VT04 - Adding new select options in grouping screen for capacity criteria
Hi,
I am trying to add a new select option(min & max) for grouping the delivery based on the quanity/no of units just like the weight/volume. Is there an exit/enhancement available in the program. The program for VT04 is RV56TRGN and the actual program for grouping criteria is RV56TRSP.
I have looked into the user exit EXIT_SAPLV56M_001. This I guess is only for adding the grouping criteria and not for adding select options like weight/volume.... I would need to add something similar to this.
THnks
Chinna
You should search for Screen Exit .
Also you can check if any enhancement point is avaliable in screen display place.
You need to debud and find the exact place where this change will be required and then it will be easy to find the option for making desired changes.
Hope this helps you.
Similar Messages
-
Problem in adding new tabs in master data screens for RE-FX in ECC 6.0
Dear members,
I am working on RE-FX in ECC 6.0. I need some advice on the foll matter:
When displaying master data for Rental Object (Rental Space) (Tcode REBDRO) there are three tabs that are visible. They are General Data, Measurement and Area Shares. I would like the tab "Supplementary Texts" to also appear as the fourth tab. I have gone to the node Screen Sequence under the Dialog node under Usage View under Master Data in RE-FX.
I have added this screen to the sequence and have saved it successfully. Now when i am trying to display the rental space (RS) it is still not showing the tab that I just added. When I am trying to remove one of the existing tabs, by going into the same screen sequence I am successful in doing that. I am also able to add some of the other tabs. However every time I am trying to add the tab "Supplementary texts", I am failing to display it in the master data.
Request you to please help me as I am not an expert in RE-FX.
Regards,
Suvarghya DuttaHi Survaghya,
We are facing problem in adding tab to transaction RESCSU. We have followed all the steps mentioned by you , like
1. Go to transaction BUPT .
2. Select Application Object - transactuion BUS0.
3.Selected Application object as RESU.
4. And then went to all the following transactions.
RESCSU0002 SU: Field Groups
RESCSU0003 SU: Views
RESCSU0004 SU: Sections
RESCSU0005 SU: Screens
RESCSU0006 SU: Screen Sequences.
5. Created one z function group , having 2 FM for PBO and PAI.
6. Also one subscreen having the field mapped to CI_INCLUDE - CI_VISCSU.
But still we are not able to see the tab on the settlemet screen.
We tried changing the screen sequence of existing tabs, we could change that, but after performing all the steps mentioned above we could not add new tab.
Please suggest where are we committing a mistake.
Thanks & Regards,
Deepti -
Add new select option for VT04 variants
Hi Experts,
Want to know the process of how we add a new select option (say sold-to/KUNAG) to the existing set of selection criteria in the variants in VT04 apart from implicit enhancements.
Even if we create a new implicit enhancement in LV56LSCR, the new field (sold-to/KUNAG) has to be further added to the select statements also. The select statement in the subroutine INDEX_SELEKTIEREN in LV56LF01 has to be enhanced for the same.
Also should this new field has to be added to the EXPORT TO and IMPORT FROM MEMORY ID MEMORY_LFSL statements in the other includes of SAPLV56L ?
Is there a better/recommended way to do this? Any pointers are much appreciated. Thank You.
Regards,
Narendra.Hi Ravi,
This is infact the program for the txn VT04, would you be able to shed any other info? Thanks.
Regards,
Narendra.
Edited by: Narendra Daka on Dec 7, 2011 9:00 AM -
How to get the values of Select-options from the screen.
The value of parameter can be obtained by function module 'DYNP_VALUES_READ' but How to get the values of Select-options from the screen? I want the F4 help values of select-options B depending on the values in Select-option A.So I want to read the Select-option A's value.
Hi,
Refer this following code..this will solve your problem...
"Following code reads value entered in s_po select options and willprovide search
"help for s_item depending upon s_po value.
REPORT TEST.
TABLES : ekpo.
DATA: BEGIN OF itab OCCURS 0,
ebelp LIKE ekpo-ebelp,
END OF itab.
SELECT-OPTIONS s_po FOR ekpo-ebeln.
SELECT-OPTIONS s_item FOR ekpo-ebelp.
INITIALIZATION.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_item-low.
DATA:
dyn_field TYPE dynpread,
temp_fields TYPE TABLE OF dynpread,
zlv_dynpro TYPE syst-repid.
zlv_dynpro = syst-repid.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = zlv_dynpro
dynumb = syst-dynnr
request = 'A'
TABLES
dynpfields = temp_fields
EXCEPTIONS
OTHERS = 0.
LOOP AT temp_fields INTO dyn_field.
IF dyn_field-fieldname EQ 'S_PO-LOW'.
SELECT * INTO CORRESPONDING fields OF TABLE itab FROM ekpo
WHERE ebeln EQ dyn_field-fieldvalue.
EXIT.
ENDIF.
ENDLOOP. -
Add a new selection option on VL71
I want to add a new selection option on VL71.
I know that I can do an implicit enhancement.
But I am not sure if I can add it in the place as showed.
If the enhancement cannot solve the problem, do I have to copy out a Z program.Dear Experts,
In HUMO report, after the specail stock, We want add another selection field "Special Stock Number".
Do we need to go for a development for this?
Any alternate way available to get this done without much development involved? Pls suggest.
Regards,
Shetty -
Create a select option in a screen
Is it possible to create a select option in a screen?
I can easily create the 2 input boxes, but not with the little button on the right like when we create a select option in a report.
Is the any other simple way to create a select option without creating a report? (the reason is because I want to have everything in the same module pool)Hi,
Please refer to SAP's documentation here: http://help.sap.com/saphelp_nw70/helpdata/en/e4/2adbec449911d1949c0000e8353423/frameset.htm.
Especially Part 'Subscreens and Tabstrips for Selection Screens', there go to 'Selection Screens as Subscreens'.
HTH, Gerd Rother -
How to create the select option in the screen
HI,
I am developing one module pool program and I have below requirement,
currently plant is acting like PARAMETER and the now it should be changed to select option.
how to create the select option in the screen
Thanks and regarding,
Malla
Moderator message - Please search before asking - post locked
Edited by: Rob Burbank on Dec 16, 2009 1:41 PMTry RANGES.
The RANGES has same structure as that of select-options. -
Output from tables which I mention in select options of the screen as input
Dear All,
I want to fetch the data in the form of output from tables which I will mention in select options of the screen as input.
In selection screen option if I write any table name then how can i select this table in select query of ABAP program ?.
I may select any tables in select options of screen. But In select query I should get that table name automatically.. How ?
e.g. If i put table name as an input i.e. MARA in select option .
In program how to write select query to get records from that table ?
SELECT MTART MATKL from MARA
Every time I should not go to select query of program & replace the tablename.
How to solve this problem ?Hi,
PARAMETERS p_table(30)." type string.
"This is a Tested code Just Execute and Check
START-OF-SELECTION.
DATA: lt_tmp TYPE REF TO data.
DATA : line TYPE REF TO data.
FIELD-SYMBOLS: <lt_tmp> TYPE STANDARD TABLE, <wa>, <dyn_field>.
CREATE DATA lt_tmp TYPE STANDARD TABLE OF (p_table).
ASSIGN lt_tmp->* TO <lt_tmp> .
CREATE DATA line LIKE LINE OF <lt_tmp>.
ASSIGN line->* TO <wa>.
SELECT * FROM (p_table) INTO TABLE <lt_tmp>.
IF sy-subrc = 0.
LOOP AT <lt_tmp> ASSIGNING <wa>.
DO.
ASSIGN COMPONENT sy-index
OF STRUCTURE <wa> TO <dyn_field>.
IF sy-subrc NE 0.
EXIT.
ENDIF.
IF sy-index = 1.
WRITE:/ <dyn_field>.
ELSE.
WRITE: <dyn_field>.
ENDIF.
ENDDO.
ENDLOOP.
ENDIF.
Cheerz
Ram -
Select-options/range in screen
Hi all,
I just wanted to display select-options in the screen numbered 1000,
by putting which control can i do this ??........
regards
Joseif u want to pass values in the selection screen use
Ex:
selection-screen begin of block b1
select-options : p_matnr for mara-matnr.
selection-screen end of block b1.
else if u want to pass while execution of program
use Ranges
Ex: ranges: p_matnr for mara-matnr.
Pass variables
p_matnr-low, p_matnr-high....................
Regards,
Ajay -
Multiple select-options in a screen But no screen space
Dear Experts,
I have mutiple select options in a screen, i am finding it a problem to display them all in one screen.
it should be done with out any vertical scroll nor horizontol scroll.
Awaiting to hear from you all.
Regards,
KarthikHi,
You can include more than one selct options or parameters in a single line..that might be favourable as u do not want to have scrolls..
the syntax goes like this
SELECTION-SCREEN BEGIN OF LINE.
<declare your parameters and select options>
SELECTION-SCREEN end OF LINE.
whatever u have written between begin of line and end of line will appear in a line..in this way you can reduce the page size..Hope the information was useful.
Regards
Vasavi
Edited by: Vasavi Kotha on Jan 6, 2009 5:29 PM -
I set up a new PIN to lock my screen for security. Now I can't unlock it. Any idea how to undo this so I can use my phone again?
Someone else had replied with that same remedy and if that's all it takes, no worries. However, it is tellig me that after 10 unsuccessful tries it will reset my phone back to zero and I lose everything...pictures, emails, texts,etc. Is this true or not...do you know? Thanks.
-
Error V0 104 while adding select option on customized screen
Hi all,
I have a screen added on the standard transaction IW21 (with selection screen definition and called like subscreen). On this screen I have some SELECT-OPTIONS and when I press the button of selecting multiple values, I get the following message: "Requested function & is not available here" (V0 104), where & is long number starting with %..I have added entries to the tables T185F and T185 with the transaction VFBS, but I dont know how to assign the Function codes to SELECT-OPTIONS..
Thanks in advance for feedback!
Anna
Edited by: Anna L on Jul 16, 2008 11:03 AMJust an explanation: no matter the error message I get, the values are transferred correctly from the multiple selection screen to my screen.
I hope somebody got similar case and can give me some hint...
Thank you,
Anna -
Adding new field to detail data screen of object link
Hi All,
I've a requirement of adding a new field to the detail screen of object link. But the field is a combination of 3 other standard fields.
Please let me know how could i realise this functionality?
Thanks in advance.Hi Srini,
Thanks for your Reply
I have kept 01 against the field BSEG-AUGDT and selected the preselect check box also.
But still that field is not visible in the dynamic selection screen.
Thanks
Ajay.D -
Select options in dialog screen
Hi all,
I have used this logic in my program (ZSDIC001),
selection-screen begin of screen 1010 as subscreen.
selection-screen begin of block b1 with frame title text-001.
parameters: p_rad1 radiobutton group grp1 default 'X',
p_rad2 radiobutton group grp1,
p_rad3 radiobutton group grp1.
select-options: s_matnr for mara-matnr,
s_matkl for mara-matkl,
s_mtart for mara-mtart.
selection-screen end of block b1.
selection-screen end of screen 1010.
start-of-selection.
call screen 100.
*& Module STATUS_0100 OUTPUT
module status_0100 output.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
endmodule.
*& Module USER_COMMAND_0100 INPUT
module user_command_0100 input.
endmodule.
create screen 100 and create a subscreen area called "subscreen_1010"
Screen Flow Logic follows
*process before output.
module status_0100.
call subscreen subscreen_1010 including sy-repid '1010'.
*process after input.
call subscreen subscreen_1010 .
module user_command_0100.
But i get this error,
Error when generating the selection screen "1010" of report "ZSDIC001".
Can anyone help me out to solve this problem.
Thanks,
Rajesh.I've copied your code and it generated fine without any error.
Possibly your subscreen container is to small.
Regards
Tobias -
How to hide a select option on slelection screen??
Hi all,
I wanna hide a screen field (select option) on selection-screen. I looped the screen in AT SELECTION-SCREEN OUTPUT and found the name of screen to hide. But the <option_name>_low and <option_name>_high are always show here.
Who can give me a way to do that???
In fact, i wanna hide or display the select option after choosing a radiobutton.Who can give me a way??Hi,
Check the below code.
tables: pa0000, pa0001.
parameters: p_rad1 radiobutton group rad1 default 'X' user-command rusr,
p_rad2 radiobutton group rad1,
p_rad3 radiobutton group rad1,
p_rad4 radiobutton group rad1,
p_rad5 radiobutton group rad1.
selection-screen: begin of block blk1 with frame.
select-options: s_pernr for pa0000-pernr modif id ABC,
s_stat2 for pa0000-stat2 modif id DEF,
s_werks for pa0001-werks modif id GHI,
s_persg for pa0001-persg modif id JKL,
s_persk for pa0001-persk modif id MNO.
selection-screen: end of block blk1.
AT SELECTION-SCREEN output.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'ABC'.
IF p_rad1 = 'X'.
SCREEN-ACTIVE = 1.
ELSE.
SCREEN-ACTIVE = 0.
ENDIF.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'DEF'.
IF p_rad2 = 'X'.
SCREEN-ACTIVE = 1.
ELSE.
SCREEN-ACTIVE = 0.
ENDIF.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'GHI'.
IF p_rad3 = 'X'.
SCREEN-ACTIVE = 1.
ELSE.
SCREEN-ACTIVE = 0.
ENDIF.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'JKL'.
IF p_rad4 = 'X'.
SCREEN-ACTIVE = 1.
ELSE.
SCREEN-ACTIVE = 0.
ENDIF.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'MNO'.
IF p_rad5 = 'X'.
SCREEN-ACTIVE = 1.
ELSE.
SCREEN-ACTIVE = 0.
ENDIF.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
*Note
*Titles for Rado buttons and parameters.
*P_RAD1 Personal Number
*P_RAD2 Employment Status
*P_RAD3 Personnel Area
*P_RAD4 Employee Group
*P_RAD5 Employee Sub group
*S_PERNR Personal Number
*S_PERSG Employee Group
*S_PERSK Employee Sub group
*S_STAT2 Employment Status
*S_WERKS Personnel Area
Maybe you are looking for
-
Installed new RAM now computer wont start up
I just installed 2GB of RAM in my iMac and removed the 512mb card it had originally.when i pressed the power button it beeps fast a few time then the fan starts working really fast. The screen doesnt turn on only the sleep light blinks as the fan run
-
Need instant help about Nokia 5200
Hi, I using Nokia 5200 since 12/2007 but now it has two problems. 1. When I recive or make a call to people they didn't hear my voice but i can hear it. 2. My mobile didn't record voice both on audio recorder and video recorder only voiceless vidio i
-
CONTRACTS FOR SERVICE ACTIVITY MASTERS
We have created contracts (Document type MK) with item category service. When creating a Purchase Requisition for the Service Activity Master, source determination is not done with reference to the contract. The contract number and line item number m
-
Screen switches to blue and then fades back to normal repeatedly
My Mac Pro's screens have started switching to blue and then fading back to show the normal screen contents. Each cycle takes a couple seconds and looks like my Mac thinks it's waking up from sleep. It starts off happening a few times a minute and ge
-
Firefox crashes when uploading/downloading files from/to 'desktop folder'
Hello I'm hoping, that you can help me! I'm using Firefox 28.0 on MacBook Pro Mavericks 10.9.2 Firefox crashes/freezes when I try to upload/download files from/to my 'desktop folder'. I't only happens, when I use this folder. Download to 'download fo