I have an IPA2 wifi 3g working fine with wifi up for 3 monthes then from two weeks it get connection but after 1 minutes stop to serf/download with signal and connection always present. With the same router are still connected others 3 pc working!
I all,
the scenario is the following:
WIFI connection with TISCALI operator. Encryption made by WPA2 EAS with router SITECOM or tested also with another router DIGICOM with WPA TPK.
From December up to end of March the IPAD2 working perfectly serfing and downloading.
By two weeks it has a very strange behavour without have changed any configuration on IPAD or network:
with WIFI turned on it discover about 4 different ntw among them the mine, I successfully authenticate with psw the my ntw,
the IPAD2 start to run with Safari without problems, but after about 1 minutes, it stop to serf or download and answer that the Server cannot be reached or the page cannot be open, at the same time the signal is present on the icon of WIFI and it is strong.
This problem is systematic: If I dissasociate the ntw and then authenticate again I start to serf again for 1 minutes (more or less) and then it stops again, this occurs every time I authenticate the ntw after a disassociation.
I made some test changing the encryption from WPA2, WPA and also without encryption but the result was always the same, after about one minute the server seems to be for the IPAD2 no more reachable while the others PC and netbook connected to the same router continue to serf/download without problems!
I also tried to change the router with a DIGCOM that I did not use generally, but the behavour is always the same.
Since the IOS was the 4.3 revisin, I made the upgrade by means Itunes to IOS 5.1 succesfully installed.
But unfortunatelly all test repeted have had the same negative result with the same behavour!
Yesterday I tried to do the complete restore of the System but the tests had the same rsult.
I really don't know how to proceed, the problem started suddenly without any action from my side....is there someone that can help me?
Thanks Massimo
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Cheers, Tom
Similar Messages
-
How do I make a 20 X 30 print with layers of 16 X 20, 12 X 18, 11 X 14, 8 X 12, 8 X 10, 5 X 7 and 4 X 6 of the same image to display the different sizes available to someone? Using Elements 13 with Windows 8.1
A senior citizen needs some help.
ThanksSaving each image as different size - is it an option for you? I would save images with their name as: 20x30.png, 16x20.png etc etc.
Or explain whether you want these in a webpage in which case only one image is necessary and different sizes are displayed with good CSS code. this is question for Dreamweaver forum if this is what you want. -
Suddenly, one of my iPhone libraries will not open with 86 gigs of images: it opens and says there are no photos, yet by other looking, all the images are there and when backing up, it takes an hour.
Somehow iPhoto application will not recognize the images (over 13,000) in the file.
Any suggestions as to how to fix the matter<
Dr. Harris, BermudaTo move from iPhoto 08 (which is v7) to iPhoto 11 (which is v9) requires that you purchase iPhoto 11. Your software update is running just fine. V7.1.5 is last version of iPhoto 08.
Never import one Library to another. Every version and thumbnail is imported like a distinct photo, you lose all your Albums, Keywords etc., the link between Original and Previews is destroyed, the non-destructive editing feature is ruined and so on. In summary: it's mess.
As to the problematic library:
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 08* library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption. -
Macbook 13 worked fine without a battery for months, suddenly no longer turns on
A couple years ago my friend gave me her old MacBook 13 computer. It was already old for her, so I'm not exactly the year it's from It has 10.6.8. Batteries for this MacBook and bootleg ones similar have a tendency of swelling, so I've had to buy a bootleg battery off Amazon and EBay a couple times. In April the battery had swelled up and I settled on just letting it run with out a battery so that I could save up to buy a better battery. It worked fine for five months, other than the obvious fact it had to remain plugged into the wall at all times and it was significantly slower. But it worked. Yesterday morning I booted up the laptop out of sleep mode and it went to my login screen and died. No warning, no systematic shut down, just black. This would usually only occur if it was unplugged from the wall, but everything was still plugged in. I checked the chord and it seems to be fully functional. I tried pressing the on button multiple times, it just wouldn't turn on. I left it plugged into the wall for about 2 hours and it miraculously started up with the start up noise and the grinding of the hard drive. I used it for the rest of the day for work, but then while typing up a document the same thing happened again, a shut down with no cause. I left it on the charger all night, hoping what happened before would happen again, but it's been over 12 hours and it's completely unresponsive. The adaptor is really hot and so is the part that is magnetic and attached to the computer itself.
I've ordered another bootleg battery, but it doesn't arrive for another two weeks. I have an online course at my university that I absolutely need access to my computer ASAP for. Is there anything I can do in the meantime, or is this purely a battery related issue that will be solved when my new battery arrives?A hard drive really shouldn't make grinding noises. It's possible the hard drive has given up on you. Notebook hard drives typically last 3-5 years, though some may last longer.
If you're near an Apple store, I would highly recommend you make an appointment and bring it in for the techs to evaluate. Diagnosis is free and they can give you an estimate for the cost to repair it.
~Lyssa -
I am new to ios & using 5C. I want to know where is all the media (Images, videos, Audio etc) received through Whatsapp are saved after downloading in Iphone. And also how to access the same.
These are user to user forums. You ARE NOT addressing Apple by posting here.
Also, why are you YELLING at us?? Stop using ALL CAPS.
What steps have you done to try and fix the problem? -
I have two ipod nanos. And i have 2 itunes accounts and we are accessing both accounts from the same PC. One of my ipod works fine, it gets detected as a device and sync fine. The other one does not. Anyone knows what this may be?
The music sync is one way - computer to ipod. The only exception is ituens purchases. The ipod is not a backup device.
Copy everything from the old computer or your backup copy of your old computer, to the new one. -
What can I expect of my 4s with wifi connectivity. My 4s receive a signal from the same router I have always used. My 3G would pick up a signal throughout the house, and my 4s won't allow me out of the room. Is my new phone defective or just inferior.
4S at my house have stronger antenna than 3G iPhone. Reset Network Settings, tap Settings App>General>Reset, near bottom>Reset Network Settings. If still problem take to Apple for Warranty Coverage.
-
I have a new Apple TV which is working fine except that I cannot access .mov files which are in my iTunes Library. How can I get to these? I can run them on my computer and select Apple TV on the screen, but the Apple TV goes to a black screen
Mov is a container format, you'd need to look at the codec used by the movie file inside the container to know whether it will work with the Apple TV or not.
-
My youtube app is no longer working on my iphone 3. Others, with the same phone, are not having the problem. It works occassionally, but it's unpredictable. I've updated phone software, deleted the app, re-downloaded the app, turned the phone off and on...nothing.
You may have debris in your headphone jack blocking the sensor. Try blowing hard on the jack, and inserting/removing your headphones quickly multiple times to clear it.
-
My battery reads that it is 100% charged. However, as soon as I unplug it, it dies instantly. The battery lights are still functional, and everything else is working fine! What's wrong with my battery?
Sounds like it may need to be replaced. Contact Apple.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
i have an iphone 4s and it just turned off and wouldnt turn back on until i got home and plugged it in to the mains. however it wont connect to my carrier and wont let me turn wifi on or use the internet. all my data is still in place. however when i disconnect from the charger it switches straight off immediately. it also just flashes up the apple icon (on 10 seconds, off 10 seconds.......) when i connect to either car charger or computer. it also resets itself every single time i turn it back on using the mains charger. please help me understand what is happening to my phone
is there anything apple could do if i took it to one of their main shops???
Kris (bulzy_23)Sounds like a hardware failure.
Make an appointment at the genius bar and take it in for them to look at. It will probably need to be replaced. -
My Iphone 5s shows "No Service" in the specific network area, but if the same sim card is used with other mobiles in the same network area, it shows good network.. i did restore,change sim card, reset all the settings but still not working... please help me..
Please do not double post a subject. Iphone 5S I answered your other thread.
-
When I share a video with fcpx and it goes to Quicktime, the last few seconds goes mute. I checked the clip and sent that the same route and all is fine. It is only when I send the whole 3gb video. Any ideas?
paul71054 wrote:
... Any ideas?
add a few seconds black to your project.
Try again.
could be some really weird codec problem, with 'cut' GOPs', .. somethin'... -
Hi i am working on my web site and it appears to have blocked the ip from my server i can't open my web sites and i cant open the server home page but can do this on my iPhone i have trend micro running on 2 other desk tops all from the same router please help maybe its a firewall? Cheers Dave
All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.
-
why my iphone 4 connect to wifi, but when i open safari and search something it say i not connect.. but in the same house my sister using iphone4 too but she can online with the same router. i go and check over the detail of the network i connected, over the ip address and subnet mask have the numbers, but over the DNS and router don't have any number...isit the problem???? i can online at any other place but just my home cant...y????
Hey confuddled_chica!
Try the steps in the article below to troubleshoot this issue:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for being a part of the Apple Support Communities!
Regards,
Braden
Maybe you are looking for
-
How can I get Flash to install please?
Hi, trying to install FP 11.7.700.169 on Imac OSX 10.6.8 with Safari 5.1.9. Have tried on numerous occasions over days. Downloads fine, click on icon, installs, says installed successfully. When I go to site requiring it, prompts me to install late
-
SQL Server 2014 - calling sp_setapprole failing
The corporation I work at has decided to start using the application role functionality in SQL Server. We are able to successfully implement the app roles into the application (PowerBuilder 12.1) when running against a SQL Server 2012 database, ho
-
What is this apple part # 922-8903
I'm working on repairing a Mac Pro I was given and was looking at part sites to find the parts I need, and there is one that I am not sure I need, and can't find the answer anywhere. Does anyone know what this is? It would seem that it is some sort o
-
SAPSCRIPT - how to prevent data printing without underline
Hi All, I am printing header text in script from label instructions maintained in delivery. In that, header text is declared inside the character format with underline tag. This text is getting printed in the MAIN window. After, this the entire data
-
Download helper addon doesn't download anymore. I have deleted it and re-installed but no luck. I am thinking the updte to 36.0 may be at the root of this. I realize you discourage users from reveting to older versions but I would really like downloa