[Vox] MSI VOX TV Box doesn't work

Hi,
I hope somebody here can help.
I loaded up the drivers from the CD that came with my MSI VOX TV Box USB 2.0 and nothing is happening. I also tried the drivers and software from MSI's website.
When I load up the hardware driver, I get an error message saying the driver doesn't pass the Windows Logo test. If I continue with the installation, my computer recognizes the card, but I can't do anything with it. The software that came with the VOX (it came with Intervideo MSIPVS 3) doesn't load up. The WINDVR.exe program shows up in the processes when I click on CNTL-ALT-DELETE, but the program doesn't do anything on my computer.
I am running Windows XP Media Center on my laptop.
Please let me know if you can help or if I need to provide any other info.
Thanks.

Hi,
Thanks for replying.
I am running Windows XP MCE version 2002 service pack 2.
Dell Inspiron 6000
Intel Pentium M 1.60GHz
797MHz, 512 RAM
60GB hard drive
I am using the power adapter that came with the Vox. I used it with the power supply as well as just with the USB 2.0 cable.
Please let me know what other information I should provide.
Thanks.

Similar Messages

Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro

Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro when plugged in with a dvi to mini dvi cable. Any ideas what to do to make it work? I lugged the 23" 2500 miles into the wilderness and I need help

Okay, here's an update: the DVI to ADC adapter does work with the Apple displays that I have tried, but it won't work with the Formac. I have tried multiple time to contact them, but to no avail... they don't even respond to threats of posting my opinion of them, which is this:
DON'T BUY ANYTHING FROM FORMAC! They make quality products, but their customer service is a big time joke! They won't take care of you.

I own PSE 7 on disc. The laptop it was loaded on died. My new laptop doesn't have an optical drive so I downloaded PSE 7 from the Adobe site. It downloaded fine but I cannot start using it until I enter a S/N. The S/N on the disc box doesn't work.

I own PSE 7 on disc. The laptop it was loaded on died. My new laptop doesn't have an optical drive so I downloaded PSE 7 from the Adobe site. It downloaded fine but I cannot start using it until I enter a S/N. The S/N on the disc box doesn't work.

Those links weren't particularly helpful to me. They convinced me to install the drivers for my USB 2.0 card, but that didn't make a difference. Still no OS X without a PRAM reset if I've dared to venture into OS 9.
It's always been my understanding that an unblessed System Folder will not be selectable in OS 9's Startup Disk control panel. My folders are blessed and healthy. Of course I'm running 9.2.2, as stated in my first message. I also frequently verify and repair my disks and permissions.
I did a verbose startup of OS X, and noticed something funny about "ATY...too old." Perhaps this problem is related? I ventured into my system.log file and there it was, repeated over and over, everytime I've booted this computer:
Aug 8 18:30:24 localhost kernel: From path: "/pci/@d/pci-ata@1/ata-4@0/disk@0:10,\mach_kernel", Waiting on <dict ID="0"><key>IOPathMatch</key><string ID="1">IODeviceTree:/pci/@d/pci-ata@1/ata-4@0/@0:10</string></dict>
Aug 8 18:30:35 localhost kernel: ROM ndrv for ATY,Rage128y is too old (0xb3383430)
Aug 8 18:30:41 localhost init: kernel security level changed from 0 to 1
Anyone know how to interpret that? Is it related to my problem? I googled it, and all I found was a web board of people arguing over whether the Apple installed stock ATI Rage video card that came in the G3's is appropriate for Panther. The Ye's have it as far as I'm concerned...as long as I leave OS 9 alone, my video is fine on this computer!
14" iBook G3 800, B&W PowerMac G3 350, Mac Classic II 16 :-P Mac OS X (10.3.9) System 7 Rocked!

[Acrobat X Standard] The tool box doesn't work. Please help!

[Acrobat X Standard] The tool box doesn't work. Please help!
I have a Acrobat X Standard.
When I open the documents, I can't click the tool box. but when I don't open the documents, I can use the tool box.
To solve the problem,
1. reinstall the menu.
2. reboot the computer.
But, It still didn't work.
Plz help!!

Was it AA X Std that you had these options in (sorry, I only have Pro)? If it was the trial (that is Pro), it may be that Std does not have to feature. Under XI at the Adobe site, there is a comparison of features between Std and Pro that might give you a hint.
There is also an option to turn on or hide many tools. For me there is a small icon just above the tools...comment titles. If you select that it give a list of tools you can display. Often, several are not displayed by default. How you lost them is another things, but it is getting them that is the basic question.

[Vox] MSI VOX TV BOX USB 2.0 problem with audio drivers compatibility

Ok,let's go...
I have a DELL Latitude d510 laptop with a centrino 1.73 GHz procesor and a soundcard supported by Sigmatel software Sigmatel C-Major audio.I bought MSI VOX TV BOX USB 2.0 and tried to install it on my lap top.Yes,I had problems with SP2 on my XP and the MSIVPS software from the instalation CD was crashing every time I tried to start it,but I solved those problems by downloading the latest drivers and the 3.xx version of MSIPVS.But...I still have a problem with audio.To be precise it seems that my audio drivers are incompatible with the VOX drivers.So now I have video but I don't have audio.Also I installed the tv card on my desktop machine and it worked like a charm(everything workes:audio,video,the old MSIPVS which I like better than the new one cause it supports my remote,has better way of managing scanned channels,e.t.c ,but I have USB 1.1 on my MB so the image quality is very poor).I did a lot of experimenting,for example i uninstaled my audio drivers(that Sigmatel C-Major thing),and installed the old MSIVPS and guess what...IT WORKED but there is no use from this cause I don't have audio On the other hand if I have everything installed then in the MSIVPS (the 3.xx version not the old one) under audio I get CD Player as an input audio device(what happened with microphone...?).To cut the long story short I tried a bunch of things and still no audio.Is there any other case of DELL audio software-VOX incompatibility?Any ideas,or solutions?

thank you for answering me. y have no pci card working, only usb 2.0 and sata devices. also, the MSI geforce 9600gt PExp 2.0 gpu. the only usb 2.0 devices which work, are the flash (pen) drives, keyboard and mouse. but no way that the WLAn adapter and TVcapture, both usb 2.0 work.i've tested them front side and rear side and is the same failure: if i use a pendrive, works ok. if i insert the wlan or the tv capture stop work as the 2.0 and a advertising window tell me to change to a 2.0 port, means the ports are working slower, at 1.1. i still have the other PC, built on the MSI K9N4-slif mobo, tested them and both devices work at perfection. i have 2 screenshots to show you:
this, is the device manager (sorry, in spanish but you understand that's about the nVIDIA EHCI USB 2.0 controller. the 2nd one seems to be more sensitive (works worth) then the first one. when the tvcapture begin work, then fails, i'm trying to update this controller, does it ok but then the devicemanager-window freeze. i must stroke the "enter" key to "accept" / finish the update. then, fails again:
the other one is from everest corporate edition:
both drivers marked with purple colour!
i think i should update this Win XP drivers, but how? the usbport.inf file (C:\Windows\inf) don't change anything. i don't want to switch xp to vista, i'm happy whit it.
i'm thinking also on another possibility: could be an energy failure? some usb devices, like the big usb flash dives. 250-320gb, fail because the 5v/usb are receiving it's not enough. could be, but that means this mobo has no solution and i'll loose my money.
thank you very much and i'll stay alert of your suggestions. by

MSI - P7N Diamond ESATA doesn't work under XP

I have 2 P7N Diamond motherboards and am running XP Pro/sp2.
I have never been able to get the esata ports to work. I have spent the last 4 months RMAing boards back and forth to MSI. I have tried at least 4 motherboards, 3 esata external drives, and 3 cables (all 6 feet).
Sometimes on the upper port (lower port doesn't work at all), the drives get detected in bios as gibberish. Other times it is listed correctly in post, but then I get a "9th slave hard disk error". I press F1 to resume, enter the bios, and the drive shows up. The drive never gets detected in windows, however.
In bios I have the Extra IDE/RAID Controller enabled and RAID mode is set to IDE.
In XP I have the JMP36X IDE Controller installed.
During all this time, MSI Tech Support has insisted that I am doing everything right. I called them last night and they mentioned doing an rma yet again, but when I called back today and talked to someone else, he told me that esata only works under vista in AHCI mode. He said that it won’t work under XP in IDE or AHCI mode.
Hope someone can help me!!

Thanks for the reply.
Quote from: NovJoe on 19-July-09, 17:51:41
Have you tried to install the RAID controller driver using F6 option by using the XP installation disc?
I did that when I installed XP.
Someone provided this link to set up AHCI mode. Plan to try that in the next day or two.
http://http://expertester.wordpress.com/2008/07/27/how-to-enable-ahci-windows-xp/

Getting rpm values from the fans on the MSI NEO2-FIR motherboard doesn't work

I currently have 6 Noctua NF-S12-1200 120mm fans spinning in my computer but i am unable to get rpm values from them except the cpu-fan. It doesn't work to get a readout from the others with either, BIOS, Dual Core Center or Speedfan. Regarding Speedfan is it true it don't support the SuperIO Chip on the Neo2, the FINTEK F71882F? It's not currently listed in their supported temperature sensors list.
So whats the problem? Shouldn't atleast DualCore Center atleast show the rpm's from the other chassis fans?
Or the fans don't support sensor readings?
Thanks!

Quote from: Jack on 13-October-10, 00:15:36
Well, there is nothing that can be done about. SysFAN 1 & 4 support sensor readings, #2,#3 and #5 don't. You can also see that in BIOS Setup. #1&#4 are the only ones that show up there (H/W Monitor section). This is not a malfunction or a bug. You have to live with no fan sensor readings or be creative about the wiring.
The problem is that i use the UNLA cables from Noctua which half the speed of the NF-S12 fans i run with. And it blocks the rpm readouts in Speedfan and BIOS.
http://www.noctua.at/main.php?show=productview&products_id=5&lng=en
Strange thing is that the CPU fan reads fine with the ULNA cable attached but the SYSFANS will not read the rpm with the ULNA cables.
What is wrong?

The "Complete Percentage" box doesn't work

Can anyone tell me why the b0x remains "0% Complete" even though the form is filled out correctly?

Hi Josh,
Thank you for the quick response!
Please have a look for yourself, it doesn’t work.
In the previous forms made I’m pretty sure it has worked, it’s the last two I’ve made that I’m having trouble with.
https://adobeformscentral.com/?f=FeJH7rF1W1FjDEdyWrOA3A
And if you wonder, the form is in Swedish…
Jessica

On version 19 which just downloaded why doesn't the primary search box doesn't work when all other search functions (address box and upper search box) do?

The primary search box in the center screen does not respond to any search input.
In contrast:
(1) the https:// address box responds immediately and normally when input is provided and the curved arrow tapped,
(2) the upper search box in line with the address line works normally also when a search inquiry is provided and the magnifying glass tapped, and
(3) all bookmarks work normally as they had previously prior to Firefox upgrading to 19.
Everything seems normal with the exception of the center search box and the search command.

I have tried all the so-called fixes listed here, but since downloading version 19, I can't get the search box to work. If I go through and try the fixes here, it works until I shut it down, and then I have to go through all these steps again. Trying to get someone to help is virtually impossible, and I am getting to the point where I will uninstall Firefox and use IE, as I have no other choice!

Xml file and htmlText box doesn't work

Hi,
i have a action script that read a xml file and put the content of this file in a
htmltext box, but when come inside the xml file a code like this"Test" the box (htmltext) appears empty.
my code
this.my_txt.embedFonts = true;
this.my_txt.html = true;
this.my_txt.htmlText =myTextos;
The variable "myTextos" load the content from xml ...but it doesn't appears in my htmltext box
How can i fix this?
obs: When i erase the tag in xml the variable "myTextos" appears correctly in my htmltext box.

Look my xml file:
<?xml version="1.0" encoding="utf-8"?>
<sm>
<item><![CDATA[Recordações do Escrivão Isaías Caminha
Leiva era o chefe, era a inteligência do grupo, pois, além de poeta, tinha todos os preparatórios para o curso de dentista.
<align="right">Fonte: BARRETO, Lima. Recordações do Escrivão Isaías Caminha. Rio de Janeiro: Fundação Biblioteca Nacional. Disponível em:
http://www.dominiopublico.gov.br. Acesso em 19 mar. 2008.

]]></item>
</sm>
why my dinamic box (in flash 8, action scrpit 2) doesn't interpret the tag ?

Re: Old Cable Filter with New X-1 box,, doesn't work,,?

I have the same issue, only i don't have a filter involved at the splitter. I can't get the box to run through an XBOX One, the boxes work fine in all the other rooms. Help!

What kind of "filter" are you refering to? The old AnyRoom DVR POE filters are the same as X1, so technically should work (MoCA filters). But Im not sure based on your post if that is what you are talking about... need some more info!

Old Cable Filter with New X-1 box,, doesn't work,,?

The filter is stamped: TNB6-40P10/8 Thanks again for the support.

Just to be clear here, X1 does require a filter. It's called a MoCA POE filter (point of entry) and it should be installed right where Comcast signal first enters your house. The purpose of this filter is to prevent your neighbors from being able to see recordings you might be watching on your DVR.
Any other filters you find are probably incompatible with X1 service and need to be REMOVED.
wjhall273 wrote:
Hi - I replaced all three of my old HD Desktop boxes with X-1 and two of the three work fine.  The one in my office is split with the Cable Modem (Internet) with a filter before going to the cable TV box.  This cable box will not register.  I swapped with the one in the Bedroom, the box works fine there, but the one that was in the Bedroom will not come online now either.
 
Question:  Do I still need the existing "Barrel Filter"? or does it need to be replaced?
 
Thanks,

Selection box doesn't work in other PC after application built.

Selection box of VISA Resourse Name dosen't work after build application. and how to change the name of items in the box?

Are you using the built application on a different machine?
If so, you will need to install NI-VISA on the machine you are trying to use VISA.
Also, you probably want to right click on the control and "allow undefined names" so you can type in the visa resource names like "ASRL1::INSTR".
If you want to port over the aliases "COM1, COM2", etc then you can copy your visaconf.ini file (on a Windows 95 system: vxipnp >> win95 >> NIvisa >> visaconf.ini) into the same directory as your executable.

MSI GT628 - WLAN Button doesn't work

Hello. I've just noticed that even when I don't press the WLAN button (led indicators for wlan are off), I can still access wlan points. Does anyone have the same problem? Anybody know how to fix this? I've already got System Control Manager running, and the buttons work for the Webcam, Bluetooth, and P1.

I upgraded to Windows 7 from Vista a few days ago, and I just recently noticed...
Doesn't having your WLAN on all the time use your battery or something? I'm not that bothered as well, but since its working against the expected behavior I thought I'd ask people who know better. Just had my notebook for a week. ^_^

How do i get serial number 2 if the msi help desk software doesn't work?

i have been trying to register my msi 980 ti for the MGS promo but i cant get the msi help desk software to work just keeps saying "The MSI Help Desk is only for MSI product." although i clearly have a msi video card, is there any other way to get the ...

Quote from: sply011235 on Yesterday at 18:05:14Can´t find Windows 10 Drivers for GT 72 2QD (4th Gen CPU)
Anybody knows if MSI is working on them? Will they become available?
They are not available on the MSI US...

[Vox] MSI VOX TV Box doesn't work

Similar Messages

Maybe you are looking for