Incorrect amount and capitalization date in the depreciation simulation

Dear SAP Masters,
I am getting a strange problem at my client's place while we are doing the depreciation simulation for Investment orders.
when we run this transaction to get the depreciation amount for a investment order we are getting a monthly depreciation amount of 446.72$and the capitalization date as 01/01/2008.
but the capitalization date for that order in KO04 is 07/25/2007 and the total project amount is 181500$. but the users are saying the capitalization should be 07/25/2007 and the depreciation for monthly should be 3025$ (181500/60months) because the useful life is for 5 years. I am not sure how it will calculate the deprecition as i am new to this area. They are saying they have no issues running this transaction for fixed assets but only for open investment order and the same time it is not consistent with the all the orders. I would like to know how the system is taking the information for running the report and uderstand the root cause of the error.
Any help will be truely appreciated.
Kind regards
Leoni

yes it is a temp table but the 2nd error is triggered after reading this temp table T7INREIM_TRNSDT in the include LHRPBSINCLAIMS_UTILSF01.
Also, this check occurs only if the Adv Claim is Tax-Exempt.
Is there a flag/checkbox that says 'On Actuals'?
The 1st error is getting triggered from the include LHRPBSINNEWCLAIMSF07 in the backend..You can put an external breakpoint & debug your claim.. that should help you resolve the issue.
And, yes the date check occurs only when the claim is LTC specifc.
all the validations are done in the the function call to HRXSS_IN_CL_REQ_VALIDATION.
~Suresh
Edited by: Suresh Datti on May 19, 2010 3:16 PM

Similar Messages

Dispute Amount and Dispute Date

Hi All
I am actually looking for Dispute amount and dispute date fields in BI AR .
Can somebody please let me know the exact fields for these two in concerned AR BI table?
Regds
Mano

Hi
Thanks for your reply , yes i am not able to find out them as you said.
Are these fields not a standard AR fields in BI apps tables? I found out that the table in BI is W_AR_XACT_F , but unable to locate these columns within that.
Can you please help me out on the same?
Regds
Mano

Void check - amount and issue date

We do FCHX check extract to send the positive pay files to Bank. With FCHX, the issue date and amount is not getting extracted for voided checks. How can we populate these values (issue date and amount) in the file extract (FCHX) for check
The data in the file is sorted according to account number and check number and its format corresponds to the internal format of the DTACHKH and DTACHKP structures.
Thanks
Ron
Edited by: Ron on Mar 10, 2010 1:53 AM

Hi,
We can void a issued check and also unissued check.
For unissued check, there will not be any amount and issue date. So no porbs.
For the the issued scenario, bank just need infomration about the voided check number only, irrespective of amounts and issue date as per the standard practise is concerned.
May be this information will not be useful to you...just to confirm...
Thanks,
Srinu

How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interruption.

I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
Thank you in advance.
Regards,
Attachments:
HP8563E_Query_Amplitude.vi ‏37 KB

Hi,
Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
So I want to acquire 1 time amplitude from spectrum analyser each 5
period of the signal that I am acquiring from parallel port.
So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
Here is a new algorithm.
1) i=0 (counter: number of period)
2) I read value from In Port
3) If I acquire a period
i= i+1 (another period)
4) If i is multiple of 5 (If I read 5 period)
acquire 1 time amplitude and write to the same
file this amplitude and the corresponding distance
Distance = 12*i). Remember each period of signal
Corresponds to 12 Inches).i has to take these
values: 5,10,15,20,25,35,40,45,50,55,60............
5) Back to 2 if not stop.
Thank you very much for helping me.
Regards,
Attachments:
Acquire_Amplitude_00.vi ‏59 KB
Figure_Algorithm.doc ‏26 KB

My iPhone 5 has broken and is being replaced with a new iPhone tomorrow. However, My carrier (orange) will b picking up my broken iPhone and I am unsure how to secure the content and icloud data on the broken phone. Is there a way to display the data?

My iPhone 5 has broken and is being replaced with a new iPhone tomorrow. However, My carrier (orange) will b picking up my broken iPhone and I am unsure how to secure the content and icloud data on the broken phone. Is there a way to disable the data held on it and ensure that if it is fixed, nobody can use/see my data and access my account?

Hi Gazpan,
Thanks for visiting Apple Support Communities.
I recommend using the steps in this article to back up your iPhone if possible:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
You may also find this advice helpful for your situation:
What to do before selling or giving away your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht5661
If you no longer have your iOS device
If you're using iCloud and Find My iPhone on the device, you can erase the device remotely and remove it from your account by signing in to icloud.com/find, selecting the device, and clicking Erase. When the device has been erased, click Remove from Account.
If you're unable to complete either of the above steps, you should change your Apple ID password. Changing your password won't remove any personal information that is cached on the device, but it will make sure that the new owner can't delete your information from iCloud.
Cheers,
Jeremy

When I try to sync photos, I followed all the steps, picked one folder. When I hit "apply" I get this error message: Are you sure you want to remove 30 apps from iPad. This will delete these apps and their data from the iPad. What have I done wrong

When I try to sync photos or music, I followed all the steps, picked onle folder, not the whole library. When I hit "apply" I got this message:
Are you sure you want to remove 30 apps from iPad. This will delete these apps and their data from the iPad" What can I change to just download the photos and not interfere with the apps?
(By the way, the memory is not even one quarter full)
Thanks for your help - Pat

I have the same problem. I updated my mac to 10.5, which then had me update apps like itunes, etc. then it wanted me to sync my purchased music to my ipad before i updated the ipad...which worked ok. then when i was syncing the photos i got the same message when i hit "apply" asking are you sure you want to delete the 12 apps from the ipad - clicked "no" and brought me back to the original screen. Got the same message when trying to move them from the hard drive to the ipad. WHat is going on and how do I correct this? Thanks

From and To Date in the report

Hello friends,
               Can we display the From Date and TO Date in the report heading (not in the column) which is entered by the User.

hi,
    Hey u use Replacement path variable for this.
    in the new selection which u have created while writing the description/name of it use the replacement patgh variable and u will get the user entered dfates.
eg.
purchases &Replacement_path_variable&
then the column heading would be
purchases Mar 2008.
regards,
VJ

OSS notes for MB1B in checking Amount and Quantity depending on the mat. #

Dear All:
Where can i download OSS notes in MB1B for checking the amount and quantity depending on the material number?
Thanks,
CHOCO

Hi ,
We are not getting what you mean to say.
But as far my understanding of your query I am giving the reply.
OSS notes can be download at the tcode SNOTE.
Pls go to the tcode SNOTE-> GOTO ->DOWNLOAD SAP NOTE.
here you need to give the sap note number.
To get this number you first need to search in service.sap.com and find the relevant note that is useful for ur scenario.
And after finding that note and we need to give this number in SNOTE tcode and we need to download.
Pls tell me your requirement clearly so that i will try to find a oss note for you.
Pls get back to us for further assistance . Happy to help you.
Regards,
Viveks

Getting the start and end dates of the week

Hi,
I was stuck with a problem in getting the start date and end date of the week,i know the month ,week and year also,with these three values how can i get the start and end dates of a week.please help me
Thanks

There is no simple way. It has to be a math calculation.
There are several ways you can get the dates. First you have to know what day is January 1st and what day is december 31st for a particular year. Second you have to check whether the given year is a leap year or not. Based on the abvove information you should be able to find out what day is a particular date.
Hope this helps to get you started.
- Venkat Dhurjati.

Adding a summary column in a table which contains the start and end dates in the week

Hi,
I've got a DIMENSION DATE table and want to add in another column which shows the start and end date of the week.
See below, the new column is WEEKOFYEARTEXT.
Does anybody know how i may generate this column using SQL and using the existing columns?
Umar Javed

See: http://www.sqlusa.com/bestpractices/datetimeconversion/
DECLARE @Year INT = '2015';
WITH cteDays AS (SELECT DayOfYear=Dateadd(dd, number,
CONVERT(DATE, CONVERT(char(4),@Year)+'0101'))
FROM master.dbo.spt_values WHERE type='P'),
CTE AS (SELECT DayOfYear, WeekOfYear=DATEPART(week,DayOfYear)
FROM cteDays WHERE YEAR(DayOfYear)= @YEAR)
SELECT WeekOfYear, StartOfWeek=MIN(DayOfYear), EndOfWeek=MAX(DayOfYear)
FROM CTE GROUP BY WeekOfYear ORDER BY WeekOfYear;
WeekOfYear StartOfWeek EndOfWeek
1 2015-01-01 2015-01-03
2 2015-01-04 2015-01-10
3 2015-01-11 2015-01-17
4 2015-01-18 2015-01-24
5 2015-01-25 2015-01-31
6 2015-02-01 2015-02-07
7 2015-02-08 2015-02-14
8 2015-02-15 2015-02-21
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014

I have a new computer. I've installed iTunes. I don't want to lose the calendar and contact data nor the apps currently on my iPod Touch. Will that happen when I sync?

I have a new computer. I've installed iTunes. I don't want to lose the calendar and contact data nor the apps currently on my iPod Touch. Will that happen when I sync?

I don't think so. When you open iTunes, go to "Store" on the top and click "Authorize this Computer." Type in your email and pass, and click authorize. Then, when you connect you iPod for the first time, it should tell you "this iPod is synced with another computer, blah blah." It should give you the option to either "Erase and Sync," or "Transfer Purchases." Click "Transfer Purchases and your content should go into your new iTunes.
If this doesn't work and you still have your old computer there's another thing you can do. I know this works on windows, but I'm not sure how to do it on a Mac, maybe someone can offer some help. Assuming you have Windows, go to Start>Music>iTunes Media and you should see Music, Apps, Movies, etc. This is all the stuff in your iTunes. If you have an external hard drive or your iTunes library is small in terms of file size, you can do this in one go. Transfer the content (as much as you can fit at one time) onto the external storage. Then, put that content on your new computer on the desktop or somewhere where you can find it again. Open iTunes, and folder by folder highlight everything in the folder and drag it into the iTunes library. It should say "importing (content)" or something and then it should be in your library. If you look in your Music folder again, there should now be another "iTunes" folder there with all of your content back in it.
Hope one if these options works for you. Best of luck!

When Adobe Formscentral retires can we still send the forms to our customers and recieve data on the response to export to excel

When Adobe Formscentral retires can we still send the forms to our customers and receive data on the response to export to excel?

Hello,
Unfortunately, after the retirement of Adobe FormsCentral; you will not able to send and receive responses.
Please visit the following link for more information:- End of support | Adobe FormsCentral
Regards,
Nakul

How to get starting date and ending date of the given Fiscal Period

Hi Friends,
In my Selection screen parameter, I've Fiscal year and Period , I want to get the starting date and ending date with the Fiscal period.
How to get and throught which FM.
Pls advise.
thanks&regards
Sankar.

Hello Sankar,
Check the FM PERIOD_DAY_DETERMINE.
DATA :
         l_periv     TYPE periv,
         l_blart     TYPE blart,
         l_fday     TYPE bkpf-budat,      "First day in period
         l_lday     TYPE bkpf-budat.      "Last day in period
* Fetch the fiscal year variant from T001
SELECT SINGLE periv INTO TABLE l_periv
FROM t001
WHERE bukrs EQ p_bukrs.
* Get first day/last day
      CALL FUNCTION 'PERIOD_DAY_DETERMINE'
        EXPORTING
          i_gjahr              = p_gjahr
          i_monat              = p_monat
          i_periv              = l_periv
        IMPORTING
          e_fday               = l_fday
          e_lday               = l_lday
        EXCEPTIONS
          error_period         = 1
          error_period_version = 2
          firstday_not_defined = 3
          period_not_defined   = 4
          year_invalid         = 5
          OTHERS               = 6.
Hope this helps.
BR,
Suhas
Edited by: Suhas Saha on Jan 9, 2009 2:08 PM

I want to communicate and acquire data using the PC Parallel Port.

How do I to communicate and acquire data from the PC Parallel Port using Labview.
Thank you in advance.

One of the easiest ways is to use the INPORT and OUTPORT VIs. Find what port your parallel port is in and then send data to/receive data from that port. For more information on the port itself, try: http://www.lvr.com/parport.htm#Basics. If you are using NT (I heard some of the other new OS's have the same problem) then you need to download accessHW.zip from the NI site.
Rob

Phone is connecting and transfering data in the ba...

Today at work my Nokia 6710 did start to transfer data in the background without my interaction. I was typing a sms while the symbol for data transfer below the 3G lit up. Did a quick check in the menu->settings->connectivity->Conn.mgr. Yes, one active connection was sending and receiving data, small amounts 3-4kb, then idle.
I ended the connection in the Conn.mgr. Closed all the apps in the phone and waited a minute. Then it started one new connection in the background again! Same procedure, checked and closed it...! This did not stop, every time the phone started a new connection after a minute?
I did try to find what could cause this, but no success. What is going on, any ideas for what to check?
I finally deleted my 3G access point in menu->settings->settings->connection->destinations->internet
This did stopp the phone from connecting and transfering data.
Back home I connected to my WiFi at home, used the browser and closed the connection. Guess what, the phone did now connect via the WiFi in the background doing exactly the same type of small data transfer - without asking!?
What is this? I downloaded the latest F-Secure mobile version to check for virus, but nothing, it was clean.
I did shut down the phone, will not use it until I can stop these unwanted connections and transfers. Please help.

Finally I found the reason for these data transfers. The upgrade of the mentioned files did have something to do with all of this, but the removal of the files did not help.
So, I did go through all the settings in again for Connections and the setting for Share Video were set On...? Turning this setting Off did stop the background data transfers.
Problem solved perhaps. But I still wonder why the Share Video setting did start sending data while the phone was not in use? A bug? A virus? A hacker trying to activate the webcam?

Incorrect amount and capitalization date in the depreciation simulation

Similar Messages

Maybe you are looking for