VPN - reserving Pool addresses

Hello there.
I have created a PPTP VPN on a cisco 3745 router, and a pool of addresses for the VPN clients. Now i want to find a way to reserve the addresses in the pool for specific machines, for example, if machine A connects to the VPN it should always be given the IP address a.a.a.a and that address should never be assigned to any other machine even if machine A is not connected to the VPN. Please help.
Thanks.

you can reserve the ip address for a particular user in the ACS. and you will have to authenticate for vpn via ACS. i have done this and it works perfectly.

Similar Messages

VPN IP Pool error

I just recently changed the IP pool for my VPN clients from class B to a class C.
I assinged 192.168.1.1-253 for the range.
I have a VPN client who is wireless and his netgear assigns him 192.168.1.2. He can validate on the VPN but cannot resolve names or IP's. I have other clients who have no issues.
Is it because his IP is the same net?
I also tried changing the IP pool to a different subnet. but then no one can connect.
what am I missing?

I am talking about a PIX 506E.
we had an internal IP scheme that was a public address range (130.1.X.X). We changed it over this prior weekend to a private 172.16.X.X address range.
The original IP Pool for the VPN clients was 172.16.0.1-253. We decided to seperate them to avoid any confusion. Since the change no user has had an issue but this one . He has connected before, but with the old VPN IP Pool addresses.
I asked him for an Ip config/all and noticed that his NIc was the same IP as the cisco VPN, and thought that was the issue. I also relized that any other home user with a router/access point will probably have the same problem at some point due to the default settings of those devices. So I decided to change the IP for the pool to 192.168.99.1-253. But this did not allow anyone to connect. I cannot resolve names or IPs until the pool is set to 192.168.1.1-253.
I do not have that command in my PIX. I am not a very PIX savy person. since we rarely touch it except in occasions like this.

Unable to access vpn box internal address after vpn

Hi all. My office network is protected by asa5510 firewall with vpn configured. When i vpn into my office network i could not access the firewall via the firewall's internal address using telnet etc even though i have already enable telnet. The firewall is my office network gateway. Below is my config. Pls advise. Thks in advance. Access to my office network is fine using vpn.
hostname firewall
domain-name default.domain.invalid
enable password xxx
names
dns-guard
interface Ethernet0/0
nameif inside
security-level 100
ip address 192.168.1x.x 255.255.255.0
interface Ethernet0/1
nameif DMZ
security-level 50
ip address 192.168.2x.x 255.255.255.0
interface Ethernet0/2
nameif outside
security-level 0
ip address 8x.x.x.x 255.255.255.240
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
management-only
passwd xxx
ftp mode passive
same-security-traffic permit inter-interface
access-list inside_access_in extended permit ip 192.168.1x.0 255.255.255.0 any
access-list outside_access_in extended permit icmp any any
access-list outside_access_in extended deny ip any any
access-list DMZ_access_in extended permit ip 192.168.2x.0 255.255.255.0 any
access-list inside_nat0_outbound extended permit ip any 172.16.0.0 255.255.255.224
access-list split-tunnel standard permit 192.168.1x.0 255.255.255.0
pager lines 24
logging enable
logging asdm-buffer-size 500
logging asdm informational
mtu inside 1500
mtu DMZ 1500
mtu outside 1500
mtu management 1500
ip local pool addpool 172.16.0.1-172.16.0.20 mask 255.255.0.0
no failover
monitor-interface inside
monitor-interface DMZ
monitor-interface outside
monitor-interface management
asdm image disk0:/asdm-507.bin
no asdm history enable
arp timeout 14400
nat-control
global (outside) 100 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 100 192.168.1x.0 255.255.255.0
access-group inside_access_in in interface inside
access-group DMZ_access_in in interface DMZ
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 8x.x.x.x 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00
timeout mgcp-pat 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
group-policy vpn internal
group-policy vpn attributes
dns-server value 192.168.1x.x 192.168.1x.x
split-tunnel-policy tunnelspecified
split-tunnel-network-list value split-tunnel
webvpn
username ciscoadm password xxx encrypted privilege 15
username ciscoadm attributes
vpn-group-policy vpn
webvpn
http server enable
http 192.168.1x.x 255.255.255.255 inside
http 192.168.1.0 255.255.255.0 management
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
sysopt connection tcpmss 13800
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
isakmp enable outside
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption 3des
isakmp policy 10 hash sha
isakmp policy 10 group 2
isakmp policy 10 lifetime 86400
tunnel-group vpn type ipsec-ra
tunnel-group vpn general-attributes
address-pool addpool
default-group-policy vpn
tunnel-group vpn ipsec-attributes
pre-shared-key *
telnet 192.168.1x.x 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0

Hi all. Below is my configuration. After i enable "management-access inside" i could access my firewall internal ip via ping after establishing vpn connection but not others like telnet even though "telnet 0.0.0.0 0.0.0.0 inside" is enabled. Pls advise.
interface Ethernet0/0
nameif inside
security-level 100
ip address 192.168.1x.254 255.255.255.0
interface Ethernet0/1
nameif DMZ
security-level 50
ip address 192.168.2x.254 255.255.255.0
interface Ethernet0/2
nameif outside
security-level 0
ip address 8x.xx.xx.xx 255.255.255.240
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
management-only
passwd xxx
ftp mode passive
same-security-traffic permit inter-interface
access-list inside_access_in extended permit ip 192.168.1x.0 255.255.255.0 any
access-list inside_access_in extended permit esp any any
access-list inside_access_in extended permit gre any any
access-list outside_access_in extended permit icmp any any
access-list outside_access_in extended deny ip any any
access-list DMZ_access_in extended permit ip 192.168.2x.0 255.255.255.0 any
access-list inside_nat0_outbound extended permit ip any 172.16.0.0 255.255.0.0
access-list split-tunnel standard permit 192.168.1x.0 255.255.255.0
access-list prod standard permit host 192.168.1x.x
access-list prod standard deny any
pager lines 24
logging enable
logging asdm-buffer-size 500
logging asdm informational
mtu inside 1500
mtu DMZ 1500
mtu outside 1500
mtu management 1500
ip local pool pool 172.16.0.1-172.16.0.20 mask 255.255.0.0
no failover
monitor-interface inside
monitor-interface DMZ
monitor-interface outside
monitor-interface management
asdm image disk0:/asdm-507.bin
no asdm history enable
arp timeout 14400
nat-control
global (outside) 100 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 100 192.168.1x.0 255.255.255.0
access-group inside_access_in in interface inside
access-group DMZ_access_in in interface DMZ
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 8x.xx.xx.xx 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00
timeout mgcp-pat 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
group-policy vpnuser internal
group-policy vpnuser attributes
dns-server value 192.168.1x.x 192.168.1x.x
split-tunnel-policy tunnelspecified
split-tunnel-network-list value prod
default-domain value mm.com
webvpn
username user password xxx encrypted privilege 15
username user attributes
vpn-group-policy vpnuser
webvpn
http server enable
http 192.168.1x.x 255.255.255.255 inside
http 0.0.0.0 0.0.0.0 inside
http 192.168.1.0 255.255.255.0 management
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
sysopt connection tcpmss 13800
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
isakmp enable outside
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption 3des
isakmp policy 10 hash sha
isakmp policy 10 group 2
isakmp policy 10 lifetime 86400
tunnel-group vpnuser type ipsec-ra
tunnel-group vpnuser general-attributes
address-pool pool
default-group-policy vpnuser
tunnel-group vpnuser ipsec-attributes
pre-shared-key *
telnet 0.0.0.0 0.0.0.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
management-access inside
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd dns 8x.x.1x.x 8x.x.x.x
dhcpd lease 3600
dhcpd ping_timeout 50
dhcpd enable management

Vpn-framed-ip-address not working with anyconnect

Hi Folks, please help me to verify if this case is a bug or a "not valid scenario".
Scenario:
ASA 5520, OS 9.1, SSL VPN with Anyconnect v3.x, static ip address for the client, and RSA token authentication (all the users/pin/passwords are in the RSA server, not in the ASA, but i need to create some users in the ASA in order to apply the vpn-framed-ip-address attribute for specific users).
In fact the anyconnect ssl vpn with RSA auth works fine, the ssl connection works, the user is authenticated, the anyconnect works, traffic passing, BUT.. the anyconnect its getting an ip address from the ip local pool INSTEAD of the static ip defined with the vpn-framed-ip-address command.
I'm trying to assign a static ip address for a user (defined locally on the ASA) that performs auth via RSA (aaa-server), by using the vpn-framed-ip-address command as an attribute for this local user. But it seems the command is not working.
Already I´ve tried to resolve (with no success) by entering the
no vpn-addr-assign aaa
no vpn-addr-assign dhcp
vpn-addr-assign local
Also i´ve tried by removing the pool from tunnel-group in order to force all the connection session to use the static ip address, but in this case, the anyconnect sends a message "No Address Available for SVC Connection". Meaning the ASA simply is ignoring the vpn-framed-ip-address command.
Its supposed the ASA implement the policies in this order, DAP > User policy > UserGrp policy > ConnProfile > DefGrpPolicy, and according to this, the vpn-framed-ip-address command should take effect first since its specified as User policy, overriding everything else. But its not working.
At this point i think the issue is... since the user is locally defined but its password its being authenticated via RSA (not local), the user attributes (static ip) are being ignored by the ASA because its not expecting to receive an ip address from the aaa server (RSA), so jumps to the next policies falling to the pool. Anyway the user policies attributes SHOULD work according to cisco.
Please your advise, or tell if its a bug? or a not valid scenario for this command to work with the ASA.
This is the current config:
ip local pool PoolSSL 192.168.229.10-192.168.229.19 mask 255.255.255.0
aaa-server RSA protocol sdi
aaa-server RSA (inside) host 192.168.12.1
retry-interval 5
no vpn-addr-assign aaa
no vpn-addr-assign dhcp
group-policy GroupPolicyABC internal
group-policy GroupPolicyABC attributes
wins-server none
dns-server value 192.168.61.1 192.168.61.2
vpn-tunnel-protocol ssl-client
group-lock value TunnelGroupABC
split-tunnel-policy tunnelspecified
split-tunnel-network-list value ServersDB
default-domain value my.domain.com
split-tunnel-all-dns disable
webvpn
anyconnect ask none default anyconnect
username USER1 password xHhacRZ56Uadqoq encrypted
username USER1 attributes
vpn-framed-ip-address 192.168.229.7 255.255.255.0
group-lock value TunnelGroupABC
tunnel-group TunnelGroupABC type remote-access
tunnel-group TunnelGroupABC general-attributes
address-pool PoolSSL
authentication-server-group RSA
default-group-policy GroupPolicyABC
tunnel-group TunnelGroupABC webvpn-attributes
group-alias AccessToDB enable
I´ll wait for your answers, regards!

https://tools.cisco.com/bugsearch/bug/CSCtf71671/
you need AAA assignment, or at least you needed to have it a couple of years back.

Vpn-framed-ip-address issue

Hi Guys,
I'm using a cisco 5510 ASA at the headoffice to provide the VPN (remote access vpn) connectivity to the branch offices.
My local network is - 192.168.30.0 /24 and I've used a part of same segment for the vpn_pool as well ( i.e 192.168.30.152 -192.168.30.199). Further I'm using the vpn-framed-ip-address feature to allocate an unique ip address for each branch office when it connects.
My problem is, though this setup worked fine at the begining, now sometimes when the vpn connections are established from remote branches, they take different ip addresses from the allocated vpn pool, rather than the specific ip address which is mentioned under the vpn-framed-ip-address command.
Can anyone assist me with this issue?
Regards,
Suthakar

Hi Javier,
I think I have found out a solution for this problem.
I've removed the ip vpn pool and its reference under tunnel group general-attributes
ip local pool vpn_pool x.x.x.x - x.x.x.x
tunnel-group x.x.x.x general-attributes
address-pool vpn_pool
since there is no ip-pool, now the remote client's are getting the exact individual ip addresses allocated for them with the vpn-framed-ip-address command.
Thank you for your support.
Regards,
Suthakar

OS X 10.6.7 not getting reserved DHCP address from router.

I have a MacBook Pro running OS X 10.6.7
My router is NetGear WGT624v3. I have the router setup to assign out reserved DHCP address for my Macs.
I am not getting the reserved address, but rather "any" address in the pool.
Other types of devices are getting the reserved address. For example, old windows computers, and my Android phone. Only the Mac computers seem to be getting the incorrect addresses.
Any ideas please?
Duane

As long as it shows up in the Windows Boot Camp control panel I'd say fine, happened to a lot of people - I have not had Windows 7 show in Mac Startup Disk control panel for years in my Mac Pro.

How to use Reserved IP Addresses

Where in the Azure Dashboard do I request a Reserved IP Addresses for my Cloud Services?
Jacob

Hi,
As far as I know, we can't reserve cloud services's IP address in azure portal.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Resource_manager_plan and Reserved pool size parameter changing every time

Hello All,
In my production database (Oracle 11g RAC )Resource_manager_plan and Reserved pool size parameter changing every time .
Below is my question .
This parameter changed automatically or it require manual intervention .
In what case this parameter changed if it automatically changed.
I had checked dba_hist_parameter a, dba_Hist_snapshot b table for parameter changed history parameter changed .
This parameter linked with process and sql performances?.
Please help me . Thanks .
Regards
Ranjeet

When scheduler window opens, its resource plan becomes active. For example, MONDAY_WINDOW begins on monday at 22:00. At this time current plan is changed to DEFAULT_MAINTENANCE_PLAN. At 00:00 (Tuesday) plan that was active before monday 22:00, becomes active. DEFAULT_MAINTENANCE_PLAN is used for Autotask clients :
select client_name,WINDOW_GROUP from DBA_AUTOTASK_CLIENT ;
CLIENT_NAME                     WINDOW_GROUP
auto optimizer stats collection ORA$AT_WGRP_OS
auto space advisor              ORA$AT_WGRP_SA
sql tuning advisor              ORA$AT_WGRP_SQ
select * from DBA_SCHEDULER_WINGROUP_MEMBERS where WINDOW_GROUP_NAME in (select WINDOW_GROUP from DBA_AUTOTASK_CLIENT);
WINDOW_GROUP_NAME WINDOW_NAME
ORA$AT_WGRP_OS    MONDAY_WINDOW
ORA$AT_WGRP_OS    TUESDAY_WINDOW
ORA$AT_WGRP_OS    WEDNESDAY_WINDOW
ORA$AT_WGRP_OS    THURSDAY_WINDOW
ORA$AT_WGRP_OS    FRIDAY_WINDOW
ORA$AT_WGRP_OS    SATURDAY_WINDOW
ORA$AT_WGRP_OS    SUNDAY_WINDOW
ORA$AT_WGRP_SA    MONDAY_WINDOW
ORA$AT_WGRP_SA    TUESDAY_WINDOW
ORA$AT_WGRP_SA    WEDNESDAY_WINDOW
ORA$AT_WGRP_SA    THURSDAY_WINDOW
ORA$AT_WGRP_SA    FRIDAY_WINDOW
ORA$AT_WGRP_SA    SATURDAY_WINDOW
ORA$AT_WGRP_SA    SUNDAY_WINDOW
ORA$AT_WGRP_SQ    MONDAY_WINDOW
ORA$AT_WGRP_SQ    TUESDAY_WINDOW
ORA$AT_WGRP_SQ    WEDNESDAY_WINDOW
ORA$AT_WGRP_SQ    THURSDAY_WINDOW
ORA$AT_WGRP_SQ    FRIDAY_WINDOW
ORA$AT_WGRP_SQ    SATURDAY_WINDOW
ORA$AT_WGRP_SQ    SUNDAY_WINDOW

Cannot set reserved DHCP addresses on WRT54GS ?

Is it correct that users cannot assign reserved DHCP addresses to hosts on their LAN with the WRT54GS ?

Yes. Correct. It does not support this. Not with standard firmware.

HT4899 Is there a way I can delete my primary @me email address so that I can receive emails only via my "reserved" @icloud address. The reason being, I receive a fair bit of spam to my @me address. Going forward I plan on using an alias for certain websi

Is there a way I can delete my primary @me email address so that I can receive emails only via my "reserved" @icloud address. eg. delete "msjones@me" and receive emails via "msjones@icloud" only.The reason being, I receive a fair bit of spam to my @me address. Going forward I plan on using an alias for certain websites to minimise this problem.

You can't delete the address, but you can set up a Rule to move messages to that address to the Trash or another folder. Go to http://icloud.com and go to the Mail page, click the cogwheel icon at top right and choose 'Rules'.
It's a bad idea to post your email address - it's an invitation to spam - even though in fact you haven't posted them in full; I've asked the hosts to remove them.

Reserve IP address?

Hi everybody,
I just upgraded my Netgear WGT624 router to a Linksys WRT54G2 v1. awesome router! On the Netgear web interface, I was able to reserve IP address to a mac address. Is it possible to reserve IP to a mac address on Linksys? I've notice that my IP keeps changing from 192.168.1.2 to 192.168.1.3
Thanks

What exactly you mean by reserve IP address??? please clarify...give some more information about the network??

Which free email program can I use to create a reserve email address for use with a Mozilla browser?

Hello,
Since it took over an hour to send an email from my gmail address the other night andsince I have tried unsuccessfully to create an @outlook.com address in Internet Explorer 8 I would like to use Mozilla to create a free reserve email address. Is it possible to do this in Mozilla instead of using Google Chrome or Internet Explorer 8? Thank you for helping a real dummie when it concerns creating a reserve email address.
Kind regards,
Edwin

Enter yahoo.com in the address bar and then navigate from the Yahoo home page. You may want to bookmark the login or mail page, or make it your home page, for easier access.
* [[How to use bookmarks to save and organize your favorite websites]]
* [[How to set the home page]]

Reserved ip address for vpn client ?

I need to find a way to have the 10.8 server vpn service give the same ip address when a vpn client connects, is this possible?
By default, every time a client connects, then disconnects and connects again they will get the next incremental ip address in the ip address pool set in the vpn server configuration

If you eliminate the pool and use just one IP address, technically that should work however, only one client at a time can connect to the VPN server. Would that work for you?

Cisco ASA 5505 VPN Anyconnect no address assignment

I have a problem with ip assigment via anyconnect. I always get the message no assigned address via anyconnect. I assigned to my profile for vpn a address pool, but it's still not working. Here is my config:
hostname firewall
domain-name ITTRIPP.local
enable password 8K8UeTZ9KV5Lvofo encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
names
ip local pool 192.168.178.0 192.168.178.151-192.168.178.171 mask 255.255.255.255
ip local pool net-10 10.0.0.1-10.0.0.10 mask 255.255.255.0
ip local pool SSL-POOL 172.16.1.1-172.16.1.254 mask 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
switchport access vlan 3
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
description Private Interface
nameif inside
security-level 100
ip address 192.168.178.10 255.255.255.0
ospf cost 10
interface Vlan2
description Public Interface
nameif outside
security-level 0
ip address 192.168.177.2 255.255.255.0
ospf cost 10
interface Vlan3
description DMZ-Interface
nameif dmz
security-level 0
ip address 10.10.10.2 255.255.255.0
boot system disk0:/asa914-k8.bin
ftp mode passive
dns domain-lookup inside
dns domain-lookup outside
dns domain-lookup dmz
dns server-group DefaultDNS
name-server 192.168.178.3
name-server 192.168.177.1
domain-name ITTRIPP.local
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network 192.168.178.x
subnet 192.168.178.0 255.255.255.0
object network NETWORK_OBJ_192.168.178.0_26
subnet 192.168.178.0 255.255.255.192
object service teamviewer
service tcp source eq 5938
object service smtp_tls
service tcp source eq 587
object service all_tcp
service tcp source range 1 65535
object service udp_all
service udp source range 1 65535
object network NETWORK_OBJ_192.168.178.128_26
subnet 192.168.178.128 255.255.255.192
object network NETWORK_OBJ_10.0.0.0_28
subnet 10.0.0.0 255.255.255.240
object-group service Internet-udp udp
description UDP Standard Internet Services
port-object eq domain
port-object eq ntp
port-object eq isakmp
port-object eq 4500
object-group service Internet-tcp tcp
description TCP Standard Internet Services
port-object eq www
port-object eq https
port-object eq smtp
port-object eq 465
port-object eq pop3
port-object eq 995
port-object eq ftp
port-object eq ftp-data
port-object eq domain
port-object eq ssh
port-object eq telnet
object-group user DM_INLINE_USER_1
user LOCAL\admin
user LOCAL\lukas
user LOCAL\sarah
object-group service DM_INLINE_TCP_1 tcp
port-object eq ftp
port-object eq ftp-data
port-object eq ssh
object-group service 192.168.178.network tcp
port-object eq 5000
port-object eq 5001
object-group service DM_INLINE_SERVICE_1
service-object object smtp_tls
service-object tcp destination eq imap4
service-object object teamviewer
object-group service DM_INLINE_SERVICE_2
service-object object all_tcp
service-object object udp_all
object-group service DM_INLINE_SERVICE_3
service-object object all_tcp
service-object object smtp_tls
service-object object teamviewer
service-object object udp_all
service-object tcp destination eq imap4
object-group service vpn udp
port-object eq 1701
port-object eq 4500
port-object eq isakmp
object-group service openvpn udp
port-object eq 1194
access-list NAT-ACLs extended permit ip 192.168.178.0 255.255.255.0 any
access-list inside-in remark -=[Access Lists For Outgoing Packets from Inside in                                                                                                                    terface]=-
access-list inside-in extended permit udp 192.168.178.0 255.255.255.0 any object                                                                                                                    -group Internet-udp
access-list inside-in extended permit tcp 192.168.178.0 255.255.255.0 any object                                                                                                                    -group Internet-tcp
access-list inside-in extended permit icmp 192.168.178.0 255.255.255.0 any
access-list inside-in extended permit udp 192.168.178.0 255.255.255.0 any eq sip
access-list inside-in extended permit object-group DM_INLINE_SERVICE_1 192.168.1                                                                                                                    78.0 255.255.255.0 any
access-list inside-in extended permit object-group DM_INLINE_SERVICE_2 192.168.1                                                                                                                    78.0 255.255.255.0 any
access-list outside-in remark -=[Access Lists For Incoming Packets on OUTSIDE in                                                                                                                    terface]=-
access-list outside-in extended permit icmp any 192.168.178.0 255.255.255.0 echo                                                                                                                    -reply
access-list outside-in extended permit tcp object-group-user DM_INLINE_USER_1 an                                                                                                                    y host 192.168.178.95 object-group DM_INLINE_TCP_1
access-list outside-in extended permit tcp any host 192.168.178.95 object-group                                                                                                                     192.168.178.network
access-list outside-in extended permit tcp any 192.168.178.0 255.255.255.0 eq si                                                                                                                    p
access-list AnyConnect_Client_Local_Print extended deny ip any4 any4
access-list AnyConnect_Client_Local_Print extended permit tcp any4 any4 eq lpd
access-list AnyConnect_Client_Local_Print remark IPP: Internet Printing Protocol
access-list AnyConnect_Client_Local_Print extended permit tcp any4 any4 eq 631
access-list AnyConnect_Client_Local_Print remark Windows' printing port
access-list AnyConnect_Client_Local_Print extended permit tcp any4 any4 eq 9100
access-list AnyConnect_Client_Local_Print remark mDNS: multicast DNS protocol
access-list AnyConnect_Client_Local_Print extended permit udp any4 host 224.0.0.                                                                                                                    251 eq 5353
access-list AnyConnect_Client_Local_Print remark LLMNR: Link Local Multicast Nam                                                                                                                    e Resolution protocol
access-list AnyConnect_Client_Local_Print extended permit udp any4 host 224.0.0.                                                                                                                    252 eq 5355
access-list AnyConnect_Client_Local_Print remark TCP/NetBIOS protocol
access-list AnyConnect_Client_Local_Print extended permit tcp any4 any4 eq 137
access-list AnyConnect_Client_Local_Print extended permit udp any4 any4 eq netbi                                                                                                                    os-ns
access-list dmz_access_in remark -=[Access Lists For Outgoing Packets from DMZ i                                                                                                                    nterface]=-
access-list dmz_access_in extended permit object-group DM_INLINE_SERVICE_3 10.10                                                                                                                    .10.0 255.255.255.0 any
access-list dmz_access_in extended permit icmp 10.10.10.0 255.255.255.0 any
access-list dmz_access_in extended permit tcp 10.10.10.0 255.255.255.0 any objec                                                                                                                    t-group Internet-tcp
access-list dmz_access_in extended permit udp 10.10.10.0 255.255.255.0 any objec                                                                                                                    t-group Internet-udp
pager lines 24
logging enable
logging buffer-size 30000
logging buffered debugging
logging asdm informational
mtu inside 1500
mtu outside 1500
mtu dmz 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (inside,outside) source static any any destination static NETWORK_OBJ_192.16                                                                                                                    8.178.0_26 NETWORK_OBJ_192.168.178.0_26 no-proxy-arp route-lookup
nat (dmz,outside) source static any any destination static NETWORK_OBJ_192.168.1                                                                                                                    78.0_26 NETWORK_OBJ_192.168.178.0_26 no-proxy-arp route-lookup
nat (inside,outside) source static any any destination static NETWORK_OBJ_192.16                                                                                                                    8.178.128_26 NETWORK_OBJ_192.168.178.128_26 no-proxy-arp route-lookup
nat (inside,outside) source static any any destination static NETWORK_OBJ_10.0.0                                                                                                                    .0_28 NETWORK_OBJ_10.0.0.0_28 no-proxy-arp route-lookup
object network 192.168.178.x
nat (inside,outside) dynamic interface
nat (dmz,outside) after-auto source dynamic 192.168.178.x interface
access-group inside-in in interface inside
access-group outside-in in interface outside
access-group dmz_access_in in interface dmz
route outside 0.0.0.0 0.0.0.0 192.168.177.1 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server ITTRIPP protocol ldap
aaa-server ITTRIPP (inside) host 192.168.178.3
ldap-base-dn CN=Users,DC=ITTRIPP,DC=local
ldap-scope subtree
ldap-naming-attribute sAMAccountName
ldap-login-password *****
ldap-login-dn CN=Administrator,DC=ITTRIPP,DC=local
server-type microsoft
user-identity default-domain LOCAL
eou allow none
aaa authentication telnet console LOCAL
aaa authentication http console LOCAL
aaa authentication ssh console LOCAL
aaa local authentication attempts max-fail 5
http server enable
http 192.168.178.0 255.255.255.0 inside
http redirect outside 80
http redirect inside 80
http redirect dmz 80
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transport
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-A                                                                                                                    ES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-A                                                                                                                    ES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES2                                                                                                                    56 AES192 AES 3DES DES
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto map dmz_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map dmz_map interface dmz
crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map inside_map interface inside
crypto ca trustpoint ASDM_TrustPoint0
enrollment self
subject-name CN=firewall
crl configure
crypto ca trustpoint ASDM_TrustPoint1
enrollment self
fqdn l1u.dyndns.org
email [email protected]
subject-name CN=l1u.dyndns.org,OU=VPN Services,O=ITTRIPP,C=DE,St=NRW,L=PLBG,EA=                                                                                                                    [email protected]
serial-number
crl configure
crypto ca trustpool policy
crypto ca certificate chain ASDM_TrustPoint0
certificate 6a871953
    308201cf 30820138 a0030201 0202046a 87195330 0d06092a 864886f7 0d010105
    0500302c 3111300f 06035504 03130866 69726577 616c6c31 17301506 092a8648
    86f70d01 09021608 66697265 77616c6c 301e170d 31343033 30373039 31303034
    5a170d32 34303330 34303931 3030345a 302c3111 300f0603 55040313 08666972
    6577616c 6c311730 1506092a 864886f7 0d010902 16086669 72657761 6c6c3081
    9f300d06 092a8648 86f70d01 01010500 03818d00 30818902 818100c0 8f17fa6c
    2f227dd9 9d2856e1 b1f8193b 13c61cfe 2d6cbf94 62373535 71db9ac7 5f4ad79f
    7594cfef 1360d88d ad3c69c1 6e617071 c6629bfa 3c77c2d2 a59b1ce1 39ae7a44
    3f8c852d f51d03c1 d9924f7c 24747bbb bf79af9a 68365ed8 7f56e58c a37c7036
    4db983e0 414d1b5e a8a2226f 7c76f50d d14ca714 252f7fbb d4a23d02 03010001
    300d0609 2a864886 f70d0101 05050003 81810019 0d0bbce4 31d9342c 3965eb56
    4dde42e0 5ea57cbb a79b3542 4897521a 8a6859c6 daf5e356 9526346d f13fb344
    260f3fc8 fca6143e 25b08f3d d6780448 3e0fdf6a c1fe5379 1b9227b1 cee01a20
    aa252698 6b29954e ea8bb250 4310ff96 f6c6f0dc 6c7c6021 3c72c756 f7b2e6a1
    1416d222 0e11ca4a 0f0b840a 49489303 b76632
quit
crypto ca certificate chain ASDM_TrustPoint1
certificate 580c1e53
    308202ff 30820268 a0030201 02020458 0c1e5330 0d06092a 864886f7 0d010105
    05003081 c3312230 2006092a 864886f7 0d010901 16136d61 696c406c 31752e64
    796e646e 732e6f72 67310d30 0b060355 04071304 504c4247 310c300a 06035504
    0813034e 5257310b 30090603 55040613 02444531 10300e06 0355040a 13074954
    54524950 50311530 13060355 040b130c 56504e20 53657276 69636573 31173015
    06035504 03130e6c 31752e64 796e646e 732e6f72 67313130 12060355 0405130b
    4a4d5831 3533345a 30575430 1b06092a 864886f7 0d010902 160e6c31 752e6479
    6e646e73 2e6f7267 301e170d 31343033 31353036 35303535 5a170d32 34303331
    32303635 3035355a 3081c331 22302006 092a8648 86f70d01 09011613 6d61696c
    406c3175 2e64796e 646e732e 6f726731 0d300b06 03550407 1304504c 4247310c
    300a0603 55040813 034e5257 310b3009 06035504 06130244 45311030 0e060355
    040a1307 49545452 49505031 15301306 0355040b 130c5650 4e205365 72766963
    65733117 30150603 55040313 0e6c3175 2e64796e 646e732e 6f726731 31301206
    03550405 130b4a4d 58313533 345a3057 54301b06 092a8648 86f70d01 0902160e
    6c31752e 64796e64 6e732e6f 72673081 9f300d06 092a8648 86f70d01 01010500
    03818d00 30818902 818100c0 8f17fa6c 2f227dd9 9d2856e1 b1f8193b 13c61cfe
    2d6cbf94 62373535 71db9ac7 5f4ad79f 7594cfef 1360d88d ad3c69c1 6e617071
    c6629bfa 3c77c2d2 a59b1ce1 39ae7a44 3f8c852d f51d03c1 d9924f7c 24747bbb
    bf79af9a 68365ed8 7f56e58c a37c7036 4db983e0 414d1b5e a8a2226f 7c76f50d
    d14ca714 252f7fbb d4a23d02 03010001 300d0609 2a864886 f70d0101 05050003
    81810087 8aca9c2b 40c9a326 4951c666 44c311b6 5f3914d5 69fcbe0a 13985b51
    336e3c1b ae29c922 c6c1c29d 161fd855 984b6148 c6cbd50f ff3dde66 a71473c4
    ea949f87 b4aca243 8151acd8 a4a426d1 7a434fbd 1a14bd90 0abe5736 4cd0f21b
    d194b3d6 9ae45fab 2436ccbf d59d6ba9 509580a0 ad8f4131 39e6ccf1 1b7a125d
    d50e4e
quit
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 enable inside client-services port 443
crypto ikev2 enable outside client-services port 443
crypto ikev2 enable dmz client-services port 443
crypto ikev2 remote-access trustpoint ASDM_TrustPoint1
crypto ikev1 enable outside
crypto ikev1 policy 10
authentication crack
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 20
authentication rsa-sig
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 30
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 40
authentication crack
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 50
authentication rsa-sig
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 60
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 70
authentication crack
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 80
authentication rsa-sig
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 90
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 100
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 110
authentication rsa-sig
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 120
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 130
authentication crack
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 140
authentication rsa-sig
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 150
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 65535
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet 192.168.178.0 255.255.255.0 inside
telnet timeout 5
ssh 192.168.178.0 255.255.255.0 inside
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
no vpn-addr-assign aaa
no vpn-addr-assign local
no ipv6-vpn-addr-assign aaa
dhcp-client update dns server both
dhcpd update dns both
dhcpd address 192.168.178.100-192.168.178.150 inside
dhcpd dns 192.168.178.3 192.168.177.1 interface inside
dhcpd wins 192.168.178.3 interface inside
dhcpd domain ITTRIPP.local interface inside
dhcpd update dns both interface inside
dhcpd option 3 ip 192.168.178.10 interface inside
dhcpd option 4 ip 192.168.178.3 interface inside
dhcpd option 6 ip 192.168.178.3 192.168.177.1 interface inside
dhcpd option 66 ip 192.168.178.95 interface inside
dhcpd enable inside
dhcpd address 192.168.177.100-192.168.177.150 outside
dhcpd dns 192.168.178.3 192.168.177.1 interface outside
dhcpd wins 192.168.178.3 interface outside
dhcpd domain ITTRIPP.local interface outside
dhcpd update dns both interface outside
dhcpd option 3 ip 192.168.177.2 interface outside
dhcpd option 4 ip 192.168.178.3 interface outside
dhcpd option 6 ip 192.168.178.3 interface outside
dhcpd enable outside
dhcpd address 10.10.10.100-10.10.10.150 dmz
dhcpd dns 192.168.178.3 192.168.177.1 interface dmz
dhcpd wins 192.168.178.3 interface dmz
dhcpd domain ITTRIPP.local interface dmz
dhcpd update dns both interface dmz
dhcpd option 3 ip 10.10.10.2 interface dmz
dhcpd option 4 ip 192.168.178.3 interface dmz
dhcpd option 6 ip 192.168.178.3 interface dmz
dhcpd enable dmz
threat-detection basic-threat
threat-detection statistics
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 averag                                                                                                                    e-rate 200
tftp-server inside 192.168.178.105 /volume1/data/tftp
ssl encryption 3des-sha1
ssl trust-point ASDM_TrustPoint0
ssl trust-point ASDM_TrustPoint1 outside
ssl trust-point ASDM_TrustPoint1 dmz
ssl trust-point ASDM_TrustPoint0 dmz vpnlb-ip
ssl trust-point ASDM_TrustPoint1 inside
ssl trust-point ASDM_TrustPoint0 inside vpnlb-ip
ssl trust-point ASDM_TrustPoint0 outside vpnlb-ip
webvpn
enable inside
enable outside
enable dmz
file-encoding 192.168.178.105 big5
csd image disk0:/csd_3.5.2008-k9.pkg
anyconnect image disk0:/anyconnect-linux-3.1.03103-k9.pkg 1
anyconnect image disk0:/anyconnect-macosx-i386-3.1.03103-k9.pkg 2
anyconnect image disk0:/anyconnect-win-3.1.03103-k9.pkg 3
anyconnect profiles SSL-Profile_client_profile disk0:/SSL-Profile_client_profil                                                                                                                    e.xml
anyconnect enable
tunnel-group-list enable
mus password *****
group-policy DfltGrpPolicy attributes
wins-server value 192.168.178.3
dns-server value 192.168.178.3 192.168.177.1
dhcp-network-scope 192.168.178.0
vpn-tunnel-protocol ikev2 ssl-client ssl-clientless
default-domain value ITTRIPP.local
split-dns value ITTRIPP.local
webvpn
anyconnect firewall-rule client-interface public value outside-in
anyconnect firewall-rule client-interface private value inside-in
group-policy GroupPolicy_SSL-Profile internal
group-policy GroupPolicy_SSL-Profile attributes
wins-server value 192.168.178.3
dns-server value 192.168.178.3 192.168.177.1
vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec ssl-client ssl-clientless
default-domain value ITTRIPP.local
webvpn
anyconnect profiles value SSL-Profile_client_profile type user
username sarah password PRgJuqNTubRwqXtd encrypted
username admin password QkbxX5Qv0P59Hhrx encrypted privilege 15
username lukas password KGLLoTxH9mCvWzVI encrypted
tunnel-group DefaultWEBVPNGroup general-attributes
address-pool SSL-POOL
secondary-authentication-server-group LOCAL
authorization-server-group LOCAL
tunnel-group DefaultWEBVPNGroup ipsec-attributes
ikev1 trust-point ASDM_TrustPoint0
ikev1 radius-sdi-xauth
tunnel-group SSL-Profile type remote-access
tunnel-group SSL-Profile general-attributes
address-pool SSL-POOL
default-group-policy GroupPolicy_SSL-Profile
tunnel-group SSL-Profile webvpn-attributes
group-alias SSL-Profile enable
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
class class-default
user-statistics accounting
service-policy global_policy global
mount FTP type ftp
server 192.168.178.105
path /volume1/data/install/microsoft/Cisco
username lukas
password ********
mode passive
status enable
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DD                                                                                                                    CEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:998674b777e5fd1d3a131d93704ea0e1
Any idea why it's not working?

You've got a lot going on there but I'd focus on the line "no vpn-addr-assign local". Per the command reference that tells the ASA NOT to use the local pool.
By the way, DHCP on the outside interface looks very counter-intutive, as does enabling VPN on all interfaces over every protocol.

Correlating VPN assigned IP address with particular users - CSACS and ASA

We have an ASA running 7.0(6)8 and use CSACS v4.1
For remote access, we have VPN groups set-up on the ASA. Our remote users connect to our network, are authenticated via the CSACS server, then are assigned an IP address from the relevant address pool on the ASA.
At the moment, I can use "show uauth" on the ASA to determine which user has been assigned a particular IP address, as long as they are currently connected.
But, what I'd like to be able to do is determine which user had an IP address at a particular time in the past.
E.g. if our device logs show activity from a particular IP address, I'd like to be able to trace back to find out which user had been assigned that IP address at the time.
Can anyone suggest how I might achieve this? I'm guessing that I need to set-up some sort of accounting between the ASA and the CSACS server but I'm not really sure what exactly is required.
Any help/advice would be appreciated. Thanks.

hi, thanks for the advice, that sounds good.
Do you know the exact commands required to achieve this on the ASA? It doesn't seem to have the same set of aaa commands as found on e.g. an IOS router so I'm not entirely sure what to configure.
E.g. on my ASA, the aaa accounting options are:
aaa accounting ?
configure mode commands/options:
command Specify this keyword to allow command accounting to be configured
for all administrators on all consoles
enable Enable
exclude Exclude the service, local and foreign network which needs to be
authenticated, authorized, and accounted
include Include the service, local and foreign network which needs to be
authenticated, authorized, and accounted
match Specify this keyword to configure an ACL to match
serial Serial
ssh SSH
telnet Telnet

VPN - reserving Pool addresses

Similar Messages

Maybe you are looking for