 interface Dialer0 overload
ip access-list extended test-pptp
permit tcp any any eq 1723
permit gre any any
access-list 1 remark SDM_ACL Category=2
access-list 1 permit 10.1.1.0 0.0.0.255
access-list 1 permit 10.1.2.0 0.0.0.255
access-list 1 permit 10.1.10.0 0.0.0.3
access-list 100 remark auto generated by SDM firewall configuration
access-list 100 remark SDM_ACL Category=1
access-list 100 deny ip 192.168.10.0 0.0.0.255 any
access-list 100 deny ip host 255.255.255.255 any
access-list 100 deny ip 127.0.0.0 0.255.255.255 any
access-list 100 permit ip any any
access-list 101 remark auto generated by SDM firewall configuration##NO_ACES_7##
access-list 101 remark SDM_ACL Category=1
access-list 101 permit udp any host 10.1.10.2 eq non500-isakmp
access-list 101 permit udp any host 10.1.10.2 eq isakmp
access-list 101 permit esp any host 10.1.10.2
access-list 101 permit ahp any host 10.1.10.2
access-list 101 permit tcp 10.1.1.0 0.0.0.255 eq 2000 any
access-list 101 permit udp 10.1.1.0 0.0.0.255 eq 2000 any
access-list 101 deny ip 10.1.2.0 0.0.0.255 any
access-list 101 deny ip 10.1.1.0 0.0.0.255 any
access-list 101 deny ip host 255.255.255.255 any
access-list 101 deny ip 127.0.0.0 0.255.255.255 any
access-list 101 permit ip any any
access-list 104 remark auto generated by SDM firewall configuration##NO_ACES_25##
access-list 104 remark SDM_ACL Category=1
access-list 104 permit udp any any eq non500-isakmp
access-list 104 permit udp any any eq isakmp
access-list 104 permit esp any any
access-list 104 permit ahp any any
access-list 104 permit tcp any any eq pop3 log
access-list 104 permit tcp any any eq 37777 log
access-list 104 permit tcp any any eq 3389 log
access-list 104 permit tcp any any eq 1723 log
access-list 104 permit tcp any any eq 2701 log
access-list 104 permit tcp any any eq 4899 log
access-list 104 permit tcp any any eq 4125 log
access-list 104 permit tcp any any eq 443 log
access-list 104 permit tcp any any eq smtp log
access-list 104 permit tcp any any eq 8080 log
access-list 104 permit tcp any any eq www log
access-list 104 deny ip 10.1.10.0 0.0.0.3 any
access-list 104 deny ip 10.1.2.0 0.0.0.255 any
access-list 104 deny ip 10.1.1.0 0.0.0.255 any
access-list 104 permit udp host 61.8.0.113 eq domain any
access-list 104 permit icmp any any echo-reply
access-list 104 permit icmp any any time-exceeded
access-list 104 permit icmp any any unreachable
access-list 104 deny ip 10.0.0.0 0.255.255.255 any
access-list 104 deny ip 172.16.0.0 0.15.255.255 any
access-list 104 deny ip 192.168.0.0 0.0.255.255 any
access-list 104 deny ip 127.0.0.0 0.255.255.255 any
access-list 104 deny ip host 255.255.255.255 any
access-list 104 deny ip host 0.0.0.0 any
access-list 104 deny ip any any log
access-list 104 permit gre any any
dialer-list 1 protocol ip permit
snmp-server community public RO
control-plane
voice-port 0/0/0
cptone AU
timeouts ringing infinity
voice-port 0/0/1
cptone AU
timeouts ringing infinity
voice-port 0/0/2
cptone AU
timeouts ringing infinity
voice-port 0/0/3
cptone AU
timeouts ringing infinity
voice-port 0/1/0
supervisory disconnect dualtone mid-call
supervisory custom-cptone OZ
supervisory dualtone-detect-params 1
no battery-reversal
compand-type a-law
timeouts call-disconnect 3
timeouts ringing infinity
timeouts wait-release 3
timing sup-disconnect 50
connection plar opx 501
description Configured by CCA 4 FXO-0/1/0-Custom-HG
caller-id enable
voice-port 0/1/1
supervisory disconnect dualtone mid-call
supervisory custom-cptone OZ
supervisory dualtone-detect-params 1
no battery-reversal
compand-type a-law
timeouts call-disconnect 3
timeouts ringing infinity
timeouts wait-release 3
timing sup-disconnect 50
connection plar opx 501
description Configured by CCA 4 FXO-0/1/1-Custom-HG
caller-id enable
voice-port 0/1/2
trunk-group ALL_FXO 60
supervisory disconnect dualtone mid-call
supervisory custom-cptone OZ
supervisory dualtone-detect-params 1
no battery-reversal
compand-type a-law
timeouts call-disconnect 3
timeouts ringing infinity
timeouts wait-release 3
timing sup-disconnect 50
connection plar opx 501
description Configured by CCA 4 FXO-0/1/2-Custom-HG
caller-id enable
voice-port 0/1/3
trunk-group ALL_FXO 64
supervisory disconnect dualtone mid-call
supervisory custom-cptone OZ
supervisory dualtone-detect-params 1
no battery-reversal
compand-type a-law
timeouts call-disconnect 3
timeouts ringing infinity
timeouts wait-release 3
timing sup-disconnect 50
connection plar opx 501
description Configured by CCA 4 FXO-0/1/3-Custom-HG
caller-id enable
voice-port 0/3/0
trunk-group ALL_FXO 62
supervisory disconnect dualtone mid-call
supervisory custom-cptone OZ
supervisory dualtone-detect-params 1
no battery-reversal
compand-type a-law
timeouts call-disconnect 3
timeouts ringing infinity
timeouts wait-release 3
timing sup-disconnect 50
connection plar opx 501
description Configured by CCA 4 FXO-0/3/0-Custom-HG
caller-id enable
voice-port 0/3/1
trunk-group ALL_FXO 61
supervisory disconnect dualtone mid-call
supervisory custom-cptone OZ
supervisory dualtone-detect-params 1
no battery-reversal
compand-type a-law
timeouts call-disconnect 3
timeouts ringing infinity
timeouts wait-release 3
timing sup-disconnect 50
connection plar opx 501
description Configured by CCA 4 FXO-0/3/1-Custom-HG
caller-id enable
voice-port 0/3/2
trunk-group ALL_FXO 64
supervisory disconnect dualtone mid-call
supervisory custom-cptone OZ
supervisory dualtone-detect-params 1
no battery-reversal
compand-type a-law
timeouts call-disconnect 3
timeouts ringing infinity
timeouts wait-release 3
timing sup-disconnect 50
connection plar opx 101
description Configured by CCA 4FXO-0/3/2-Custom-OP
caller-id enable
voice-port 0/3/3
supervisory disconnect dualtone mid-call
supervisory custom-cptone OZ
supervisory dualtone-detect-params 1
no battery-reversal
compand-type a-law
timeouts call-disconnect 3
timeouts ringing infinity
timeouts wait-release 3
timing sup-disconnect 50
connection plar opx 501
description Configured by CCA 4 FXO-0/3/3-Custom-HG
caller-id enable
voice-port 0/4/0
auto-cut-through
signal immediate
input gain auto-control -15
description Music On Hold Port
sccp local Loopback0
sccp ccm 10.1.1.1 identifier 1 version 3.1
sccp
sccp ccm group 1
associate ccm 1 priority 1
dial-peer cor custom
name internal
name local
name local-plus
name international
name national
name national-plus
name emergency
name toll-free
dial-peer cor list call-internal
member internal
dial-peer cor list call-local
member local
dial-peer cor list call-local-plus
member local-plus
dial-peer cor list call-national
member national
dial-peer cor list call-national-plus
member national-plus
dial-peer cor list call-international
member international
dial-peer cor list call-emergency
member emergency
dial-peer cor list call-toll-free
member toll-free
dial-peer cor list user-internal
member internal
member emergency
dial-peer cor list user-local
member internal
member local
member emergency
member toll-free
dial-peer cor list user-local-plus
member internal
member local
member local-plus
member emergency
member toll-free
dial-peer cor list user-national
member internal
member local
member local-plus
member national
member emergency
member toll-free
dial-peer cor list user-national-plus
member internal
member local
member local-plus
member national
member national-plus
member emergency
member toll-free
dial-peer cor list user-international
member internal
member local
member local-plus
member international
member national
member national-plus
member emergency
member toll-free
dial-peer voice 1 pots
service stcapp
port 0/0/0
dial-peer voice 2 pots
service stcapp
port 0/0/1
dial-peer voice 3 pots
service stcapp
port 0/0/2
dial-peer voice 4 pots
service stcapp
port 0/0/3
dial-peer voice 5 pots
description ** MOH Port **
destination-pattern ABC
port 0/4/0
no sip-register
dial-peer voice 50 pots
description ** incoming dial peer **
incoming called-number .%
port 0/1/0
dial-peer voice 51 pots
description ** incoming dial peer **
incoming called-number .%
port 0/1/1
dial-peer voice 52 pots
description ** incoming dial peer **
incoming called-number .%
port 0/1/2
dial-peer voice 53 pots
description ** incoming dial peer **
incoming called-number .%
port 0/1/3
dial-peer voice 150 pots
description ** incoming dial peer **
incoming called-number .%
port 0/3/0
dial-peer voice 151 pots
description ** incoming dial peer **
incoming called-number .%
port 0/3/1
dial-peer voice 152 pots
description ** incoming dial peer **
incoming called-number .%
port 0/3/2
dial-peer voice 153 pots
description ** incoming dial peer **
incoming called-number .%
port 0/3/3
dial-peer voice 54 pots
description ** FXO pots dial-peer **
destination-pattern A0
port 0/1/0
no sip-register
dial-peer voice 55 pots
description ** FXO pots dial-peer **
destination-pattern A1
port 0/1/1
no sip-register
dial-peer voice 56 pots
description ** FXO pots dial-peer **
destination-pattern A2
port 0/1/2
no sip-register
dial-peer voice 57 pots
description ** FXO pots dial-peer **
destination-pattern A3
port 0/1/3
no sip-register
dial-peer voice 154 pots
description ** FXO pots dial-peer **
destination-pattern A4
port 0/3/0
no sip-register
dial-peer voice 155 pots
description ** FXO pots dial-peer **
destination-pattern A5
port 0/3/1
no sip-register
dial-peer voice 156 pots
description ** FXO pots dial-peer **
destination-pattern A6
port 0/3/2
no sip-register
dial-peer voice 157 pots
description ** FXO pots dial-peer **
destination-pattern A7
port 0/3/3
no sip-register
dial-peer voice 2000 voip
description ** cue voicemail pilot number **
translation-profile outgoing XFER_TO_VM_PROFILE
destination-pattern 101
b2bua
voice-class sip outbound-proxy ipv4:10.1.10.1
session protocol sipv2
session target ipv4:10.1.10.1
dtmf-relay sip-notify
codec g711ulaw
no vad
dial-peer voice 58 pots
trunkgroup ALL_FXO
corlist outgoing call-emergency
description **CCA*Australia*Emergency Services**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0000
forward-digits all
no sip-register
dial-peer voice 59 pots
trunkgroup ALL_FXO
corlist outgoing call-emergency
description **CCA*Australia*Emergency Services**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 000
forward-digits all
no sip-register
dial-peer voice 60 pots
trunkgroup ALL_FXO
corlist outgoing call-emergency
description **CCA*Australia*Emergency TTY**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0106
forward-digits all
no sip-register
dial-peer voice 61 pots
trunkgroup ALL_FXO
corlist outgoing call-emergency
description **CCA*Australia*Emergency TTY**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 006
forward-digits all
no sip-register
dial-peer voice 62 pots
trunkgroup ALL_FXO
corlist outgoing call-international
description **CCA*Australia*International Access**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0001[1589]T
forward-digits all
no sip-register
dial-peer voice 63 pots
trunkgroup ALL_FXO
corlist outgoing call-international
description **CCA*Australia*Premium Services**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 00055T
forward-digits all
no sip-register
dial-peer voice 64 pots
trunkgroup ALL_FXO
corlist outgoing call-local-plus
description **CCA*Australia*Analogue AMPS service**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0014[04689].....
forward-digits all
no sip-register
dial-peer voice 65 pots
trunkgroup ALL_FXO
corlist outgoing call-local-plus
description **CCA*Australia*Analogue AMPS & Satellite**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0014[12357]......
forward-digits all
no sip-register
dial-peer voice 66 pots
trunkgroup ALL_FXO
corlist outgoing call-local-plus
description **CCA*Australia*Analogue AMPS service**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0015......
forward-digits all
no sip-register
dial-peer voice 67 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Australia*Paging Service**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 00160..
forward-digits all
no sip-register
dial-peer voice 68 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Australia*Paging Service**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0016[1236789].....
forward-digits all
no sip-register
dial-peer voice 69 pots
trunkgroup ALL_FXO
corlist outgoing call-local-plus
description **CCA*Australia*Analogue AMPS service**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0017[1289].....
forward-digits all
no sip-register
dial-peer voice 70 pots
trunkgroup ALL_FXO
corlist outgoing call-local-plus
description **CCA*Australia*Analogue AMPS service**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0018......
forward-digits all
no sip-register
dial-peer voice 71 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Australia*Data Network Access Service**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 00192.
forward-digits all
no sip-register
dial-peer voice 72 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Australia*Data Network Access Service**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 00198[01239].....
forward-digits all
no sip-register
dial-peer voice 73 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Australia*Data Network Access Service**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 00198[45678]
forward-digits all
no sip-register
dial-peer voice 74 pots
trunkgroup ALL_FXO
corlist outgoing call-national
description **CCA*Australia*NSW Numbers**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 002........
forward-digits all
no sip-register
dial-peer voice 75 pots
trunkgroup ALL_FXO
corlist outgoing call-national
description **CCA*Australia*VIC, TAS Numbers**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 003........
forward-digits all
no sip-register
dial-peer voice 76 pots
trunkgroup ALL_FXO
corlist outgoing call-local-plus
description **CCA*Australia*Digital Mobile Service**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 004........
forward-digits all
no sip-register
dial-peer voice 77 pots
trunkgroup ALL_FXO
corlist outgoing call-national
description **CCA*Australia*Universal Personal Comms Service**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 005........
forward-digits all
no sip-register
dial-peer voice 78 pots
trunkgroup ALL_FXO
corlist outgoing call-national
description **CCA*Australia*QLD Numbers**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 007........
forward-digits all
no sip-register
dial-peer voice 79 pots
trunkgroup ALL_FXO
corlist outgoing call-national
description **CCA*Australia*SA, WA, NT Numbers**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 008........
forward-digits all
no sip-register
dial-peer voice 80 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Australia*Community Service**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 01100
forward-digits all
no sip-register
dial-peer voice 81 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Australia*Community Service**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0110[1-9]..
forward-digits all
no sip-register
dial-peer voice 82 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Australia*Public Interest Service**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0113...
forward-digits all
no sip-register
dial-peer voice 83 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Australia*Mass Calling Service**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0114.....
forward-digits all
no sip-register
dial-peer voice 84 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Australia*Community Service**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0119.
forward-digits all
no sip-register
dial-peer voice 85 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Australia*Directory and Service Numbers**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0122[1235]
forward-digits all
no sip-register
dial-peer voice 86 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Australia*Directory and Operator Numbers**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0123[46]
forward-digits all
no sip-register
dial-peer voice 87 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Australia*Operator Service**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 012[45]T
forward-digits all
no sip-register
dial-peer voice 88 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Australia*Local Rate Numbers**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0130.......
forward-digits all
no sip-register
dial-peer voice 89 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Australia*Local Rate Numbers**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 013[1-9]...
forward-digits all
no sip-register
dial-peer voice 90 pots
trunkgroup ALL_FXO
corlist outgoing call-international
description **CCA*Australia*Carrier Preselection Codes**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 014[1-9]T
forward-digits all
no sip-register
dial-peer voice 91 pots
trunkgroup ALL_FXO
corlist outgoing call-toll-free
description **CCA*Australia*Freephone Numbers**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0180[01]......
forward-digits all
no sip-register
dial-peer voice 92 pots
trunkgroup ALL_FXO
corlist outgoing call-toll-free
description **CCA*Australia*Freephone Numbers**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0180[2-9]...
forward-digits all
no sip-register
dial-peer voice 93 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Australia*Universal PCS Profile Management**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0185..
forward-digits all
no sip-register
dial-peer voice 94 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*Australia*Calling Card Service**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0189..
forward-digits all
no sip-register
dial-peer voice 95 pots
trunkgroup ALL_FXO
corlist outgoing call-international
description **CCA*Australia*Premium Services**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0190[0126]......
forward-digits all
no sip-register
dial-peer voice 96 pots
trunkgroup ALL_FXO
corlist outgoing call-international
description **CCA*Australia*Premium Services**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 019[1345]...
forward-digits all
no sip-register
dial-peer voice 97 pots
trunkgroup ALL_FXO
corlist outgoing call-international
description **CCA*Australia*Premium Services**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 019[679].....
forward-digits all
no sip-register
dial-peer voice 98 pots
trunkgroup ALL_FXO
corlist outgoing call-national
description **CCA*Australia*8-digit dialing**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 0[2-9].......
forward-digits all
no sip-register
dial-peer voice 2002 voip
description ** cue voicemail PSTN number **
translation-profile outgoing VM_Profile
destination-pattern 0294174218$
b2bua
voice-class sip outbound-proxy ipv4:10.1.10.1
session protocol sipv2
session target ipv4:10.1.10.1
dtmf-relay sip-notify
codec g711ulaw
no vad
no dial-peer outbound status-check pots
sip-ua
no transport udp
no transport tcp tls
no transport tcp
telephony-service
video
em logout 0:0 0:0 0:0
fxo hook-flash
max-ephones 32
max-dn 128
ip source-address 10.1.1.1 port 2000
max-redirect 20
auto assign 10 to 43
auto assign 5 to 8 type anl
calling-number initiator
service phone videoCapability 1
service dnis overlay
service dnis dir-lookup
timeouts interdigit 5
system message
url services http://10.1.10.1/voiceview/common/login.do
url authentication http://10.1.10.1/voiceview/authentication/authenticate.do
cnf-file location flash:
network-locale GB
load 7915-12 B015-1-0-3
load 7915-24 B015-1-0-3
load 7942 SCCP42.8-4-2S
load 7962 SCCP42.8-4-2S
load 521G-524G cp524g-8-1-16b
time-zone 48
date-format dd-mm-yy
voicemail 101
max-conferences 8 gain -6
call-forward pattern .T
call-forward system redirecting-expanded
moh flash:/media/music-on-hold.au
multicast moh 239.10.16.16 port 2000
web admin system name cisco secret 5 passremoved
dn-webedit
time-webedit
transfer-system full-consult dss
transfer-pattern 9.T
transfer-pattern .T
transfer-pattern 0.T
transfer-pattern 6... blind
secondary-dialtone 0
after-hours pstn-prefix 4 3
night-service code *6483
night-service day Sun 19:01 08:15
night-service day Mon 19:01 08:15
night-service day Tue 19:01 08:15
night-service day Wed 19:01 08:15
night-service day Thu 19:01 08:15
night-service day Fri 19:01 19:00
night-service day Sat 19:01 19:00
create cnf-files version-stamp 7960 Feb 19 2010 13:12:05
ephone-template 15
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
softkeys idle Redial Newcall Cfwdall Pickup Gpickup Dnd Login
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Hold Endcall Trnsfer TrnsfVM Confrn Acct Park
button-layout 7931 2
ephone-template 16
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
softkeys idle Redial Gpickup Cfwdall Pickup Newcall Dnd
softkeys seized Cfwdall Gpickup Redial Pickup Endcall Callback
softkeys connected Hold Endcall Trnsfer TrnsfVM Confrn Acct Park
ephone-dn 1
number 701 no-reg primary
name IP-Paging1
paging ip 239.1.1.1 port 2000
ephone-dn 2
number 211
name name
call-forward busy 101
call-forward noan 101 timeout 10
hold-alert 30 originator
ephone-dn 5 dual-line
number 301 no-reg primary
label 301
description PhoneA Analog
name PhoneA Analog
ephone-dn 6 dual-line
number 302 no-reg primary
label 302
description PhoneB Analog
name PhoneB Analog
ephone-dn 7 dual-line
number 303 no-reg primary
label 303
description PhoneC Analog
name PhoneC Analog
ephone-dn 8 dual-line
number 304 no-reg primary
label 304
description PhoneD Analog
name PhoneD Analog
ephone-dn 9
number BCD no-reg primary
description MoH
moh out-call ABC
ephone-dn 10 dual-line
number 201 no-reg primary
pickup-group 1
label 201
description Dragan Jancic
name name
call-forward busy 101
call-forward noan 101 timeout 35
ephone-dn 11 dual-line
number 202 no-reg primary
pickup-group 1
label 202
description Spare 2
name Spare 2
call-forward busy 101
call-forward noan 101 timeout 35
ephone-dn 12 dual-line
number 203 no-reg primary
pickup-group 1
label 203
description name
name name
call-forward busy 101
call-forward night-service 00458707335
call-forward noan 101 timeout 35
night-service bell
ephone-dn 13 dual-line
number 204 no-reg primary
pickup-group 1
label 204
description name
name name
call-forward busy 101
call-forward noan 101 timeout 35
ephone-dn 14 dual-line
number 207 no-reg primary
label 207
description name
name name
call-forward busy 101
call-forward noan 101 timeout 35
ephone-dn 15 dual-line
number 206 no-reg primary
label 206
description name
name name
call-forward busy 101
call-forward noan 101 timeout 35
ephone-dn 16 dual-line
number 205 no-reg primary
pickup-group 1
label 205
description name
name name
call-forward busy 101
call-forward noan 101 timeout 10
ephone-dn 17 dual-line
number 208 no-reg primary
label 208
description name
name name
call-forward busy 101
call-forward noan 101 timeout 35
ephone-dn 18 dual-line
number 209 no-reg primary
label 209
description Spare
name Spare
call-forward busy 101
call-forward noan 101 timeout 10
ephone-dn 19 dual-line
number 210 no-reg primary
label 210
description name
name name
call-forward busy 101
call-forward noan 101 timeout 35
ephone-dn 21 dual-line
number 212 no-reg primary
label 212
description name
name name
call-forward busy 101
call-forward noan 101 timeout 35
ephone-dn 22 dual-line
number 213 no-reg primary
label 213
description name
name name
call-forward busy 101
call-forward noan 101 timeout 35
ephone-dn 23 dual-line
number 214 no-reg primary
label 214
description name
name name
call-forward busy 101
call-forward noan 101 timeout 35
ephone-dn 24 dual-line
number 215 no-reg primary
label 215
description Workshop One
name Workshop One
call-forward busy 101
call-forward noan 101 timeout 35
ephone-dn 25 dual-line
number 216 no-reg primary
label 216
description Workshop Two
name Workshop Two
call-forward busy 101
call-forward noan 101 timeout 35
ephone-dn 26 dual-line
number 217 no-reg primary
label 217
description Lunch Room
name Lunch Room
call-forward busy 203
call-forward noan 203 timeout 35
ephone-dn 27 dual-line
number 218 no-reg primary
label 218
description Meeting Room
name Meeting Room
call-forward busy 203
call-forward noan 203 timeout 35
ephone-dn 126
number 6... no-reg primary
description ***CCA XFER TO VM EXTENSION***
call-forward all 101
ephone-dn 127
number A801... no-reg primary
mwi off
ephone-dn 128
number A800... no-reg primary
mwi on
ephone 1
device-security-mode none
video
mac-address 0021.1BFC.ACA5
ephone-template 16
max-calls-per-button 2
username "name" password 12345
type 524G
button 1:21
ephone 2
device-security-mode none
mac-address 1A02.A8FE.0000
ephone-template 16
max-calls-per-button 2
username "a1"
type anl
button 1:5
ephone 3
device-security-mode none
mac-address 1A02.A8FE.0001
ephone-template 16
max-calls-per-button 2
username "b1"
type anl
button 1:6
ephone 4
device-security-mode none
mac-address 1A02.A8FE.0002
ephone-template 16
max-calls-per-button 2
username "c1"
type anl
button 1:7
ephone 5
device-security-mode none
mac-address 1A02.A8FE.0003
ephone-template 16
max-calls-per-button 2
username "d1"
type anl
button 1:8
ephone 6
device-security-mode none
video
mac-address 0024.C40C.C2DC
ephone-template 16
username "name" password nqz82887
type 7962 addon 1 7915-12
button 1:13 2m10 3m11 4m12
button 5m16 6m15 7m14 8m17
button 9m18 10m19 12m21 13m22
button 14m23 15m24 16m25 17m26
button 18m27
ephone 7
device-security-mode none
video
mac-address 0021.1BFC.A81C
ephone-template 16
max-calls-per-button 2
username "meetingroom" password 12345
paging-dn 1
type 524G
button 1:27
ephone 8
device-security-mode none
video
mac-address 0021.1BFC.A801
ephone-template 16
max-calls-per-button 2
username "workshopone" password 12345
paging-dn 1
type 524G
button 1:24
ephone 9
device-security-mode none
video
mac-address 0021.1BFC.A81D
ephone-template 16
max-calls-per-button 2
username "name" password 12345
paging-dn 1
type 524G
button 1:22
ephone 10
device-security-mode none
video
mac-address 0021.1BFC.A822
ephone-template 16
max-calls-per-button 2
username "lunchroom" password 12345
paging-dn 1
type 524G
button 1:26
ephone 11
device-security-mode none
video
mac-address 0021.1BFC.ACA6
ephone-template 16
max-calls-per-button 2
username "name" password 12345
type 524G
button 1:15
ephone 12
device-security-mode none
video
mac-address 0021.1BFC.A800
max-calls-per-button 2
username "name" password lpw29837
type 524G
button 1:23
ephone 13
device-security-mode none
video
mac-address 0021.1BFC.A9B6
max-calls-per-button 2
type 524G
button 1:11
ephone 14
device-security-mode none
video
mac-address 0021.1BFC.A820
ephone-template 16
max-calls-per-button 2
username "name" password 12345
paging-dn 1
type 524G
button 1:17
ephone 15
device-security-mode none
video
mac-address 0021.1BFC.A824
ephone-template 16
max-calls-per-button 2
username "name" password 12345
paging-dn 1
type 524G
button 1:19
ephone 16
device-security-mode none
video
mac-address 0021.1BFC.ACA3
ephone-template 16
max-calls-per-button 2
username "workshoptwo" password 12345
paging-dn 1
type 524G
button 1:25
ephone 17
device-security-mode none
video
mac-address 0024.C40D.34A0
ephone-template 16
username "name" password 12345
type 7962 addon 1 7915-12
button 1:12 2m10 3m11 4m13
button 5m16 6m15 7m14 8m17
button 9m18 10m19 12m21 13m22
button 14m23 15m24 16m25 17m26
button 18m27
ephone 18
device-security-mode none
video
mac-address 0026.0B5D.68B7
username "name" password xiz65240
type 7962
button 1:2 2m10 3m12 4m13
button 5m22 6m24
ephone 19
device-security-mode none
video
mac-address 0026.0B5C.F949
ephone-template 16
username "name" password dqq75357
type 7962
button 1:10 2m11 3m12 4m13
button 5m23 6m24
ephone 20
device-security-mode none
mac-address 52CE.B390.0000
max-calls-per-button 2
type anl
ephone 21
device-security-mode none
video
mac-address 0021.1BFC.A803
ephone-template 16
max-calls-per-button 2
username "name"
paging-dn 1
type 524G
button 1:14 2m11 3m12 4m13
ephone 22
device-security-mode none
video
mac-address 0021.1BFC.A806
ephone-template 16
max-calls-per-button 2
username "name" password 12345
type 524G
button 1:18
ephone 23
device-security-mode none
video
mac-address 0021.1BFC.ACA7
ephone-template 16
max-calls-per-button 2
username "name" password mbj62871
type 524G
button 1:16
ephone 24
device-security-mode none
mac-address 52CE.B390.0001
max-calls-per-button 2
type anl
ephone 25
device-security-mode none
mac-address 52CE.B390.0002
max-calls-per-button 2
type anl
ephone 26
device-security-mode none
mac-address 52CE.B390.0003
max-calls-per-button 2
type anl
ephone-hunt 1 sequential
pilot 501
list 203, 204, 205
final 511
timeout 8, 8, 8
no-reg pilot
statistics collect
banner login Cisco Configuration Assistant. Version: 2.1. Wed Oct 28 17:59:52 EST 2009
alias exec cca_voice_mode PBX
line con 0
no modem enable
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
line vty 5 100
enddebug ccsip messages would not give me anything, so i did debug ccsip all instead, when voice
mail is dialed I get the below debug messages.
000235: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIAddContextToTable: Added context(0x8687FF80) with key=[2] to table
000236: //6/000000000000/SIP/State/sipSPIChangeState: 0x8687FF80 : State change from (STATE_NONE, SUBSTATE_NONE) to (STATE_IDLE, SUBSTATE_NONE)
000237: //6/000000000000/SIP/Info/ccsip_call_setup_request: Before processing SETUP REQccb->pld.flags_ipip = 200
000238: //6/000000000000/SIP/Info/ccsip_call_setup_request: This is a TDM-IP call: callID= 6, peer_callID = 5
000239: //6/000000000000/SIP/Info/ccsip_call_setup_request: This is a TDM-IP call: callID= 6, peer_callID = 5
000240: //6/000000000000/SIP/Info/ccsip_call_setup_request: After processing SETUP REQccb->pld.flags_ipip = 200
000241: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIGetOutboundHostAndDestHostPrivate: CCSIP: target_host : 10.1.10.1 target_port : 5060
000242: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIGetOutboundHostAndDestHostPrivate: CCSIP: outbound_host : 10.1.10.1 outbound_port : 5060
000243: //-1/xxxxxxxxxxxx/SIP/Event/sipSPIEventInfo: Queued event from SIP SPI : SIPSPI_EV_CC_CALL_SETUP
000244: //6/2022F86C800C/SIP/Info/ccsip_call_setup_request: Incrementing call counter in dial-peer [2000]
000245: //-1/xxxxxxxxxxxx/SIP/Info/ccsip_process_sipspi_queue_event: ccsip_spi_get_msg_type returned: 3 for event 2
000246: //6/2022F86C800C/SIP/Info/sipSPIUaddccCallIdToTable: Adding call id 6 to table
000247: //6/2022F86C800C/SIP/Info/sipSPIGetCallConfig: preferred_codec set[0] type :No Codec bytes: 0
000248: //6/2022F86C800C/SIP/Info/sipSPIGetCallConfig: Media forking disabled
000249: //6/2022F86C800C/SIP/Info/sipSPICanSetFallbackFlag: Local Fallback is not active
000250: //6/2022F86C800C/SIP/Info/sipSPIGetCallConfig: Not using Voice Class Codec
000251: //6/2022F86C800C/SIP/Info/sipSPIGetCallConfig: Checking Video Type Rate=-1 video_codec_allowed=1F
000252: //6/2022F86C800C/SIP/Media/sipSPICopyPeerDataToCCB: Firewall traversal is not enabled
000253: //6/2022F86C800C/SIP/Info/sipSPIGetCallConfig: xcoder high-density disabled
000254: //6/2022F86C800C/SIP/Info/sipSPIGetCallConfig: Flow Mode set to FLOW_THROUGH
000255: //6/2022F86C800C/SIP/Info/sipSPIGetCallConfig: Media forking disabled
000256: //6/2022F86C800C/SIP/Info/preprocessSetup:
This is a not a SIGO Call -, could be DM call
000257: //6/2022F86C800C/SIP/Media/sipSPISetMediaSrcAddr: Media src addr for stream 1 = 10.1.10.2
000258: //-1/xxxxxxxxxxxx/SIP/Media/sipSPIReserveRtpPort: reserved port 17510 for stream 1
000259: //-1/xxxxxxxxxxxx/SIP/Info/convert_codec_bytes_to_ptime: Values :Codec: g711ulaw codecbytes :160, ptime: 20
000260: //-1/xxxxxxxxxxxx/SIP/Info/sipSPISetMediaDirectionForStream: Setting Media direction SENDRECV for stream 1
000261: //6/2022F86C800C/SIP/Info/sip_generate_sdp_xcaps_list: Modem Relay and T38 disabled. X-cap not needed
000262: //6/2022F86C800C/SIP/Info/sipSPIOutgoingCallSDP: Creating recv-only stream for outbound call
000263: //6/2022F86C800C/SIP/Media/sipSPIProcessRtpSessions: sipSPIProcessRtpSessions
000264: //6/2022F86C800C/SIP/Media/sipSPIProcessRtpSessions: No active streams.
000265: //6/2022F86C800C/SIP/Info/sip_gw_pre_setup_add_sdp_container: SDP container added
000266: //6/2022F86C800C/SIP/Info/sipSPIValidateGtd: Signal Forward disabled
000267: //6/2022F86C800C/SIP/Info/sipSPIValidateTunnelData: RawMsg/QSIG Tunneling Not Enabled
000268: //6/2022F86C800C/SIP/Info/sipSPIAddMLPPServicesInfo: No MLP Info available on incoming leg
000269: //6/2022F86C800C/SIP/Info/sipSPIPreprocessUriFormat: Url cfg for 1: 2,phone-ctxt=FALSE
000270: //6/2022F86C800C/SIP/Info/sipSPIShrlGetInstanceInfo: Obtained the call instance 0 for non-shared-line '101' with callid: 6
000271: //6/2022F86C800C/SIP/Info/sipSPIAddCiscoGcid: Gcid value not set - not adding header.
000272: //6/2022F86C800C/SIP/Info/sipSPIAddPrivacyandIdentityInfo: Removing "id" value from Privacy
000273: //6/2022F86C800C/SIP/Error/sipSPI_ipip_set_history_info_header: Not SIP2SIP mode
000274: //6/2022F86C800C/SIP/Info/act_idle_call_setup: Cannot process Outgoing SIP calls
SIP Service has been shutdown
000275: //6/2022F86C800C/SIP/Info/ccsip_set_cc_cause_for_spi_err: Categorized cause:38, category:187
000276: //-1/xxxxxxxxxxxx/SIP/Info/ccsip_set_release_source_for_peer: ownCallId[6], src[6]
000277: //6/2022F86C800C/SIP/Info/sipSPIInitiateDisconnect: Gateway shutdown:Initiate call disconnect(38)
000278: //6/2022F86C800C/SIP/Info/sipSPIInitiateDisconnect: Initiate call disconnect(38) for outgoing call
000279: //-1/xxxxxxxxxxxx/SIP/Error/sipSPIGetContentQSIG: No Inbound Container Created !!!
000280: //-1/xxxxxxxxxxxx/SIP/Error/sipSPIGetContentQ931: No Inbound Container Created !!!
000281: //6/2022F86C800C/SIP/State/sipSPIChangeState: 0x8687FF80 : State change from (STATE_IDLE, SUBSTATE_NONE) to (STATE_DISCONNECTING, SUBSTATE_NONE)
000282: //6/2022F86C800C/SIP/Info/ccsip_call_statistics: Stats are not supported for IPIP call.
000283: //-1/xxxxxxxxxxxx/SIP/Event/sipSPIEventInfo: Queued event from SIP SPI : SIPSPI_EV_CC_CALL_DISCONNECT
000284: //-1/xxxxxxxxxxxx/SIP/Info/ccsip_process_sipspi_queue_event: ccsip_spi_get_msg_type returned: 3 for event 7
000285: //6/2022F86C800C/SIP/Info/sipSPIIcpifUpdate: CallState: 2 Playout: 0 DiscTime:25967 ConnTime 0
000286: //6/2022F86C800C/SIP/State/sipSPIChangeState: 0x8687FF80 : State change from (STATE_DISCONNECTING, SUBSTATE_NONE) to (STATE_DEAD, SUBSTATE_NONE)
000287: //6/2022F86C800C/SIP/Call/sipSPICallInfo:
The Call Setup Information is:
Call Control Block (CCB) : 0x8687FF80
State of The Call : STATE_DEAD
TCP Sockets Used : YES
Calling Number : 203
Called Number : 101
Source IP Address (Sig ): 10.1.10.2
Destn SIP Req Addr:Port :
Destn SIP Resp Addr:Port :
Destination Name :
000288: //6/2022F86C800C/SIP/Call/sipSPIMediaCallInfo:
Number of Media Streams: 1
Media Stream : 1
Negotiated Codec : No Codec
Negotiated Codec Bytes : 0
Nego. Codec payload : 255 (tx), 255 (rx)
Negotiated Dtmf-relay : 0
Dtmf-relay Payload : 0 (tx), 0 (rx)
Source IP Address (Media): 10.1.10.2
Source IP Port (Media): 17510
Destn IP Address (Media): -
Destn IP Port (Media): 0
Orig Destn IP Address:Port (Media): [ - ]:0
000289: //6/2022F86C800C/SIP/Call/sipSPICallInfo:
Disconnect Cause (CC) : 38
Disconnect Cause (SIP) : 200
000290: //6/2022F86C800C/SIP/Info/sipSPIUdeleteccCallIdFromTable: Removing call id 6
000291: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIDeleteContextFromTable: Context for key=[2] removed.
000292: //6/2022F86C800C/SIP/Info/sipSPIFlushEventBufferQueue: There are 0 events on the internal queue that are going to be free'd
000293: //6/2022F86C800C/SIP/Info/ccsip_qos_cleanup: Entry
000294: //-1/xxxxxxxxxxxx/SIP/Info/sipSPISipSdpFree:
000295: //6/2022F86C800C/SIP/Info/sipSPI_ipip_free_codec_profile: Codec Profiles Freed
000296: //6/2022F86C800C/SIP/Info/sipSPIUfreeOneCCB: Freeing ccb 8687FF80
000297: //-1/xxxxxxxxxxxx/SIP/Info/ -
Unity Express - Incoming calls wont get voice mail
CUE works fine with telephones on my local network. Incoming and outgoing calls work fine.
However when I get an incoming call via SIP trunk the call will not get forwarded to unity express after 10 seconds. The line goes dead.
I searched for another post which suggested the following commands:
telephony-service
call-forward pattern .T
voice service voip
allow connections from h323 to sip
I've double checked them and there's still something wrong.
Here's my current configuration:
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
h323
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g711alaw
telephony-service
load 7910 P00403020214
load 7960-7940 P00305000301
max-ephones 24
max-dn 24
ip source-address 192.168.20.1 port 2000
auto assign 1 to 24
system message Comtek
voicemail 3000
max-conferences 8 gain -6
call-forward pattern .T
moh music-on-hold.au
time-webedit
transfer-system full-consult
transfer-pattern 2...
transfer-pattern 3...
directory last-name-first
directory entry 2 2001 name Phone Two 7912
directory entry 3 2000 name Phone One 7970
ephone-dn 1 dual-line
number 2000 secondary 441833000000
call-forward busy 3000
call-forward noan 3000 timeout 10
no huntstop
ephone 1
no multicast-moh
device-security-mode none
mac-address 0017.0EF0.3642
type 7970
button 1:1
So pros, any suggestions?
ThanksI made a new dial-peer to handle incoming calls as follows.
dial-peer voice 1000 voip
description Incoming SIP
translation-profile incoming SIPin
voice-class codec 1
session protocol sipv2
incoming called-number .T
dtmf-relay rtp-nte
no vad
The translation-profile puts the call through to my 2000 extension.
This is my "show call active voice brief" when an external incoming call is ringing through to my 2000 ephone-dn.
To me this seems to show the dial-peer "1000" matching and using the g711ulaw codec
Telephony call-legs: 1
SIP call-legs: 1
H323 call-legs: 0
Call agent controlled call-legs: 0
SCCP call-legs: 0
Multicast call-legs: 0
Total call-legs: 2
1715 : 552 596706500ms.1 +-1 pid:1000 Answer +441833696807 connecting
dur 00:00:00 tx:0/0 rx:0/0
IP 87.127.240.98:16188 SRTP: off rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g711ulaw TextRelay: off
media inactive detected:n media contrl rcvd:n/a timestamp:n/a
long duration call detected:n long duration call duration:n/a timestamp:n/a
1715 : 553 596706510ms.1 +-1 pid:20001 Originate 2000 connecting
dur 00:00:00 tx:0/0 rx:0/0
Tele 50/0/1 (553) [50/0/1.0] tx:0/0/0ms None noise:0 acom:0 i/0:0/0 dBm
Telephony call-legs: 1
SIP call-legs: 1
H323 call-legs: 0
Call agent controlled call-legs: 0
SCCP call-legs: 0
Multicast call-legs: 0
Total call-legs: 2
This is the "show call active voice brief" for an external incoming call when the call is established.
Telephony call-legs: 1
SIP call-legs: 1
H323 call-legs: 0
Call agent controlled call-legs: 0
SCCP call-legs: 0
Multicast call-legs: 0
Total call-legs: 2
1731 : 569 597220040ms.1 +3730 pid:1000 Answer +441833696807 active
dur 00:00:02 tx:105/16800 rx:104/16640
IP 87.127.240.98:15162 SRTP: off rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g711ulaw TextRelay: off
media inactive detected:n media contrl rcvd:n/a timestamp:n/a
long duration call detected:n long duration call duration:n/a timestamp:n/a
1731 : 570 597220060ms.1 +3700 pid:20001 Originate 2000 active
dur 00:00:02 tx:0/0 rx:105/16800
Tele 50/0/1 (570) [50/0/1.0] tx:16180/16180/0ms g711ulaw noise:0 acom:0 i/0:0/0 dBm
Telephony call-legs: 1
SIP call-legs: 1
H323 call-legs: 0
Call agent controlled call-legs: 0
SCCP call-legs: 0
Multicast call-legs: 0
Total call-legs: 2
Not too sure where to go from here. -
Fax outdial retries consume all voice channels on SIP 484 error (Cisco 2911)
I've been seeing a nasty fax/VoIP problem on a 2911, running IOS 15.0(1r)M12. Any suggestions would be welcome.
I have a 2911 which is set up to do T.37 offramp fax delivery (SMTP message is sent to 2911, which places a VoIP call over SIP/RTP/T.38 to deliver the fax). The mainline case is set up, and working correctly - faxes are delivered without issue. If a destination address is selected such that the VoIP switch returns a SIP 484 error, then everything fails in a spectacular fashion:
The outdial is immediately retried, placing another SIP INVITE to the switch, with the same destination address, which obviously also gets the same 484 response.
Each time the outdial takes place, it consumes voice channels on the DSP, which are not released on receipt of the 484.
When there are no free voice channels, a no circuit (0x22) error is returned, and all the voice channels are finally released.
The MTA that submitted the SMTP message retries every minute (it doesn't get a permanent failure report when the 2911 fails to place the call)
This leads to a situation where no fax calls can be placed, as all the voice channels are being used up by retrying this call that can never succeed.
Some other relevant information:
The VoIP switch does not return a 484 immediately. First it sends a SIP 183, and plays early media (an announcement about how the call isn't allowed).
It takes 8 seconds before the 484 is returned. The 2911 sends a new SIP INVITE every 8 seconds (as soon as it gets a 484 for the previous attempt).
The "sip-ua" statistics show that the INVITE retry counter is not being incremented (i.e. this is not a retry at the scope of the SIP stack).
The T1 cable is looped-back to the 2911, so that the complete path for fax delivery looks like this:
MTA ---SMTP---> 2911 ---T1---> 2911 ---SIP---> VoIP switch
If I set "mta receive generate permanent-error", then I still see this retry behaviour, with all the voice channels being consumed. Once that has happened (after about 3 minutes) the MTA does get the error response, and no longer retries every minute after that (although this setting has other negative effects that I'd like to avoid).
Does anyone have any idea how I can get the 2911 to return a permanent failure to the MTA after just a single outdial has failed with a SIP 484?
Here is the dial-peer config:
dial-peer voice 1 voip
translation-profile incoming IncomingVoip
incoming called-number .
voice-class codec 1
dtmf-relay rtp-nte
fax protocol t38 version 0 ls-redundancy 3 hs-redundancy 0 fallback pass-through g711ulaw
no vad
dial-peer voice 2 pots
destination-pattern ^0005
port 1/1:23
forward-digits all
dial-peer voice 3 pots
translation-profile incoming IncomingPRI_1_0
service onramp-app
incoming called-number ^0005
direct-inward-dial
port 1/0:23
dial-peer voice 4 mmoip
service fax_on_vfc_onramp_app out-bound
destination-pattern .
information-type fax
session target mailto:$m$@<DOMAIN NAME>
image encoding MH
dial-peer voice 101 mmoip
translation-profile incoming IncomingMMoIP
service offramp-app
information-type fax
incoming called-number .
dial-peer voice 102 pots
destination-pattern .
port 1/0:23
forward-digits all
dial-peer voice 103 pots
translation-profile incoming IncomingPRI_1_1
incoming called-number ^0007
direct-inward-dial
port 1/1:23
dial-peer voice 104 voip
translation-profile outgoing OutgoingVoip
destination-pattern ^0008
session protocol sipv2
session target ipv4:<VoIP SWITCH IP ADDRESS>
voice-class codec 1
dtmf-relay rtp-nte
fax protocol t38 version 0 ls-redundancy 3 hs-redundancy 0 fallback pass-through g711ulaw
no vadHi Ellad.
Why don't try to use the 2811 as a SIP signalling proxy only?
In this way the media (RTP or T.38) will be handled only from the two MERA SoftSwitch.
To do this you must enable CUBE on your 2811 and use these special commands:
voice service voip
media flow-around
allow-connections sip to sip
signaling forward unconditional
sip
rel1xx disable
header-passing
midcall-signaling passthru
pass-thru headers unsupp
pass-thru content unsupp
pass-thru content sdp
I don't remember if we have already try this solution.
Regards. -
Hi,
We have a 2Mbps LL 1:4
we are using CSICO ATA for Voice.
we are using cisco 2620 router .
Here are my questions.
1.Kindly check My config and say whether this QOS config will work for prioritising the Voice.
class-map match-all VOIP-RTP
match ip dscp ef
policy-map VOICE-QOS
class VOIP-RTP
priority 1024
interface Serial0/0
description ### STPI-GATEWAY-VASHI ###
bandwidth 2048
ip address 213.11.12.115 255.255.255.252
ip access-group 103 in
ip access-group 103 out
service-policy output VOICE-QOS
shutdown
2.How can i filter the HTTP,TELNET,SSH,RDP,FTP traffic.
Kindly help me.
Thanks
RangaA more scalable config (that you dont have to redo too much) might include bandwidth guarantees for other classes of traffic as well...
Also, I like to go with the qos design guide recommendation and set aside a queue for voice signalling... like the following...
i also dont "match ip dscp ef" but rather just look for rtp audio... dont always have a marking switch/phone system behind your router... sometimes its a whitebox phone system sending rtp packets, and a dumb switch... I also go with a nested policy, which shapes all to the speed of the link, then decides which traffic will follow the rules of the child policy to leave the single queue ;)
class-map match-any manage
match protocol dhcp
match protocol dns
match protocol kerberos
match protocol ldap
match protocol snmp
match protocol syslog
class-map match-any bulk
match protocol exchange
match protocol ftp
match protocol pop3
match protocol smtp
class-map match-any voicesignal
match protocol h323
match protocol rtcp
class-map match-any transactional
match protocol citrix
match protocol pcanywhere
match protocol secure-telnet
match protocol sqlnet
match protocol sqlserver
match protocol ssh
match protocol telnet
match protocol tsrvrdp
class-map match-any video
match protocol rtp video
match protocol cuseeme
match protocol netshow
match protocol rtsp
match protocol streamwork
match protocol vdolive
class-map match-any voicebearer
match protocol rtp audio
policy-map Pol-S0/0/0.1-child
class voicebearer
set dscp ef
priority percent 25
class transactional
bandwidth percent 25
class voicesignal
bandwidth percent 5
class manage
bandwidth percent 5
policy-map Pol-S0/0/0.1-parent
class class-default
shape average 1444000
service-policy Pol-0/0/0.1-child
int s0/0/0.1
service-policy output Pol-S0/0/0.1-parent
(yes not all my classes are used in my policy; they are for future use... nice to have them in there now though, as they can always be allocated some bandwidth later on, at the expense of what is carved out now...)
Tschuss,
Joe -
Priority queue for voice/audio traffic
Hi,
Still in limbo after multiple discussions with our vendors, TAC and in general other engineers, so starting a thread here. In the process of rolling out enterprise audio, with the intent to prioritize and allocate 25% of link bandwidth for voice class.
Our config snapshow is as follows -
policy-map qos-wan-out
class dscp-voice-lan
set ip precedence 5
priority percent 25
I understand that
-DURING congestion, this will ensure voice gets a maximum of 25% and is dequeued first due to the priority setting
-And during NO congestion, the voice traffic will be dequeued before other traffic, but at the same time, can go over 25% as QoS kicks in only during congestion.
I am seeing some contradictory results in that we are having high packet loss if we exceed 25% even when the link is less than 40% utilized. I doubt the above CE configurations are an issue. But, wanted to run this by this group.
Alternate theory is that with the above configurations, our traffic is exiting fine - but the service provider who is using priority class queuing within their MPLS network may be capping the bandwidth at 25% at all times (with or without congestion).
thanksHi Bro
Maybe the incoming voice packets into your FW isn't marked with ef. For this reason, you don't see anything at all. I hope the QOS isn't tied to a subinterface, as QOS is only supported on the main interface itself. What you're doing here is QoS Configuration based on DSCP. You could refer to this URL for troubleshooting purposes.
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008080dfa7.shtml#tab4
Did you marked on the Cisco Catalyst switchports, which ports are ef? -
Bad Class File error - Win2k & J2SDK1.4.0_01
Hi,
I am trying to run a 'Hello World' program which came with the FreeTTS package from links from the java.sun.com website, and am not able to compile the program. I get the error:
FreeTTSHelloWorld.java:4: cannot access file
cl.com.sun.speech.freetts.audio.Voice
bad class file: .\cl\com\sun\speech\freetts\audio\Voice.class
class file contains wrong class: com.sun.speech.freetts.Voice
Please remove or make sure it appears in the correct subdirectory of the classpath.
import cl.com.sun.speech.freetts.audio.Voice;
_______________________________________^
The FreeTTSHelloWorld.java File is printed below [its embarassingly simple..]
* Copyright 2001 Sun Microsystems, Inc.
import cl.com.sun.speech.freetts.audio.Voice;
import cl.com.sun.speech.freetts.audio.JavaClipAudioPlayer;
import cl.com.sun.speech.freetts.en.us.CMULexicon;
public class FreeTTSHelloWorld {
public static void main(String[] args) {
try {
String voiceClassName = (args.length > 0) ? args[0] :
"com.sun.speech.freetts.en.us.CMUDiphoneVoice";
Class voiceClass = Class.forName(voiceClassName);
Voice helloVoice = (Voice) voiceClass.newInstance();
helloVoice.setLexicon(new CMULexicon());
helloVoice.setAudioPlayer(new JavaClipAudioPlayer());
helloVoice.load();
helloVoice.speak
("Thank you for giving me a voice. I'm so glad to say
hello to this world.");
System.exit(0);
catch (Exception e) {
e.printStackTrace();
I've tried a billion things, including moving around the .class files [which, by the way, i extracted myself from the .jar files which came with the FreeTTS package - is that what i'm doing wrong? if so, please tell me - ] and still nothing happens - the same error results.
I've tried reading other cases similar to mine in the forums, but most of the things i read didn't apply to my (quite simple) situation, such as the 'package' line needing to be removed or anything like that..
I run Win2k and have j2sdk1.4.0_01 installed on my machine
I beg for anyone's help. Thanks in advance
-=-Miagi-=-Aha!
Extracting from the jar file might be ok, as long as the directory it's extracted into reflects the class's package name. Open the jar file using WinZip and you'll see that the files it contains are in directories that exactly mirror (including case) the package names.
The error you're getting tells you that java is looking in .\cl\com\sun\speech\freetts\audio\Voice.class (the '.\' means relative to your current working directory) and my bet would be that the file is not there!
You shouldn't need to extract these files at all, actually: Try deleting the files you extracted from the jar then try running your program again.
I hope this is helpful...
Chris. -
No non-linear under voice-port to reslove hissing on NM-HDV
Hello.
I have a trouble with 2MFT on NM-HDV.
I can hear hissing on call.
So, i had configured no non-linear under voice-port, then i can't hear any hissing.
Instead, I can hear echo on call.
How can i fix it?
Regard,
john.Hell Venky.
Thnak you for your helping.
I tried to configure based on the web site what did you told me.
But i couldn't success it to resolve echo issue.
The voice gate have 12.4(1a) on Cisco 2851.
So the solution to reslove echo doesn't fit in my case.
As i mentioned, normally i can hear noise each i talk another persion. If i stop the conversation i can't hear noise. but i started to talk again, i can hear noise each time.
Thus i tried to disable "no non-linear" parameter, i can hear echo instead noise.
So i should choice if i can hear noise or echo.
And also, i tried to change input gain and output attenuation from -6 to 14, but the each still can hear.
out voip network toplolog is below.
NEC Digital Phone---NEC PBX---Gateway---(cat6500---MSPP(WAN Area)---cat6500)---Gateway---NEC Digital Phone.
If i make a call using Normal Phone (INot Digital Phone), I can't hear noise. Whenever i can hear noise with NEC Digital Phone.
Here is the option on cisco 2851 with 12.4
2851(config-voiceport)#?
Voice-port configuration commands:
bearer-cap Specify the bear capability
busyout Configure busyout trigger event & procedure
comfort-noise Use fill-silence option
compand-type The companding type for this voice port
connection Specify Trunking Parameters
cptone Configure voice call progress tone locale
default Set a command to its defaults
description Description of what this port is connected to
disc_pi_off close voice path when disconnect with PI received
echo-cancel Echo-cancellation option
exit Exit from voice-port configuration mode
idle-detection Idle code detection for digital voice
input Configure input gain for voice
music-threshold Threshold for Music on Hold
no Negate a command or set its defaults
non-linear Use non-linear processing during echo cancellation
output Configure output attenuation for voice
playout-delay Configure voice playout delay buffer
shutdown Take voice-port offline
threshold Threshold [noise] for voice port
timeouts Configure voice timeout parameters
translate Translation rule
translation-profile Translation profile
trunk-group Configure interface to be in a trunk group
voice-class Set voiceport voice class control parameters
Please advise to me to reslove the problem.
Regard,
john. -
AS5300 - Voice Port Configuration Problem
Hi guys,
I'm trying to configure a E1 PRI 8 Port Module on a AS5300 (IOS: 12.3(18)) but after I configured the controller, I can't find the voice ports. if I do a sh voice port summ there are no voice ports listed.
The controller is showing up in sh controllers e1 0.
Also under the dial-peer there is no port command..
Anybody has had this issue before?
Thanks.
Best regardshere are the outputs:
Router#sh vers
Cisco Internetwork Operating System Software
IOS (tm) 5300 Software (C5300-JS-M), Version 12.3(18), RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Wed 15-Mar-06 16:39 by dchih
Image text-base: 0x60008AEC, data-base: 0x618EC000
ROM: System Bootstrap, Version 12.0(2)XD1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
BOOTLDR: 5300 Software (C5300-BOOT-M), Version 12.1(17), RELEASE SOFTWARE (fc1)
Router uptime is 3 hours, 53 minutes
System returned to ROM by reload at 16:26:08 gmt Sun Jan 2 2000
System image file is "flash:c5300-js-mz.123-18.bin"
cisco AS5300 (R4K) processor (revision A.32) with 131072K/16384K bytes of memory.
Processor board ID 14898234
R4700 CPU at 150MHz, Implementation 33, Rev 1.0, 512KB L2 Cache
Channelized E1, Version 1.0.
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
Primary Rate ISDN software, Version 1.1.
Backplane revision 2
Manufacture Cookie Info:
EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x30,
Board Hardware Version 1.80, Item Number 800-2544-03,
Board Revision A0, Serial Number 14898234,
PLD/ISP Version 0.0, Manufacture Date 8-Jul-1999.
1 Ethernet/IEEE 802.3 interface(s)
1 FastEthernet/IEEE 802.3 interface(s)
35 Serial network interface(s)
240 terminal line(s)
8 Channelized E1/PRI port(s)
128K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
8192K bytes of processor board Boot flash (Read/Write)
Configuration register is 0x2102
Router#sh run
Building configuration...
Current configuration : 2057 bytes
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Router
boot-start-marker
boot-end-marker
enable password cisco
spe 1/0 2/9
firmware location system:/ucode/mica_port_firmware
resource-pool disable
clock timezone gmt 2
no aaa new-model
ip subnet-zero
ip cef
isdn switch-type primary-net5
isdn voice-call-failure 0
voice call send-alert
voice rtp send-recv
voice service pots
voice service voip
sip
voice class codec 1
voice class codec 100
controller E1 0
framing NO-CRC4
pri-group timeslots 1-31
controller E1 1
clock source line secondary 1
controller E1 2
clock source line secondary 2
controller E1 3
clock source line secondary 3
controller E1 4
clock source line secondary 4
controller E1 5
clock source line secondary 5
controller E1 6
clock source line secondary 6
controller E1 7
clock source line secondary 7
interface Ethernet0
no ip address
interface Serial0
no ip address
clock rate 2015232
no fair-queue
interface Serial1
no ip address
clock rate 2015232
no fair-queue
interface Serial2
no ip address
clock rate 2015232
no fair-queue
interface Serial3
no ip address
shutdown
clock rate 2015232
no fair-queue
interface Serial0:15
no ip address
encapsulation hdlc
isdn switch-type primary-net5
isdn incoming-voice modem
no cdp enable
interface FastEthernet0
ip address 1.1.1.1 255.255.255.252
duplex auto
speed auto
ip classless
ip route 0.0.0.0 0.0.0.0 1.1.1.2
no ip http server
dial-peer voice 100 voip
destination-pattern .T
session protocol sipv2
session target ipv4:192.168.1.1
session transport udp
dtmf-relay rtp-nte
dial-peer voice 10 pots
destination-pattern .T
direct-inward-dial
sip-ua
no remote-party-id
sip-server ipv4:192.168.1.1
line con 0
line 1 240
line aux 0
line vty 0 4
transport input lat pad mop telnet rlogin udptn
end
Router#
Router#sh diag
Motherboard Info:
Backplane revision 2
Manufacture Cookie Info:
EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x30,
Board Hardware Version 1.80, Item Number 800-2544-03,
Board Revision A0, Serial Number 14898234,
PLD/ISP Version 0.0, Manufacture Date 8-Jul-1999.
EEPROM format version 0
EEPROM contents (hex):
0x00: 00 01 01 30 01 50 03 20 00 09 F0 03 41 00 31 34
0x10: 38 39 38 32 33 34 00 00 00 00 00 00 00 00 13 63
0x20: 07 08 00 00 FF FF FF FF FF FF FF FF FF FF FF FF
0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
FRU NUMBER : AS5300
Slot 0:
Hardware is Octal E1 PRI, 8 ports
Manufacture Cookie Info:
EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x49,
Board Hardware Version 1.0, Item Number 800-3883-01,
Board Revision A0, Serial Number 14896274,
PLD/ISP Version 0.1, Manufacture Date 29-Jun-1999.
EEPROM format version 0
EEPROM contents (hex):
0x00: 00 01 01 49 01 00 03 20 00 0F 2B 01 41 00 31 34
0x10: 38 39 36 32 37 34 00 00 00 00 00 00 00 00 13 63
0x20: 06 1D 00 01 FF FF FF FF FF FF FF FF FF FF FF FF
0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
FRU NUMBER : AS53-8CE1+=
Slot 1:
Hardware is Duo Density Modems
Manufacture Cookie Info:
EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x4C,
Board Hardware Version 1.0, Item Number 800-3680-01,
Board Revision A0, Serial Number 14049055,
PLD/ISP Version 2.2, Manufacture Date 7-Jul-1999.
EEPROM format version 0
EEPROM contents (hex):
0x00: 00 01 01 4C 01 00 03 20 00 0E 60 01 41 00 31 34
0x10: 30 34 39 30 35 35 00 00 00 00 00 00 00 00 13 63
0x20: 07 07 02 02 FF FF FF FF FF FF FF FF FF FF FF FF
0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
FRU NUMBER : AS53-120-CC2=
Slot 2:
Hardware is Duo Density Modems
Manufacture Cookie Info:
EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x4C,
Board Hardware Version 1.0, Item Number 800-3680-01,
Board Revision A0, Serial Number 14055218,
PLD/ISP Version 2.2, Manufacture Date 7-Jul-1999.
EEPROM format version 0
EEPROM contents (hex):
0x00: 00 01 01 4C 01 00 03 20 00 0E 60 01 41 00 31 34
0x10: 30 35 35 32 31 38 00 00 00 00 00 00 00 00 13 63
0x20: 07 07 02 02 FF FF FF FF FF FF FF FF FF FF FF FF
0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
FRU NUMBER : AS53-120-CC2=
Router#
Maybe you are looking for
-
As above. I can use Migration Assistant to move my account from my old machine, but the data are far too extensive to fit on the solid state drive. I copied my user folder over to the new hard drive, but how do I access its contents? More accurately,
-
How to see if Option 43 is working for the AP
I have configured my dhcp server to provide the WLC IP address to the APs over the option 43, but the AP is not joining to the controller. I just wanted to check in the AP to see if it's looking for the right controller IP to be sure it was able to g
-
I am a cloud member and my cs6 encore lost its library of templates, how to i get them back
I am a cloud member and my cs6 encore lost its library of templates, how to i get them back
-
I have garageband 11 and need to know how to make a good deep bass drum that thumps for a rap type song - thanks just getting started so I would appreciate some assistance Mike
-
Hi I have this select statement with 4 tables wich are accually 2 tables with 2 self joins. table a,b contain about 1.000.000 records and table c,d about 40.000.000. Because I use the same tables twice is there a way to let the database read them fas