Voice Messaging: Cannot enable v8.1 per "accepted ...
Community:
I have (2-1/2) issues working in unision, and I need some divine intervention from the Microsoft Godz.
Issue 1) Skype "New desktop" windows 8.1 version. I can "enable" Voicemail, but have no ability to configure ring time, greeting, etc. In other words the "accepted Solution" screenshot of a "laptop" with "enable" button then all the configurable options do not exist for me. Only SMS messages.
WORKAROUND: Installed the "Windows Desktop" Vesion from the Skype website - I could then use the "Tools" feature and set it all up. AKa looked like the Win7 version.
Issue 2) The 1st call i make - works FINE. The 2nd time my Lumina 925 rings and voicemail no longer works.
Sooooo how do i get voice mail to work across the board? how do I get vm options to show up in the 8.1 web interface?
Solved!
Go to Solution.
If you do a search around this forum and around the web you'll find lots of complaints about Skype's voice mail -- especially, on Windows Phone. For reasons that neither Skype nor Microsoft have made public, voice mail does not work in Skype on Windows Phone (there is no voice mail access functionality) and, to make matters worse, if you are signed in to Skype on a Windows Phone device it seems to disable Skype voice mail functionality completely (i.e., unanswered Skype calls will not roll over to voice mail on any device, including PC, iOS or Android). It's very frustrating (especially, the lack of any explanation from Skype/Microsoft) and essentially makes Skype unusable on a Windows Phone device if voice mail functionality is important to you.
At this point it seems the only solution to the issue, if you want Skype voice mail to work, is to make sure you are signed out of Skype on your Windows Phone device. That way, Skype voice mail will function properly on PC, iOS, and Android devices: unanswered Skype calls will roll over to voice mail, you'll get an email notification of a voice mail (if you have enabled that option), you'll get an in-app notification of voice mail, and you'll be able to play the voice mail in-app. This assumes that they do not cripple the Skype client on these other OSs like it is on Windows Phone OS. They did try to remove voice mail from the iOS client back in June (describing it as an "improved" client), but there were so many complaints that they added it back immediately.
It would be nice if Skype/Microsoft was more transparent about why they are doing this and where they are going with Skype. Right now, with the crippled Windows Phone client and their constant attempts to remove functionality from other OS clients, all they're doing is causing folks who depend on (and *pay* for via SkypeIn numbers) voice mail to look for other solutions.
Similar Messages
-
i'm trying to copy pics from my pc to Iphone4s and am getting an error message - cannot copy item - the device has either stopped responding or has been disconnected. please tell me what to do to enable me to transfer the pics
Are you syncing the photos using Itunes?
When you plug your phone into your PC, in Itunes under the picture tab you can sync photo and then choose the photos.
Look here more detailed instructions
http://support.apple.com/kb/HT4236 -
Sender File Adapter cannot send single record per message ?
Hi,
I have scenario flat file to jdbc. but then why the sender file adapter didn't split the record to become single record per message eventhough i have set it in "Recordsets Per Message" = 1. ?
Document Name MT_APINVOICE
Document Namespace urn:file:jdbc:apivinvoice
Document Offset 8
Recordset Name INPUT
Recordset Namespace
Recordset Structure RECORD,*
Recordset Sequence Ascending
Recordset per Message 1
Key Field Name
Key field Type String
RECORD.fieldFixedLengths 10,5,10,10
RECORD.endSeparator 'nl'
RECORD.fieldNames F1,F2,F3,F4
Please advise
Thank You and Best Regards
Fernand>>but then how to make for example more then 1 records per message.
like 10 records per message. should i set RECORD,10 ?
That is right. Just try it out yourself.
@Shesagiri,
Number of record is decided by the parameter Recordset structure and number of recordset with in a message is decided by Recordset per Message.
Regards
Jaishankar -
ORA-00385: cannot enable Very Large Memory with new buffer cache 11.2.0.2
[oracle@bnl11237dat01][DWH11]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.2.0 Production on Mon Jun 20 09:19:49 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup mount pfile=/u01/app/oracle/product/11.2.0/dbhome_1/dbs//initDWH11.ora
ORA-00385: cannot enable Very Large Memory with new buffer cache parameters
DWH12.__large_pool_size=16777216
DWH11.__large_pool_size=16777216
DWH11.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
DWH12.__pga_aggregate_target=2902458368
DWH11.__pga_aggregate_target=2902458368
DWH12.__sga_target=4328521728
DWH11.__sga_target=4328521728
DWH12.__shared_io_pool_size=0
DWH11.__shared_io_pool_size=0
DWH12.__shared_pool_size=956301312
DWH11.__shared_pool_size=956301312
DWH12.__streams_pool_size=0
DWH11.__streams_pool_size=134217728
#*._realfree_heap_pagesize_hint=262144
#*._use_realfree_heap=TRUE
*.audit_file_dest='/u01/app/oracle/admin/DWH/adump'
*.audit_trail='db'
*.cluster_database=true
*.compatible='11.2.0.0.0'
*.control_files='/dborafiles/mdm_bn/dwh/oradata01/DWH/control01.ctl','/dborafiles/mdm_bn/dwh/orareco/DWH/control02.ctl'
*.db_block_size=8192
*.db_domain=''
*.db_name='DWH'
*.db_recovery_file_dest='/dborafiles/mdm_bn/dwh/orareco'
*.db_recovery_file_dest_size=7373586432
*.diagnostic_dest='/u01/app/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=DWH1XDB)'
DWH12.instance_number=2
DWH11.instance_number=1
DWH11.local_listener='(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=bnl11237dat01-vip)(PORT=1521))))'
DWH12.local_listener='(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=bnl11237dat02-vip)(PORT=1521))))'
*.log_archive_dest_1='LOCATION=/dborafiles/mdm_bn/dwh/oraarch'
*.log_archive_format='DWH_%t_%s_%r.arc'
#*.memory_max_target=7226785792
*.memory_target=7226785792
*.open_cursors=1000
*.processes=500
*.remote_listener='LISTENERS_SCAN'
*.remote_login_passwordfile='exclusive'
*.sessions=555
DWH12.thread=2
DWH11.thread=1
DWH12.undo_tablespace='UNDOTBS2'
DWH11.undo_tablespace='UNDOTBS1'
SPFILE='/dborafiles/mdm_bn/dwh/oradata01/DWH/spfileDWH1.ora' # line added by Agent
[oracle@bnl11237dat01][DWH11]$ cat /etc/sysctl.conf
# Kernel sysctl configuration file for Red Hat Linux
# For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and
# sysctl.conf(5) for more details.
# Controls IP packet forwarding
net.ipv4.ip_forward = 0
# Controls source route verification
net.ipv4.conf.default.rp_filter = 1
# Do not accept source routing
net.ipv4.conf.default.accept_source_route = 0
# Controls the System Request debugging functionality of the kernel
kernel.sysrq = 0
# Controls whether core dumps will append the PID to the core filename
# Useful for debugging multi-threaded applications
kernel.core_uses_pid = 1
# Controls the use of TCP syncookies
net.ipv4.tcp_syncookies = 1
# Controls the maximum size of a message, in bytes
kernel.msgmnb = 65536
# Controls the default maxmimum size of a mesage queue
kernel.msgmax = 65536
# Controls the maximum shared segment size, in bytes
kernel.shmmax = 68719476736
# Controls the maximum number of shared memory segments, in pages
#kernel.shmall = 4294967296
kernel.shmall = 8250344
# Oracle kernel parameters
fs.aio-max-nr = 1048576
fs.file-max = 6815744
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
kernel.shmmax = 536870912
net.ipv4.ip_local_port_range = 9000 65500
net.core.rmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 1048586
net.ipv4.tcp_wmem = 262144 262144 262144
net.ipv4.tcp_rmem = 4194304 4194304 4194304
Please can I know how to resolve this error.CAUSE: User specified one or more of { db_cache_size , db_recycle_cache_size, db_keep_cache_size, db_nk_cache_size (where n is one of 2,4,8,16,32) } AND use_indirect_data_buffers is set to TRUE. This is illegal.
ACTION: Very Large Memory can only be enabled with the old (pre-Oracle_8.2) parameters -
I have a recently bought (22/01) B110 and it has setup easily, and connected to the network easily, but I cannot enable web services, it comes up with 'Server Connection Error' nothing else, I have also tried updating the firmware for the printer but it comes up with an identical message
This question was solved.
View Solution.Try these steps and check if printer connects to Web Services or not:
1) Turn OFF the wireless radio
2) Perform Restore Network defaults from the printer menu
3) Turn OFF the printer and unplug the power cable from the back. Wait for 5 min
4) Reconnect the power cable and turn ON the printer
5) Run the wireless setup wizard from the printer menu.
6) check if you are able to print and scan
7) "Remove Web Services" from the printer menu and wait for 2 minutes
8) "Enable Web Services" from the menu and wait.
This should print a page automatically.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution" -
I want to save some voice messages.
I want to permanently save some voice messages from my phone. I've been looking for an answer as to how I'm going to be able to do this. I want them saved on a different media so I can erase them off my phone.
The voice messages are proof for something. Will I be able to download them to a thumb drive or even into my email somehow?
I would appreciate any feedback.Are you using Verizon's voicemail system? If so, it will most likely cost you some money to have these messages saved.
From Verizon's voicemail help pages
"Can I have a permanent copy made of a Voice Mail message?Yes, permanent copies of your Voice Mail messages can be made in many ways but you can have CBW Productions, Inc. make a copy for you at a minimal fee. Go to CBW Productions and select the format you wish to use for your message archive. This is not a Verizon Wireless service and before any Voice Mail messages can be copied, you must register with CBW. If you do not have Internet access, you can contact CBW directly and place a phone order Monday through Thursday between 9am - 5pm EST and Friday 10am - 4pm at (800) 770-8046 or (877) 244-3222.Note: In order to have a copy of your message(s) made, you will be asked to provide CBW Productions, Inc. with your mobile phone number and Voice Mail password so they can access your mailbox. The message(s) you wish to have copied MUST still be present in your voice mailbox. If a message has already been deleted, it cannot be retrieved or copied. Your Voice Mail messages cannot be enhanced; therefore, any copies will be exactly what you hear in your mailbox; if the message that was left for you is garbled, the copy of the message will be as well. This archival service is not available for SMS (text) messages. CBW also provides Notary services for Voice Mail messages that are being archived.Back to top
How much does it cost to have a message copied?Messages saved as MP3 files and delivered via email*
Cost = $10.00 for the first message, and $5.00 for each additional message.
*Due to firewall restrictions, etc., there is a limit of 10 messages per mobile phone number, and no more than 10 minutes recording time, per month for MP3 delivery. Orders will be processed within five business days from the time that the order is placed, excluding weekends and all holidays.Messages saved to CD or cassette
From the time you place your order, your CD or cassette will be recorded and shipped to you within five business days, excluding weekends and all holidays.
Number of Messages
Cost
1-3
$18.00
4-6
$28.00
7-10
$38.00
11-21
$53.00
22
$58.00
Each additional message above 22 messages
$5.00
Additional Information:
All prices listed above include CD or cassette tape and do not include shipping. USPS First Class mail with Delivery Confirmation, USPS Priority Mail, USPS Express Mail & FedEx is available upon request and requires additional shipping charges.
There is no longer a limit on how many messages we can record for a customer.
Maximum recording time per cassette is 50 minutes; for CD is 60 minutes.
Message recordings in excess of 60 minutes will incur additional processing fees of $100 per hour (billed in 15-minute increments).
Notary letters = $20 per order (one notarized letter will be sent and will cover all messages archived as part of that order).
Rush service is available for an additional cost of $20.00 which will place your order to be the next in line to be recorded, rush delivery options are also available for an additional cost."
Of course, if you are using a different voicemail service such as Google Voice or Youmail, you can simply save the MP3 file.
Another option would be to use a jack going from your phone to your computer to record the voicemail as it is playing on your handset.
Good luck. -
Can't leave voice message. Error 13014 after deleting and recreating Lync account
I deleted a Lync 2010 account that I was having issues with and recreated it. Now when I try to leave a voice message I received a fast busy. In the Lync logs I see the following error:
ms-diagnostics
: 13014;reason="The routing rules did not result in a final response and callee is not enabled for Unified Messaging";
I've tried disabling and re-enabling UM but it doesn't work. Any idea how to resolve?Hi,
Did the issue happen only for the Lync account which you recreated before or also happen for multiple users?
Please check if you have assigned the correct number in Line URI in user settings.
Please also check if there any policy influence it.
You can refer to the link of “Lync Exchange UM Integration”:
http://blog.schertz.name/2010/11/lync-and-exchange-um-integration/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
P1102w cannot enable "HP WEB SERVICES" for sprintConnection error" check
I have a new printer which works fine for wifi printing but I'd like to use web printing which I beleive is called eprint.
I printed the configuration page and my firmware is 20120814
I cannot see were my printers email address is.
I navigated to the printers url and clicked on the tab "hp web services" and clicked on the green button enable but I keep getting the following error message.
"connection error: check internet connection"
From the router I can see that both the laptop and printer are on the same network 192.168.0.??
Can you please advise I suspect I have a fault on the printer but cannot be certain what can I do, I have updated the software on my mac which is running mavericks 10.9.2 , I've even hit the update software and there is no further updates available whch should mean I have the latest software and firmware for the printer.
Please advise how I may overcome the error when there clearly is no network issue as I can get to the printer to print and go to its web pages without any issues at all?Hi paz_egap,
Thank you for the thorough response, I appreciate it.
Since you have set a static ip with manual DNS servers and you are still cannot enabled the web services is the firmware up-to-date on the printer. Please follow the steps in Getting the Firmware and Product Updates. Once the firmware is current and the printer still has its manual ip address and manual DNS servers you should be okay to enabled the web services on the printer.
If you are still having an issue after completing the above please call HP’s Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you live outside the USA/Canada region please click here to find the Technical Support number for your country/region.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP -
HT1349 Cannot enable my sharing function. Error 5506
Cannot enable home sharing function. Used to work fine, now it does not. No changes have been made recently that might have caused this that I'm aware of. I have rebooted the computer, rebooted the network router, reset my Apple ID and password and turned Itunes off and on multiple times. I am trying to connect to my Apple TV. I am now getting an Error 5506 message. Any ideas?
You mean services.msc, and I cannot start this service, I have tried per above and failed. SSPD and UPNP start with out a hitch, however I get the error from event log with windows media sharing service:
Service 'WMPNetworkSvc' did not start correctly because QueryService encountered error '0x80070002'. In Windows Media Player, turn off media sharing, and then turn it back on.
Scouring the internet did not find much nor Technet... I used to be able to see network devices for sharing at one time... this has disappeared during one of the windows updates... I dont know when as I just hooked back up the 360. Any help on this would be appreciated. More info below:
Frendly view:
System
Provider
[ Name]
Microsoft-Windows-WMPNSS-Service
[ Guid]
{6A2DC7C1-930A-4FB5-BB44-80B30AEBED6C}
[ EventSourceName]
WMPNetworkSvc
EventID
14325
[ Qualifiers]
49165
Version
0
Level
2
Task
0
Opcode
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2008-12-21T00:15:47.000Z
EventRecordID
75284
Correlation
Execution
[ ProcessID]
0
[ ThreadID]
0
Channel
System
Computer
stormrunner-V
Security
EventData
ServiceName
WMPNetworkSvc
ErrorCode
0x80070002 -
Download error message - "Cannot Create File"
Recently I developed a problem and am unable to download anything (files, software, etc) from any website. I begin a download, the download manager comes up and it shows an error message "Cannot Create File." I am using the default manager that is incorporated in OS X 10.3.9.
I never had a problem until a week or so ago when I downloaded a software demo. I decided to get the full software package and trashed the demo files per the company's instructions. I got the error message when I tried to download the full program and now get the message no matter what I attempt to download. Might I have trashed a file I wasn't supposed to trash?
I tried installing 10.3.9 again on my main drive but still have the problem. If I use an external hard drive with spare copy of 10.3.9 and make that my start up drive, I can download files successfully.
Any help would be greatly appreciated.
Dave
2002 DP 1GH Quicksilver Mac OS X (10.3.9)Recently I developed a problem and am unable to
download anything (files, software, etc) from any
website. I begin a download, the download manager
comes up and it shows an error message "Cannot Create
File." I am using the default manager that is
incorporated in OS X 10.3.9.
I never had a problem until a week or so ago when I
downloaded a software demo. I decided to get the full
software package and trashed the demo files per the
company's instructions. I got the error message when
I tried to download the full program and now get the
message no matter what I attempt to download. Might I
have trashed a file I wasn't supposed to trash?
I tried installing 10.3.9 again on my main drive but
still have the problem. If I use an external hard
drive with spare copy of 10.3.9 and make that my
start up drive, I can download files successfully.
Any help would be greatly appreciated.
Dave
2002 DP 1GH
Quicksilver Mac OS X (10.3.9)
I have the same problem ! Not being able to download a file from the Adobe site. I need Reader 7 to download some files from exact exams but can't do it. Just keep getting the Cannot Creat File message in the download window. Can anyone help?
eMac 1.25 & G4 800 iBook Mac OS X (10.4.5)
eMac 1.25 & G4 800 iBook Mac OS X (10.4.5) -
Sun Cluster 3.2 - WARNING: Cannot enable monitoring on resource-group
clrg online -emM ora-1line-rg(C348385) WARNING: Cannot enable monitoring on resource ora-1line-rs because it already has monitoring enabled. To force the monitor to restart, disable monitoring using 'clresource unmonitor ora-1line-rs' and re-enable monitoring using 'clresource monitor ora-1line-rs'.
(logical host reference)
(C348385) WARNING: Cannot enable monitoring on resource ora-hastp-rs because it already has monitoring enabled. To force the monitor to restart, disable monitoring using 'clresource unmonitor ora-hastp-rs' and re-enable monitoring using 'clresource monitor ora-hastp-rs'.
(hastorageplus reference)
I am able to unmonitor and monitor the resources manually. What is the cause of these WARNING messages? This from Oracle and we have yet to complete the installation of HA-Oracle. Oracle is not installed and tnsnames.ora and listener.ora is not configured. Is this the reason? If so, could someone explain why you cannot online the resource group until after the application has been installed.
Thanks in advance,
RyanAs the manual says for clrs create:
By default, resources are created in the enabled state with monitoring enabled. so when you issue the clrg online -emM it is just simply warning you that these other resources weren't disable. Note they wouldn't have been started because the RG would have been offline.
Does that explain it? If not, ask more questions.
Tim
--- -
Bearts Audio Control Pannel will not open. Get error message cannot find startup file
Bearts Audio Control Pannel will not open. Get error message cannot find startup file!
Downloaded and instaled up-date for IDT audio from driver up-date. After installation could no longer oppen Beats Audio Control Pannel. Looked for download to re-install BEATS Audio but cannot find one.
Any suggestions.
Sound works with IDT driver installed.
Pavilion P7-1500ZHi,
Try using Recovery Manager to reinstall the IDT HD Audio Driver ( this will also reinstall the Beats Audio interface ) - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the document on the link below.
Recovery Manager - Windows 8.
Recovery Manager - Windows 7
After the reinstallation has completed, restart the PC.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
IMessage voice message is not active in iOS8
I am using an iPhone 6 and have read the previous question entitled "iMessage voice message is not active in iOS8" and applied the suggestions but it has not corrected my problem. I made sure iMessage was turned on in my settings/Messages. I made sure my called phone number was also an iPhone 6 with the same iMessage turned on in similar fashion. Both phones are identified as iPhones in contacts with the phone numbers but I don't believe that has anything to do with the issue cause it sometimes works fine with phones defined as mobile. I am current on IOS8.02.
Thanks for your information. That really gives me some hints to figure out what's going on of my iMessage.
OK, here is my trial test after all the replied suggestions above.
(1) It seems the voice/video memo function will be ONLY enabled automatically when sender and receiver are all iPhone(iMessage app) users.
(2) In my case, if I choose a receiver who is a iPhone user too, then the voice/video memo function button is working nicely.
(3) The receiver doesn't need to run iOS 8. I have tried iOS 6 iOS 7 friends, there is no problems at all.
(4) In conclusion, you have to find another iPhone user to experience new function just like the same requirement of Facetime.
Problem solved , I hope my question could help other confused user as well. -
"User" Library in the FontBook is "Off" and I cannot enable it. Help!
Few weeks ago I decided to speed up my new Mac little bit by turning all fonts in the "User" Library "Off". Yesterday I needed some fonts which are in the User library, so I opened FontBook and tried to enable "User" library, but I could not. I cannot enable it anymore. I can click on "Enable "User"", but nothing changes. It remains with the "Off" label, and shows no fonts in it, while in reality there are 50 fonts there (~/Library/Fonts). Any ideas how to enable it again? Please help. Thanks in advance!
Guntis Bukalders:
Unless you have a good reason for having FileVault turned on, I suggest you turn it off. I can cause a lot of grief i get a bit too much on our HDD. It utilizes your HDD space for a sparse image approximately the size of your Users Folder.
Is there a reason why you wanted it turned Font Book off?
I enabling User in the Edit menu doesn't do it try this. Shut down your computer completely. Then try starting up in Safe Mode, log in, empty Trash, retart computer and log in normally. Open Font Book and try enabling user again.
Good luck.
cornelius
Message was edited by: cornelius -
When I dial the number of a friend I get the voice message "The service cannot be connected". What does this mean - a fault on the line or something else. I don't get the number unobtainable tone.
PeterSounds like a SKY Talk problem:
http://www.skyuser.co.uk/forum/sky-talk/22519-service-can-not-connected.html
toekneem
http://www.no2nuisancecalls.net
(EASBF)
Maybe you are looking for
-
When I used Tiger (OS 10.4), I found a way to color code calendar events according to categories set up in my Address Book (eg Business-related events were green, Family-related events were purple, Persona-related events were blue, etc.), allowing me
-
My MacBook won't connect to the Internet, but it's connected to my router. When I go to network preferences, it says that it has a self assigned ip address, and can't connect to the Internet. How can I fix this? Please help!
-
How can i move all the music from my playlist on my ipod onto...
OK, I have a 4G 20GB ipod that has reached its capacity...I have upgraded to the 5G 60GB video...I want to move my entire playlist from my old ipod onto the new one. I tried to click and carry the playlist onto the itunes playlist but I cannot?
-
Multivalued parameter in SSRS 2012
I am designing a report using SSRS 2012. I want to pass multiple transactions id to the report as parameter. In the report i have declared @tranid as parameter and set "Allow multiple values" checked. So how to pass more than one transactions ids thr
-
When trying to create a book the book goes to Album, I don't seem to have a project folder in iPhoto, any suggestions?