Volume has fixed value after recording volume-slider

Hi
I recorded a part I played on my keyboard and after that recorded volume-changes I made with the volume slider . But after the so created region the volume stays fixed on the last recorded value. Is there a way to avoid that ? Has to do something with last volume message that isn't ended.

no one knows how to have controle over the volume slider again after a hyperdraw in a region? Is it normal that the volume is fixed for the rest of the song unless you hyperdraw or automate again ? very anoying.....Even after moving all trackautomation to region it stays fixed , you should have full controle agsin over the volume.
Is this a bug?

Similar Messages

XSLT mapping for fixed values

Hi,
i am doing a XSLT mapping. i have a field which has fixed values(can be performed using graphical mapping). but the same i am not able to implement for XSLT. can anyone give me a idea about this
<removed by moderator>
Thanks
Deepika
Edited by: Mike Pokraka on Jul 24, 2008 12:57 PM

Step u2013 By u2013 Step Simple Approach for XSLT Mapping
Step By Step Simple Approach for XSLT Mapping
generic xslt mapping part 1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/01a57f0b-0501-0010-3ca9-d2ea3bb983c1
generic xslt mapping part2
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9692eb84-0601-0010-5ca0-923b4fb8674a
xslt recursive templates
XSLT: Recursive Templates
regards
kummari

Fiscal Year fixed Values.

Hi all,
I have this situation.I have a report in DEVELOPMENT which uses the Fisal Year in column.The problem is when i rt.click on it>>edit>>Fiscal year Variant>>Restrict In the window(Selection for Fiscal Year Variant)..i don't see any values under Fixed Values and it has values under variables.
But the in PRODUCTION when i run the other reports i see that fiscal year has Fixed values for fiscal year but no values under variables.
Can anyone tell me why this is happening.This is true for all the reports that we have in prod.I checked the T009 table and saw that under fiscal year V6 nad K4 is taken.Then where is the problem?Can anyone help plz.
Thanks a lot.

Sorry..i was wrong i just verified that there is data in Production but not in Development. do u think thts the reason why i am facing this problem?
Thanks.

DrillDown in ALV for fixed values of domains

Hi,
i want to create an ALV Grid with an structure that has data elements with domains containing fixed values.
As far as i know, in Table Controls and other dynpro fields refering to such domains, the drilldown function is automatically available.
In an ALV-Grid the values are available with the F4-Button.
Ok, you can select a value, but the value is shown in the grid is the fixed value not the short text of the value like it is in Table Controls. What I did is to implement an conversion exit to show the short text in the grid, but I am not really satisfied.
What I ask you: Is there a possability to show a field of the ALV-Structure with drilldown functionality automatically, when the domain has fixed values?
Thanks in Advance
Michael

Hi Michael,
I think I have found the solution to your problem. When you call the method SET_DROP_DOWN_TABLE of the ALV Grid, you can see that there are two tables parameters (both of which are optional).
You can use the second tables parameter to give the short text of your field-value.
Consider the following code snippet.
==========================
data : lt_dropdown_with_alias type LVC_T_DRAL,
       ls_dropdown_with_alias type LVC_S_DRAL.
ls_dropdown_with_alias-handle = '1'.
ls_dropdown_with_alias-int_value = 'T'.
ls_dropdown_with_alias-value = 'True'.
append ls_dropdown_with_alias to lt_dropdown_with_alias.
ls_dropdown_with_alias-handle = '1'.
ls_dropdown_with_alias-int_value = 'F'.
ls_dropdown_with_alias-value = 'False'.
append ls_dropdown_with_alias to lt_dropdown_with_alias.
call method ALV_GRID->set_drop_down_table
            exporting IT_DROP_DOWN_ALIAS = lt_dropdown_with_alias.
==========================
Obviously, <b>int_value</b> is the internal value and <b>value</b> is the text that you want to be displayed.
Hope this helps.
Regards,
Anand Mandalika.
P.S. I'm almost certain that this code will work. If it does, please do reward the points.

How to show fixed values instead of field values in ALV cell.

Hi colleagues,
I have a ALV object of type CL_GUI_ALV_GRID.
I have associted a table with it which has a field called refresh type which is of type char1.
My program works fine.
But the problem is,
The refresh_type field has fixed values in its value range.
On display of ALV i want to show the associated fixed value instead of actual value in table content.
I donno the way to do it.
Please help me.
-Trupti

Another way to do this would be to define a conversion exit function for use in the report.
You can copy a SAP-provided function group like ALFA as a template, but you may need untyped importing/exporting parameters. Name the new functions as CONVERSION_EXIT_Zxxx_OUTPUT and CONVERSION_EXIT_Zxxx_INPUT where Zxxx is some string you choose.
In this case the input to the ...OUTPUT function will be the code value from the database and the output value will be the corresponding text. So the code of the function CONVERSION_EXIT_Zxxx_OUTPUT will do the conversion suggested in steps 2 & 3 of Marcin's response above.
Here is an example based on the SFLIGHT model to enhance example report BCALV_GRID_DEMO.
First the conversion function: (I used 'zalv' as my identifying string for the conversion.)
function conversion_exit_zalv_output.
*"*"Local Interface:
*" IMPORTING
*"     VALUE(INPUT)
*" EXPORTING
*"     VALUE(OUTPUT)
field-symbols:
    <output> type c,
    <carrid> type c.
assign input to <carrid> casting.
assign output to <output> casting.
select single carrname from scarr into <output> " convert code to text
         where carrid = <carrid>.
endfunction.
In a copy of program BCALV_GRID_DEMO, make changes in the module pbo.
module pbo output.
set pf-status 'MAIN100'.
if g_custom_container is initial.
    create object g_custom_container
      exporting
        container_name = g_container.
    create object grid1
      exporting
        i_parent = g_custom_container.
* " changes start here
    data: gs_fcat type lvc_s_fcat,
          gt_fcat type lvc_t_fcat.
    tables: dd03l.
    select * from dd03l where tabname = 'SFLIGHT'. " fill field catalog
      if dd03l-fieldname = 'CARRID'.
        gs_fcat-inttype = dd03l-inttype.
        gs_fcat-outputlen = 20.
        gs_fcat-coltext = 'Carrier'.
        gs_fcat-seltext = 'Carrier'.
        gs_fcat-edit_mask = '==ZALV'. " == with the string you used to name the functions
      else.
        clear gs_fcat.
        gs_fcat-ref_table = dd03l-tabname.
      endif.
      gs_fcat-fieldname = dd03l-fieldname.
      append gs_fcat to gt_fcat.
    endselect.
* " changes end here
    call method grid1->set_table_for_first_display
      exporting
        i_structure_name = 'SFLIGHT'
      changing
        it_fieldcatalog = gt_fcat
        it_outtab        = gt_sflight.
endif.
endmodule.                    "PBO OUTPUT
If you run this amended program, you see appropriate carrier texts in the ALV grid, where the original program had the IATA codes.
This approach makes sense if, for example, the same translation is also required elsewhere, as the function can easily be reused.
best wishes
Ed

Where has my music volume slider gone?

Music volume slider has disappeared as well as the sound from the music app. phone rings, no app sounds. anyone?

You should be able to:
Backup the device to the new installation
Transfer your purchases into a newly authorized library
Recover any other media using third party tools as suggested in this post from forum regular Zevoneer
Restore the device from the backup
This process should switch the association of the device to the new library, preserving the data and settings in your apps.
May also be prudent to attempt a backup to iCloud directly from the device before you start... Settings > iCloud > Storage & Backup > iCloud Backup > On. It won't save any media but it would preserve the general account settings and documents in case anything goes wrong while you are trying to extract your other data.
When you get it all fixed, make a backup!
tt2

Iphone volume slider has disappeared

The volume slider on my iphone has disappeared and it wont play music from itunes, apps, videos or anything else I've tried. I have tried using the external volume controls on the side and its not on silent. I have also tried resetting a couple of times but this hasn't helped.

I had the same problem. My iPhone recognizes that it is connected to a music dock and the phone speaker won’t work.
It’s definitely a hardware problem APPLE could have solved by software. With that problem when using VIBER you can select the sound output either to music dock, earpiece, or phone speaker. APPLE just needed to implement the same in the phone SETTING.
So how to solve without APPLE support? (Getting APPLE support is best but in my case the nearest APPLE store is hundreds of kilometers from my residence, so not worth enough). First I cleaned the connector pins and put a silicon dust cap (with two tongues) which more or less squeezes the inner connector pins and the volume slider and sound was back. When I remove the cap for charging the volume slider and sound disappear again (not immediately but sooner or later).
Since whether connected to a music dock or not is recognized by the resistance between two pins on the connector, for me it seems that the cap made the resistance go to infinity which was close to the dock connection value without (why, I have no idea, the air moisture?).

My ipod touch 1g has lost the volume slider since i updated to 3.1.3

I updated my Ipod touch 1st gen yesterday to 3.1.3 after it being sat in a drawer for a while and now I have no volume slider. I can hear the music but it is very very low. Its does not pop up when I plug in a head phone jack like its supposed to and I have restored it 3 times. Anyone got any ideas on what I can do?

Yes I restored it to factory settings more than once failing everytime with the volume slider still missing. It was there before I updated the Ipod yesterday and now its gone since 3.1.3 so im sure its not hardware. There are alot of posts about this problem and no fix for it I have used 3 differant sets of working head phones.
Is there no way to downgrade the firmware?
Thanks

IPhone Volume slider goes wonky after charging!

Ok; I have a WEIRD question. (then again, when isn't a tech question weird? Nevermind.)
So, I have a completely babied iPhone 3GS. Never fallen even an inch, been in a case since I got it, I even clean the screen. :3 I have iTunes 9.0.1.8, and a Griffin wall charger/adapter that I bought about 2 years ago when I got my older iPod. That's what I use (in conjunction with the new cord I got with my iPhone a few months ago) to charge it. Now my question: (and yes, all this was relevant!) It would appear that my iPhone's volume control on its iPod (not on other audio apps such as Pandora or Youtube, only iPod) goes ABSOLUTELY WONKY after charging it on this wall charger. Nothing else breaks, it all works normally, even plays normally, except the volume slider bounces around like it's on drugs and sticks to a very loud place on the slider. In addition, while it's plugged into this charger and ONLY while plugged in, the whole screen's touch sensitivity goes weird, too. It thinks my finger is somewhere other than where it is. It registers a touch an inch below where my fingertip really is on the screen & is unresponsive at random. This is fixed by unplugging it from the charger.
The volume slider is fixed by plugging in & syncing the phone with my computer (using an older iPod cord: I have way too many so I use one for the computer & the newer one for the charger), but then it promptly goes back to broken after I plug it into the wall charger for a couple hours. I've never used a car charger on it (heard that's bad). It's not practical for me to open my laptop every time I wanna charge this guy; should I use a different wall adaptor? Is an old Griffin adaptor not good for iPhone? (btw: I can manually move the volume down with the button on the side of the phone, but the slider on-screen doesn't show the difference; I just hear less volume.)
Many thanks, and best of luck (all of us dealing with technology need it)!

Got the same problem... but I'm using only original hardware. The problem with the volume control is only appearing when using the Ipod (on the Iphone). The volume control on the Youtube App for example is working fine. Also it is only the volume control on the touch screen and not the hardware volume control button. The screen volume controller sticks to a certain level and when trying to move it, it follows my finger but jumps back to its initial position as soon as my finger is no more touching the screen. Furthermore the indicated volume on the screen does not correspond to the real volume level. I.e. I can turn up the volume on the hardware volume controller as much as possible and the screen volume controller stays at the same position...
I am not using any of the mentionned apps!? However I got quite a lot of apps so it is possible thant one of them is causing the problem. Does anyone have a list of all apps that are causing this problem?
Btw: I am using the new 3GS with the latest software on both Iphone and iTunes..
Thank you!
gagsi

After upgrade to iOS8, very slow, no volume slider bar, no volume through the iPad although the headphones work. My volume slider bar now reads"Sound Effects"?? Mute is off, need help. So frustrated!

I need help! After upgrading to iOS8.1.2 , my volume slider bar disappeared and is now "Sound Effects" ??? I have no external sound. Do have sound through headphones. Mute is off. Have tried resetting several times with no luck. Frustration level is building as I have wasted hours now on this. Any help would be greatly appreciated!

I do not think apple will do much to help you under warrenty, as this was caused by a fall. (alas!)
I think the case is, as you suggest, jamming the rocker down, and it may have damaged the swith itself. Can you carefully lever it out of the way? Very very carefully. If it is already broken, there is not much harm you can do by trying.
If it is just the switch being jammed, you might be able to move it out a little. If it is the swith itself, you will need some real service after your three hour drive. You might check your loacl area for a closer service repair source.

The volume slide control on my 4s has disappeared when I watch videos and listen to music. Any suggestion on how to get it back? I've tried the recommendations in the manual

The volume slide control on my iPhone 4S has disappeared when I play videos, music and YouTube. I've tried the recommendations in manual, to no avail. Any suggestions?

Your phone still thinks it is plugged into the stereo. I don't remember how to solve this but perhaps you can search through the forum or maybe one of the members here will jump in on how to switch the playback to speakers.

Can the volume slider show value in non-DB?

I remember seeing the volume slider in the channel strip showing normal number values instead of db, but I cannot find a way to changes this. Anyone knows?
André

The worst part is that once you get used to using the db scale, and then open an old song that is set to numbers (MIDI 0-127) there is no way to set it to db. Why ever remove a function?

After updating to iOS 6.0.1 volume button not responding even theirs no volume slider in music app nor video app plz help m using iPhone 4 os Windows 8

After updating to iOS 6.0.1 volume button not responding even theirs no volume slider in music app nor video app plz help m using iPhone 4 os Windows 8

I suppose that you can demand all you want. It would have to be proven that the iOS update broke this particular function but it could also be said that it was just a matter of time that the broken thing manifested itself. Since the phone is out of warranty, it could also be said that it is your risk to update software. I'm not trying to be argumentative here, but we are not Apple. We are users like you and just try and provide support to other users. What you decide to do from here is your decision. I've given you all I know to do.

Volume slider bar has changed appearance

My volume slider bar has disappeared & in it's place I have a series of dots. Anybody have any ideas?

See if this helps: iPod "stuck" on the artwork or rating screen

Volume slider won't work after app installation.

Dear all,
I have tried to search for this topic but as I’m not sure what is happening, it is hard to pinpoint the topic. PLEASE RE DIRECT if possible.
I have recently installed 2 applications to my IPhone 3Gs (separate installation days) and since then each time I use the installed app, I can’t use the volume slider on my IPhone's IPod?
It will randomly turn loud then quiet and if I use my finger to on the slider it returns to its starting position when I let go??
I have tried uninstalling the applications in question and re-installing them via my laptop and even tried downloading them via both 3G and WiFi but still have the same effect.
P.S. I have a video of this happening if that would help and it also works fine if I restart the phone but as soon as I use the apps again I’m back to square one. I would just stop using them but one is Real Football 10 which I paid £3.99
I have even raised a report on the two applications via the app store but have been told to restore phone to factory settings and see if that works? (I haven’t tried this as it is my last resort)
Can anyone help me with this??
Much appreciated
SanderCh
Message was edited by: SanderCh
Message was edited by: SanderCh

my little piece of advice is to remove your said app from your iphone/ipod and wait for their update which I hope will fix this issue.
I have had this problem from one of the app from clickgamers which I installed that triggered my volume slider,no choice but to remove them from my iphone/ipod and my gadget back to normal,just to bad I can't play my favorite game anymore unless they do the update to fix the issue

Volume has fixed value after recording volume-slider

Similar Messages

Maybe you are looking for