Volume and sounds

Hi.. Just want to ask, what if my iphone4 volume button is not working and when i listen to music and watch videos theres no sounds at all but when im having an incoming call, it has sounds.. Is it harware or software problem?

Using the phone for a few days seems to have solved the low volume issues.

Similar Messages

  • Mac Volume and Sound Problem in newly installed Windows

    Hi Friends,
    I intalled the Windows 8 Developer Edition using Bootcamp 4.0
    My Mac Volume/Hard Disk is not displayed in "My Computer". I read it will display the Volume in read-only mode. Can anyone help in making the Volume show on Windows?
    The sound is also not working. Any work-around?
    Thank you.
    Regards,
    Ragu

    You are familiar with beta testing? Ever?
    It is ah, "normal" for audio to not work on Mac running Windows until YOU install an audio driver.
    AppleHFS.sys and AppleMNT.sys were buggy with Windows 7 3.0 and 3.1
    If you want, see what Paragon HFS 9.5 $19 and ask Paragon-Software about whether you can beta test their HFS driver.
    Their CampTune 9.5 was just updated to support Lion.
    I would also call Lion 7.1 still in the "early" stage and not fully ready - give it a couple updates like every other OS X release - in the 'final candidate+' stage too. The Boot Camp 4 drivers for Windows are better now than they were in July but still some rough spots and things missing.
    And there was a firmware update for the MBP just this week, and that model has been through 3-4 minor chip revisions to the motherboards, some of which deas with support and bugs with SATA 3 affecting SSD support.

  • Fluctuating volume and sound quality?

    Windows 7.  HP Pavilion Entertainment PC.  Bose speaker system.  Sound seems fine through the iPod Nano and Bose speakers, but fluctuates and seems weirdly compressed through iTunes on the laptop.  Don't remember it ever being that way.  New version of iTunes to blame?  Virus?

    Hello there,
    It sounds like your iTunes volume not functioning correctly when playing through your speakers, but your iPod Nano seems to work just fine with it. I would first check the equalizer to see if it is set to something unexpected in iTunes with this article and verify that your audio is set up correctly:
    iTunes 11 for Windows: Adjust the sound quality
    http://support.apple.com/kb/PH12334
    If the issue persists or that is not the cause of it, I would next use the folliwng to help troubleshoot audio playback in iTunes on Windows:
    iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
    http://support.apple.com/kb/ts1362
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • When Charging my Iphone 5's volume and sound goes away

    Sometimes it will come back, but usually the option for volume changes go away.

    Howdy kimckay,
    I found a resource to help troubleshoot what may be going on with the camera. Its from our article named iPhone: Hardware troubleshooting found here http://support.apple.com/kb/ts2802.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Third-party cases can interfere with the autofocus/exposure feature and the flash (iPhone 4 only); try removing the case if you have image-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    And
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    If the issue still persists then I would recommend backing up and restoring the iPhone. If the previous troubleshooting does not resolve it, then this will if it is a software issue.
    All the very best,
    Sterling

  • I have lost all volume and sound from my iPhone 4S, even tho its on loud and I have checked all my settings. How do I get the volume and sound back on?

    I have done all checks, rebooted my phone but I hVe lost all sound from it. When i play videos/ music... My key sounds have gone everything!
    I've checked my settings they are all set to loud... What else can I do?

    After wiping it, you need to re-activate it. If it is carrier locked, you will need to activate it on the network it is locked to.

  • I love my iPhone and have had it for 2 yrs. but since late Wednesday night my volume and sound have not worked. After visiting 2 different stores 4 times, apple store and calling 6 times I have been told verizon was down and would be contacted but haven't

    why is this?

    First you must send a follow request to the Verizon rep. They must approve it. They must also send you a follow request which you must approve. At that time, you can send a DM to the rep.
    With that said, I am not sure who you should send the follow request to. The signature at the bottom of the rep's message says michelleh_vzw yet the userid of the post says yoseft_vzw.
    I suppose I would try sending one to michelleh_vzw first since they signed the post. You can do that by hovering your cursor over their userid which I have included in this post and clicking on the "Follow" button in the dialogue box which opens up while you are hovering the cursor over the userid. Then you can only wait for them to respond before you can do anything else.

  • PSA: in iOS 7.1.1, alert sounds are tied to your media/game volume and not to your ringer volume

    I was befuddled by this for a long time.
    Alert sounds would just stop making noise.  This includes dings from txt messages and new mail.
    If I went to Settings>Sounds>Text Tone and select several options, all I would get were vibrations.
    I rebooted the phone and toggled the silence switch on and off.
    I finally figured out that if I started a game and turned the volume up, the noises would come back.
    I think it is reasonable for a user to wish to play a game on mute but still hear alert messages. 
    I think if we can only have two separate systems for audio control, the alert sounds should be tied to the ringer, not to the media/game sounds.
    When I spoke to an apple support person over online chat, they seemed to agree that this sounds like a bug.
    I have seen many confused posts in these forums regarding alert sounds suddenly disappearing.
    Below is the text that I submitted at http://www.apple.com/feedback/
    If you share this problem, I suggest you do the same.
    My case number is 606343836
    Begin message:
    I've had a 5S since a few weeks after launch and this problem has only come about in the last few weeks, so I suspect it has to do with a recent OS patch.
    Sometimes my alert messages just stop working.  They seem to work one minute, then they stop.  Alert messages would include email notifications and txt message pings.  When they are not working, I can go into Settings>Sounds>Text Tone, and all of the options will simply result in a vibration and no sound. 
    Rebooting the phone does not fix the problem.
    What I have found to fix the problem is to open a game and raise the volume of the game.  Then when I exit the game, alert messages start again. 
    This seems reversible, if I go back in and mute a game, my alert messages go away as well.
    If this is by design, I do not think it should be, as I think it is reasonable for a user to want to control the "media" part of the volume separately from the "ringer" and "alerts" part of the volume. It makes sense to want play a game or video on mute but still get alert messages. If anything, I think the alerts volume should be tied to the ringer volume, I think that would make sense.

    Additional info, which makes me think this is a bug rather than a feature.  If you go into Settings > Sounds and turn off the "Change with Buttons" option, then the ringer should always ring at the volume of the slider on the screen. 
    The volume buttons now appear to only affect the media/games volume, and it works as expected EXCEPT:
    if you are in a game and you mute the volume in the game, then exit the game, all alert sounds are muted and you can't turn them back up by raising the volume with the volume buttons.
    If you go back into the game and raise the volume within the game, then exit the game, then alert sounds do turn back on.
    I have tested this with two games from two developers.

  • When I have headphones plugged into my iphone it says warning'' high volume'' and becomes first a red and then plop a number of red pops but it will not be so for someone else I know. My sound will be much lower than anyone else in the music, and when I t

    When I have headphones plugged into my iphone it says warning'' high volume'' and becomes first a red and then plop a number of red pops but it will not be so for someone else I know. My sound will be much lower than anyone else in the music, and when I talk by phone headset

    Hi! I have the same problem when I use my headphones .
    iPhone 4s England, iOS 6.1.2

  • Thereis no sound on my macbook air. I have checked the volume and mute controls and the internal speaker are selected.  any one any ideas please.

    there is no sound on my macbook air. I have checked the volume and mute controls and the internal speaker are selected.  any one any ideas please.

    Hopefully one of these steps should solve the problem.
    1. Remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    2. Reset PRAM.  http://support.apple.com/kb/PH4405
    3. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    4. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so, uncheck it.
    Best.

  • Suddenly most of the applications have no sound and I can't adjust the volume, and when I try with the volume button, appear the message "sound effect" and nothing append

    Suddenly most of the applications have no sound and I can't adjust the volume, and when I try with the volume button, appear the message "sound effect" and nothing append

    Hello, Miryam Maria. 
    Thank you for visiting Apple Support Communities. 
    I see you are experiencing issues with sound on applications when playing video/audio content.  If this is the case, the first thing I would check is if the side switch is set to silent as this can cause applications to be mute.  Below I have included an article that covers adjusting the  settings for the side switch.  Also, make sure to close all applications in Multitasking and power cycle the device.  Test the sound issue after processing these steps.
    iPad: Understanding the side switch
    http://support.apple.com/kb/ht4085
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Cheers,
    Jason H.

  • My iPhone 5s sounds stop working.i did not do anything it just stop working when I tried to turn on my music player all the sounds is not working I already check the volume and it is not also muted :( what happened can anyone solve my prob

    Hello everyone my iPhone 5s sounds stop working.i did not do anything it just stop working when I tried to turn on my music player all the sounds is not working I already check the volume and it is not also muted :( what happened can anyone solve my problem please

    Hey Kirby17,
    Thanks for using Apple Support Communities.
    If you are not getting any sound from the speaker, follow this article.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved, please contact Apple Support.
    Have a nice day,
    Mario

  • After upgrading my Macbook to Yosemite, the volume icon at the top right is greyed out and sound does not work.

    After upgrading my Macbook to Yosemite, the volume icon at the top right is greyed out and sound does not work.

    Interesting bug. I'm cautiously optimistic this will get rid of the weekly annoyance. The difference is that I bought my laptop back in Feb 2015, so it came with Yosemite. I think the issue may have appeared soon after an OS update not long after I got the thing, though. I was using a sudo command in the Terminal, but that is obviously not a fix.
    I wonder if there is a broken .plist file that may be fixed ...?

  • My computer sound is all messed up i have no volume and an echo

    I recently downoloaded a sound board program and it messed up my computer sound. I removed it but what ever it did didn't gow away I have now volum and my sound sounds like has an echo Is this suport or did they dirrect me somewhere else

    Have you tried System Restore to revert to settings before the issue occured? Start,All Programs, Accessories, System Tools_System Restore. Choose a date before the problem.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • After iOS7.2 update my iPhone 4S will no longer feel the volume of the video and sound alerts. Why?

    after iOS7.2 update my iPhone 4S will no longer feel the volume of the video and sound alerts. Why?

    http://support.apple.com/kb/TS2802

  • HT4623 I have recently updated my software to iOS 7.1 and I have found that my alarm clock still works but with no sound! All other sounds working, txts, ringtone, music etc.. Have tried turning it on and off, volume, and the do not disturb is off, help..

    I have recently updated my iPhone software to iOS 7.1 and found the sound on my alarm not working, all other sounds are..
    I have turned phone off, checked the volume and the do not disturb function is off, any other ideas?

    Mine did the same thing 2 days in a row i get the phone and no service I put it in flight mode and back & still nothing I have power down then restart. BTW mine is factory unlocked

Maybe you are looking for

  • Mac os 8.6 and 9 support (strange behaviour)

    Hi, I'm running mac os x server 10.4.4. When i put the view of a folder on a os 8.6 or os 9 client to list, the server or clients (i'm not sure yet) rebuilds the contents of a folder once a second, with as result that some items are standig twice in

  • Need Help in Union of Columns in FX

    Hello Experts, In database I have a table having two columns, Version From, Version To. Column "Version Start" data is like V0, V1, V2, V3, V4....upto V11 (fixed value) Column "Version End" data is like V1, V2, V3..... upto V11 (fixed value V0 is not

  • List of calendar events/ hard to read

    Before I installed Snow Leopard, iCal allowed me to see a list of all entries in a calendar group. How do I get this feature? I use iCal as a means of documenting past events such as birthdays or medical visits. Seems this latest revision has made a

  • Cannnot remove host target in Grid Control 10.2

    Chaps, I'm trying to remove a agent discovered in grid. I've done: 1) agent is running 2) removed all database targets, listeners etc discovered in grid 3) shutdown agent 4) tried removing the host from either the hosts or all targets page, but the r

  • StoreVault Manager for Windows Server 2008 R2

    There is this software for Windows Server 2008?I need to keep one Windows Server 2003 just to have this software installed.Any one knows any procedure for that?Best RegardsRobson