VPN from WiTopia setting on Nokia Belle devices

Hallo!
Searched forums and found that the only provider of VPN services compatible with Nokia N8 and 808 PureView devices is WiTopia. In the discussions found that some users succeded to properly set the VPN policy files and enjoy VPN on their N8.
Happy VPN users who was lucky to get personal help frm IsmoK please share the knowlege.
I subscribed to WiTopia, I got the Gateway, Preshared key, downloaded Nokia Configuration Tool (NCC) and VPN policy file (My-mVPN-config.vpn) - but still can't clearly understand how to amend policy file with NCC.
Please share knowlege!

Dude! There's nothing wrong with headphones support in belle. Try a soft reset, nd a hard reset if soft doesn't work. Else, try reinstalling the firmware. Might help.

Similar Messages

Flash player problem for nokia belle devices

hey nokia family..
i am a user of nokia n8 and that is my favourite cell phone but now there is no update available for nokia belle devices and these devices do not support adobe flash player any more, even 808 pure view is one of the new devices by nokia but it is also unable to stream videos over net, so this is a request to nokia family that please do not forget his old customers and belle users and please give an update for these devices..
regards

Adobe are the ones who are in control of Flash for mobiles and they took the decision quite a long time ago to stop all support and development for Flash for all mobile devices.
You will not therefore be receiving any further support from anyone regarding Flash for your mobile devices.

About HTTP Internet mode setting for Nokia & Samsung devices.

Hi all,
I�ve a J2ME app. wich must run in several devices. I configured and tested it in my Motorola-V300 and SonyEricsson-K300a withow problems.
Now, I must do the same with Nokia and Samsung devices but, unfortunatelly I�ve not them in order to configure and try.
Motorola/SonyEricsson devices has a profile option where to setup "Internet Mode = HTTP" (no WAP) but I cannot findout in internet or phone manuals how to especify HTTP into Nokia and Samsung phones. I asked support teams here (Argentina) and they said me that it�s not possible and only wap is alowed. I cannot beleave it.
Please, could somebody tell me where/how to do it ??. It�s very important for my.
Lot of thanks in advance,
BlufsteinEJ.

try using wap seetings (apn)
see
http://forum.java.sun.com/thread.jspa?threadID=732967&start=15&tstart=0

Nokia Belle Refresh N8--Colorize IT

I am from India I have N8 (Product code--0599255) and I cannot find Colorize IT on my phone after update.Please anyone help me to find it where it is located in the phone.Please also tell me if anyone got this Colorize IT on there phone after the update...
Solved!
Go to Solution.

Hi all,
I have updated my N8-00 from Nokia Belle to Nokia Belle Refresh via Nokia Suite and the file was 306MB in size and after the update I did not get Microsoft Apps but received Nokia Maps though I had Nokia Maps Suite 2.0 installed before the Nokia Belle Refresh update and also I did not get the Colorize IT application also and I heard that Social was also updated to version1.5.234 but mine is still at 1.5.216.
Overall, my Nokia N8-00 has become more stable and performance in speed has increased with this update. I am from Kenya and received Nokia Belle Refresh shortly after Skyee announced that it is being rolled out on 27th August 2012.
Can anyone from Nokia or who has installed Nokia Belle Refresh confirm if Social was updated to version 1.5.234 or is it still at version 1.5.216 and also if Microsoft Apps were included in the Nokia Belle Refresh update after installation via Nokia Suite. Here is the Official Changelog from Nokia.
Thanks.
Ngwangwa - Six Million Ways To Die Choose One

From "Symbian Belle 111.030.0609" to "Nokia Belle"...

Dearest Nokia,
A lot of us have shed our heart, mind and soul in this forum, listing the critically required fixes for "Symbian Belle 111.030.0609".
You are saying that "Symbian Belle 111.030.0609" is great in many ways, but ALAS, it has crippled our devices.
Can we request you to publish a list of all the fixes to "Symbian Belle 111.030.0609" in the upcoming "Nokia Belle" update, in such a manner that all issues are fixed, and that no new tumours are caused?
Best regards,
E-Series Customer for 15 years
desperately waiting for an update from "Symbian Belle 111.030.0609" to "Nokia Belle" with all the fixes, and without any new tumours!

I am using Nokia belle 111.030.0609 for past few days and found some good things as well as bad things.
Good things are:-
1.Swipe lock feature
2.New camera features
3.Image editor inbuild
4.New keybboard
5.Hindi fonts
Bad things are:-
1.Battery life decreased.I am using Nokia battery monitor 3.1.Before update, it shown me Average use 52 hours ,Music playback time 37 hours but now it is showing Average use 34 hours ,Music playback time 18 hours.I charged my phone in night to 100% and when I check the battery in next morning, it shows 95%.I didn't configured any mail.No antivirus, no call recording application or any other application running then why battery is draining very quickly without using any application.
2.When i play any music or video file and icreased volume to 100%, it shows me "To prevet possible hearing damage,do not listen at high volume levels for long periods ot time". and i unable to listen music at full volume.Right now, i can listen music only with 50 % volumne.There is no option to diable it.
2.No button to use front camera
3.No back button when open camera
4.Unable to connect social(Facebbok,Twitter).When i tried to start it, it show "Unable to start"
5.No multiple mark check in gallery.Its very difficlt to transfer many files one by one to another mobile using bluetooth or NFC.
6.Unable to set any photos as wallpapaer using gallery.There should be an option to set a photo as wallpaper.
7.No video editor
8.Consuming more memory
Ih there aany way to downgrade the fiorware.I dont like the current firmware.
Thanks

ASA 5505 site to site VPN from a device 7.2 to a device 8.2

I'm trying to make some test with two ASA 5505; one has software version 7.2(4) the other 8.2.
I would like to make a sit to site VPN from the two device.
I followed the VPN site to site wizard on both machine with the correct parameters, but it does'n work.
Is it possible to make this kind of VPN between devices with different Software version? Or I should upg the older with 7.2 to 8.2 before ?
Thank for your help.
Marco

Tks Soeren for your help, these are some info about my test:
Cisco 1 (7.2) Ext 192.168.0.1
Int 192.168.11.50
Cisco 2 (8.2) Ext 192.168.0.2
Int 192.168.10.254
Common gateway 192.168.0.254
Both Ext interface of Cisco 1 & Cisco 2 are on a common switch, like the gateway.
These are SH run:
Cisco 1
ASA Version 7.2(4)
hostname DigiASA
domain-name ************
enable password ************* encrypted
passwd *************** encrypted
names
name 192.168.10.0 REMOTE-LAN
interface Vlan1
nameif inside
security-level 100
ip address 192.168.11.150 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 192.168.0.1 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
dns server-group DefaultDNS
domain-name *************
access-list acl_outbound extended permit tcp any host 192.168.0.1 eq ftp-data
access-list acl_outbound extended permit tcp any host 192.168.0.1 eq ftp
access-list acl_outbound extended permit tcp any host 192.168.0.1 eq https
access-list acl_outbound extended permit tcp any host 192.168.0.1 eq pop3
access-list acl_outbound extended permit tcp any host 192.168.0.1 eq www
access-list acl_inbound extended permit tcp 192.168.11.0 255.255.255.0 any eq www
access-list acl_inbound extended permit tcp 192.168.11.0 255.255.255.0 any eq ftp
access-list acl_inbound extended permit tcp 192.168.11.0 255.255.255.0 any eq ftp-data
access-list acl_inbound extended permit tcp 192.168.11.0 255.255.255.0 any eq smtp
access-list acl_inbound extended deny tcp any any eq www
access-list acl_inbound extended deny tcp any any eq ftp
access-list acl_inbound extended deny tcp any any eq ftp-data
access-list acl_inbound extended deny tcp any any eq smtp
access-list acl_inbound extended deny udp any eq tftp any
access-list acl_inbound extended deny tcp any eq 135 any
access-list acl_inbound extended deny udp any eq 135 any
access-list acl_inbound extended deny tcp any eq 137 any
access-list acl_inbound extended deny udp any eq netbios-ns any
access-list acl_inbound extended deny tcp any eq 138 any
access-list acl_inbound extended deny udp any eq netbios-dgm any
access-list acl_inbound extended deny tcp any eq netbios-ssn any
access-list acl_inbound extended deny udp any eq 139 any
access-list acl_inbound extended deny udp any eq 1080 any
access-list acl_inbound extended deny tcp any eq 445 any
access-list acl_inbound extended deny tcp any eq 593 any
access-list acl_inbound extended deny tcp any eq 3067 any
access-list acl_inbound extended deny tcp any eq 3127 any
access-list acl_inbound extended deny tcp any eq 4444 any
access-list acl_inbound extended deny tcp any eq 5554 any
access-list acl_inbound extended deny tcp any eq 9996 any
access-list acl_inbound extended deny tcp any eq 36794 any
access-list acl_inbound extended permit ip any any
access-list VPN extended permit ip 192.168.11.0 255.255.255.0 host 192.168.11.230
access-list VPN extended permit ip 192.168.11.0 255.255.255.0 host 192.168.11.231
access-list VPN extended permit ip 192.168.11.0 255.255.255.0 host 192.168.11.232
access-list VPN extended permit ip 192.168.11.0 255.255.255.0 host 192.168.11.233
access-list VPN extended permit ip 192.168.11.0 255.255.255.0 host 192.168.11.234
access-list VPN extended permit ip 192.168.11.0 255.255.255.0 host 192.168.11.235
access-list VPN extended permit ip 192.168.11.0 255.255.255.0 host 192.168.11.236
access-list VPN extended permit ip 192.168.11.0 255.255.255.0 host 192.168.11.237
access-list VPN extended permit ip 192.168.11.0 255.255.255.0 host 192.168.11.238
access-list VPN extended permit ip 192.168.11.0 255.255.255.0 host 192.168.11.239
access-list VPN extended permit ip 192.168.11.0 255.255.255.0 host 192.168.11.240
access-list inside_nat0_outbound extended permit ip 192.168.11.0 255.255.255.0 REMOTE-LAN 255.255.255.0
access-list SplitTunnelNets standard permit 192.168.11.0 255.255.255.0
access-list outside_1_cryptomap extended permit ip 192.168.11.0 255.255.255.0 REMOTE-LAN 255.255.255.0
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool Ext-IP 192.168.11.230-192.168.11.240 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-524.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface www 192.168.11.11 www netmask 255.255.255.255
static (inside,outside) tcp interface ftp 192.168.11.11 ftp netmask 255.255.255.255
static (inside,outside) tcp interface https 192.168.11.10 https netmask 255.255.255.255
access-group acl_inbound in interface inside
access-group acl_outbound in interface outside
route outside 0.0.0.0 0.0.0.0 192.168.0.254 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
http server enable
http 192.168.1.0 255.255.255.0 inside
http 192.168.11.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 set pfs group1
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto map outside_map 1 match address outside_1_cryptomap
crypto map outside_map 1 set pfs group1
crypto map outside_map 1 set peer 192.168.0.2
crypto map outside_map 1 set transform-set ESP-3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp nat-traversal 20
telnet 192.168.11.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
group-policy DIGI internal
group-policy DIGI attributes
dns-server value 192.168.11.1 213.140.2.21
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value SplitTunnelNets
default-domain value DIGI
username Marco password ***************** encrypted privilege 15
username Marco attributes
vpn-group-policy DIGI
tunnel-group DIGI type ipsec-ra
tunnel-group DIGI general-attributes
address-pool Ext-IP
default-group-policy DIGI
tunnel-group DIGI ipsec-attributes
pre-shared-key *
tunnel-group DIGIVPN type ipsec-l2l
tunnel-group DIGIVPN ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
prompt hostname context
Cisco 2
ASA Version 8.2(1)
hostname XFASA
domain-name ****************
enable password ***************** encrypted
passwd ***************** encrypted
names
name 192.168.11.0 REMOTE-LAN
interface Vlan1
nameif inside
security-level 100
ip address 192.168.10.254 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 192.168.0.2 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
dns server-group DefaultDNS
domain-name **************
access-list acl_outbound extended permit tcp any host 192.168.0.2 eq ftp-data
access-list acl_outbound extended permit tcp any host 192.168.0.2 eq ftp
access-list acl_outbound extended permit tcp any host 192.168.0.2 eq https
access-list acl_outbound extended permit tcp any host 192.168.0.2 eq pop3
access-list acl_outbound extended permit tcp any host 192.168.0.2 eq www
access-list acl_inbound extended permit tcp 192.168.10.0 255.255.255.0 any eq www
access-list acl_inbound extended permit tcp 192.168.10.0 255.255.255.0 any eq ftp
access-list acl_inbound extended permit tcp 192.168.10.0 255.255.255.0 any eq ftp-data
access-list acl_inbound extended permit tcp 192.168.10.0 255.255.255.0 any eq smtp
access-list acl_inbound extended deny tcp any any eq www
access-list acl_inbound extended deny tcp any any eq ftp
access-list acl_inbound extended deny tcp any any eq ftp-data
access-list acl_inbound extended deny tcp any any eq smtp
access-list acl_inbound extended deny udp any eq tftp any
access-list acl_inbound extended deny tcp any eq 135 any
access-list acl_inbound extended deny udp any eq 135 any
access-list acl_inbound extended deny tcp any eq 137 any
access-list acl_inbound extended deny udp any eq netbios-ns any
access-list acl_inbound extended deny tcp any eq 138 any
access-list acl_inbound extended deny udp any eq netbios-dgm any
access-list acl_inbound extended deny tcp any eq netbios-ssn any
access-list acl_inbound extended deny udp any eq 139 any
access-list acl_inbound extended deny udp any eq 1080 any
access-list acl_inbound extended deny tcp any eq 445 any
access-list acl_inbound extended deny tcp any eq 593 any
access-list acl_inbound extended deny tcp any eq 3067 any
access-list acl_inbound extended deny tcp any eq 3127 any
access-list acl_inbound extended deny tcp any eq 4444 any
access-list acl_inbound extended deny tcp any eq 5554 any
access-list acl_inbound extended deny tcp any eq 9996 any
access-list acl_inbound extended deny tcp any eq 36794 any
access-list acl_inbound extended permit ip any any
access-list SplitTunnelNets standard permit 192.168.10.0 255.255.255.0
access-list VPN extended permit ip 192.168.10.0 255.255.255.0 host 192.168.10.230
access-list VPN extended permit ip 192.168.10.0 255.255.255.0 host 192.168.10.231
access-list VPN extended permit ip 192.168.10.0 255.255.255.0 host 192.168.10.232
access-list VPN extended permit ip 192.168.10.0 255.255.255.0 host 192.168.10.233
access-list VPN extended permit ip 192.168.10.0 255.255.255.0 host 192.168.10.234
access-list VPN extended permit ip 192.168.10.0 255.255.255.0 host 192.168.10.235
access-list VPN extended permit ip 192.168.10.0 255.255.255.0 host 192.168.10.236
access-list VPN extended permit ip 192.168.10.0 255.255.255.0 host 192.168.10.237
access-list VPN extended permit ip 192.168.10.0 255.255.255.0 host 192.168.10.238
access-list VPN extended permit ip 192.168.10.0 255.255.255.0 host 192.168.10.239
access-list VPN extended permit ip 192.168.10.0 255.255.255.0 host 192.168.10.240
access-list outside_1_cryptomap extended permit ip 192.168.10.0 255.255.255.0 REMOTE-LAN 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.10.0 255.255.255.0 REMOTE-LAN 255.255.255.0
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool Ext-IP 192.168.10.230-192.168.10.240 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-621.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
access-group acl_inbound in interface inside
access-group acl_outbound in interface outside
route outside 0.0.0.0 0.0.0.0 192.168.0.254 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.1.0 255.255.255.0 inside
http 192.168.10.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map outside_dyn_map 20 set pfs group1
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto map outside_map 1 match address outside_1_cryptomap
crypto map outside_map 1 set pfs group1
crypto map outside_map 1 set peer 192.168.0.1
crypto map outside_map 1 set transform-set ESP-3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet 192.168.10.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
dhcpd address 192.168.10.50-192.168.10.150 inside
dhcpd dns 85.18.200.200 89.97.140.140 interface inside
dhcpd domain XFACTOR interface inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy XFA internal
group-policy XFA attributes
dns-server value 85.18.200.200
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value SplitTunnelNets
default-domain value XFDMN
username Marco password ************* encrypted privilege 15
username Marco attributes
vpn-group-policy XFA
username xfa password ************* encrypted privilege 0
username xfa attributes
vpn-group-policy XFA
tunnel-group XFA type remote-access
tunnel-group XFA general-attributes
address-pool Ext-IP
default-group-policy XFA
tunnel-group XFA ipsec-attributes
pre-shared-key *
tunnel-group DIGIVPN type ipsec-l2l
tunnel-group DIGIVPN ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
prompt hostname context
I hope you can find anything wrong, because I ddidn't find.
Thanks again
Marco

Cannot connect to L2TP VPN from iOS devices

This weekend I decided to perform a hard drive upgrade on my little 2009 Mac mini that I run as a homespun server as a hobby. In the process, I thought it would be worthwhile to flatten the whole thing and start again from fresh.
However, in doing so, I no longer seem to be able to connect to it's VPN from an iOS device. Both my iPhone 6 (iOS 8.1.3) and iPad 3rd Gen (iOS 8.1.3) cannot connect to the VPN server over an L2TP connection – either on my local network or over 3G, even if the local IP is provided instead of a host name.
Interestingly though, my MacBook Pro has no issues connecting over L2TP when tethered to my iPhone's 4G. It can dial back home and authenticate successfully.
The settings are exactly the same on both as both are governed under a single profile containing the VPN settings and login details.
It used to work before the hard drive upgrade, but can't remember the last time I used VPN on my iPhone. Just wondering if this is a bug in iOS 8.1.x?
iOS reports "The L2TP-VPN server did not respond". Additionally, there is absolutely nothing in the Server's console for VPN or 'racoon'. In the past when I've had issues, the connect is made but doesn't authenticate or some such. This just doesn't get to the server in any way shape or form.
Any ideas?

I believe the problem is in iOS, as I am experiencing the same issue.
I have a Yosemite Server running L2TP VPN server and my Mac connects flawless, while neither the iPhone nor the iPad (both 8.2) are able to connect.
The error is the same "The L2TP-VPN server did not respond" and by looking at the server's log it seems iOS didn't even try to connect.
I have tried changing the server address in iOS with the corresponding IP, but the results it's the same.
Maybe a network setting reset?

HT4847 I am unable to delete the last backup from icloud, i checked my all device setting but it still say "cannot delete icloud this time because it is in use,"Please tell me what should i do.

I am unable to delete the last backup from icloud, i checked my all device setting but it still say "cannot delete icloud this time because it is in use,"Please tell me what should i do

It still didn't work...
Within this commonfiles\apple folder, there is only one folder, labeled "Internet Services." Within this folder, there are 6 folders, labeled:
APLZOD.resources
BookmarkDAV_client.resources
CoreDAV.resources
iCloud.resources
iCloudServices.resources
ShellStreams.resources
Within all but CoreDAV and BookmarkDAV_client, there are multiple different folders, all labeled starting with a two letter (acronym I believe, for different languages) then .lproj (for example, a folder is labeled "ar.lproj".
In each of the folders of APLZOD.resources, there is a file labeled "APLZODlocalized.dll."
In all of the folders containing the multiple .lproj folders, there are likewise "name"localized.dll files contained.
In the BookmarkDAV_client and Core DAV folders, they each contain only one file, "Info.plist"
I attempted to delete all of these files, and still, the FileAssassin could not delete them. I unlocked one of them for instance, and I tried to delete the file myself (thru windows explorer and just clicking delete), and I still had the same issue of coming eventually to the window requesting me to "try again" to have permission.
What can I do?? I'd like to avoid Unlocker, but if it really is a reliable and SAFE program, and someone knows a SAFE place to download it from, I'd appreciate it very much so!!
thanks!!

Hi, I have an iTunes account on my laptop set up to work with my old iPod. I now have an iPad and new iPod but set up under a different account- can I put all the songs from my iTunes onto the new devices. Thanks.

Hi, I have an iTunes account on my laptop set up to work with my old iPod. I now have an iPad and new iPod but set up under a different account- can I put all the songs from my iTunes onto the new devices. Thanks.

Yes
Put all the music on one computer, make sure it is authorized for all accounts, sync.

HT201263 new iPad air. set it as new device. asked in itunes to restore from previous older iPad backup. it's not restored\i'm asked to do it agagin and again, in loop

new iPad air. set it as new device. asked in itunes to restore from previous older iPad backup. it's not restored\i'm asked to do it agagin and again, in loop
tried defining the iPad as new - the same problem. started it in recovery mode - the same

The definition of insanity.....
Does it ask for the old device by name? How do you know it isn't restored? Have you completed setup and checked on the device?
Are you using the same iTunes account and Apple ID?
On your iTunes account, Open preferences, go to devices tab
Look in the box for a backup of your old device. Is there a backup?
If there is no backup, you have nothing to restore.

My daughter disconnected her iPod nano from the lead before ejecting the device. It no longer syncs and we have re-set the device, but it now only occasionally appears on the computer screen any suggestions please?

My daughter disconnected her iPod nano from the lead before ejecting the device. It no longer syncs and we have re-set the device, but it now only occasionally appears on the computer screen any suggestions please?

Restoring the iPod will do nothing to his iPhone.
When you restore it wipes the iPod clean no matter what computer you use.
The only plus to doing it form your home computer is if you have a backup stored there, then you can restore from the backup once it's done wiping.
If you are away form your home computer, go ahead and use the computer you have to restore it, then when you get home, you can restore form any backup you may find. You can use this to help you do that when you get there: http://support.apple.com/kb/ht1766

How do i set up my iOS devices to see my mail folders from my Mac?

how do i set up my iOS devices to see my mail folders from my Mac?

Welcome to the Apple Community.
If your mail folders are actually "on my Mac" then your iOS devices cannot be set up to see them. However, if your mail folders are within your email service account and your email service is an IMAP account, then the folders should sync between devices.

Can't Print Photos from N8 since Nokia Belle upgra...

Hi all,
I have an N8 and a Fujifilm QS-70 printer. In the past I have been able to print photos directly from the phone to the printer by just going to the picture on my phone, and then selecting the print option. Since Nokia Belle installed, the Print option does not appear any more.
Does anyone know if I am doing something wrong or if Nokia Belle has removed the Print drivers...?
Any help would be appreciated.
Thanks!

Hi triv75,
Sorry to hear you are unable to perform a print since updating. How did you connect to the printer previously? was it by bluetooth?
Regards,
haZey
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

If I set my phone to receive Imessages with my phone number ONLY, will that prevent someone else from having them sent to their device?

If I set my phone to receive Imessages with my phone number ONLY, will that prevent someone else from having them sent to their device?

If I'm correct, as long as someone is logged into your Apple ID, they can receive your messages. If you think someone else is using your Apple ID, change your password.

Is there any option to degrade Nokia belle from C6...

can anyone help me to downgrade nokia belle from C6-01 as many software is not supporting with it. am not able to use FRING after i upgrade to Nokia belle plsss help somebody to rectify the issue

As a rule you are not permitted to downgrade software. However you can try your nearest Nokia care centre and try to give them sufficiently strong reason. They MAY agree to downgrade. Decision is solely dependent on them.
And yes, please dont fall prey to the tricks available on internet.
In Love With My C6-01:Now running on Nokia Belle!

VPN from WiTopia setting on Nokia Belle devices

Similar Messages

Maybe you are looking for