VPD and connection for XSQL
We want to use Virtual Private Databases and the benefit of the connection pooling used in XSQL. For example, each connection is XMLBOOOK/XMLBOOK.
My understanding of VPD is that it "tracks" the user's connection session id and applies the "where" clauses in the securty policy to any data being selected. Because the XSQL connection is shared by many users, the session id is the same for all users, and VPD cannot work.
Ideas?
If the VPD depends on the setting of some session-level package varible, or session-level context, I believe your XSQL page could contain an <xsql:dml> statement to set this value appropriately for the current user (perhaps based on an HTTP-session level username?) so that the VPD will be in sync with the current browser user name.
Similar Messages
-
I use my cell as my home phone and the GE Gateway worked fine with my old LG flip phone. I have been unable to get the IPhone 4 to connect.
It sees the GE21518 and connects for 1/2 second but then goes to not connected. I have a Motorolla T505 in the car as a hands free Bluetooth and that seems to be working OK. Anyone have experience with the GE Gateway or other suggestions. Thanks!I use my cell as my home phone and the GE Gateway worked fine with my old LG flip phone. I have been unable to get the IPhone 4 to connect.
It sees the GE21518 and connects for 1/2 second but then goes to not connected. I have a Motorolla T505 in the car as a hands free Bluetooth and that seems to be working OK. Anyone have experience with the GE Gateway or other suggestions. Thanks! -
The iPAD has been plugged in,connected to wi-fi and locked for the past 12 hours now,how can I get into my iPAD everytime I hit the OK button it turns off? Any ideas on how to get past that?
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
-
Was told that on a cruise ship you can bypass the ship and connect for $35 per month?
I was told that you can connect on a cruise ship for $35 per month. Not using the ship connection or incurring any fees from the ship. True??
goldcanyon2 wrote:
I was told that you can connect on a cruise ship for $35 per month. Not using the ship connection or incurring any fees from the ship. True??
What other connection are you thinking of using out in the middle of the ocean somewhere? Even if there were another ship somewhere within sight, it would still be too far to use it's connection. Sorry, you have no other choices but to use the ship connection and whatever fees they set. Now, bleach has a good suggestion, a cruise director or similar might be able to help you locate a reasonable plan for a connection.
Good luck. -
Setup and connections for 3 airport extremes and 2 switches?
I'm finally getting ethernet wiring in my house rather having to rely on just wireless, but due to the lath and plaster walls I'll still end up having a separate Airport Extreme 802.11ac unit on each floor, otherwise the signal drops off dramatically with dead spots. I'm assuming that I should no longer do an extended network between the airport extremes, but I'm not sure of the proper wiring between the ethernet switches I'll have, the airport extremes, etc. either. Here's the gear...
2nd floor
cable modem
8 port ethernet switch
main airport extreme, should provide DHCP and NAT
cable modem plugs into the main switch
airport extreme plugs into the main switch
1st floor
airport extreme
there will be an ethernet cable from the basement ethernet switch to the 1st floor unit, which is the only feasible hardwire connection that I can make unless I pull a second long run of ethernet from the second floor, go to the basement and then back over to the first floor connection spot.
Basement
airport extreme
second 8 port ethernet switch
there will be an ethernet cable running from the 2nd floor ethernet switch to the basement switch
There are also additional airport express boxes attached to audio equipment and an AppleTV attached to an AV receiver for TV. Various printers, game consoles, etc. will plug into the ethernet switches.
As described above, all connections are going to the switches, not coming out of the main airport extreme and going to another airport extreme.
First of all, is the wiring described make sense or should it be handled differently?
Secondly, rather than an extended network, since I'll have hardwire ethernet connections between switches to all of the airports, what is the proper network topology to use in the airport utility? Does each of the three airports end up being their own wireless network, but just sharing the same name for 802.11 b/g, n, and ac? Any links to help me figure this out or do I need to make an Apple genius appointment?2nd floor
cable modem
8 port ethernet switch
main airport extreme, should provide DHCP and NAT
cable modem plugs into the main switch
airport extreme plugs into the main switch
What is the make and model number of the modem?
If it is a simple modem....(not a modem/router or gateway device)....you cannot have an Ethernet switch between the simple modem and the AirPort Extreme.
Instead, the modem must connect to the AirPort Extreme, and the Ethernet switch then connects to the AirPort Extreme.
However, if your "modem" is a modem/router or gateway device.....you could connect the Ethernet switch to the modem/router......but you would not configure the AirPort Extreme to provide DHCP and NAT.....since the modem/router or gateway would already be providing those services.
Let's get this clarified before we go any further, since the entire network will depend on this. -
Is there a mobo manual that shows the different cables and connections for the IQ772.UK?
Does anybody have a Service Manual to show disassembly and reassembly including mobo replacement? The screen has died and I have been told to replace mobo. The output to an external monitor works but trying to do a factory reset, it freezes on 17%.
Any further info in stripping and replacing including cable cobbections would be appreciated.
Regards
GrahamAttached find a picture which may help you.
JT
I work for HP but my posts and replies are my own.
**Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Attachments:
IQ772.pdf 109 KB -
Mail delivery error with 5510 e-print. updates and connection are ok. friend has same problem.
I have checked all of the updates and connections for my new printer. As far as I can tell, I've checked everything that needs to be checked and all is good. But, I still get the Mail Delivery error when e-printing. And my friend has the same problem with her new 5510 b111a. What could possibly be the problem? Regular printing, scanning and so on work fine with my wireless connection.
This question was solved.
View Solution.So it sounds like it may be an Issue with the provided Email Address from your internet service provider, you are sending from ,
What i would suggest as a test is to create a Email account either with g mail and or yahoo, and try to send the email to your eprint account/Email, and see if it accepts the email also, make sure you have your printer set to Accept email from all users you can do this by logging into Eprint Center and then going into these settings and selecting that option
I am an HP employee.
__ if this Solution has helped Please Mark as Resolved and feel free to Provide a Kudos__ -
Problem in using XSQL-session and connecting database
Hello
Let me explain clearly. We have some data entry screens for which we want to use session with time out option. Normally in Servlet, we use to create a session with max age option. Then everytime the browser call the servlet we use to check for session.isnew(). If it is new session then we will forward the page to Relogin (because session is timed out) or we proced with further action.
In XSQLServlet, how will do this. Do I have to create my own servlet extended from XSQLServlet ? Override the Service method and write about the session part and call
super(). Here only I am getting confused. In servlet mapping we have given for every .XSQL call run the XSQLServlet. How will I override this ?
And also we have problem with user id and password. We don't want to use the same id (system id as defined in XSQLConfig.xml) for every database connection. We want to define only the connection information like SID, Server, Port number. But user id and password should be dynamic. How can I achieve this ?
Please help us on solving these problem. Thanks.
Lakshmi
nullYou'll need to implement your own classes that implement the:
oracle.xml.xsql.XSQLConnectionManagerFactory
and
oracle.xml.xsql.XSQLConnectionManager
to change the way XSQL handles connections. Using this mechanism, you should be able to implement any alternative connection scheme you choose.
If you run into problems implementing these interfaces, give us a shout here in the forum. -
Scan for and connect to networks from an openbox pipe menu (netcfg)
So the other day when i was using wifi-select (awesome tool) to connect to a friends hot-spot, i realized "hey! this would be great as an openbox pipe menu." i'm fairly decent in bash and i knew both netcfg and wifi-select were in bash so why not rewrite it that way?
Wifi-Pipe
A simplified version of wifi-select which will scan for networks and populate an openbox right-click menu item with available networks. displays security type and signal strength. click on a network to connect via netcfg the same way wifi-select does it.
zenity is used to ask for a password and notify of a bad connection. one can optionally remove the netcfg profile if the connection fails.
What's needed
-- you have to be using netcfg to manage your wireless
-- you have to install zenity
-- you have to save the script as ~/.config/openbox/wifi-pipe and make it executable:
chmod +x ~/.config/openbox/wifi-pipe
-- you have to add a sudoers entry to allow passwordless sudo on this script and netcfg (!)
USERNAME ALL=(ALL) NOPASSWD: /usr/bin/netcfg
USERNAME ALL=(ALL) NOPASSWD: /home/USERNAME/.config/openbox/wifi-pipe
-- you have to adjust ~/.config/openbox/menu.xml like so:
<menu id="root-menu" label="Openbox 3">
<menu id="pipe-wifi" label="Wifi" execute="sudo /home/USERNAME/.config/openbox/wifi-pipe INTERFACE" />
<menu id="term-menu"/>
<item label="Run...">
<action name="Execute">
<command>gmrun</command>
</action>
</item>
where USERNAME is you and INTERFACE is probably wlan0 or similar
openbox --reconfigure and you should be good to go.
The script
#!/bin/bash
# pbrisbin 2009
# simplified version of wifi-select designed to output as an openbox pipe menu
# required:
# netcfg
# zenity
# NOPASSWD entries for this and netcfg through visudo
# the following in menu.xml:
# <menu id="pipe-wifi" label="Wifi" execute="sudo /path/to/wifi.pipe interface"/>
# the idea is to run this script once to scan/print, then again immediately to connect.
# therefore, if you scan but don't connect, a temp file is left in /tmp. the next scan
# will overwrite it, and the next connect will remove it.
# source this just to get PROFILE_DIR
. /usr/lib/network/network
[ -z "$PROFILE_DIR" ] && PROFILE_DIR='/etc/network.d/'
# awk code for parsing iwlist output
# putting it here removes the wifi-select dependency
# and allows for my own tweaking
# prints a list "essid=security=quality_as_percentage"
PARSER='
BEGIN { FS=":"; OFS="="; }
/\<Cell/ { if (essid) print essid, security, quality[2]/quality[3]*100; security="none" }
/\<ESSID:/ { essid=substr($2, 2, length($2) - 2) } # discard quotes
/\<Quality=/ { split($1, quality, "[=/]") }
/\<Encryption key:on/ { security="wep" }
/\<IE:.*WPA.*/ { security="wpa" }
END { if (essid) print essid, security, quality[2]/quality[3]*100 }
errorout() {
echo "<openbox_pipe_menu>"
echo "<item label=\"$1\" />"
echo "</openbox_pipe_menu>"
exit 1
create_profile() {
ESSID="$1"; INTERFACE="$2"; SECURITY="$3"; KEY="$4"
PROFILE_FILE="$PROFILE_DIR$ESSID"
cat > "$PROFILE_FILE" << END_OF_PROFILE
CONNECTION="wireless"
ESSID="$ESSID"
INTERFACE="$INTERFACE"
DESCRIPTION="Automatically generated profile"
SCAN="yes"
IP="dhcp"
TIMEOUT="10"
SECURITY="$SECURITY"
END_OF_PROFILE
# i think wifi-select should adopt these perms too...
if [ -n "$KEY" ]; then
echo "KEY=\"$KEY\"" >> "$PROFILE_FILE"
chmod 600 "$PROFILE_FILE"
else
chmod 644 "$PROFILE_FILE"
fi
print_menu() {
# scan for networks
iwlist $INTERFACE scan 2>/dev/null | awk "$PARSER" | sort -t= -nrk3 > /tmp/networks.tmp
# exit if none found
if [ ! -s /tmp/networks.tmp ]; then
rm /tmp/networks.tmp
errorout "no networks found."
fi
# otherwise print the menu
local IFS='='
echo "<openbox_pipe_menu>"
while read ESSID SECURITY QUALITY; do
echo "<item label=\"$ESSID ($SECURITY) ${QUALITY/.*/}%\">" # trim decimals
echo " <action name=\"Execute\">"
echo " <command>sudo $0 $INTERFACE connect \"$ESSID\"</command>"
echo " </action>"
echo "</item>"
done < /tmp/networks.tmp
echo "</openbox_pipe_menu>"
connect() {
# check for an existing profile
PROFILE_FILE="$(grep -REl "ESSID=[\"']?$ESSID[\"']?" "$PROFILE_DIR" | grep -v '~$' | head -n1)"
# if found use it, else create a new profile
if [ -n "$PROFILE_FILE" ]; then
PROFILE=$(basename "$PROFILE_FILE")
else
PROFILE="$ESSID"
SECURITY="$(awk -F '=' "/$ESSID/"'{print $2}' /tmp/networks.tmp | head -n1)"
# ask for the security key if needed
if [ "$SECURITY" != "none" ]; then
KEY="$(zenity --entry --title="Authentication" --text="Please enter $SECURITY key for $ESSID" --hide-text)"
fi
# create the new profile
create_profile "$ESSID" "$INTERFACE" "$SECURITY" "$KEY"
fi
# connect
netcfg2 "$PROFILE" >/tmp/output.tmp
# if failed, ask about removal of created profile
if [ $? -ne 0 ]; then
zenity --question \
--title="Connection failed" \
--text="$(grep -Eo "[\-\>]\ .*$" /tmp/output.tmp) \n Remove $PROFILE_FILE?" \
--ok-label="Remove profile"
[ $? -eq 0 ] && rm $PROFILE_FILE
fi
rm /tmp/output.tmp
rm /tmp/networks.tmp
[ $(id -u) -ne 0 ] && errorout "root access required."
[ -z "$1" ] && errorout "usage: $0 [interface]"
INTERFACE="$1"; shift
# i added a sleep if we need to explicitly bring it up
# b/c youll get "no networks found" when you scan right away
# this only happens if we aren't up already
if ! ifconfig | grep -q $INTERFACE; then
ifconfig $INTERFACE up &>/dev/null || errorout "$INTERFACE not up"
while ! ifconfig | grep -q $INTERFACE; do sleep 1; done
fi
if [ "$1" = "connect" ]; then
ESSID="$2"
connect
else
print_menu
fi
Screenshots
removed -- Hi-res shots available on my site
NOTE - i have not tested this extensively but it was working for me in most cases. any updates/fixes will be edited right into this original post. enjoy!
UPDATE - 10/24/2009: i moved the awk statement from wifi-select directly into the script. this did two things: wifi-select is no longer needed on the system, and i could tweak the awk statement to be more accurate. it now prints a true percentange. iwlist prints something like Quality=17/70 and the original awk statement would just output 17 as the quality. i changed to print (17/70)*100 then bash trims the decimals so you get a true percentage.
Last edited by brisbin33 (2010-05-09 01:28:20)froli wrote:
I think the script's not working ... When I type
sh wifi-pipe
in a term it returns nothing
well, just to be sure you're doing it right...
he above is only an adjustment to the OB script's print_menu() function, it's not an entire script to itself. so, if the original OB script shows output for you with
sh ./wifi-pipe
then using the above pint_menu() function (with all the other supporting code) should also show output, (only really only changes the echo's so they print the info in the pekwm format).
oh, and if neither version shows output when you rut it in a term, then you've got other issues... ;P
here's an entire [untested] pekwm script:
#!/bin/bash
# pbrisbin 2009
# simplified version of wifi-select designed to output as an pekwm pipe menu
# required:
# netcfg
# zenity
# NOPASSWD entries for this and netcfg through visudo
# the following in pekwm config file:
# SubMenu = "WiFi" {
# Entry = { Actions = "Dynamic /path/to/wifi-pipe" }
# the idea is to run this script once to scan/print, then again immediately to connect.
# therefore, if you scan but don't connect, a temp file is left in /tmp. the next scan
# will overwrite it, and the next connect will remove it.
# source this to get PROFILE_DIR and SUBR_DIR
. /usr/lib/network/network
errorout() {
echo "Dynamic {"
echo " Entry = \"$1\""
echo "}"
exit 1
create_profile() {
ESSID="$1"; INTERFACE="$2"; SECURITY="$3"; KEY="$4"
PROFILE_FILE="$PROFILE_DIR$ESSID"
cat > "$PROFILE_FILE" << END_OF_PROFILE
CONNECTION="wireless"
ESSID="$ESSID"
INTERFACE="$INTERFACE"
DESCRIPTION="Automatically generated profile"
SCAN="yes"
IP="dhcp"
TIMEOUT="10"
SECURITY="$SECURITY"
END_OF_PROFILE
# i think wifi-select should adopt these perms too...
if [ -n "$KEY" ]; then
echo "KEY=\"$KEY\"" >> "$PROFILE_FILE"
chmod 600 "$PROFILE_FILE"
else
chmod 644 "$PROFILE_FILE"
fi
print_menu() {
# scan for networks
iwlist $INTERFACE scan 2>/dev/null | awk -f $SUBR_DIR/parse-iwlist.awk | sort -t= -nrk3 > /tmp/networks.tmp
# exit if none found
if [ ! -s /tmp/networks.tmp ]; then
rm /tmp/networks.tmp
errorout "no networks found."
fi
# otherwise print the menu
echo "Dynamic {"
IFS='='
cat /tmp/networks.tmp | while read ESSID SECURITY QUALITY; do
echo "Entry = \"$ESSID ($SECURITY) $QUALITY%\" {"
echo " Actions = \"Exec sudo $0 $INTERFACE connect \\\"$ESSID\\\"\"</command>"
echo "}"
done
unset IFS
echo "}"
connect() {
# check for an existing profile
PROFILE_FILE="$(grep -REl "ESSID=[\"']?$ESSID[\"']?" "$PROFILE_DIR" | grep -v '~$' | head -n1)"
# if found use it, else create a new profile
if [ -n "$PROFILE_FILE" ]; then
PROFILE=$(basename "$PROFILE_FILE")
else
PROFILE="$ESSID"
SECURITY="$(awk -F '=' "/$ESSID/"'{print $2}' /tmp/networks.tmp | head -n1)"
# ask for the security key if needed
if [ "$SECURITY" != "none" ]; then
KEY="$(zenity --entry --title="Authentication" --text="Please enter $SECURITY key for $ESSID" --hide-text)"
fi
# create the new profile
create_profile "$ESSID" "$INTERFACE" "$SECURITY" "$KEY"
fi
# connect
netcfg2 "$PROFILE" >/tmp/output.tmp
# if failed, ask about removal of created profile
if [ $? -ne 0 ]; then
zenity --question \
--title="Connection failed" \
--text="$(grep -Eo "[\-\>]\ .*$" /tmp/output.tmp) \n Remove $PROFILE_FILE?" \
--ok-label="Remove profile"
[ $? -eq 0 ] && rm $PROFILE_FILE
fi
rm /tmp/output.tmp
rm /tmp/networks.tmp
[ $(id -u) -ne 0 ] && errorout "root access required."
[ -z "$1" ] && errorout "usage: $0 [interface]"
INTERFACE="$1"; shift
# i added a sleep if we need to explicitly bring it up
# b/c youll get "no networks found" when you scan right away
# this only happens if we aren't up already
if ! ifconfig | grep -q $INTERFACE; then
ifconfig $INTERFACE up &>/dev/null || errorout "$INTERFACE not up"
sleep 3
fi
if [ "$1" = "connect" ]; then
ESSID="$2"
connect
else
print_menu
fi
exit 0 -
How do I set miminum # of connections for pool with Oracle and Tomcat?
Hi,
I can't seem to find any attribute to initialize the number of connections for my connection pool. Here is my current context.xml file under my /App1 directory:
<Context path="/App1" docBase="App1"
debug="5" reloadable="true" crossContext="true">
<Resource name="App1ConnectionPool" auth="Container"
type="oracle.jdbc.pool.OracleDataSource"
driverClassName="oracle.jdbc.driver.OracleDriver"
factory="oracle.jdbc.pool.OracleDataSourceFactory"
url="jdbc:oracle:thin:@127.0.0.1:1521:oddjob"
user="app1" password="app1" />
</Context>
I've been googling and reading forums, but haven't found a way to establish the minimum number of connections. I've tried all sorts of parameters like InitialLimit, MinLimit, MinActive, etc, with no success.
Here is some sample code that I am testing:
package web;
import oracle.jdbc.pool.OracleDataSource;
import oracle.jdbc.OracleConnection;
import javax.naming.*;
import java.sql.SQLException;
import java.sql.ResultSet;
import java.sql.Statement;
import java.util.Properties;
public class ConnectionPool {
String message = "Not Connected";
public void init() {
OracleConnection conn = null;
ResultSet rst = null;
Statement stmt = null;
try {
Context initContext = new InitialContext();
Context envContext = (Context) initContext.lookup("java:/comp/env");
OracleDataSource ds = (OracleDataSource) envContext.lookup("App1ConnectionPool");
message = "Here.";
String user = ds.getUser();
if (envContext == null)
throw new Exception("Error: No Context");
if (ds == null)
throw new Exception("Error: No DataSource");
if (ds != null) {
message = "Trying to connect...";
conn = (OracleConnection) ds.getConnection();
Properties prop = new Properties();
prop.put("PROXY_USER_NAME", "adavey/xxx");
if (conn != null) {
message = "Got Connection " + conn.toString() + ", ";
conn.openProxySession(OracleConnection.PROXYTYPE_USER_NAME,prop);
stmt = conn.createStatement();
rst = stmt.executeQuery("SELECT username, server from v$session where username is not null");
while (rst.next()) {
message = "DS User: " + user + "; DB User: " + rst.getString(1) + "; Server: " + rst.getString(2);
rst.close();
rst = null;
stmt.close();
stmt = null;
conn.close(); // Return to connection pool
conn = null; // Make sure we don't close it twice
} catch (Exception e) {
e.printStackTrace();
} finally {
// Always make sure result sets and statements are closed,
// and the connection is returned to the pool
if (rst != null) {
try {
rst.close();
} catch (SQLException e) {
rst = null;
if (stmt != null) {
try {
stmt.close();
} catch (SQLException e) {
stmt = null;
if (conn != null) {
try {
conn.close();
} catch (SQLException e) {
conn = null;
public String getMessage() {
return message;
I'm using a utility to repeatedly call a JSP page that uses this class and displays the message variable. This utility allows me to specify the number of concurrent web requests and an overall number of requests to try. While that is running, I look at V$SESSION in Oracle and occassionaly, I will see a brief entry for app1 or adavey depending on the timing of my query and how far along the code has processed in this example. So it seems that I am only using one connection at a time and not a true connection pool.
Is it possible that I need to use the oci driver instead of the thin driver? I've looked at the javadoc for oci and the OCIConnectionPool has a setPoolConfig method to set initial, min and max connections. However, it appears that this can only be set via Java code and not as a parameter in my context.xml resource file. If I have to set it each time I get a database connection, it seems like it sort of defeats the purpose of having Tomcat maintain the connection pool for me and that I need to implement my own connection pool. I'm a newbie to this technology so I really don't want to go this route.
Any advice on setting up a proper connection pool that works with Tomcat and Oracle proxy sessions would be greatly appreciated.
Thanks,
AlanWell I did some more experiments and I am able to at least create a connection pool within my example code:
package web;
import oracle.jdbc.pool.OracleDataSource;
import oracle.jdbc.OracleConnection;
import javax.naming.*;
import java.sql.SQLException;
import java.sql.ResultSet;
import java.sql.Statement;
import java.util.Properties;
public class ConnectionPool {
String message = "Not Connected";
public void init() {
OracleConnection conn = null;
ResultSet rst = null;
Statement stmt = null;
try {
Context initContext = new InitialContext();
Context envContext = (Context) initContext.lookup("java:/comp/env");
OracleDataSource ds = (OracleDataSource) envContext.lookup("App1ConnectionPool");
message = "Here.";
String user = ds.getUser();
if (envContext == null)
throw new Exception("Error: No Context");
if (ds == null)
throw new Exception("Error: No DataSource");
if (ds != null) {
message = "Trying to connect...";
boolean cache_enabled = ds.getConnectionCachingEnabled();
if (!cache_enabled){
ds.setConnectionCachingEnabled(true);
Properties cacheProps = new Properties();
cacheProps.put("InitialLimit","5");
cacheProps.put("MinLimit","5");
cacheProps.put("MaxLimit","10");
ds.setConnectionCacheProperties(cacheProps);
conn = (OracleConnection) ds.getConnection();
Properties prop = new Properties();
prop.put("PROXY_USER_NAME", "adavey/xyz");
if (conn != null) {
message = "Got Connection " + conn.toString() + ", ";
conn.openProxySession(OracleConnection.PROXYTYPE_USER_NAME,prop);
stmt = conn.createStatement();
//rst = stmt.executeQuery("SELECT 'Success obtaining connection' FROM DUAL");
rst = stmt.executeQuery("SELECT user, SYS_CONTEXT ('USERENV', 'SESSION_USER') from dual");
while (rst.next()) {
message = "DS User: " + user + "; DB User: " + rst.getString(1) + "; sys_context: " + rst.getString(2);
message += "; Was cache enabled?: " + cache_enabled;
rst.close();
rst = null;
stmt.close();
stmt = null;
conn.close(OracleConnection.PROXY_SESSION); // Return to connection pool
conn = null; // Make sure we don't close it twice
} catch (Exception e) {
e.printStackTrace();
} finally {
// Always make sure result sets and statements are closed,
// and the connection is returned to the pool
if (rst != null) {
try {
rst.close();
} catch (SQLException e) {
rst = null;
if (stmt != null) {
try {
stmt.close();
} catch (SQLException e) {
stmt = null;
if (conn != null) {
try {
conn.close();
} catch (SQLException e) {
conn = null;
public String getMessage() {
return message;
In my context.xml file, I tried to specify the same Connection Cache Properties as attributes, but no luck:
<Context path="/App1" docBase="App1"
debug="5" reloadable="true" crossContext="true">
<Resource name="App1ConnectionPool" auth="Container"
type="oracle.jdbc.pool.OracleDataSource"
driverClassName="oracle.jdbc.OracleDriver"
factory="oracle.jdbc.pool.OracleDataSourceFactory"
url="jdbc:oracle:thin:@127.0.0.1:1521:oddjob"
user="app1" password="app1"
ConnectionCachingEnabled="1" MinLimit="5" MaxLimit="20"/>
</Context>
These attributes seemed to have no effect:
ConnectionCachingEnabled="1" ; also tried "true"
MinLimit="5"
MaxLimit="20"
So basically if I could find some way to get these attributes set within the context.xml file instead of my code, I would be a happy developer :-)
Oh well, it's almost Miller time here on the east coast. Maybe a few beers will help me find the solution I'm looking for. -
Cisco Jabber for Windows in Extend and Connect mode and making outbound calls
Hi guys,
I've set up Cisco Jabber for Windows to use Extend and Connect to control a remote PBX endpoint. I've configured the required CTI-RD device, remote destinations, associated the users to the line and added the devices to end-user controlled device. The extend and connect part is working flawlessly without any issues. I'm able to receive inbound calls on the remote PBX endpoint and control the call (hold, resume, transfer etc.) using the Jabber call window that pops up.
However, I'm unable to make any outbound calls via the Jabber client when in extend and Connect mode. Reading the Extend and Connect guide, I need to configure Dial Via Office (DVO) Reverse. So when the user initiates a Dial-Via-Office reverse call, CUCM calls and connect to the Extend and Connect device (CTI-RD). CUCM then calls and connects to the number the user dialled and finally connects the two call legs.
After attempting to configure DVO-R for Jabber for Windows in Extend and Connect mode following the CUCM feature services guide, i'm unable to get any outbound calls working. From RTMT, i am receiving the following Termination Cause Code: (27) Destination out of order. What i also notice is that there is no calling number for that trace either. I would've thought that the calling party would've been the Enterprise Feature Access (EFA) number.
Has anyone got this working or can provide some guidance?
Thanks.Hi guys,
I've set up Cisco Jabber for Windows to use Extend and Connect to control a remote PBX endpoint. I've configured the required CTI-RD device, remote destinations, associated the users to the line and added the devices to end-user controlled device. The extend and connect part is working flawlessly without any issues. I'm able to receive inbound calls on the remote PBX endpoint and control the call (hold, resume, transfer etc.) using the Jabber call window that pops up.
However, I'm unable to make any outbound calls via the Jabber client when in extend and Connect mode. Reading the Extend and Connect guide, I need to configure Dial Via Office (DVO) Reverse. So when the user initiates a Dial-Via-Office reverse call, CUCM calls and connect to the Extend and Connect device (CTI-RD). CUCM then calls and connects to the number the user dialled and finally connects the two call legs.
After attempting to configure DVO-R for Jabber for Windows in Extend and Connect mode following the CUCM feature services guide, i'm unable to get any outbound calls working. From RTMT, i am receiving the following Termination Cause Code: (27) Destination out of order. What i also notice is that there is no calling number for that trace either. I would've thought that the calling party would've been the Enterprise Feature Access (EFA) number.
Has anyone got this working or can provide some guidance?
Thanks. -
I have a problem.
I bought Pages and Numbers for my iMac and so far everything was OK.
Suddenly i have a problem with connection to iCloud.
Dokuments created on iMac in Pages or Numbers are not transfered to iCloud. Not uploaded to iCloud. There is a sign (small shape of iCloud), that they are waiting to be uploaded to iCloud.
I think the iCloud is OK.
i can see and manage documents in iCloud. i can create them on iPad and see them and delete them in iCloud.
But not on iMac.
i dont know what has happened and I am not abble to find the solution. It was OK till some days ago….I have a similar problem! Everything stopped working after upgrading to Mac OS 10.8.4 through the App Store. Help!
-
I know my passcode is correct but when I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
I am trying to connect Garritan Personal Symphony to Logic Express and Garageband. A dialog box pops up and asks for plugin Garritan-P. Where do I find it and what do I do with it. I can't locate this plugin doing searches on any of the porgrams.
I'm not sure which version of Garritan Personal Orchestra you have or when you are getting a window pop-up, but check this link for starters:
http://afjohnston.blogspot.com/2009/11/using-garritan-personal-orchestra-gpo.htm l -
I all,
the scenario is the following:
WIFI connection with TISCALI operator. Encryption made by WPA2 EAS with router SITECOM or tested also with another router DIGICOM with WPA TPK.
From December up to end of March the IPAD2 working perfectly serfing and downloading.
By two weeks it has a very strange behavour without have changed any configuration on IPAD or network:
with WIFI turned on it discover about 4 different ntw among them the mine, I successfully authenticate with psw the my ntw,
the IPAD2 start to run with Safari without problems, but after about 1 minutes, it stop to serf or download and answer that the Server cannot be reached or the page cannot be open, at the same time the signal is present on the icon of WIFI and it is strong.
This problem is systematic: If I dissasociate the ntw and then authenticate again I start to serf again for 1 minutes (more or less) and then it stops again, this occurs every time I authenticate the ntw after a disassociation.
I made some test changing the encryption from WPA2, WPA and also without encryption but the result was always the same, after about one minute the server seems to be for the IPAD2 no more reachable while the others PC and netbook connected to the same router continue to serf/download without problems!
I also tried to change the router with a DIGCOM that I did not use generally, but the behavour is always the same.
Since the IOS was the 4.3 revisin, I made the upgrade by means Itunes to IOS 5.1 succesfully installed.
But unfortunatelly all test repeted have had the same negative result with the same behavour!
Yesterday I tried to do the complete restore of the System but the tests had the same rsult.
I really don't know how to proceed, the problem started suddenly without any action from my side....is there someone that can help me?
Thanks MassimoLook at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Cheers, Tom
Maybe you are looking for
-
I cant get itunes to open on my laptop. I have windows 7 and I downloaded itunes again to see if that was the issue. No matter what i do it wont open. Any ideas?
-
Hi, We are using ECC 5.0 here. Our DB is Oracle 9.2.0.6 and OS is AIX. We have a problem here. Our Finance people run a report "S_ALR_87013542". It was working fine. But now it is giving an error with ABAP Dump. The error is MEMORY_NO_MORE_PAGING. I
-
Multiple inputs and outputs using DAQmx VIs
Hello, I am fairly new with the LabView programming language. I have a few training books that I have been reading, and I have been following online tutorials and reading the forums. However, I have come to a problem where I don’t see a clear solut
-
Getting error when trying to enable ssl over pop3
We are using SunOne Messaging Server v5.2 on Solaris 9 We followed the below steps: 1. Create a trust database password for "Internal (Software) Token" 2. Obtain a certificate 3. Install the certificate along with CA certificate. 4. The certificate i
-
Mystery Crashes Adobe Premiere CC
Hello everyone, I've been having an issues for a couple of months now with Adobe Premiere Creative Cloud version. Every single time I try to import videos for editing a crash happens soon after, specifically the instant that I click on the video thum