Void check - amount and issue date

We do FCHX check extract to send the positive pay files to Bank. With FCHX, the issue date and amount is not getting extracted for voided checks. How can we populate these values (issue date and amount) in the file extract (FCHX) for check
The data in the file is sorted according to account number and check number and its format corresponds to the internal format of the DTACHKH and DTACHKP structures.
Thanks
Ron
Edited by: Ron on Mar 10, 2010 1:53 AM

Hi,
We can void a issued check and also unissued check.
For unissued check, there will not be any amount and issue date. So no porbs.
For the the issued scenario, bank just need infomration about the voided check number only, irrespective of amounts and issue date as per the standard practise is concerned.
May be this information will not be useful to you...just to confirm...
Thanks,
Srinu

Similar Messages

Dispute Amount and Dispute Date

Hi All
I am actually looking for Dispute amount and dispute date fields in BI AR .
Can somebody please let me know the exact fields for these two in concerned AR BI table?
Regds
Mano

Hi
Thanks for your reply , yes i am not able to find out them as you said.
Are these fields not a standard AR fields in BI apps tables? I found out that the table in BI is W_AR_XACT_F , but unable to locate these columns within that.
Can you please help me out on the same?
Regds
Mano

SAP Inter company PO Checking rule and commitment date

Hello there,
I am trying to understand the commitment Qty and commitment Date on the NB type PO between two different plants.
I have a setup where my Plant1 buys from Plant2 and Plant1 takes 100 days to get it from Plant2.
Plant2 will source it from Vendor1 and takes 200 days for the Vendor1 to supply to Plant2.
Plant 2 does not have any stock today, the stock from Vendor 1 will arrive only on 6/10/2015, there is an Open PO for Vendor2 for GR will be done on 6/10/2015. So on 6/10/2015, there will be a stock of 2500 units.
No other requirement exists in MD04 for this material in Plant 2.
Plant1 is raising a PO for Vendor Plant2 on 3/27/2015 for 1000 units. The planned delivery date is 100 days on Plant1 Material Master. So the delivery day is shown on PO is 100 days from now which is 7/5/2015.
Considering the fact that Plant2 is receiving 2500 on 6/10/2015, why wont SAP commit to the Qty. When I do the availability check, it does not consider the 2500 units coming in from PO and from CO09. The checking rule does not consider the Purchase Order Qty.
Now, here is where I need clarification.
The checking rule says not to consider Purchase Order in the in/out movement, So when I play around with this check I was able to commit the Qty on the PO. When I take out the check it will not commit the Qty and puts the commitment date based on the Plant 2 planned delivery time ( the time Plant 2 takes to buy it from the supplier).
It makes sense so far, however when excluding Purchase order to be considered for my purchase order availability check and when I remove the 200 days from Plant2 material masters planned delivery date and then create a purchase order, my PO is committing the QTY, how is this explained? or am i having some bad setup somewhere.
Same exact checking rule i.e excluding purchase order, everything else constant.
Scenario 1: Qty committed on PO when Planned Delivery time on Plant2 is zero days
Scenario 2: Qty not committed on PO when Planned Delivery time on Plant2 is 200 days
Can someone assist me to understand this. thank you

Anyone thoughts? thanks

OSS notes for MB1B in checking Amount and Quantity depending on the mat. #

Dear All:
Where can i download OSS notes in MB1B for checking the amount and quantity depending on the material number?
Thanks,
CHOCO

Hi ,
We are not getting what you mean to say.
But as far my understanding of your query I am giving the reply.
OSS notes can be download at the tcode SNOTE.
Pls go to the tcode SNOTE-> GOTO ->DOWNLOAD SAP NOTE.
here you need to give the sap note number.
To get this number you first need to search in service.sap.com and find the relevant note that is useful for ur scenario.
And after finding that note and we need to give this number in SNOTE tcode and we need to download.
Pls tell me your requirement clearly so that i will try to find a oss note for you.
Pls get back to us for further assistance . Happy to help you.
Regards,
Viveks

Incorrect amount and capitalization date in the depreciation simulation

Dear SAP Masters,
I am getting a strange problem at my client's place while we are doing the depreciation simulation for Investment orders.
when we run this transaction to get the depreciation amount for a investment order we are getting a monthly depreciation amount of 446.72$and the capitalization date as 01/01/2008.
but the capitalization date for that order in KO04 is 07/25/2007 and the total project amount is 181500$. but the users are saying the capitalization should be 07/25/2007 and the depreciation for monthly should be 3025$ (181500/60months) because the useful life is for 5 years. I am not sure how it will calculate the deprecition as i am new to this area. They are saying they have no issues running this transaction for fixed assets but only for open investment order and the same time it is not consistent with the all the orders. I would like to know how the system is taking the information for running the report and uderstand the root cause of the error.
Any help will be truely appreciated.
Kind regards
Leoni

yes it is a temp table but the 2nd error is triggered after reading this temp table T7INREIM_TRNSDT in the include LHRPBSINCLAIMS_UTILSF01.
Also, this check occurs only if the Adv Claim is Tax-Exempt.
Is there a flag/checkbox that says 'On Actuals'?
The 1st error is getting triggered from the include LHRPBSINNEWCLAIMSF07 in the backend..You can put an external breakpoint & debug your claim.. that should help you resolve the issue.
And, yes the date check occurs only when the claim is LTC specifc.
all the validations are done in the the function call to HRXSS_IN_CL_REQ_VALIDATION.
~Suresh
Edited by: Suresh Datti on May 19, 2010 3:16 PM

APP-AR-12022: A cash receipt with this number,date,amount and customer alre

Hi,
There is a caution(Warning message) of Duplicate receipt entery in Oracle AR Receipts entry window which pops up while creating the receipts.
APP-AR-12022: A cash receipt with this number,date,amount and customer already exists.
Normally it comes when we enter similar receipt number, net receipt amount and receipt date towice.
Is it possible to customize the criteria for this caution.
Thanks.

You cannot customise this. If you want additional validation at the time of entry/update from forms, you can code special logic in custom pll. But you cannot change the standard functionality.

Incorrect goods issue date

Hi All,
When we run availabilty check, the goods issue date falls on non-working days. We have used Enhancement APOSC002 in APO system to populate shipping calender.
Any suggestions please.
Thanks,
Krishna

> I have maintained goods issue date in delivery and am creating an invoice for the same delivery, when an idoc is getting triggered am not getting goods issue date in invoice idoc the qualifier would be 035..has anyone come across this issue, all the help will be highly appreciated and rewarded..
Maybe, you can use custom function exit to transfer date to Idoc? Have you looked at this note: [Note 127178 - Questions about user exits in IDoc INVOIC01 (FI)|https://service.sap.com/sap/support/notes/127178]
Regards,
Jakub

Compress and uncompress data size

Hi,
I have checked total used size from dba_segments, but I need to check compress and uncompress data size separately.
DB is 10.2.0.4.

I have checked total used size from dba_segments, but I need to check compress and uncompress data size separately.
DB is 10.2.0.4.
Unless you have actually performed any BULK inserts of data then NONE of your data is compressed.
You haven't posted ANYTHING that suggests that ANY of your data might be compressed. For 10G compression will only be performed on NEW data and ONLY when that data is inserted using BULK INSERTS. See this white paper:
http://www.oracle.com/technetwork/database/options/partitioning/twp-data-compression-10gr2-0505-128172.pdf
However, data, which is modified without using bulk insertion or bulk loading techniques will not be compressed
1. Who compressed the data?
2. How was it compressed?
3. Have you actually performed any BULK INSERTS of data?
SB already gave you the answer - if data is currently 'uncompressed' it will NOT have a 'compressed size'. And if data is currently 'compressed' it will NOT have an 'uncompressed size'.
Now our management wants that how much compressed data size is and how much uncompressed data size is?
1. Did that 'management' approve the use of compression?
2. Did 'management' review the tests that were performed BEFORE compression was done? Those tests would have reported the expected compression and any expected DML performance changes that compression might cause.
The time for testing the possible benefits of compression are BEFORE you actually implement it. Shame on management if they did not do that testing already.

How to avoid the Amount and Date values for VOID Cheques

Hi All,
I had created a two window i.e For Amount and Date. If I process the cheque the Amount value and Date should not trigger for VOID CHEQUES.
Can any one tel me how to avoid the Amount and Date values for VOID Cheques
Your help will be greatly appreciated.
Regards
Yathish

Hi,
I dont know which tablel you are referring to, is it PAYR table and the field VOIDR?
If a cheque is voided, it would have a reason and it is stored in VOIDR field of this PAYR table.
Check if the field VOIDR is filled, if it is filled, do not print the amount and date.
Regards
Subramanian

Rffous_c--amount and date is coming in a diffrent format

Hi all,
i am executing RFFOUS_C, which calls a sap script (customized) to print the data. It is for US. But when i see the output of the sap script, for one employee it is showing some diffrent amount and date format.
the date for other employees is comming as 01/19/2007 whereas for one employee it is 01.19.2007. and also amount coming as 62.345,00 instead of 62,345.00. when i checked in the system the land1 field from REGUH is US and for this employee it is HK.

Hi,
Were you able to solve it.Because we also have similar requirement and i understand that the amount and date format depends on receipent country. But the customer doesn't want to change the country settings and want this format in issuing country format.
Your help would be highly appreciable.
Thanks

Check price and availability shows no data

Dear Experts,
In the Check price and availability app, im trying to check the availability of a material on a particular date.
Issue 1:
The available stock quantity for material 953 is 260. There is no availability check maintained in material master(KP- no check)
Say for eg, 29th may and quantity as 10 items for material 953, the app displays data as below. How is the estimated delivery date calculated as i ahve not maintained any planned delivery date in MMR.
But when i check for this material 953 or 954 or 2390 or any other material for date 27th may or 29th may, it says stock is not available though the
physical stock is listed for 260 pcs as below.
Issue 2:
The available stock of material 953 is only 260. when I check for 1000 quantities on 30th May, the system must say, stock is not available
But however the app displays stock is available with the estimated delivery date. Im unable to find the cause of this output.
Please guide me how to sort the issue.
Please help as this issue is urgent.
Thanks & Regards
Dhinesh
Message was edited by: Michael Appleby

Hi Dhinesh
I am Also facing this problem from long back. And we updated all the Patch level but i didnt get the solution.
Please Share the Info if you find the Solution for this issue.
Regards
Prasanth SV

How to fetch post goods issue date and sales order creation date

Hi All,
How to find out the difference between SD Sales Order Item Creation Date and final Post goods issue Date. I would like to know how to fetch those dates and what is the relationship between the tables from which i will get the dates.
Please let me know the solution .
Thanks in advance.

Hi,
Sales order creation date is when u raise a sales order in favor of the customer using VA01.......using ATP logic system purposes the material availability date....
after saving ur sales order...when u raise the Delivery using VL01n w.r.t to OR...than u have to perform picking ....In the picking Tab...specify the amount to be picked than press Post Good Issue....means the goods left the company premises ..
You can the fetch the values using tables- Use T code SE12 or SE16
Vbak-----order header
Vbap-----order item
Vbek-----order schedule line
Likp-----Delivery header
Lips----Delivery item

Want to change Del Date and Goods Issue date in Delivery scdl tab of PO

Hi Gurus,
I am in a situation wherein i need to change the Goods Issue date in Delivery schedule tab of Purchase Order and make it equivalent to Delivery date in the same tab.
Currently the Goods issue date that is taken by default will always be one day after the Delivery date.
Where is the control for this???
Regards,
Trishul

Hi Jürgen,
Thanks for your response. You are right. The Process is STO.
The delivery has not been created as yet. Everything is happening while creating the PO. The settings are such that the delivery date will be taken by the system automatically by doing the Availability check and simultaneously the goods issue date will be updated. But it will be one day later to the delivery date. But i want this to be same.
Incase if i change the Goods Issue date manually, this is the message i get "Goods issue cannot be carried out in the past"
Message no. V1062
Please let me know if i am not clear.
Regards,
Trishul
Edited by: Trishul Das on Mar 17, 2009 4:09 PM

I need to find out how much wifi data my apps are using. I have a very limited amount of wifi data, and I am exceeding my monthly allowance. Apparently, even apps I think are not open are sending/receiving data through the wifi and using up my allowance.

I need to find out how much wifi data my apps are using. I am on a very limited amount of WiFi data each month, which I am regularly exceeding. I have been told to work out which of my apps is using the data. Also, I think I have closed an app by double clicking the home button, then swiping the app up - is this the way to close it, or will it still be sending/receiving data?

Go into your Settings : General : and turn off background refresh for your apps. In Settings : Mail turn Fetch new data to OFF and Load Remote Images to OFF. This will mean that Mail will only check for messages when you actually use it, and all your advertising junk mail won't have all the images in it.
Turn off push notifications every chance you get.
Make sure you are actually quitting apps: to quit apps press the Home button twice and you should see a bunch of smaller screen images for every open app. To quit the app swipe from the screen image (not the icon) upward off the top of the iPad. You can swipe left and right to see more open apps, but there must be no left-right movement on the screen when you swipe upward to close the app.
Turn off your internet connection when you do not need it. The easiest way to do this is to swipe up from the bottom of you screen to get the control centre, and then touch the airplane to turn on airplane mode. You can repeat this sequence to turn it back on again when you need it. Most especially turn airplane mode on whenever you are sleeping your iPad for long periods. This will save battery life too. OR actually turn your iPad off - which means holding the power key down for several seconds until the red swipe bar appears, and then swipe to turn it off. If you go this route, note that it will take longer to turn on then it takes to wake from sleep.

Creating refunds in CR&B and issuing the check in Accounts Payable (ERP)

Hi experts-
I'm on an implementation project where ERP and CR&B are being put in place, both being on the same SAP instance/ box. The current refund process calls for generating refunds on the customers' contract accounts in CR&B and issuing the checks out of AP. The check memo field is to include the customer's name, Contract Account # ,and service address.
Is there a standard SAP process to accommodate for this requirement? If not, what custom program or interface could satisfy the requirement?
I'd like to hear if anyone has done anything similar and what successful approach was followed.
Thanks,
MD
Moderator note - thread locked, no research - duplicate of Creating a refund request in CCS and printing that refund check FI-AP
Edited by: William Eastman on Apr 26, 2011 5:24 PM

1. Take List of all applied Invoices of the Payment
2. Check the status of those invoices. Each one of them should be in status 'Accounted'
3. If not,Identify the problem with the Invoice and Clear that. The problem may be Invoice adjustment(adj to Paid invoices allowed).
4. Try running Create Accounting again.
5. If the problem persists still, it conveys us that the Transactions were struck in loop and can be resolved only by using UPDATE command.
6. Contact Oracle for Data fix
Regards,
Sridhar

Void check - amount and issue date

Similar Messages

Maybe you are looking for