Vserver provider with arch support

Hi,
do you now a good and reliable vserver provider that supports Arch Linux?
Another solution might be a transformation from <any os> to arch linux
Most of them only support debian and suse...
thanks

I just found one that is simply awesome: http://linode.com
some advantages:
an awesome admin interface
latest archlinux image - what else?
ajax console to access the server even if ssh fails
more space/traffic/ram as on slicehost for the same price
Well just take a look on it. I love it.

Similar Messages

Please do me provide with software which can support flipping and sreaming page on 27" iMac touch screen display

Please do me provide with software which can support flipping and sreaming page on 27" iMac touch screen display

IakovM,
See below for a few links.
You should ask the people at Troll Touch if the have a software to create a user interface.
Usually, the maker will provide programmers with the programming codes and a interface guide line on how to program the different gestures.
I know that PQLabs as a SDK for their touch screens.
With the programming codes in hand, any good Flash or HTML 5 programmer can setup a web site that will take advantage of the touch screen.
One thing I can tell you is that with touch screens based web sites, when it comes to links or buttons to push,everything needs to be bigger than on a standard web site. People will be using their fingers to do the clicking.
A finger is a much bigger pointer than a mouse pointer!
So links or buttons that are too small or to close to screen edges will be hard to click.
You can look at these for possible solutions:
TUIO is an open framework that defines a common protocol and API for tangible multitouch surfaces.
http://www.tuio.org/
http://kivy.org/#home
http://www.touchuserinterface.com/2009/06/multi-touch-programming-for-python-and .html

How do I install a version of vim with Python support?

I'm trying to install a version of vim with Python support, but for some reason I can't seem to find anything useful when I search.
So far I've found posts that say arch doesn't have one built with Python support, and use this <broken link> AUR package. I've search AUR for "vim python" which turned up nothing. There *does* exist extra/gvim-python3, but when I install that, then vim (not gvim) still tells me "Error: Required vim compiled with +python"
This search:
https://duckduckgo.com/?t=lm&q=arch+lin … on+support
Provides:
https://bbs.archlinux.org/viewtopic.php … 1#p1070281 - Only a link to a bug report
https://bbs.archlinux.org/viewtopic.php … 0#p1144210 - Post with the 404'd AUR link
What I finally found was this Gist with directions on using the ABS:
https://gist.github.com/MicahElliott/3048622
Ultimately you'll have to change the particular tar.xz files you use in the pacman -U steps, but this should get you vim with Python enabled.

I have downloaded vim by cloning The Vim Mercurial repository.
hg clone https://vim.googlecode.com/hg/ ~/bin/vim_bin
Then i have a this script to install it in my own ~/bin/ dir.
#!/bin/bash
cd /home/myuser/bin/vim_bin/src
echo "---Configure----"
./configure --prefix=/usr --localstatedir=/var/lib/vim \
--with-features=big --with-compiledby="Custom Vim insall" \
--enable-gpm --enable-acl --with-x=no \
--disable-gui --enable-multibyte --enable-cscope \
--enable-netbeans --enable-perlinterp \
--enable-rubyinterp --enable-luainterp \
--enable-pythoninterp --with-python-config-dir=/usr/lib/python2.7/config \
--enable-python3interp --with-python3-config-dir=/usr/lib/python3.4/config > my_log
echo "=== Make ==="
make >> my_log
echo "==== Install ===="
make install >> my_log
Hope it helps some one

HP DV6000 randomly freezing with Arch Linux

Hello,
Just to clarify I am working with Arch Linux as a Web Developer, therefore I do have special needs such as having 20+ tabs open with vital information in different pages.
I can assure that after using Windows XP, Windows 7, xUbuntu, Linux Mint and Ubuntu I have never had such breaks or freezes in this machine.
The freezes are identifiable when the mouse seems to be very slow to move, the computer very slow to respond, the cursor of the icon does not change within the context where it is, I can't even open the menu bar to access the terminal (using Terminator).
After noticing these randomly freezes, I've started to keep the Terminator open with top command inserted. After seeing the values of percentage usage in CPU or RAM, the levels don't even go up more than 20%. However, I notice that the laptop suddenly starts heating a lot.
The solution is just to wait with some luck about 10 minutes. If it does not go on after that, I need to turn off the computer by pressing the button or unplugging the battery (yeah, the battery is dead too).
Some main packages I currently use are:
- Cinnamon
- Filezilla
- Netbeans PHP IDE 8.0
- Skype
- Geany
- 7-Zip FM
- Adobe Flash Player
- Chromium (my main browser)
- Firefox
- SSH
- Htop
- VLC Media Player
- Terminator
Any ideas of what could it be?
Thanks!
Last edited by SirPereira (2014-05-19 14:52:56)

Rexilion wrote:
It seems you do not have any swap. Correct?
Could you provide the output of dmesg after the occurance?
Yes, you are correct, I do not have any swap. Would I benefit from it? I guess I never used it.
After the occurance you mean, after the freeze? I will try to do it, but it is rare the case when the computer is able to not freeze at all.
Got it now:
The output of dmesg:
[ 0.443614] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.443838] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
[ 0.444061] pcieport 0000:00:1c.5: irq 45 for MSI/MSI-X
[ 0.444184] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.444187] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.444190] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.444210] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.444213] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.444217] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.444237] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.444239] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.444243] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.444266] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.444271] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.444290] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.444293] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[ 0.444295] pci 0000:06:00.1: Signaling PME through PCIe PME interrupt
[ 0.444297] pci 0000:06:00.2: Signaling PME through PCIe PME interrupt
[ 0.444298] pci 0000:06:00.3: Signaling PME through PCIe PME interrupt
[ 0.444300] pci 0000:06:00.4: Signaling PME through PCIe PME interrupt
[ 0.444305] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.444324] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 0.444329] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 0.444345] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.444364] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.444399] intel_idle: does not run on family 6 model 23
[ 0.444441] GHES: HEST is not enabled!
[ 0.444500] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.444971] Linux agpgart interface v0.103
[ 0.445012] rtc_cmos 00:03: RTC can wake from S4
[ 0.445141] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.445167] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.445178] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.445322] TCP: cubic registered
[ 0.445446] NET: Registered protocol family 10
[ 0.445656] NET: Registered protocol family 17
[ 0.445905] registered taskstats version 1
[ 0.446529] Magic number: 14:681:877
[ 0.446613] rtc_cmos 00:03: setting system clock to 2014-05-20 08:51:33 UTC (1400575893)
[ 0.446705] PM: Hibernation image not present or could not be loaded.
[ 0.447929] Freeing unused kernel memory: 1120K (ffffffff818d8000 - ffffffff819f0000)
[ 0.447931] Write protecting the kernel read-only data: 8192k
[ 0.450553] Freeing unused kernel memory: 904K (ffff88000151e000 - ffff880001600000)
[ 0.451721] Freeing unused kernel memory: 416K (ffff880001798000 - ffff880001800000)
[ 0.458667] random: systemd-tmpfile urandom read with 2 bits of entropy available
[ 0.460077] systemd-udevd[47]: starting version 212
[ 0.478236] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[ 0.489263] ACPI: bus type USB registered
[ 0.489293] usbcore: registered new interface driver usbfs
[ 0.489304] usbcore: registered new interface driver hub
[ 0.494274] sdhci: Secure Digital Host Controller Interface driver
[ 0.494278] sdhci: Copyright(c) Pierre Ossman
[ 0.494499] sdhci-pci 0000:06:00.1: SDHCI controller found [197b:2382] (rev 0)
[ 0.494708] mmc0: SDHCI controller on PCI [0000:06:00.1] using DMA
[ 0.494739] sdhci-pci 0000:06:00.2: SDHCI controller found [197b:2381] (rev 0)
[ 0.494796] sdhci-pci 0000:06:00.2: Refusing to bind to secondary interface.
[ 0.499195] usbcore: registered new device driver usb
[ 0.499671] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.499940] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.500201] ehci-pci: EHCI PCI platform driver
[ 0.500769] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.500777] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.500786] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.500808] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000080e0
[ 0.501200] hub 1-0:1.0: USB hub found
[ 0.501209] hub 1-0:1.0: 2 ports detected
[ 0.501580] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.501587] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 0.501593] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.501626] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000080c0
[ 0.503178] SCSI subsystem initialized
[ 0.503409] hub 2-0:1.0: USB hub found
[ 0.503419] hub 2-0:1.0: 2 ports detected
[ 0.503907] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.503914] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 3
[ 0.503929] ehci-pci 0000:00:1a.7: debug port 1
[ 0.507842] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 0.507859] ehci-pci 0000:00:1a.7: irq 19, io mem 0xdd005c00
[ 0.508093] libata version 3.00 loaded.
[ 0.508752] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.508793] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.513351] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.513563] hub 3-0:1.0: USB hub found
[ 0.513629] hub 3-0:1.0: 4 ports detected
[ 0.536813] hub 1-0:1.0: USB hub found
[ 0.536828] hub 1-0:1.0: 2 ports detected
[ 0.556530] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.560059] hub 2-0:1.0: USB hub found
[ 0.560067] hub 2-0:1.0: 2 ports detected
[ 0.560345] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.560352] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 0.560366] ehci-pci 0000:00:1d.7: debug port 1
[ 0.563401] firewire_ohci 0000:06:00.0: added OHCI v1.10 device as card 0, 4 IR + 0 IT contexts, quirks 0x10
[ 0.568179] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 0.568198] ehci-pci 0000:00:1d.7: irq 20, io mem 0xdd005800
[ 0.576683] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.576856] hub 4-0:1.0: USB hub found
[ 0.576865] hub 4-0:1.0: 8 ports detected
[ 0.577213] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.577220] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.577228] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.577249] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000080a0
[ 0.577420] hub 5-0:1.0: USB hub found
[ 0.577429] hub 5-0:1.0: 2 ports detected
[ 0.577678] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.577684] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.577691] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.577712] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00008080
[ 0.577877] hub 6-0:1.0: USB hub found
[ 0.577885] hub 6-0:1.0: 2 ports detected
[ 0.578124] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.578130] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.578136] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.578156] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00008060
[ 0.578323] hub 7-0:1.0: USB hub found
[ 0.578331] hub 7-0:1.0: 2 ports detected
[ 0.578566] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.578573] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 0.578579] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 0.578609] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00008040
[ 0.578778] hub 8-0:1.0: USB hub found
[ 0.578786] hub 8-0:1.0: 2 ports detected
[ 0.579138] ahci 0000:00:1f.2: version 3.0
[ 0.579314] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
[ 0.579386] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 0.579390] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc ems sxs
[ 0.597458] scsi0 : ahci
[ 0.597577] scsi1 : ahci
[ 0.597688] scsi2 : ahci
[ 0.597787] scsi3 : ahci
[ 0.597890] scsi4 : ahci
[ 0.597988] scsi5 : ahci
[ 0.598049] ata1: SATA max UDMA/133 abar m2048@0xdd005000 port 0xdd005100 irq 46
[ 0.598053] ata2: SATA max UDMA/133 abar m2048@0xdd005000 port 0xdd005180 irq 46
[ 0.598054] ata3: DUMMY
[ 0.598056] ata4: DUMMY
[ 0.598058] ata5: SATA max UDMA/133 abar m2048@0xdd005000 port 0xdd005300 irq 46
[ 0.598060] ata6: SATA max UDMA/133 abar m2048@0xdd005000 port 0xdd005380 irq 46
[ 0.916700] ata6: SATA link down (SStatus 0 SControl 300)
[ 0.916718] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.063421] firewire_core 0000:06:00.0: created device fw0: GUID 0000000000000000, S400
[ 1.083353] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.083369] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.083987] ata1.00: ATA-8: TOSHIBA MK5055GSX, FG002C, max UDMA/100
[ 1.083990] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.084680] ata1.00: configured for UDMA/100
[ 1.084792] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK5055GS FG00 PQ: 0 ANSI: 5
[ 1.087088] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50L, SC04, max UDMA/100
[ 1.092125] ata2.00: configured for UDMA/100
[ 1.113361] usb 2-2: new low-speed USB device number 2 using uhci_hcd
[ 1.203938] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T50L SC04 PQ: 0 ANSI: 5
[ 1.208648] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.208739] sd 0:0:0:0: [sda] Write Protect is off
[ 1.208743] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.208779] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.290173] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.323084] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.323088] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.323226] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.325332] usbcore: registered new interface driver usbhid
[ 1.325335] usbhid: USB HID core driver
[ 1.325918] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2:1.0/0003:045E:0750.0001/input/input2
[ 1.326088] hid-generic 0003:045E:0750.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:1a.1-2/input0
[ 1.336169] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2:1.1/0003:045E:0750.0002/input/input3
[ 1.336217] hid-generic 0003:045E:0750.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:1a.1-2/input1
[ 1.418377] sda: sda1 sda2
[ 1.418731] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.426688] tsc: Refined TSC clocksource calibration: 2394.269 MHz
[ 1.446699] usb 4-4: new high-speed USB device number 3 using ehci-pci
[ 2.115101] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.200031] usb 5-1: new low-speed USB device number 2 using uhci_hcd
[ 2.385422] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/0003:046D:C05A.0003/input/input4
[ 2.385472] hid-generic 0003:046D:C05A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1/input0
[ 2.426729] Switched to clocksource tsc
[ 2.490018] usb 7-2: new full-speed USB device number 2 using uhci_hcd
[ 2.502963] random: nonblocking pool is initialized
[ 2.721320] systemd[1]: systemd 212 running in system mode. (+PAM -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
[ 2.721454] systemd[1]: Detected architecture 'x86-64'.
[ 2.739429] systemd[1]: Set hostname to <arch>.
[ 3.632105] systemd[1]: Configuration file /etc/systemd/system/netctl@my\x2dnetwork.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
[ 3.755410] systemd[1]: Starting Login Prompts.
[ 3.755928] systemd[1]: Reached target Login Prompts.
[ 3.755939] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.755992] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.756002] systemd[1]: Starting Remote File Systems.
[ 3.756478] systemd[1]: Reached target Remote File Systems.
[ 3.756488] systemd[1]: Expecting device sys-subsystem-net-devices-wlan0.device...
[ 3.756839] systemd[1]: Starting Encrypted Volumes.
[ 3.757313] systemd[1]: Reached target Encrypted Volumes.
[ 3.757330] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.757364] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.757373] systemd[1]: Starting Paths.
[ 3.757845] systemd[1]: Reached target Paths.
[ 3.757866] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 3.758419] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.758432] systemd[1]: Starting Swap.
[ 3.758902] systemd[1]: Reached target Swap.
[ 3.758913] systemd[1]: Expecting device dev-disk-by\x2duuid-3e31eb5f\x2d326a\x2d4cd0\x2daab3\x2d7d1e7ac0797b.device...
[ 3.759249] systemd[1]: Starting Root Slice.
[ 3.766515] systemd[1]: Created slice Root Slice.
[ 3.766527] systemd[1]: Starting User and Session Slice.
[ 3.767173] systemd[1]: Created slice User and Session Slice.
[ 3.767184] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.767681] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.767691] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.768180] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.768189] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.768677] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.768687] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.769176] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.769189] systemd[1]: Starting udev Control Socket.
[ 3.769676] systemd[1]: Listening on udev Control Socket.
[ 3.769688] systemd[1]: Starting udev Kernel Socket.
[ 3.770181] systemd[1]: Listening on udev Kernel Socket.
[ 3.770192] systemd[1]: Starting Journal Socket.
[ 3.770700] systemd[1]: Listening on Journal Socket.
[ 3.770716] systemd[1]: Starting System Slice.
[ 3.771341] systemd[1]: Created slice System Slice.
[ 3.771357] systemd[1]: Started File System Check on Root Device.
[ 3.771365] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 3.772001] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.772011] systemd[1]: Mounting Temporary Directory...
[ 3.790231] systemd[1]: Starting system-netctl.slice.
[ 3.790914] systemd[1]: Created slice system-netctl.slice.
[ 3.790930] systemd[1]: Starting system-getty.slice.
[ 3.791567] systemd[1]: Created slice system-getty.slice.
[ 3.809849] systemd[1]: Started Set Up Additional Binary Formats.
[ 3.852492] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 3.876658] systemd[1]: Starting Apply Kernel Variables...
[ 3.877416] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.878150] systemd[1]: Mounting Huge Pages File System...
[ 3.878884] systemd[1]: Starting udev Coldplug all Devices...
[ 3.879636] systemd[1]: Starting Setup Virtual Console...
[ 3.880782] systemd[1]: Started Load Kernel Modules.
[ 3.880820] systemd[1]: Mounting Configuration File System...
[ 3.881579] systemd[1]: Mounting Debug File System...
[ 3.882319] systemd[1]: Mounted FUSE Control File System.
[ 3.882346] systemd[1]: Starting Journal Service...
[ 3.883635] systemd[1]: Started Journal Service.
[ 4.312288] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[ 4.431925] systemd-udevd[146]: starting version 212
[ 5.513427] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[ 5.513433] ACPI: Power Button [PWRB]
[ 5.513493] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
[ 5.513777] ACPI: Lid Switch [LID0]
[ 5.513831] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7
[ 5.513834] ACPI: Sleep Button [SLPB]
[ 5.513911] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[ 5.513914] ACPI: Power Button [PWRF]
[ 5.596907] ACPI: AC Adapter [ACAD] (on-line)
[ 5.645033] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 5.657955] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 5.661096] acpi device:08: registered as cooling_device0
[ 5.663657] acpi device:0a: registered as cooling_device1
[ 5.663725] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input9
[ 5.708497] hp_accel: laptop model unknown, using default axes configuration
[ 5.720053] lis3lv02d: 8 bits sensor found
[ 5.729279] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.791571] ene_ir: chip is 0x3926 - kbver = 0x00, rev = 0xc0
[ 5.791574] ene_ir: PLL freq = 1406
[ 5.791575] ene_ir: KB3926C detected
[ 5.791586] ene_ir: Firmware regs: 00 00
[ 5.791587] ene_ir: Hardware features:
[ 5.791589] ene_ir: * Uses GPIO 40 for IR demodulated input
[ 5.821208] Monitor-Mwait will be used to enter C-1 state
[ 5.821217] Monitor-Mwait will be used to enter C-2 state
[ 5.821221] Monitor-Mwait will be used to enter C-3 state
[ 5.821225] tsc: Marking TSC unstable due to TSC halts in idle
[ 5.821242] ACPI: acpi_idle registered with cpuidle
[ 5.821270] Switched to clocksource hpet
[ 5.827916] Registered IR keymap rc-rc6-mce
[ 5.828003] input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input10
[ 5.828066] rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0
[ 5.840895] ene_ir: driver has been successfully loaded
[ 5.848018] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[ 5.877265] IR JVC protocol handler initialized
[ 5.878491] IR NEC protocol handler initialized
[ 5.879175] IR RC6 protocol handler initialized
[ 5.880281] IR RC5(x) protocol handler initialized
[ 5.880739] IR SANYO protocol handler initialized
[ 5.881059] input: MCE IR Keyboard/Mouse (ene_ir) as /devices/virtual/input/input12
[ 5.881065] IR MCE Keyboard/mouse protocol handler initialized
[ 5.881065] IR Sony protocol handler initialized
[ 5.881758] lirc_dev: IR Remote Control driver registered, major 249
[ 5.882267] rc rc0: lirc_dev: driver ir-lirc-codec (ene_ir) registered at minor = 0
[ 5.882270] IR LIRC bridge handler initialized
[ 5.891466] [Firmware Bug]: Invalid critical threshold (0)
[ 5.892123] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.892126] ACPI: Thermal Zone [TZ01] (31 C)
[ 5.903447] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input13
[ 5.903835] wmi: Mapper loaded
[ 5.927466] ACPI: Battery Slot [BAT0] (battery present)
[ 6.029419] [drm] Initialized drm 1.1.0 20060810
[ 6.114983] cfg80211: Calling CRDA to update world regulatory domain
[ 6.137776] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMBA) (20131218/utaddress-258)
[ 6.137785] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.137789] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000050f (\GPIO) (20131218/utaddress-258)
[ 6.137793] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.137822] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 6.180252] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 6.180255] Copyright(c) 2003- 2014 Intel Corporation
[ 6.180475] iwlwifi 0000:02:00.0: irq 48 for MSI/MSI-X
[ 6.287693] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 6.287960] r8169 0000:03:00.0: irq 49 for MSI/MSI-X
[ 6.288149] r8169 0000:03:00.0 eth0: RTL8168c/8111c at 0xffffc9000584a000, 00:00:00:00:00:00, XID 1c4000c0 IRQ 49
[ 6.288152] r8169 0000:03:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 6.345229] mousedev: PS/2 mouse device common for all mice
[ 6.436120] ACPI Warning: SystemIO range 0x0000000000008000-0x000000000000801f conflicts with OpRegion 0x0000000000008000-0x000000000000800f (\_SB_.PCI0.SBUS.SMBI) (20131218/utaddress-258)
[ 6.436128] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.526671] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c
[ 6.535077] media: Linux media interface: v0.10
[ 6.569608] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c
[ 6.569745] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 6.570548] input: HDA Intel HDMI/DP,pcm=3 Phantom as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 6.570639] input: HDA Intel Front Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 6.570714] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 6.581760] input: PC Speaker as /devices/platform/pcspkr/input/input18
[ 6.599116] iwlwifi 0000:02:00.0: loaded firmware version 8.83.5.1 build 33692 op_mode iwldvm
[ 6.683172] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 6.683177] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 6.683179] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 6.683182] iwlwifi 0000:02:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
[ 6.683232] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[ 6.701985] Linux video capture interface: v2.00
[ 6.780556] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 6.922833] nvidia: module license 'NVIDIA' taints kernel.
[ 6.922839] Disabling lock debugging due to kernel taint
[ 6.939605] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 6.939882] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
[ 6.939892] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 337.12 Fri Apr 4 14:51:15 PDT 2014
[ 6.991292] iTCO_vendor_support: vendor-support=0
[ 6.991687] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 6.991726] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[ 6.991831] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.064547] input: HP WMI hotkeys as /devices/virtual/input/input19
[ 7.066862] systemd-udevd[153]: renamed network interface eth0 to enp3s0
[ 7.089277] Bluetooth: Core ver 2.18
[ 7.089304] NET: Registered protocol family 31
[ 7.089306] Bluetooth: HCI device and connection manager initialized
[ 7.089316] Bluetooth: HCI socket layer initialized
[ 7.089319] Bluetooth: L2CAP socket layer initialized
[ 7.089331] Bluetooth: SCO socket layer initialized
[ 7.097641] gpio_ich: GPIO from 195 to 255 on gpio_ich
[ 7.119889] uvcvideo: Found UVC 1.00 device HP Webcam (05c8:010f)
[ 7.125560] usbcore: registered new interface driver btusb
[ 7.136432] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0/input/input20
[ 7.136523] usbcore: registered new interface driver uvcvideo
[ 7.136525] USB Video Class driver (1.1.1)
[ 7.162108] kvm: disabled by bios
[ 7.167498] systemd-udevd[149]: renamed network interface wlan0 to wlp2s0
[ 7.515656] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000/0x0, board id: 3655, fw id: 428212
[ 7.594362] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input14
[ 7.949749] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: data=ordered
[ 8.055002] systemd-journald[127]: Received request to flush runtime journal from PID 1
[ 13.835532] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[ 13.838466] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 13.935096] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[ 13.938046] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 13.964225] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 14.845976] nvidia 0000:01:00.0: irq 50 for MSI/MSI-X
[ 20.903153] wlp2s0: authenticate with b8:c7:5d:02:3b:9d
[ 20.906517] wlp2s0: send auth to b8:c7:5d:02:3b:9d (try 1/3)
[ 20.909113] wlp2s0: authenticated
[ 20.910074] wlp2s0: associate with b8:c7:5d:02:3b:9d (try 1/3)
[ 20.913437] wlp2s0: RX AssocResp from b8:c7:5d:02:3b:9d (capab=0x1431 status=0 aid=7)
[ 20.918955] wlp2s0: associated
[ 20.919008] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 21.089546] wlp2s0: deauthenticating from b8:c7:5d:02:3b:9d by local choice (reason=2)
[ 21.096263] wlp2s0: authenticate with b8:c7:5d:02:3b:9d
[ 21.099042] wlp2s0: send auth to b8:c7:5d:02:3b:9d (try 1/3)
[ 21.099780] cfg80211: Calling CRDA for country: AT
[ 21.101974] wlp2s0: authenticated
[ 21.103555] wlp2s0: associate with b8:c7:5d:02:3b:9d (try 1/3)
[ 21.108457] wlp2s0: RX AssocResp from b8:c7:5d:02:3b:9d (capab=0x1431 status=0 aid=7)
[ 21.115231] wlp2s0: associated
[ 26.591580] fuse init (API version 7.22)
[ 148.105211] wlp2s0: authenticate with b8:c7:5d:02:3b:9e
[ 148.107797] wlp2s0: direct probe to b8:c7:5d:02:3b:9e (try 1/3)
[ 148.108518] cfg80211: Calling CRDA to update world regulatory domain
[ 148.310034] wlp2s0: direct probe to b8:c7:5d:02:3b:9e (try 2/3)
[ 148.513366] wlp2s0: send auth to b8:c7:5d:02:3b:9e (try 3/3)
[ 148.514272] wlp2s0: authenticated
[ 148.516865] wlp2s0: associate with b8:c7:5d:02:3b:9e (try 1/3)
[ 148.517652] wlp2s0: RX AssocResp from b8:c7:5d:02:3b:9e (capab=0x1511 status=0 aid=4)
[ 148.519034] wlp2s0: associated
[ 148.531940] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by b8:c7:5d:02:3b:9e
[ 231.077026] wlp2s0: authenticate with b8:c7:5d:02:3b:9d
[ 231.080206] wlp2s0: send auth to b8:c7:5d:02:3b:9d (try 1/3)
[ 231.081422] cfg80211: Calling CRDA to update world regulatory domain
[ 231.082756] wlp2s0: authenticated
[ 231.083955] wlp2s0: waiting for beacon from b8:c7:5d:02:3b:9d
[ 231.362261] wlp2s0: authenticate with b8:c7:5d:02:3b:9e
[ 231.365917] wlp2s0: send auth to b8:c7:5d:02:3b:9e (try 1/3)
[ 231.380479] wlp2s0: authenticated
[ 231.383400] wlp2s0: associate with b8:c7:5d:02:3b:9e (try 1/3)
[ 231.386425] wlp2s0: RX AssocResp from b8:c7:5d:02:3b:9e (capab=0x1511 status=0 aid=4)
[ 231.390072] wlp2s0: associated
[ 231.481241] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by b8:c7:5d:02:3b:9e
[ 311.833862] perf samples too long (2511 > 2500), lowering kernel.perf_event_max_sample_rate to 50100
[ 3074.285425] Watchdog[977]: segfault at 0 ip 00007f42693ed9b8 sp 00007f4251f777d0 error 6 in chromium[7f4265a4e000+55d7000]
[ 3166.859073] chromium[1212]: segfault at 39 ip 00007f7ddd6a7280 sp 00007fff9d984088 error 6 in chromium[7f7ddcefc000+55d7000]
[ 3172.385333] chromium[1169]: segfault at fbadbeef ip 00007f7ddf63345d sp 00007fff9d983f20 error 6 in chromium[7f7ddcefc000+55d7000]

Arch support for KDE vs Chakra

Back in the days there was a thing called "KDEmod" for Arch Linux which was bringing better (?) support for KDE technologies. Then it transformed into Chakra Linux. I didn't know about that then as I was using Gnome... last years I'm using almost exclusively KDE and I don't feel like it's not supported enough. The old Wiki, where the differences between KDEmod and Arch's KDE were described, is dead. How was it better then and how would it be better now? What was the idea behind it? I don't feel like playing with Chakra as I'm good where I am but for the sake of curiosity - what's disputable about KDE support in Arch?

The main difference between KDE and KDEmod was there with KDE3 based on Qt3. KDEmod provided split packages and a very nice looking default theme and some patches. Archlinux couldn't (or wouldn't) provide such packages because of the philosophy to leave packages / sources as upstream as possible. And KDEmod's split packages were provided before pacman supported split packages, so it was kinda hacky.
When KDE4 was released, KDEmod was still there, but the differences were VERY small. And now that pacman supports split packages and KDE is provided by the Arch devs as split packages, there's no real need for something like KDEmod anymore.
Yes I've already been using Archlinux back then although I wasn't subscribed to neither this nor the german forum.
Last edited by sekret (2014-04-14 16:12:50)

Vanilla kernel with suspend2 support

Hey people,
I have started using the beyond kernel a while ago, because I wanted a precompiled arch kernel with suspend2 support. I used self-compiled vanilla+suspend2 kernels for a while before that, and they were very stable. With beyond, I first got strange bugs, hard to reproduce, suspending or resuming sometimes failed, and the newest version doesn't work at all.
Just for some testing, I compiled a kernel with the same config and patches as kernel26 AND suspend2 patches included. It seems to work great, much stabler than beyond when suspending.
What I am asking is, how many people would be interested if such a kernel would be maintained in community and what kernel modules they would need (I am planning to do rt2500, rt2x00, nvidia and maybe ATI, more if requested).
Please only submit your vote to the poll if you are either a suspend2 user or interested in using suspend2

brain0 wrote:
dtw wrote:I think this is a waste of time and energy propogated by a lack of patience. Do you really want to go to all this trouble, maintain what is in essence a very small but new kernel patchset and all the relevant modules _just_ because suspend2 is a broken in -beyond at the moment? My Dog, I wish I had such time to spend.
Can you give me your definition of "at the moment" please? Or better, name a beyond release where suspend2 was stable. I switched to beyond with 2.6.16 and since then it was always unusable for me. With a vanilla kernel, suspend2 hasn't failed for me in a year or so. With beyond, it failed every time I really needed it.
Admittedly suspend2 may be _generally_ unstable with other patchsets but even still, it'll only take one bulletproof release to invalidate all you are suggesting.
I won't spend the rest of my life waiting for the beyond release that will work. I'd rather do something about it and provide a kernel that is stable and has that very important feature. (And as tpowa wasn't willing to include suspend2 in kernel26 when I asked him, this is the best shot).
Awesome - I dont think I could have said it in better words - however I did try above >
I have tried many patchsets that had suspend2=swap patches but the never worked or not as well as a vanilla kernel with just suspend2-swap patch.
Lets do it.

Issues with Arch, xorg and Asus eee 4G 701

Hello, this is my first post here
I installed Arch 2009.02 on my Asus eee 701(4G), the installation went well and the system was up and running within minutes. I configured the wireless card (Atheros) which arch supported out-of-the-box and updated the system with pacman -Syu. Then, I installed the intel driver for the vga of the eee and attempted to configure X.
The issues started at this point. "Xorg -configure" appeared to work, but when I did "X -config /root/xorg.conf.new" all I could see was the mouse cursor as an X and nothing more. The touchpad didn't respond and nothing worked.
Then, I tried using "xorgcfg" but even though the screen worked great (I could see the stuff displayed), the system couldn't receive any input from the touchpad and thus the result was just a little bit better than with "Xorg -configure". I tried to reboot and use a USB mouse to see if the cursor responded but to no avail...
As a last resort, I decided to use the xorg.conf found on the eee page of the archwiki. I downloaded it in my PC, saved it and used wget to move it from my ftp server to the eee. I moved it to /etc/X11/ as xorg.conf and attempted to run "X -config /etc/X11/xorg.conf" to see if it worked. Unfortunately, no result. xorg attempted to start and then quit with the error "Fatal server error: no screens found".
That's pretty much it... I have no idea what to do next or why the xorg.conf found in the Arch wiki doesn't work... Any suggestions would be really appreciated...
Last edited by DreamAxe (2009-02-19 08:23:39)

I did what you suggested above, but it still fails. Then I studied the log and I found this:
Parse error on line 10 of section files in file /etc/X11/xorg.conf
"RgbPath" is not a valid keyboard in this section
Any suggestions on how to solve this?
EDIT: OK, the discussion page on the Archwiki helped. All I had to do was remove the 'RgbPath "/usr/share/X11/rgb"' line and xorg worked flawlessly
Last edited by DreamAxe (2009-02-20 05:03:26)

Today I bought app call starsports app and now I can open app and email to starsports they say not for Canada I ask my refund but they ask me to go with iTunes support team...please can you refund my money back in my account

Today I bought app call starsports app and now I can open app and email to starsports they say not for Canada I ask my refund but they ask me to go with iTunes support team...please can you refund my money back in my account..

Welcome to the user to User Technical Support Forum provided by Apple.
For your issue.. Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

We're sorry. It seems there is a problem. Please try using Gmail with a supported browser. If you're encountering this error while using a supported browser, we

after the last udpate I can no longer access gmail or youtube. the error message from gmail is: We're sorry. It seems there is a problem. Please try using Gmail with a supported browser. If you're encountering this error while using a supported browser, we suggest alerting your Internet Service Provider (ISP) that a proxy is failing to accept cookies on HTTP redirects.
youtube just lists some generic issue regarding cookies, and my cookie settings are wide open. I can open both with safari so it is a firefox issue.

Did you install any new add-ons lately? I see listed:
AddThis 3.5.9 ({3e0e7d2a-070f-4a47-b019-91fe5385ba79}) 
Advertising Cookie Opt-out 1.5 ([email protected]) 
Flash Video Downloader 5.3.2 ([email protected]) 
Garmin Communicator 4.1.0 ({195A3098-0BD5-4e90-AE22-BA1C540AFD1E}) 
socialvest 0.5.5 ([email protected]) 
Troubleshooter 1.1a ([email protected]) 
eMusic Community Toolbar 3.21.0.1 ({9ee802e8-c931-47ab-b570-aa8f791598ca}) (Inactive)
Are any of these new?

Disapointed with itunes support hope someone has a answer

I should first say that the purpose in this post is not to slam itunes support but to find someone with a helpful answer.
About two weeks ago my computer started telling me that 100 of my songs could not sync because they were not authorized with this computer. I click to authorize, it tells me this computer is authorized. I went to the Apple support page and discussion boards and I have tried every option. When nothing worked I sent a message to itunes support stating everything above.
Below is the frustrating correspondence I'm now having with itunes support.
ME:I can't authorize my system to play purchases my system keeps requesting that I authorize, then tells me I am authorized. I have done all the trouble shooting options found on the apple support page and spoken to a iphone support person and they said the problem is with itunes. Please help.
ITUNES:Dear N
Thank you for contacting iTunes Store Customer Support. My name is Pradeep. I am glad to assist you for the day.
I apologize for the delay in response from us. The delay is happening due to unexpected high volume of request. I know it must have been difficult for you to wait for a response from us and I deeply regret that.
N, please accept my sincere apologies for all the frustration caused you.
I am sorry to hear that you are repeatedly asked to authorize your computer. I know how disappointing that must be.
N, the information in this article should help you resolve this:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
If you are still asked to authorize your computer after following the instructions in the article above, please let me know and I will assist you further.
Thank you for understanding and patience. You are a valued member of the Apple family. Your experience with the iTunes Store is of utmost importance to us. Thank you for being an iTunes Store customer.
Have a nice day !!!
Sincerely,
Pradeep
iTunes Store Customer Support
ME:As I said in my original email, I have tried all of this, it is still not working.
(in the email below he was wrong I don't have two accounts, my husband and I have two diffrent accounts and home sharing)
Itunes:Thank you for contacting iTunes Store Support. I am Pradeep again. I glad to assist you for the day.
N, please accept my sincere apologies for all the frustration caused you.
I'm sorry to hear you're having trouble authorizing your computers to play your purchases.
I did a little investigating and found that you have multiple iTunes accounts:
Please note that it is not possible to merge two or more accounts, and your computers need to be authorized for all of your accounts or some of your purchases may not play.
To authorize your computers, follow these steps on each computer for each account:
1) Make sure you have installed the latest version of iTunes. You can download the latest version free of charge:
http://www.apple.com/itunes/download
2) Open iTunes.
3) From the Store pull-down menu at the top, choose Authorize Computer.
4) Enter one of your account names and the password for the account.
Note: You must select the AOL button for your AOL accounts and the Apple button for your Apple ID accounts in order for authorization to be successful.
5) Click Authorize. A dialog will tell you if the authorization was successful or unsuccessful and how many computers you have authorized for that account.
Repeat steps 3 to 5 for each account listed above.
If you forgot the password to one of your Apple ID accounts, you can recover it using the Apple password-recovery website:
http://iforgot.apple.com
If you can't remember your AOL password, call AOL at 1-800-827-6364 or click the link below to be taken to the area of AOL's website where you can reset the password yourself:
https://account.login.aol.com/opr/_cqr/opr/opr.psp
To figure out which account you used to purchase a particular item, follow these steps:
1) Control-click (or right-click) the item in your iTunes Library.
2) Choose Get Info from the menu that appears.
3) Click the Summary tab.
Note the account name that appears in the list. The account name that appears is what it was when you purchased the item. Even if you have changed your account name since then, the item's Summary will continue to display the original account name.
You can also review your entire purchase histories. This article shows you how:
http://support.apple.com/kb/HT2727
Thank you for understanding. I really appreciate your patience N. You are a valued member of the Apple family. Your experience with the iTunes Store is of utmost importance to us. Thank you for being an iTunes Store customer.
Have a nice day !!!
well again he sent me to the website I already told him I have been to, and I also said the whole problem is that the prompt tells me to authorize when it is authorized, WHY did he think he needed to tell me how to authorize my computer?
ME: Once again, the computer IS authorized! The music that will not play is a random 100 songs out of over 1000 that had been purchased on MY account. You have not provided me any information that I have not already read and tried from the apple support web page.
Once again if you had read the first email you would know this. I must now request a supervisor to contact me preferably by phone at xxx-xxx-xxxx. If it must be by email please be sure that my problem is thoroughly investigated before contacting me, as I am tired of repeating myself.
Well; once again he tells me to try options that I have done, and stated in my first email.
Itunes:Dear N,
Thank you for contacting iTunes Store Support. I am Pradeep again. I glad to assist you for the day.
N, please accept my sincere apologies for all the frustration caused you.
As an Advisor for the iTunes Store, I handle issues related to billing, downloading, customer accounts, and the items available on the iTunes Store. Although your question falls outside of my area of specialty, I will be happy to assist you with resolving your issue.
Listed below are some helpful tips and links. Once you have found a category that relates to your issue, follow the instructions or click on the associated link to go to that page.
A wide variety of helpful tutorials, troubleshooting steps, and support information can be found on the iTunes support website:
http://www.apple.com/support/itunes/ww
For answers to general questions about iTunes, open iTunes and choose "iTunes Help" from the Help menu.
To post questions and read answers provided by other iTunes users, you can participate in iTunes discussions at our Discussions forum:
http://discussions.apple.com/category.jspa?categoryID=149
Technical assistance and service information for your iPod is available on the following page:
http://www.apple.com/support/ipod
If you require more assistance, you may wish to call our AppleCare technical support team. A technical Advisor will be able to tell you about Apple's complimentary and fee-based support options as well as assist you in determining what option might be most helpful in this case. To find the appropriate phone number, please visit:
http://www.apple.com/support/contact/phone_contacts.html
1-800-275-2273
Another option is to simply describe your issue using our website and arrange for an Apple Expert to call you. Using this option, you can receive a phone call now, or make an appointment to have an Apple Expert call you later if that is more convenient. To explore the Apple Expert option, please visit:
http://www.apple.com/support/expert
Thank you for understanding. I really appreciate your patience Nicole.
Have a nice day !!!
Sincerely,
Pradeep
iTunes Store Customer Support
At the point when he even says this is out of his league but he's not sending it to someone who can help, I think I may loose it. This is my last responce, yes it was a bit angry but not nearly as angry as I wanted to be. I have yet to hear back.
ME:How many times do I have to tell you? I Have Done That!!! I Have Spoken with apple support, the problem is something iTunes must fix! Why am I forced to continue to tell you the same thing over and over again?
It is painfully clear you lack the ability to help me. Please send this to someone who can.
This is so frustrating. And message boards all over show the same problem. 100 random purchases that will not play, and the trouble shooting options not working. I dont know what to do.
Oh and I have tried removing the 100 songs it just picks a new 100 songs not to sync.

That's a shame. http://support.apple.com/kb/ts1389 should cover most of the issues. The 100 random songs bit is simply that iTunes only bothers to list the first 100 problem songs. At that point, as far as iTunes is concerned, none of your songs are authorised. Again, I realise you've probably tried this already, but is your user account an admin account, or have you tried switching to an admin account to authorise the computer? Do the songs play in iTunes only then not to sync or will they not play either? It may be worth looking at the permissions on the C:\ProgramData\Apple Computer folder and making sure that Everyone & SYSTEM both have full access, then replacing the permissions on child objects, before attempting the SC.Info removal tip again.
I'm just shooting in the dark here however. If I recall the one time I had the problem personally the fix was to deathorise the PC, attempt to play a DRM'd track (i.e. don't use Store > Authorise computer first), authorise, job done. Hopefully there are others on these boards with more experience resolving this type of issue who can wade in with suggestions. I guess if it were me I'd also check I can at least get a different machine properly authorised to my account, i.e. put a DRM'd track on a USB stick and make sure I can play it on another machine. If you're at the 5 computer limit deauthorise all may also be worth a shot.
tt2

How to setup grub2 with arch linux and xen, lvm on luks

OK, so I tried downloading this package from AUR: https://aur.archlinux.org/packages/xen-git/ , but that has patching problems as noted in the comments. It looks like the packagebuild sets up all the xen stuff for you, but I can't seem to get the package to install because of the error's while patching. If anyone can point me in the right direction on what all the extra files in the PKGBUILD are for or how to debug problems with PKGBUILDs not working because of patches.
So next I just tried to compile the latest xen from git://xenbits.xen.org/xen.git (with ./configure, make, make install) and that seemed to go fine, but I'm a bit confused:
1. Do I have to do any additional configuration for xen when working with arch linux? On ubuntu I could just compile the source, update grub, and make sure to start the x services at runtime.
2. How do I set up grub to load xen with this setup? Right now this is my /boot/grub/grub.cfg:
GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="Arch"
GRUB_CMDLINE_LINUX_DEFAULT="quiet"
GRUB_CMDLINE_LINUX="cryptdevice=/dev/sda3:vgStorage"
# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos"
# Uncomment to enable Hidden Menu, and optionally hide the timeout count
#GRUB_HIDDEN_TIMEOUT=5
#GRUB_HIDDEN_TIMEOUT_QUIET=true
# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console
# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE=auto
# Uncomment to allow the kernel use the same resolution used by grub
GRUB_GFXPAYLOAD_LINUX=keep
# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=true
# Uncomment and set to the desired menu colors. Used by normal and wallpaper
# modes only. Entries specified as foreground/background.
#GRUB_COLOR_NORMAL="light-blue/black"
#GRUB_COLOR_HIGHLIGHT="light-cyan/blue"
# Uncomment one of them for the gfx desired, a image background or a gfxtheme
#GRUB_BACKGROUND="/path/to/wallpaper"
#GRUB_THEME="/path/to/gfxtheme"
# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"
#GRUB_SAVEDEFAULT="true"
~
I've tried throwing in a line like: XEN_HYPERVISOR_CMDLINE="cryptdevice=/dev/sda3:vgStorage", but nothing new shows up on the grub boot menu.
First time trying to set up a non-ubuntu system, please help!

As for XEN.... well you could always try QEMU/KVM or LXC.
As for the LVM2-on-LUKS/dm-crypt
My /etc/mkinitcpio.conf looks like this...
MODULES="aesni_intel ata_generic ata_piix nls_cp437 ext4 intel_agp i915 dm-snapshot"
BINARIES=""
FILES=""
HOOKS="base udev autodetect block keymap encrypt lvm2 filesystems keyboard fsck shutdown"
/etc/defaults/grub
GRUB_CMDLINE_LINUX="cryptdevice=/dev/sda2:root:allow-discards"
GRUB_PRELOAD_MODULES="part_gpt part_msdos"
GRUB_TERMINAL_INPUT=console
GRUB_GFXMODE=auto
GRUB_GFXPAYLOAD_LINUX=keep
GRUB_DISABLE_RECOVERY=true
The running grub config looks like this
/boot/grub/grub.cfg
9 insmod part_gpt
10 insmod part_msdos
53 if loadfont unicode ; then
54 set gfxmode=auto
55 load_video
56 insmod gfxterm
57 set locale_dir=$prefix/locale
58 set lang=en_US
59 insmod gettext
60 fi
61 terminal_input console
62 terminal_output gfxterm
63 set timeout=3
84 menuentry 'Backup, Arch Linux grsec kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-grsec kernel-true-12341234-8080-8080-8080-332200882255' {
85 load_video
86 set gfxpayload=keep
87 insmod gzio
88 insmod part_msdos
89 insmod ext2
90 set root='hd1,msdos2'
91 if [ x$feature_platform_search_hint = xy ]; then
92 search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 BBAAEEAA-FFCC-CCFF-FFCC-AABBCCEEBBAA
93 else
94 search --no-floppy --fs-uuid --set=root BBAAEEAA-FFCC-CCFF-FFCC-AABBCCEEBBAA
95 fi
96 echo 'Loading Linux grsec kernel ...'
97 linux /vmlinuz-linux-grsec root=/dev/mapper/VolGroup00-lvroot rw cryptdevice=/dev/sda2:root:allow-discards quiet
98 echo 'Loading initial ramdisk ...'
99 initrd /initramfs-linux-grsec.img
100 }
Things to note:
Numerical UUID is the UUID of the ROOT partition.
Alphabetical UUIS is the BOOT partition
hd1,msdos2 AND ahci1,msdos2 are how the Grub Bootloader numbers the drives not Linux.
I have my BOOT partition on a USB stick, and it is the Second partition.
So, that would make it, Device 2 and Partition 2
Device numbering starts at 0
Partition numbering starts at 1
Oh, and note that you don't need ":allow-discards" ... at all but certainly if you don't have an SSD. Also note that I included the line numbers so it is very clear that I didn't post the whole thing, but instead what I thought was relevant. Finally, I am loading modules that I don't even need, but what the hell... if it ain't broke, don't fix it
Last edited by hunterthomson (2013-12-04 08:31:45)

Trying this again as I'm getting no where with Adobe Support!!!

This should have been really simple. I have submitted this questions three times now as well as two separate support tickets, plus a call to Adobe support direct and basically no help at all!!!
I need to rename our premier partner site post a merger which resulted in a company name change. I have updated the Adobe ID with mixed results (some parts of the service reference the old name (e.g., Kuler) and certain support services now say that the email address is not associated with that service (really helpful when you need to actually get support).
I contacted Adobe support by phone only to be told that I needed to raise a ticket - not a problem more than happy to follow proper process! So I did that then I got a response which did not address the issue at all and basically said that if it was "TOTALLY NECESSARY" (well it's a business people we only bother with the "totally necesary" and you would think that trading under a different name with the partner site - which is meant to be used for marketing purposes (isn't that what you pay your $2000 for ??? - would be kinda necessary!!!! I mean really?).
Ok so moving, on I was informed that the case would be escalated to Level 2 technical support. Then I heared absolutely nothing for five days except an auto generated email saying the case was about to be closed as the period to provide more information had lapsed. Well I had added more information to the email several times so clearly the case was never escalated and the support staff have just put it in the to delete pile (confirmed by the fact that the case no longer appears in the active case list or the closed case list - I have the emails and the case number - so what happened to the original case??? .
So What happened Adobe / Business Catalyst - your support used to be world class. Now you're right up there with Lenovo after sales service (non existant)!
So being the persistent chap I am (plus this must be resolved otherwise the new CEO is going to go balistic) I will provide the information again in the hope that someone from support will do the right thing and address my technical problems (not to mention the serious issues with Adobe support services):
Old site URL: veridicalconsulting.businesscatalyst.com
Old user email: (this is the origina ladmin user id that was used to request the move): [email protected]
The new Partner Name: (this is the new Partner Portal name we want our partner site moved to): DMS.Group or DMS Group or DMS-Group depending on any naming convention restrictions.
The new Partner URL: (the Partner's website address should be changed to): dms-group.businesscatalyst.com
The new Partner user email: [email protected] (since changing this email does not access the support website - error 4)
Permission to rename domain: Yes I formally request to have my partner site renamed per the details above
Previous Ticket number (which seems to have been ignored) 81737 and 82912 as I keep getting 5 day lapse notices even though I was informed that it would be escalated to level 2 technical support.
Could someone please do something about this as it's getting serious and we don't want the CEO getting involved (former barrister) and I don;t need the headache over what should be a relatively simple...ok this is what we are going to do....

Hi Peter
Renaming for the websites in your partner portal are fine. You just need to consider repathing as you've mentioned. You can do a find and replace to sort that..
Remnaing for the Partner address I believe is a little more involved. It probably invoved Adobe Engineering. I think only Adobe could tell you how it affects the setup. I believe you can't just rename the partner portal slug. Other things rely on it.
But I can suggest that this isn't really in the scope of what Adobe are obligated to support. A partner program is purchased, they don't claim that it's customisable. But since you're a partner, Im sure if you're nice about it, log a ticket and ask Support to escatlate it to ACCOUNTS, then Accounts will be able to help. If you just ask support they will give you a dumb response and close the ticket. So ask to have it escalated.
It'll mean that they may need to get engineering involved. Which takes the engineers away from developing BC.
But I wouldn't allude to Barristers. It'll get you nowhere and this is your bag, not adobes.
Brett

Problem with apple support , help me plz !! don't remove my thread plzz

hello all first of all please accept my apologies for my bad english language .I'm an American who lived outside of America since childhood. i hope you understand me . i am one of the apple fans that many times i contact with apple support team for solving my itunes problems, some of supports were great But on other side there are many employee in the apple company that they just give us some PREPARED answers without thinking about what i ask them !
i want to report my problem here to get rid of those useless persons and ofcourse those weak answers in the apple company. before of explaining my problem , let me tell you a short thread:
some months ago i bought one microsoft XBOX live CODE to charge my LIVE account , i bought that from a retail store at France. Code was redeemed before i buy that , that was obvious that seller had decide to scam me with a used voucher ! and he did not accept my words and he just needed proof. so i go to microsoft.com on support section then i start talking with online chat support
please help me to solve my problem , please tell me that how i can report some one on apple?
<Edited By Host>

hi bleach i explain whole the story in the post 1 but the forum moderator removed that and this time he EDIT my thread.
i bought 3 iTunes code and i want to know the date and time of redeeming, this issue happened to me manytimes in the past and each time apple support answered me with the time of redeeming of the code.
but some times some persons in apple support they don't help me and they don't give me date and time of redeeming ! and they just give me some prepaid and Irrelevant answers.
all i want to say is that many persons in apple are useless really, and we have report their weak support.
yes you are right we are all users but what we have to do when a bad person support us on the apple ?
yourself just send me a link for this matter :www.apple.com/support/contact
what i have to do on that link ?
where i have put my complaint ??
hey peoples , many support persons in apple have no any Creativity to solve our porblems . what we have to do againts of them ??
many times apple support employees tell us "I do understand how important it must be for you to know the details, but I do apologize as I won't be able to provide any more details regarding your concern."
is it giving the date and time of redeeming so hard? Why he/she can't give me more details regarding my concern BUT others can do ??

Problems using NSS library as PKCS#11 provider with JAVA 6

Hi,
I�m trying to configure JAVA 6 on Solaris 10 SPARC to use Mozilla NSS library as PKCS#11 provider (to achieve FIPS-140 certification for my application). I�m following the guidelines from http://java.sun.com/javase/6/docs/technotes/guides/security/p11guide.html#NSS but unfortunately something doesn�t work for me as expected...
Let me describe the exact steps that I followed (because devil may be in the small details :-)
I downloaded NSS 3.11.4 and NSPR 4.6.4 binaries from mozilla.org (32 bit �debug� versions for Solaris 9, because these were the only �binary� versions for SPARC available on Mozilla site and as far as I understand these are the exact versions that passed FIPS-140 certification), unpacked them under the /opt directory and copied both of them into a single /opt/nss tree as follows:
mkdir /opt/nss
cp �r /opt/nss-3.11.4/* /opt/nss
cp �r /opt/nspr-4.6.4/* /opt/nss
I created a PKCS#11 configuration file /opt/nss/pkcs11.cfg as per JAVA 6 security guide:
name = NSScrypto
nssLibraryDirectory = /opt/nss/lib
nssDbMode = noDb
attributes = compatibility
(I know that this configuration is not for FIPS mode � but I thought that I�d better start with a simple NSS configuration)
Then I modified /usr/jdk/jdk1.6.0_03/jre/lib/security/java.security file and replaced 1st provider with:
security.provider.1=sun.security.pkcs11.SunPKCS11 /opt/nss/pkcs11.cfg
Now everything should be in place � so I created a small JAVA program and ran it:
import javax.crypto.SecretKeyFactory;
import javax.crypto.spec.DESedeKeySpec;
import javax.crypto.SecretKey;
import javax.crypto.Cipher;
import java.security.*;
public class Test
public static void main(String[] args)
try
SecretKeyFactory keyFactory = SecretKeyFactory.getInstance("DESede");
DESedeKeySpec keySpec = null;
keySpec = new DESedeKeySpec(new String("laKuf1Tcc6sOhsdPf49=m4es").getBytes());
System.out.println("keyFactory provider: " + keyFactory.getProvider().getName());
SecretKey key = keyFactory.generateSecret(keySpec);
Cipher decryptCipher = Cipher.getInstance("DESede");
decryptCipher.init(Cipher.DECRYPT_MODE, key);
System.out.println("decryptCipher provider: " + decryptCipher.getProvider().getName());
catch (Exception ex)
ex.printStackTrace();
Unfortunately it produced the following output:
EMS-Server42# java test
keyFactory provider: SunPKCS11-NSScrypto
decryptCipher provider: SunJCE
And when I comment out SunJCE provider in java.security file I get the following exception:
java.security.NoSuchAlgorithmException: Cannot find any provider supporting DESede
at javax.crypto.Cipher.getInstance(DashoA13*..)
at test.main(test.java:38)
So it looks like something is wrong with my NSS configuration. Because AFAIK DESede (3DES) is supported by the NSS library, but for some reason JAVA doesn�t see this algorithm implemented in NSS PKCS#11 provider.
Any suggestions on what am I doing wrong?
Best regards,
Alex

Works for me:
import java.security.Provider;
import java.security.SecureRandom;
import java.security.Security;
import javax.crypto.Cipher;
import javax.crypto.SecretKey;
import javax.crypto.SecretKeyFactory;
import javax.crypto.spec.DESedeKeySpec;
import javax.crypto.spec.IvParameterSpec;
public class Test
public static void main(String[] args)
    try
      String configFileName = "/nss/nss.cfg";
      Provider nss = new sun.security.pkcs11.SunPKCS11(configFileName);
      Security.addProvider(nss);
      SecretKeyFactory keyFactory = SecretKeyFactory.getInstance("DESede", nss);
      DESedeKeySpec keySpec = new DESedeKeySpec(new String("laKuf1Tcc6sOhsdPf49=m4es").getBytes("UTF-8"));
      System.out.println("keyFactory provider: " + keyFactory.getProvider().getName());
      SecretKey key = keyFactory.generateSecret(keySpec);
      //iv for CBC mode - note, in practice you don't generate a random iv for decryption :)
      byte[] iv = new byte[8]; //64-bit block size for 3DES
      SecureRandom sr = SecureRandom.getInstance("PKCS11", nss);
      sr.nextBytes(iv);
      IvParameterSpec params = new IvParameterSpec(iv);
      Cipher decryptCipher = Cipher.getInstance("DESede/CBC/NoPadding", nss);
      decryptCipher.init(Cipher.DECRYPT_MODE, key, params);
      System.out.println("decryptCipher provider: " + decryptCipher.getProvider().getName());
    catch (Exception ex)
      ex.printStackTrace();
}Oh, I wouldn't expect your key loading to work when you switch over to FIPS mode.
cfg file:
name = NSScrypto
nssLibraryDirectory = /nss
nssSecmodDirectory = /nss
nssModule = fipsYields the following error:
java.security.spec.InvalidKeySpecException: java.security.InvalidKeyException: Could not create key
because you can't directly handle keying material in FIPS. You'll have to save the secret key in the NSS certDB or generate a random one each time and send it wrapped to the other side.

Building mesa with OpenCl support [Solved]

Hi,
I am trying to use OpenCl with the current mesa drivers as it is explained in this post from freedesktop: GalliumCompute, but when I try to install my own build of mesa with OpenCl it fails due to some conflicting files.
If we follow the post, we can see that we need:
- LLVM with '--enable-experimental-targets=R600', but the stable repo already provides this so we are fine.
- Libclc can be found in AUR: libclc-svn
- Mesa with '--enable-opencl'. This has to be built manually with ABS adding the flag to the PKGBUILD.
But when I try to install the generated packages I get an error because there are conflicting files:
error: failed to commit transaction (conflicting files)
mesa: /usr/include/CL/cl.h exists in filesystem
mesa: /usr/include/CL/cl.hpp exists in filesystem
mesa: /usr/include/CL/cl_ext.h exists in filesystem
mesa: /usr/include/CL/cl_gl.h exists in filesystem
mesa: /usr/include/CL/cl_gl_ext.h exists in filesystem
mesa: /usr/include/CL/cl_platform.h exists in filesystem
mesa: /usr/include/CL/opencl.h exists in filesystem
mesa: /usr/lib/libOpenCL.so exists in filesystem
mesa: /usr/lib/libOpenCL.so.1 exists in filesystem
mesa: /usr/lib/libOpenCL.so.1.0.0 exists in filesystem
Errors occurred, no packages were upgraded.
Checking with 'pacman -Qo' I have found that the headers come from 'opencl-headers' and the shared objects from 'libcl'.
So, is there a way to install mesa with OpenCl support?
Thanks in advance.
Last edited by Noxbru (2013-09-30 16:13:18)

Lordheavy's git packages are setup to make switching between mesa-git and mesa easy, so include provides/conflicts/replaces lines in the PKGBUILDs to ease substiution.
No need to uninstall mesa.
Mesa is a split package, and you should replace all parts of it.
If you run pacman -S mesa-git , there should be errors because all parts need to have been build against the same source,
but i don't know if pacman handles that correctly.
To be on the safe side, you should tell pacman to install ati-dri-git instead as that will pull the other necessary mesa-git subpackages.
about the files from opencl-headers & libcl :
mesa-git incudes opencl-mesa-git which does provide those files, but libclc-git doesn't have opencl-mesa-git as dependency.
I think the full command you should use is : pacman -S ati-dri-git opencl-mesa-git libclc-git .
That should pull in all needed pacakges and not give any conflicts.
Edit :
The PKGBUILD for LH's mesa-git are in http://pkgbuild.com/~lcarlier/mesa-git/sources/ .
I looked directly into the sources to verify what i posted above.
Last edited by Lone_Wolf (2013-09-30 11:57:12)

Vserver provider with arch support

Similar Messages

Maybe you are looking for