VPN to connect automatically on login (using OSX client) ? ? ? ?

is there a way to make my VPN connection to connect automatically on login ?
(so its connects on startup)
im using Apple built in VPN client. . . .

An application that is in the login items will bounce in the dock so how would expect a user not to know it is running.
As you can start n stop a vpn service via the command line you could configure a launchd process to start a script.
To easily create launchd processes you can use lingon
This hint Accessing a VPN (PPTP) via the command line could be used to write a bash shell script.
Or you could install a 3rd party command line vpn client see this hint Install vpnc as a replacement for the Cisco VPN client
This would be done in the background.

Similar Messages

How to connect from java without using oracle client installation

hi ,
Please tell me how to connect from java without using oracle client
Thanks & Regars

http://www.orafaq.com/wiki/JDBC#Thin_driver

Is there any way to config iws6.0 to connect to LDAP directory using SSL client and server authentication. Only SSL server authentication worked when I tried.

As my previous question, I followed the following instructions to setup up connection between iws and an LDAP server.
"Using SSL to Communicate with LDAP
You should require your Administration Server to communicate with LDAP using SSL. To enable SSL on your Administration Server, perform the following steps:
1.Access the Administration Server and choose the Global Settings tab.
2.Click the Configure Directory Service link.
3.Select Yes to use Secure Sockets Layer (SSL) for connections.
4.Click Save Changes.
5.Click OK to change your port to the standard port for LDAP over SSL. "
Q1. Any other steps needed to setup client authentication (or mutual authentication)?
Q2. Do I need to enable security for connection groups in order to have this setup to work?

Check out:
http://docs.iplanet.com/docs/manuals/enterprise/60sp1/ag/esecurty.htm#1008113
You will need to turn on Client Auth as described above. Hope it helps.

Unable to connect SOAP to RFC using soap client.

I have tested the SOAP to RFC sync scenario today using a soap client.I have encountered the following error at the SOAP sender channel.
"java.lang.NullPointerException
at com.sap.aii.af.sdk.xi.mo.xmb.XMBMessageOperator.getQualityOfServiceAsString"
the only possible solution found till now through forum is to apply SAP NOTE 1239995. As it is confirmed that SAP note 1239995 is already in the system , request you to post it to SAP for getting any OASIS note . I am also posting the message to SDN forum to get some help.
We are able to connect to the integration server, but are unable to connect through the communication channel.
Is there any othere OASIS notes need to be applied here? Or any other information is need which i am missing ?
regards,
Abhishek

You are in the right track. Looks like you need latest service pack for the soap channel. Follow this thread...
ADAPTER.JAVA_EXCEPTION XMBMessageOperator.getQualityOfServiceAsString error
This link says
Error in sending XML from SoapUI to SAP PI 7.11
This patch level will fix SAPXIAF06P patch #6 (SP-level #06)
Edited by: Baskar Gopal on Apr 5, 2011 4:33 PM

Wifi does not connect automatically after sleep

Since installing Yosemite on my Mid 2011 iMac - when my computer wakes from sleep mode, it does not automatically connect to the wifi. I have to select the network to join from the top menu bar. Is there anyway to make it connect automatically like it use to? Thanks for any and all help!

Hello ffmed124,
The steps detailed below can help get your iMac to reconnect to your Wi-Fi network automatically after waking from sleep.
Check your TCP/IP settings in the Network pane of the System Preferences. Click the "Renew DHCP lease" button
Choose System Preferences from the Apple menu.
Choose Network from the View menu.
Select Wi-Fi, then click the Advanced button in the lower-left hand corner of the screen.
Click the TCP/IP tab from the top of the screen.
Click the "Renew DHCP lease" button.
Select the Wi-Fi tab and view your Preferred Networks list.
Select each network and click the minus (-) sign to remove those networks from your Preferred Networks list.
Click OK and close the Network preferences.
Remove your stored network passwords using the Keychain Access Utility.
Open Keychain Access from /Applications/Utilities. Your window will look like this:
Remove your AirPort network passwords from the login keychain: Select the "login" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password".
Remove your AirPort network passwords from the System keychain: Select the "System" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password".Note: The above steps will remove your Wi-Fi network passwords. If you do not know them, or if your network does not use passwords to restrict access, you should contact your network administrator.
Restart your computer.
Join your Wi-Fi network. You will need to enter your password for your network again if it requires one.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Cheers,
Allen

Connect to Oracle using DAC Client in command line

Hi,
I'm trying to connect to Oracle DB using DAC client. I have configured a connection and tested, it works. When I use the connection to connect to the DB, its giving me an error
"unknown error, please start in command line mode and see the stack error"
How do I start in command line mode? Could anyone provide more information on this.
Thanks in advance,
RK

In oracle db, you can create 3 different types of users:
(1) create user x identified by pwd.
In this case the user x will connect to the db using username/password, in this example x/pwd
(2)create user ex identified externally;
In this case the user ex will connect to the db using "/" and the sqlnet.authentication_services parameter value in the client and server sqlnet.ora will be used in determining the oracle external authentication adapter to use. For oracle windows client/db server, this is by default set to NTS. NTS is the oracle windows authentication adapter.
(3)create user gx identified globally as 'CN=gx,O=Oracle';
In this case also the user gx will connect to the db using "/" and oracle ssl will be used to authenticate this user to the db.
It would not be possible to "Create user x identified externally" and connect with x/pwd.
Please clarify.
To help you in isolating the problem, I will need the following info:
(1)
what are you connecting as to execute your plsql. Are you using sqlplus ? How are you connecting (connect "/ as sysdba", connect "/", connect x/pwd) ?
(2)
what create user statement did you use to create the user
(3)
is odp.net and the db server on the same machine.
(4)
did you run your plsql from the same machine as the db server.
(5)
if odp.net is on a different machine than db server, did you try connecting from odp.net machine to db server, using sqlplus ?

ORA-12154: TNS:could not resolve the connect identifier specified using TOAD client

I try to using connect with remote database using TOAD client. My oracle version is 10.2g. I follow these instructions that specified on this link, instead of step 13, because i cant understand what they explain http://http://avangari.wordpress.com/remote-oracle-database-access-using-instant-client-and-toad/ . My Oracle TNS_ADMIN path is C:\oracle\product\10.2.0\db_1\network\ADMIN and ORACLE_HOME is C:\oracle\product\10.2.0\db_1. I found many question regarding this query, but i am not found my answer.

948021 wrote:
I try to using connect with remote database using TOAD client. My oracle version is 10.2g. I follow these instructions that specified on this link, instead of step 13, because i cant understand what they explain http://http://avangari.wordpress.com/remote-oracle-database-access-using-instant-client-and-toad/ . My Oracle TNS_ADMIN path is C:\oracle\product\10.2.0\db_1\network\ADMIN and ORACLE_HOME is C:\oracle\product\10.2.0\db_1. I found many question regarding this query, but i am not found my answer.
see: http://edstevensdba.wordpress.com/2011/02/26/ora-12154tns-03505/ (ora-12154 TNS:could not resolve the connect identifier specified)
And for background info
see: http://edstevensdba.wordpress.com/2011/02/09/sqlnet_overview/ (Help! I can’t connect to my database )
see: http://edstevensdba.wordpress.com/2011/02/16/sqlnet_client_cfg/ ( Help! I can’t connect to my database (part duex) )

How to create and configure proxies in ADF mobile using OWSM client agent?

Hi
Can anyone please tell me how to create and configure proxies in ADF mobile application using Oracle Web Services Manager (OWSM) Lite Mobile ADF Application Agent. I read it in mobile document that,
For secured web services, the user credentials are dynamically injected using ADF Mobile uses Oracle Web Services Manager (OWSM) Lite Mobile ADF Application Agent to create and configure proxies, as well as to request services through the proxies. The user credentials are injected into the OWSM enforcement context when proxies are configured.
I am new with this OWSM, can anyone please give me some hints like how to proceed further for implementing authentication using OWSM lite mobile ADF Application Agent??
Thanks in advance
Raj

Hi Juan
The demo is very useful, and in that Shay describes about the remote login using a regular ADF webapplication as a secured one and deploying it into the server. But I would like to know how to create a local login using OWSM client agent? .
Without creating a regular ADF webapplication, how can i call secured webservices(i.e., by using OWSM client agent how to create and configure proxies to call secured webservice, where the user credentials are injected into webservice request by OWSM client as mentioned in ADF mobile document)??
Regards
Raj

TS4209 This just began to happen with my IMAC. I am using OSX v. 10.8.2. At first I was able to restart (something I don't do normally) and wi-fi would reconnect. Now I have to use the diagnostic on the page when it does not load to connect, any thoughts?

My IMAC running OSX 10.8.2 has reciently stopped automatically connecting to the internet using wi-fi following a period of being asleep. I have attempted to restart the IMAC which corrected it for a time. Next I followed the instructions on the help page regarding issues with not connecting on wake up. That only corrected the problem within the session. There are no recient downloads available to address this issue, however there are earlier versions which were suppose to address this, is this a new issue or was the old one never fixed. Note I have never had this problem before and I did reboot the wi-fi router, which only corrected the problem for a short period. I do not have the problem with other devices connected (PC Laptop, PC, apple TV and older IPOD touch).
Thanks.

Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
10.4 instructions...
Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.

Lion can not connect to smb if use root login

I found if use root account login lion, that can't connect to smb but use other account ok.who can help me take a look?

This might help. I have a Seagate Dockstar (Pogoplug w/samba) with attached drives connected to my network that was easily discoverable with Bonjour in Snow.
From my experience -
I got the SMB share working (sort of) in Lion 10.7
While the network hub and connected drive(s) won't automatically appear as a Connected Server, or Bonjour Computer I was able to find the Dockstar by going to -
Go/Connect to Server and then enter it's specific info - smb://fabx2d09fe (my device's actual number was different than this).
The dialog pops up for name and password - or connect as Guest. I couldn't remember if I had set these so tried Guest and was able to access/mount the drive on the desktop and sucessfully read/write to/from it.
I may have to always connect to recent servers to get the thing to mount so it's not as automatic as Bonjour in the sidebar - but it does work!
This mostly solved the issue for my needs....maybe it would work for yours?

Vpn-asa 5505 - connects fine, can't use resources

Using Remote Client VPN to access internal Lan behind an ASA 5505 device. The connection is working fine. But once I connect, I can't access any computer shared folders etc.   The only thing I can do is access the ASA 5505 through the ASDM 7.1    I can only ping the device 10.0.0.1 but nothing else.    The funny thing is that this was working fine, then in an attempt to speed up the VPN ACCESS (it is pretty slow), I went into the ASDM configuration software to look around.   Didn't think I changed anything, but now, it's not working.   Here is a copy of the backup cpg.
Any ideas.   Please respond with ASDM COMMANDS.. I'm a novice at the command line stuff.
Thanks.
-brett
config:
: Saved
: Written by enable_15 at 09:19:26.379 UTC Sat Feb 15 2014
ASA Version 9.1(4)
hostname ciscoasa
domain-name hnedu.com
enable password mnpTCRVkk1.ZjiWJ encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd 2KFQnbNIdI.2KYOU encrypted
names
ip local pool VPNUsers 10.0.0.80-10.0.0.99 mask 255.255.0.0
interface Ethernet0/0
switchport access vlan 2
speed 100
duplex full
interface Ethernet0/1
speed 100
duplex full
interface Ethernet0/2
speed 100
duplex full
interface Ethernet0/3
speed 100
duplex full
interface Ethernet0/4
speed 100
duplex full
interface Ethernet0/5
speed 100
duplex full
interface Ethernet0/6
speed 100
duplex full
interface Ethernet0/7
speed 100
duplex full
interface Vlan1
nameif inside
security-level 100
ip address 10.0.0.1 255.255.0.0
interface Vlan2
description External Connection
no forward interface Vlan1
nameif outside
security-level 0
ip address 209.117.123.226 255.255.255.224
boot system disk0:/asa914-k8.bin
ftp mode passive
dns domain-lookup inside
dns domain-lookup outside
dns server-group DefaultDNS
name-server 10.0.0.2
name-server 10.0.0.4
domain-name hnedu.com
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network obj-10.0.0.0
subnet 10.0.0.0 255.255.0.0
object network obj-10.0.0.64
subnet 10.0.0.64 255.255.255.192
object network obj-10.0.0.6
host 10.0.0.6
object network obj-10.0.3.48
host 10.0.3.48
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network NETWORK_OBJ_10.0.0.64_26
subnet 10.0.0.64 255.255.255.192
object-group network RDP_static
object-group service RemoteDesktop tcp-udp
description Windows Remote Desktop Access
port-object eq 3389
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
access-list inside_access_in extended permit ip any4 any4
access-list Napoleons_splitTunnelAcl standard permit 10.0.0.0 255.255.0.0
access-list inside_nat0_outbound extended permit ip 10.0.0.0 255.255.0.0 10.0.0.64 255.255.255.192
access-list outside_access_in extended permit tcp any4 host 10.0.0.6 eq www
access-list outside_access_in remark remote desktop to cproom desktop
access-list outside_access_in extended permit object-group TCPUDP any4 host 10.0.3.48 eq 3389
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-715-100.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (inside,any) source static obj-10.0.0.0 obj-10.0.0.0 destination static obj-10.0.0.64 obj-10.0.0.64 no-proxy-arp route-lookup
object network obj-10.0.0.6
nat (inside,outside) static 209.117.123.227
object network obj-10.0.3.48
nat (inside,outside) static 209.117.123.228
object network obj_any
nat (inside,outside) dynamic interface
access-group inside_access_in in interface inside control-plane
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 209.117.123.225 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 192.168.1.0 255.255.255.0 inside
http 10.0.0.0 255.255.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map inside_map interface inside
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto ca trustpool policy
crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
    308205ec 308204d4 a0030201 0202106e cc7aa5a7 032009b8 cebcf4e9 52d49130
    0d06092a 864886f7 0d010105 05003081 ca310b30 09060355 04061302 55533117
    30150603 55040a13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
    13165665 72695369 676e2054 72757374 204e6574 776f726b 313a3038 06035504
    0b133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
    20617574 686f7269 7a656420 75736520 6f6e6c79 31453043 06035504 03133c56
    65726953 69676e20 436c6173 73203320 5075626c 69632050 72696d61 72792043
    65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
    30303230 38303030 3030305a 170d3230 30323037 32333539 35395a30 81b5310b
    30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
    496e632e 311f301d 06035504 0b131656 65726953 69676e20 54727573 74204e65
    74776f72 6b313b30 39060355 040b1332 5465726d 73206f66 20757365 20617420
    68747470 733a2f2f 7777772e 76657269 7369676e 2e636f6d 2f727061 20286329
    3130312f 302d0603 55040313 26566572 69536967 6e20436c 61737320 33205365
    63757265 20536572 76657220 4341202d 20473330 82012230 0d06092a 864886f7
    0d010101 05000382 010f0030 82010a02 82010100 b187841f c20c45f5 bcab2597
    a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
    9c688b2e 957b899b 13cae234 34c1f35b f3497b62 83488174 d188786c 0253f9bc
    7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
    15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
    63cd1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8
    18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
    4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
    81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 02030100 01a38201 df308201
    db303406 082b0601 05050701 01042830 26302406 082b0601 05050730 01861868
    7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1d130101
    ff040830 060101ff 02010030 70060355 1d200469 30673065 060b6086 480186f8
    45010717 03305630 2806082b 06010505 07020116 1c687474 70733a2f 2f777777
    2e766572 69736967 6e2e636f 6d2f6370 73302a06 082b0601 05050702 02301e1a
    1c687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
    03551d1f 042d302b 3029a027 a0258623 68747470 3a2f2f63 726c2e76 65726973
    69676e2e 636f6d2f 70636133 2d67352e 63726c30 0e060355 1d0f0101 ff040403
    02010630 6d06082b 06010505 07010c04 61305fa1 5da05b30 59305730 55160969
    6d616765 2f676966 3021301f 30070605 2b0e0302 1a04148f e5d31a86 ac8d8e6b
    c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
    69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
    1b311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301d0603
    551d0e04 1604140d 445c1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355
    1d230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300d0609
    2a864886 f70d0101 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80
    4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
    b2227055 d9203340 3307c265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
    6decd018 7d494aca 99c71928 a2bed877 24f78526 866d8705 404167d1 273aeddc
    481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
    b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
    5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
    6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
    6c2527b9 deb78458 c61f381e a4c4cb66
quit
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev1 enable inside
crypto ikev1 enable outside
crypto ikev1 policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
management-access inside
vpn-addr-assign local reuse-delay 5
vpn-sessiondb max-other-vpn-limit 10
vpn-sessiondb max-anyconnect-premium-or-essentials-limit 2
dhcp-client update dns server none
dhcpd dns 10.0.0.2 10.0.0.4
dhcpd wins 10.0.0.2 10.0.0.4
dhcpd domain hnedu.com
dhcpd option 5 ip 10.0.0.2 10.0.0.4 interface inside
dhcpd option 6 ip 10.0.0.2 10.0.0.2 interface inside
dhcprelay server 10.0.0.2 inside
dhcprelay server 10.0.0.4 inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol ikev1 ikev2 ssl-clientless
group-policy Napoleons internal
group-policy Napoleons attributes
wins-server value 10.0.0.2 10.0.0.4
dns-server value 10.0.0.2 10.0.0.4
vpn-tunnel-protocol ikev1 l2tp-ipsec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value Napoleons_splitTunnelAcl
default-domain value hnedu.com
group-policy Napoleon internal
group-policy Napoleon attributes
wins-server value 10.0.0.2 10.0.0.4
dns-server value 10.0.0.2 10.0.0.4
vpn-tunnel-protocol ikev1
split-tunnel-policy tunnelspecified
split-tunnel-network-list value Napoleons_splitTunnelAcl
default-domain value hnedu.com
username bpenza password LTg/b/c3kPWfC8KM encrypted privilege 0
username bpenza attributes
vpn-group-policy Napoleons
username baudette password nPZIRfshkE7WcaDQ encrypted
username baudette attributes
vpn-group-policy Napoleons
tunnel-group Napoleons type remote-access
tunnel-group Napoleons general-attributes
address-pool VPNUsers
default-group-policy Napoleons
tunnel-group Napoleons ipsec-attributes
ikev1 pre-shared-key Holyname12
tunnel-group Napoleon type remote-access
tunnel-group Napoleon general-attributes
address-pool VPNUsers
default-group-policy Napoleon
tunnel-group Napoleon ipsec-attributes
ikev1 pre-shared-key Holyname12
policy-map global-policy
class class-default
user-statistics accounting
service-policy global-policy global
prompt hostname context
call-home reporting anonymous
Cryptochecksum:eb9d34735b125eb61d8f7d93247ad9b7
: end

You need to discuss this issue with your network administrator. I suspect the network ports that allow VPN access to the system you want to use may be closed.
You also need to confirm that the VPN software you are using is compatible with the network you are trying to access. Where I work, the VPN software that comes with Mac OS X is not
compatible with the network so I have to use VPN software that was provided by my employer. You might be in the same situation.

Have a macbook pro running osx lion, connected a kindle fire using micro usb to transfer pictures and the disk icon won't show up on the desktop. When I ran disk utilities the kindle does show up there. Any thoughts as to why it's not recognizing?

Have a macbook pro running osx lion. Connected a Kindle Fire using micro usb and the disk icon doesn't show up on the desktop. Also sometimes get a message sayiing computer doesn't recognize device. When I opened disk utilities the Kindle disk does show up there. What am I missing?

cashworth wrote:
Kindle is connected directly, not thru a hub. Also called Amazon Kindle support, tech was baffled when I told her I was using a Mac. She said, "I'm not really familiar with apple products."
Precisely why it's not an iPad, and why it doesn't cost very much. An Apple rep would tell you how to connect an iPad to every computer.
Go here: http://www.amazon.com/gp/help/customer/display.html/ref=sv_kinh_9?ie=UTF8&nodeId =200127470

Macbook pro keeps saying connection timeout, and it used to connect to the internet fine. what's up, why can't it find and automatically connect to the internet anymore???

Macbook Pro keeps saying connection timeout and it used to connect to the internet fine. What's up, why can't it find and automatically connect to the internet anymore???

Like this: https://discussions.apple.com/thread/2775868?tstart=0 ?

Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule? It used to work with old Airport Extreme with updates thru Snow Leopard but now seems to only allow WEP encryption instead of WPA.

Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule? It used to work with old Airport Extreme network, run from a intel iMac with updates thru Mavericks but now seems to only allow WEP encryption instead of WPA and can't connect to Time Capsule. Airport Extreme Base was controllable from either computer up through Snow Leopard (I didn't do any of the Lion upgrades). Then when I upgraded to Mavericks I lost the ability to use Airport Utility with this hardware on the Sunflower but could still connect wirelessly to network without any problems. But now with the Time Capsule upgrade the Sunflower is blocked from network by a dialogue that requests ony WEP password, not WPA pwd used by Time Capsule. Neither can I use the old airport extreme base to extend the time capsule network since I can't input the correct password/encryption approach to join it. Is there a work around? Would a newer but old Airport Express be able to extend network to Sunflower? Or maybe a third party wireless (such as Netgear, Dlink, etc) that has browser type control rather than special utility?
Another question--before I used MAC addresses to control who could access network. Now on Time Capsule I don't see anything about this--so is it true now that the only access control is via WPA2 pwd now (which appears to be the encryption pwd and not the time capsule pwd)?

Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule?
I can’t claim to completely grasp the issue(s) you’re describing, but the underlying problem is presumably your iMac’s obsolete AirPort card. Whatever the case, an obvious (if not particularly helpful) answer to your stated question would be to connect your iMac with an ethernet cable, using powerline adapters as an alternative if you don’t want to have wire running all over the place.
My still fully functional clamshell iBook, with an original AirPort card, connects wirelessly to my 4th Generation TC network by means of a cheap 802.11b/g/n USB Wi-Fi adapter. This might be an option for you too.
Another question--before I used MAC addresses to control who could access network. Now on Time Capsule I don't see anything about this
When you edit your TC's settings the access controls appear under the Network tab, don't they?

HT2188 i just upgraded my iphone 3gs to ios 6 not sure if it updated but now when i turn on my phone it says automatically that i need to connect it to itunes using the USB port but when i connect it it comes up as new hardware and cannot find a program/s

i just upgraded my iphone 3gs to ios 6 not sure if it updated but now when i turn on my phone it says automatically that i need to connect it to itunes using the USB port but when i connect it it comes up as new hardware and cannot find a program/software for my device even though i have the latest itunes on my computer. i have tried reinstalling itunes but it still cannot find my phone and now i cannot use my phone as it is stuck on the sync to itunes screen

Have you downloaded and installed the latest version of iTunes from here:
http://www.apple.com/itunes/download/

VPN to connect automatically on login (using OSX client) ? ? ? ?

Similar Messages

Maybe you are looking for