VWIC2-1MFT-T1/E1 support to connect back to back with VWIC3-1MFT-T1/E1

Hi
i have two Cisco router 3925 and 2921 one with VWIC2-1MFT-T1/E1 card and DSP PVDM2-32 with adapter and another one with VWIC3-1MFT-T1/E1 card and DSP PVDM2-32 with i need connect the two router using T1 port back to back .
the VWIC2 and VWIC 3 compatible for connect to gather?

Hi, the VWIC (any type) is the right product, will do exactly what you need (called channelized interface), and eliminates the need for an external unit and tens of cables.
E1 has 31 channels and that is the max. number of channel-groups that you can configure per port.

Similar Messages

Are Modules PVDM2-12DM and VWIC2-1MFT-T1/E1 supported between each other?

Hello everyone!
I have Cisco 2911 with c2900-universalk9_npe-mz.SPA.152-2.T.bin.
Here is question: module PVDM2-12DM is supported with module VWIC2-1MFT-T1/E1?
Because I can not configure digital modem to accept call from E1 with error message: ISDN Se0/0/0:15 **ERROR**: accept_incoming_csm_call: modem problem Service denied(0xD): b channel 2, call id 0x16.
Thank you for answer!

No.
The supported modules are described in the PVDM2'DM data sheet, and software release notes.

TS1591 my classic iPod no longer appears in iTunes window when connected to iMac. does this mean my device is no longer supported by iTunes? or incompatible with OSX?

my classic iPod no longer appears in iTunes window when connected to iMac. does this mean my device is no longer supported by iTunes? or incompatible with OSX?

Hello stiannac
Check out the article below for troubleshooting to get your iPod showing back up on your iMac
iPod not recognized in iTunes and Mac desktop
http://support.apple.com/kb/ts1410
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Javax.jms.JMSException: Not supported in XA-backed session outside globaltx

I am trying to setup OracleOJMS provider and tries to access queue and post to queue from a normal jsp for testing.
I am getting the following
code:
javax.jms.JMSException: Not supported in XA-backed session outside global transaction
     at oracle.j2ee.ra.jms.generic.RAUtils.make(RAUtils.java:525)
     at oracle.j2ee.ra.jms.generic.RAUtils.toJMSException(RAUtils.java:199)
     at oracle.j2ee.ra.jms.generic.RAUtils.toJMSException(RAUtils.java:210)
     at oracle.j2ee.ra.jms.generic.CommonProducerWrapper.prepareForSend(CommonProducerWrapper.java:350)
     at oracle.j2ee.ra.jms.generic.CommonProducerWrapper.send(CommonProducerWrapper.java:159)
     at ResourceProvider.jspService(_ResourceProvider.java:112)
     at com.orionserver[Oracle Containers for J2EE 10g (10.1.3.1.0) ].http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:453)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:591)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:515)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:711)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
Steps i have done
ResourceProvider.jsp
code:

<%@ page import="javax.jms.QueueConnectionFactory "%>
<%@ page import="javax.jms.XAQueueConnectionFactory "%>
<%@ page import="javax.jms.QueueConnection "%>
<%@ page import="javax.jms.QueueSession "%>
<%@ page import="javax.jms.Queue "%>
<%@ page import="javax.jms.QueueSender "%>
<%@ page import="javax.jms.Message "%>
<%@ page import="javax.jms.Session "%>
<%@ page import="javax.naming.Context "%>
<%@ page import="javax.naming.InitialContext "%>
<html>
<head>
<title>
Configuration of ResourceProvider for Advanced Queueing
</title>
</head>
<body>
<form name="TestResourceProvider" method="GET">
<%
// Check if the message has to be enqueued
if (request.getParameter("Message") != null){
Context jndiContext = new InitialContext();
XAQueueConnectionFactory queueCF = (XAQueueConnectionFactory)jndiContext.lookup
("java:comp/env/jms/InQueueCF");
Queue queue = (Queue)jndiContext.lookup("java:comp/env/jms/InQueue");
QueueConnection queueConnection = queueCF.createQueueConnection();
// Start the Connection
queueConnection.start();
QueueSender sender = queueSession.createSender(queue);
Message msg = queueSession.createTextMessage(request.getParameter("Message"));
sender.send(msg);
queueSession.commit();
sender.close();
queueSession.close();
queueConnection.close();
%>
<%
}else{
// User can enter the message to be enqueued through here
%>
Enter the message to be enqueued
<INPUT type="text" name="Message">
<br><br>
<input type="Submit" value="Enqueue Message">
<%
%>
</form>
</body>
</html>
My Steps for OJMS PRovider
1. Creating AQ queue in DB
2. configuration of resource adapter and provider
3. configuration of connection factories for resourceadapter[jmsconnector]
code:
1. Created the Queue table in DB using the sql
DROP USER jmsuser CASCADE;
GRANT connect, resource,AQ_ADMINISTRATOR_ROLE TO jmsuser IDENTIFIED BY jmsuser;
GRANT execute ON sys.dbms_aqadm TO jmsuser;
GRANT execute ON sys.dbms_aq TO jmsuser;
GRANT execute ON sys.dbms_aqin TO jmsuser;
GRANT execute ON sys.dbms_aqjms TO jmsuser;
connect jmsuser/jmsuser;
-- Create table to hold the queue, then create queue.
-- For topics multiple_consumers must be true
BEGIN
DBMS_AQADM.CREATE_QUEUE_TABLE( Queue_table => 'SMSCP_INQTBL', Queue_payload_type => 'SYS.AQ$_JMS_MESSAGE',
sort_list => 'PRIORITY,ENQ_TIME', multiple_consumers => false, compatible => '8.1.5');
DBMS_AQADM.CREATE_QUEUE( Queue_name => 'SMSCP_INQ', Queue_table => 'SMSCP_INQTBL');
DBMS_AQADM.START_QUEUE(queue_name => 'SMSCP_INQ');
END;
quit;
Now our queue Name is queue Name : SMSCP_INQ table Name: SMSCP_INQTBL
2. Creating the Cp and datasource for the db [jmsuser] to make java to access queue
Creating ConnectionPool jmsDBPool
Creating DataSource jmsDBDataSource
Jndi jdbc jdbc/JMSDBDS
After creating, i got the following data-sources.xml
DATASOURCES.XML
<?xml version = '1.0' encoding = 'UTF-8'?>
<data-sources xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.oracle.com/oracleas/schema/data-sources-10_1.xsd" schema-major-version="10" schema-minor-version="1">

<managed-data-source connection-pool-name="Example Connection Pool" jndi-name="jdbc/OracleDS" name="OracleDS"/>

     <managed-data-source connection-pool-name="jmsDBPool" jndi-name="jdbc/JMSDBDS" name="jmsDBDataSource"/>

<connection-pool name="Example Connection Pool">
<connection-factory factory-class="oracle.jdbc.pool.OracleDataSource" user="scott" password="tiger" url="jdbc racle:thin:@//localhost:1521/ORCL"/>
</connection-pool>

<connection-pool name="jmsDBPool">
<connection-factory factory-class="oracle.jdbc.pool.OracleDataSource" user="jmsuser" password="jmsuser" url="jdbc racle:thin:@//localhost:1521/xe"/>
</connection-pool>
</data-sources>
3. JMS Connector Task. Customising the ra.xml
ra.xml

<resourceadapter>
<resourceadapter-class>oracle.j2ee.ra.jms.generic.JMSResourceAdapter</resourceadapter-class>
<config-property>
<config-property-name>lookupMethod</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>resourceProvider</config-property-value>
</config-property>
<config-property>
<config-property-name>resourceProviderName</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>testResourceProvider</config-property-value>
</config-property>

          <adminobject>
<adminobject-interface>javax.jms.Queue</adminobject-interface>
<adminobject-class>oracle.j2ee.ra.jms.generic.AdminObjectQueueImpl</adminobject-class>
<config-property>
<config-property-name>jndiName</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>Queues/MY_QUEUE</config-property-value>
</config-property>
<config-property>
<config-property-name>resourceProviderName</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>testResourceProvider</config-property-value>
</config-property>
</adminobject>

<adminobject>
<adminobject-interface>javax.jms.Queue</adminobject-interface>
<adminobject-class>oracle.j2ee.ra.jms.generic.AdminObjectQueueImpl</adminobject-class>
<config-property>
<config-property-name>resourceProviderName</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>testResourceProvider</config-property-value>
</config-property>
</adminobject>
<adminobject>
<adminobject-interface>javax.jms.Topic</adminobject-interface>
<adminobject-class>oracle.j2ee.ra.jms.generic.AdminObjectTopicImpl</adminobject-class>
<config-property>
<config-property-name>resourceProviderName</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>testResourceProvider</config-property-value>
</config-property>
</adminobject>
</resourceadapter>
4. Create a JMS Connector INstance
oc4j-connectors.xml
     <connector name="testResourceAdapter" path="testResourceAdapter.rar">
          <config-property name="lookupMethod" value="resourceProvider"/>
          <config-property name="resourceProviderName" value="testResourceProvider"/>
          
          
     </connector>
5. RA Connection Factories
<?xml version="1.0" encoding="UTF-8"?>
<oc4j-connector-factories xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:noNamespaceSchemaLocation="http://xmlns.oracle.com/oracleas/schema/oc4j-connector-factories-10_0.xsd"
schema-major-version="10"
schema-minor-version="0">
<connector-factory location="resourceAdapterXAQCF/MYXAQCF" connector-name="testResourceAdapter">
<config-property name="jndiLocation" value="XAQueueConnectionFactories/XAQCF"/>
<connection-pooling use="private">
<property name="waitTimeout" value="300" />
<property name="scheme" value="fixed_wait" />
<property name="maxConnections" value="50" />
<property name="minConnections" value="0" />
</connection-pooling>
<connectionfactory-interface>javax.jms.XAQueueConnectionFactory</connectionfactory-interface>
</connector-factory>
</oc4j-connector-factories>
orion-web.xml
<?xml version="1.0"?>
<orion-web-app
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.oracle.com/oracleas/schema/orion-web-10_0.xsd"      deployment-version="10.1.3.1.0"
     deployment-time="1218369811921"
     jsp-cache-directory="./persistence"
     jsp-cache-tlds="standard"
     temporary-directory="./temp"
     context-root="/smscpReceiver"
schema-major-version="10" schema-minor-version="0" >
     
     <resource-ref-mapping name="jms/InQueueCF" location="resourceAdapterXAQCF/MYXAQCF" />
     <message-destination-ref-mapping location="resourceAdapterInQ/MYINQ" name="jms/InQueue">
          </message-destination-ref-mapping>
     <web-app>
     </web-app>
</orion-web-app>
web.xml
<resource-ref>
     <res-ref-name>jms/InQueueCF</res-ref-name>
     <res-type>javax.jms.XAQueueConnectionFactory</res-type>
     <res-auth>Container</res-auth>
</resource-ref>
<message-destination-ref>
     <message-destination-ref-name>jms/InQueue</message-destination-ref-name>
     <message-destination-type>javax.jms.Queue</message-destination-type>
     <message-destination-usage>Produces</message-destination-usage>
     <message-destination-link>jms/InQueue</message-destination-link>
</message-destination-ref>
<message-destination>
<message-destination-name>jms/InQueue</message-destination-name>
</message-destination>

Sorry for the jammed one
Neat one.
am trying to setup OracleOJMS provider and tries to access queue and post to queue from a normal jsp for testing.
I am getting the following
javax.jms.JMSException: Not supported in XA-backed session outside global transaction
at oracle.j2ee.ra.jms.generic.RAUtils.make(RAUtils.java:525)
at oracle.j2ee.ra.jms.generic.RAUtils.toJMSException(RAUtils.java:199)
at oracle.j2ee.ra.jms.generic.RAUtils.toJMSException(RAUtils.java:210)
at oracle.j2ee.ra.jms.generic.CommonProducerWrapper.prepareForS
INVOCATION
<form name="TestResourceProvider" method="GET">
<%
// Check if the message has to be enqueued
if (request.getParameter("Message") != null){
Context jndiContext = new InitialContext();
XAQueueConnectionFactory queueCF = (XAQueueConnectionFactory)jndiContext.lookup
("java:comp/env/jms/InQueueCF");
Queue queue = (Queue)jndiContext.lookup("java:comp/env/jms/InQueue");
QueueConnection queueConnection = queueCF.createQueueConnection();
// Start the Connection
queueConnection.start();
QueueSender sender = queueSession.createSender(queue);
Message msg = queueSession.createTextMessage(request.getParameter("Message"));
sender.send(msg);
queueSession.commit();
sender.close();
queueSession.close();
queueConnection.close();
%>
<%
}else{
// User can enter the message to be enqueued through here
%>
Enter the message to be enqueued
<INPUT type="text" name="Message">
<br><br>
<input type="Submit" value="Enqueue Message">
<%
%>
</form>
</body>
</html>
---------------------

When I try to download the windows support software it is coming up with an error message saying I am not connected to the internet but having checked the network diagnostics several times I am definitely connected but it still won't work. Any ideas?

When I try to download the windows support software it is coming up with an error message saying I am not connected to the internet but having checked the network diagnostics several times I am definitely connected but it still won't work. Any ideas?

I get a problem like yours. I have a mac mini with 2 hdds the server and hd2 I installed windows 7 and the windows works fine. except it will not allow me to get on the net. I get error 651. I can boot back to lion and the internet connection works. I googled and error 651 does seem to show up. I would like a work around.

How to return jolt connection back to the joltpool?

hi
I used following codes to get joltconnection pool:
SessionPool sessionPool = sessionPoolManager.getSessionPool(poolName);
     DataSet request = new DataSet(requestString.length()*2);
     request.setValue("STRING", requestString);
     Result result = sessionPool.call(serviceName, request, null);
     return (String) result.getValue("STRING", null);
my question is : how to return jolt connection back to the joltpool? do I need
to do that?
when I used jdbc connection pool, I used conn.close() to return
to jdbc connection pool. Is there any method like "close()" in
jdbc connection?
Wei Jiang

Hi,
The below is the simple source code using Pool which it is extracted from
BEA's support web site.
and it is helpful.
The Pool doesn't need to return jolt connection back to the joltpool.
because it is done by Pool Manager automatically.
import bea.jolt.*;
import bea.jolt.pool.*;
public class Pho2 {
public static void main(String argv[])
try
String[] adresses = new String[1];
adresses[0] = "//aglaia:7040";
// creation du manager et du pool par defaut
SessionPoolManager sessionPoolManager = new SessionPoolManager();
int i = sessionPoolManager.createSessionPool(adresses, null, 1, 3, new
UserInfo(), null);
SessionPool sessionPool = sessionPoolManager.getSessionPool(null);
DataSet dataset = new DataSet();
Result result=null;
dataset.setValue("rhaine","coucou");
try
result = sessionPool.call("TOUPPER", dataset, null);
catch(Exception Ex)
System.out.println("session");
Ex.printStackTrace();
System.out.println("dataset="+dataset);
System.out.println("result ="+result);
System.out.println("ApplicationCode="+(new
Integer(result.getApplicationCode())).toString());
catch(Exception Ex)
System.out.println(Ex.getMessage());
Hope this helps.
Mr, Ko.
"wei jiang" <[email protected]> wrote in message
news:[email protected]..
>
hi
I used following codes to get joltconnection pool:
SessionPool sessionPool = sessionPoolManager.getSessionPool(poolName);
DataSet request = new DataSet(requestString.length()*2);
request.setValue("STRING", requestString);
Result result = sessionPool.call(serviceName, request, null);
return (String) result.getValue("STRING", null);
my question is : how to return jolt connection back to the joltpool? do Ineed
to do that?
when I used jdbc connection pool, I used conn.close() to return
to jdbc connection pool. Is there any method like "close()" in
jdbc connection?
Wei Jiang

How do I get the internet connection back onto ipad even though it connects to Wifi successfully and I have checked on my iPhone which does connect via the same wifi and to the internet?

How do I get the internet connection back onto ipad even though it connects to Wifi successfully and I have checked on my iPhone which does connect via the same wifi and to the internet?

Your router may not have given your iPod a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make/model, the wifi security being used (WEP, WPA, WPA2), etc.

Javax.jms.JMSException: Not supported in XA-backed sessionoutside global tx

I am trying to setup OracleOJMS provider and tries to access queue and post to queue from a normal jsp for testing.
I am getting the following
javax.jms.JMSException: Not supported in XA-backed session outside global transaction
     at oracle.j2ee.ra.jms.generic.RAUtils.make(RAUtils.java:525)
     at oracle.j2ee.ra.jms.generic.RAUtils.toJMSException(RAUtils.java:199)
     at oracle.j2ee.ra.jms.generic.RAUtils.toJMSException(RAUtils.java:210)
     at oracle.j2ee.ra.jms.generic.CommonProducerWrapper.prepareForSend(CommonProducerWrapper.java:350)
     at oracle.j2ee.ra.jms.generic.CommonProducerWrapper.send(CommonProducerWrapper.java:159)
     at _ResourceProvider._jspService(_ResourceProvider.java:112)
     at com.orionserver[Oracle Containers for J2EE 10g (10.1.3.1.0) ].http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:453)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:591)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:515)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:711)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)I have posted query in this link.
http://saloon.javaranch.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic&f=14&t=001837
Can you please help me out?

Sorry for the jammed one
Neat one.
am trying to setup OracleOJMS provider and tries to access queue and post to queue from a normal jsp for testing.
I am getting the following
javax.jms.JMSException: Not supported in XA-backed session outside global transaction
at oracle.j2ee.ra.jms.generic.RAUtils.make(RAUtils.java:525)
at oracle.j2ee.ra.jms.generic.RAUtils.toJMSException(RAUtils.java:199)
at oracle.j2ee.ra.jms.generic.RAUtils.toJMSException(RAUtils.java:210)
at oracle.j2ee.ra.jms.generic.CommonProducerWrapper.prepareForS
INVOCATION
<form name="TestResourceProvider" method="GET">
<%
// Check if the message has to be enqueued
if (request.getParameter("Message") != null){
Context jndiContext = new InitialContext();
XAQueueConnectionFactory queueCF = (XAQueueConnectionFactory)jndiContext.lookup
("java:comp/env/jms/InQueueCF");
Queue queue = (Queue)jndiContext.lookup("java:comp/env/jms/InQueue");
QueueConnection queueConnection = queueCF.createQueueConnection();
// Start the Connection
queueConnection.start();
QueueSender sender = queueSession.createSender(queue);
Message msg = queueSession.createTextMessage(request.getParameter("Message"));
sender.send(msg);
queueSession.commit();
sender.close();
queueSession.close();
queueConnection.close();
%>
<%
}else{
// User can enter the message to be enqueued through here
%>
Enter the message to be enqueued
<INPUT type="text" name="Message">
<br><br>
<input type="Submit" value="Enqueue Message">
<%
%>
</form>
</body>
</html>
---------------------

Using Outlook for Mac; emails and calendar announcements will not send--error message: "the server does not support secure connections" Help?

Am using Outlook calendar for Mac--needed for client connection. Invites will not go out. Error message: "server does not support secure connections." Resolution?

I have done a similar set of things and no results.
This is really odd, Mac Mail works other emasil clients work, just not Outlook.
The only event I can tie it back to is the outage a couple of weeks ago when AppleID's weren't working for a perdion of time. I ended up having to reset mine.
Is it feasible a local certificate got corrupted at the same or, oddly, that the SMTP servers don't have the updated password?
What's odd is that I no matter how much i Google, i can't find anyone else who has this problem, other than here?

HT1695 am using ipod touch, but my ipod cant support wifi connection. could you please give solution,,

am using ipod touch, but my ipod cant support wifi connection. could you please give solution,,

Is this your problem:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
It is frequently a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Otherwise:
Does the iPod connect to other networks?
Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>GeneralReset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Gramin connect don't work with Firefox 5. how can i go back to firefox 4?

Garmin Communicator Plugin
Garmin Communicator Plugin Communication with your Garmin GPS just got easier thanks to the Garmin Communicator Plugin — the free Internet browser plugin that sends and retrieves data from Garmin GPS devices.
The Garmin Communicator Plugin lets you connect your Garmin GPS with your favorite website. Once the plugin is installed, just connect your Garmin GPS device to your computer, and you’re on your way. The Garmin Communicator can send and retrieve data from any supported website.
http://www8.garmin.com/products/communicator/
I CANNOT DOWNLOAD THE ABOVE

Extensions for Firefox, such as the Google Toolbar, include a list of compatible Firefox versions. Currently, the Google Toolbar only goes up to Firefox 4. However, people have tested and it actually works on Firefox 5, so there are two workarounds:
(1) Edit a file to revise the range of compatible versions
(2) Install an add-on that lets you ignore the range of compatible versions
This thread has info on both approaches: [https://support.mozilla.com/en-US/questions/837142 google toolbar does not work with firefox 5.0. why not! | Firefox Support Forum | Firefox Help].
Any luck?
Oh, and due to security vulnerabilities, rolling back to Firefox 4.0.1 is not recommended.

Hi all, I'm trying to connect my macbook pro to Sony Bravia tv using Kanex Mini DisplayPort to HDMI Cable with Audio Support , when connected to the HDMI on tv I get a picture of the mac screen saver ( the starburst ) no video/audio,thanks, Derek

Hi all, I'm trying to connect my macbook pro to Sony Bravia tv using Kanex Mini DisplayPort to HDMI Cable with Audio Support , when connected to the HDMI on tv I get a picture of the mac screen saver ( the starburst ) no video/audio,any ideas? thanks, Derek

Dave I'm glad to say that it works perfectly but I'm embarrassed to say that my 12 year old nephew hooked it up in about 10 minutes.
If you have the Kanex Mini DisplayPort cable it will work, what confused me was changing the display settings in System Preferences,
and dragging the mac screen from the mac onto the tv. Sorry I cant be more helpful but you have the right cable now you need a 12 year old nephew.
Good luck Derek

"DBSL does not support extended connect protocol" while configuring SSFS

Hi, I'm trying to configure ssfs on ERP EHP7 on HANA Database system. Doing it with this guide - SSFS Implementation for Oracle Database
But when I'm trying to test connection with r3trans I got following error in the log:
4 ETW000 [     dev trc,00000] read_con_info_ssfs(): DBSL does not support extended connect protocol
4 ETW000                         ==> ssfs won't be used                                                   26 0.004936
I already updated DBSL_LIB to the latest version, but it doesn't help.
Here is full log:
4 ETW000 C:\usr\sap\CM1\DVEBMGS04\exe\R3trans.EXE version 6.24 (release 741 - 16.05.14 - 20:14:06).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 02.06.2014 - 13:49:16
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: C:\usr\sap\CM1\DVEBMGS04\exe\R3trans.EXE -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [     dev trc,00000] Mon Jun 02 13:49:16 2014                                                 106 0.000106
4 ETW000 [     dev trc,00000] db_con_init called                                                        36 0.000142
4 ETW000 [     dev trc,00000] set_use_ext_con_info(): ssfs will be used to get connect information
4 ETW000                                                                                                  61 0.000203
4 ETW000 [     dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000                                                                                                  26 0.000229
4 ETW000 [     dev trc,00000] create_con (con_name=R/3)                                                 17 0.000246
4 ETW000 [     dev trc,00000] Loading DB library 'dbhdbslib.dll' ...                                    46 0.000292
4 ETW000 [     dev trc,00000] DlLoadLib success: LoadLibrary("dbhdbslib.dll"), hdl 0, count 1, addr 000007FEED100000
4 ETW000                                                                                                3840 0.004132
4 ETW000 [     dev trc,00000]      using "C:\usr\sap\CM1\DVEBMGS04\exe\dbhdbslib.dll"                    21 0.004153
4 ETW000 [     dev trc,00000] Library 'dbhdbslib.dll' loaded                                            21 0.004174
4 ETW000 [     dev trc,00000] function DbSlExpFuns loaded from library dbhdbslib.dll                    42 0.004216
4 ETW000 [     dev trc,00000] Version of 'dbhdbslib.dll' is "741.10", patchlevel (0.22)                 81 0.004297
4 ETW000 [     dev trc,00000] function dsql_db_init loaded from library dbhdbslib.dll                   25 0.004322
4 ETW000 [     dev trc,00000] function dbdd_exp_funs loaded from library dbhdbslib.dll                  41 0.004363
4 ETW000 [     dev trc,00000] } DbSlHDBControl(rc=0)                                                    47 0.004410
4 ETW000 [     dev trc,00000] { DbSlHDBControl(con_hdl=-1,command=39,arg_p=0000000000000000)            24 0.004434
4 ETW000 [     dev trc,00000] } DbSlHDBControl(rc=0)                                                    18 0.004452
4 ETW000 [     dev trc,00000] { DbSlHDBControl(con_hdl=-1,command=10,arg_p=000000000205F170)            22 0.004474
4 ETW000 [     dev trc,00000] } DbSlHDBControl(rc=0)                                                    17 0.004491
4 ETW000 [     dev trc,00000] New connection 0 created                                                  17 0.004508
4 ETW000 [     dev trc,00000] 0: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , bc = NO , oc = 000, hc = NO , perm = YES, reco = NO , info = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000                                                                                                  38 0.004546
4 ETW000 [     dev trc,00000] { DbSlHDBControl(con_hdl=-1,command=10,arg_p=0000000141BAEDB0)            44 0.004590
4 ETW000 [     dev trc,00000] } DbSlHDBControl(rc=0)                                                    19 0.004609
4 ETW000 [     dev trc,00000] db_con_connect (con_name=R/3)                                             19 0.004628
4 ETW000 [     dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000                                                                                                  24 0.004652
4 ETW000 [     dev trc,00000] find_con_by_name found the following connection:                          17 0.004669
4 ETW000 [     dev trc,00000] 0: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , bc = NO , oc = 000, hc = NO , perm = YES, reco = NO , info = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000                                                                                                 164 0.004833
4 ETW000 [     dev trc,00000] read_con_info_ssfs(): reading connect info for connection R/3             34 0.004867
4 ETW000 [     dev trc,00000] { DbSlHDBControl(con_hdl=-1,command=74,arg_p=0000000000000000)            24 0.004891
4 ETW000 [     dev trc,00000] } DbSlHDBControl(rc=15)                                                   19 0.004910
4 ETW000 [     dev trc,00000] read_con_info_ssfs(): DBSL does not support extended connect protocol
4 ETW000                         ==> ssfs won't be used                                                   26 0.004936
4 ETW000 [     dev trc,00000] { DbSlHDBConnect(con_info_p=0000000000000000)                             31 0.004967
4 ETW000 [     dev trc,00000] DBHDBSLIB : version 741.10, patch 0.022 (Make PL 0.26)                    34 0.005001
4 ETW000 [     dev trc,00000] HDB shared library (dbhdbslib) patchlevels (last 10)                      32 0.005033
4 ETW000 [     dev trc,00000]    (0.022) Get database version via dbsl call (note 1976918)               24 0.005057
4 ETW000 [     dev trc,00000]    (0.020) FDA: Core Dump in SELECT ... FOR ALL ENTRIES for tables with strings (note 1970276)
4 ETW000                                                                                                  32 0.005089
4 ETW000 [     dev trc,00000]    (0.020) SQL DDL with data aging (note 1897636)                          21 0.005110
4 ETW000 [     dev trc,00000]    (0.017) Datatype NCLOB missing in tablesize calculation (note 1952609)
4 ETW000                                                                                                  30 0.005140
4 ETW000 [     dev trc,00000]    (0.014) Tablesize calculation for HANA optimized (note 1952609)         25 0.005165
4 ETW000 [     dev trc,00000]    (0.014) Native SQL UPSERT with DataAging (note 1897636)                 21 0.005186
4 ETW000 [     dev trc,00000]    (0.014) DBSL supports HANA revision number up to 3 digits (note 1952701)
4 ETW000                                                                                                  27 0.005213
4 ETW000 [     dev trc,00000]    (0.010) Quotes missing by FAE with the hint dbsl_equi_join (note 1939234)
4 ETW000                                                                                                  28 0.005241
4 ETW000 [     dev trc,00000]    (0.007) Obsere deactivate aging flag (note 1897636)                     24 0.005265
4 ETW000 [     dev trc,00000]    (0.007) Calculated record length for INSERT corrected (note 1897636)
4 ETW000                                                                                                  27 0.005292
4 ETW000 [     dev trc,00000]                                                                            15 0.005307
4 ETW000 [     dev trc,00000]   -> init()                                                                21 0.005328
4 ETW000 [     dev trc,00000]    STATEMENT_CACHE_SIZE = 1000                                            181 0.005509
4 ETW000 [     dev trc,00000]   -> init()                                                               505 0.006014
4 ETW000 [     dev trc,00000]   -> loadClientRuntime()                                                   27 0.006041
4 ETW000 [     dev trc,00000] Loading SQLDBC client runtime ...                                         19 0.006060
4 ETW000 [     dev trc,00000] SQLDBC Module : C:\usr\sap\CM1\hdbclient\libSQLDBCHDB.dll               779 0.006839
4 ETW000 [     dev trc,00000] SQLDBC Runtime : libSQLDBCHDB 1.00.68 Build 0384084-1510                  74 0.006913
4 ETW000 [     dev trc,00000] SQLDBC client runtime is 1.00.68.0384084                                  45 0.006958
4 ETW000 [     dev trc,00000]   -> getNewConnection()                                                    28 0.006986
4 ETW000 [     dev trc,00000]   <- getNewConnection(con_hdl=0)                                           78 0.007064
4 ETW000 [     dev trc,00000]   -> checkEnvironment(con_hdl=0)                                           34 0.007098
4 ETW000 [     dev trc,00000]   -> connect(con_info_p=0000000000000000)                                  27 0.007125
4 ETW000 [     dev trc,00000] Try to connect via secure store (DEFAULT) on connection 0 ...             62 0.007187
4 ETW000 [     dev trc,00000]   -> check_db_params(con_hdl=0)                                         61365 0.068552
4 ETW000 [     dev trc,00000] Attach to HDB : 1.00.68.384084 (NewDB100_REL)                           7595 0.076147
4 ETW000 [     dev trc,00000] Database release is HDB 1.00.68.384084                                    49 0.076196
4 ETW000 [     dev trc,00000] INFO : Database 'HDB/00' instance is running on 'hanaserver'            6867 0.083063
4 ETW000 [     dev trc,00000] INFO : Connect to DB as 'SAPCM1', connection_id=201064                 43659 0.126722
4 ETW000 [     dev trc,00000] DB max. input host variables : 32767                                   6954 0.133676
4 ETW000 [     dev trc,00000] DB max. statement length      : 1048576                                   34 0.133710
4 ETW000 [     dev trc,00000] DB max. array size            : 100000                                    75 0.133785
4 ETW000 [     dev trc,00000] use decimal precision as length                                           21 0.133806
4 ETW000 [     dev trc,00000] ABAPVARCHARMODE is used                                                   19 0.133825
4 ETW000 [     dev trc,00000] INFO : DBSL buffer size = 1048576                                         20 0.133845
4 ETW000 [     dev trc,00000] Command info enabled                                                      19 0.133864
4 ETW000 [     dev trc,00000] Now I'm connected to HDB                                                  18 0.133882
4 ETW000 [     dev trc,00000] 00: hanaserver-HDB/00, since=20140602134916, ABAP= <unknown> (0)          30 0.133912
4 ETW000 [     dev trc,00000] } DbSlHDBConnect(rc=0)                                                    18 0.133930
4 ETW000 [     dev trc,00000] { DbSlHDBControl(con_hdl=0,command=30,arg_p=0000000000000000)             24 0.133954
4 ETW000 [     dev trc,00000] } DbSlHDBControl(rc=0)                                                    18 0.133972
4 ETW000 [     dev trc,00000] { DbSlHDBControl(con_hdl=0,command=21,arg_p=000000000205F460)             22 0.133994
4 ETW000 [     dev trc,00000] } DbSlHDBControl(rc=0)                                                    18 0.134012
4 ETW000 [     dev trc,00000] Connection 0 opened (DBSL handle 0)                                       36 0.134048
4 ETW000 [     dev trc,00000] { DbSlHDBControl(con_hdl=0,command=7,arg_p=000000000205F4B0)              25 0.134073
4 ETW000 [     dev trc,00000] } DbSlHDBControl(rc=0)                                                    17 0.134090
4 ETW000 [     dev trc,00000] { DbSlHDBControl(con_hdl=0,command=63,arg_p=000000000205F2B0)             23 0.134113
4 ETW000 [     dev trc,00000] } DbSlHDBControl(rc=0)                                                    18 0.134131
4 ETW000 [     dev trc,00000] { DbSlHDBControl(con_hdl=0,command=21,arg_p=000000000205F300)          12214 0.146345
4 ETW000 [     dev trc,00000] } DbSlHDBControl(rc=0)                                                    32 0.146377
4 ETW000 [     dev trc,00000] { DbSlHDBControl(con_hdl=0,command=11,arg_p=000000000205F420)             26 0.146403
4 ETW000 [     dev trc,00000] } DbSlHDBControl(rc=0)                                                    18 0.146421
4 ETW000 [     dev trc,00000] { DbSlHDBControl(con_hdl=0,command=22,arg_p=000000000205F390)             23 0.146444
4 ETW000 [     dev trc,00000] } DbSlHDBControl(rc=0)                                                    37 0.146481
4 ETW000 [     dev trc,00000] { DbSlHDBControl(con_hdl=0,command=13,arg_p=000000000205F260)             29 0.146510
4 ETW000 [     dev trc,00000] } DbSlHDBControl(rc=0)                                                    18 0.146528
4 ETW000 [     dev trc,00000] { DbSlHDBControl(con_hdl=0,command=24,arg_p=000000000205F210)             37 0.146565
4 ETW000 [     dev trc,00000] } DbSlHDBControl(rc=0)                                                    35 0.146600
4 ETW000 [     dev trc,00000] { DbSlHDBControl(con_hdl=0,command=51,arg_p=000000000205F200)             40 0.146640
4 ETW000 [     dev trc,00000] } DbSlHDBControl(rc=15)                                                   31 0.146671
4 ETW000 [     dev trc,00000] { DbSlHDBPrepare(con_hdl=0,ss_p=000000000205F4E0,op=3,da_p=000000000205F540)
4 ETW000                                                                                                  46 0.146717
4 ETW000 [     dev trc,00000]   -> buildSQLStmt(stmt_p=000000000205F4B0,da_p=000000000205F540,for_explain=0,lock=0,op=3)
4 ETW000                                                                                                  89 0.146806
4 ETW000 [     dev trc,00000]   <- buildSQLStmt(len=27,op=3,#marker=0,#lob=0)                            33 0.146839
4 ETW000 [     dev trc,00000]   -> stmt_prepare(sc_hdl=0000000003AEAC40,ss_p=000000000205F4E0)           75 0.146914
4 ETW000 [     dev trc,00000] sc_p=0000000003AEAC40,no=0,idc_p=0000000000000000,con=0,act=0,slen=27,smax=256,#vars=0,stmt=000000000AD913E0,table=SVERS
4 ETW000                                                                                                  46 0.146960
4 ETW000 [     dev trc,00000] SELECT VERSION FROM SVERS ;                                              23 0.146983
4 ETW000 [     dev trc,00000]    CURSOR C_0000 PREPARE on connection 0                                   21 0.147004
4 ETW000 [     dev trc,00000] } DbSlHDBPrepare(rc=0)                                                  6174 0.153178
4 ETW000 [     dev trc,00000] { DbSlHDBRead(con_hdl=0,ss_p=000000000205F4E0,da_p=000000000205F540)
4 ETW000                                                                                                  53 0.153231
4 ETW000 [     dev trc,00000]   ABAP USER is not set                                                     25 0.153256
4 ETW000 [     dev trc,00000]   -> activate_stmt(sc_hdl=0000000003AEAC40,da_p=000000000205F540)          25 0.153281
4 ETW000 [     dev trc,00000]   -> bind_variables(sc_hdl=0000000003AEAC40,in_out=0,bulk=0,da_p=000000000205F540)
4 ETW000                                                                                                  30 0.153311
4 ETW000 [     dev trc,00000]   -> allocParameter(in_out=0,col_cnt=0)                                    21 0.153332
4 ETW000 [     dev trc,00000]   -> calculate_record_length(sc_hdl=0000000003AEAC40,in_out=0,bulk=0,types=0000000000000000,#col=0,useBulkInsertWithLobs=0)
4 ETW000                                                                                                  54 0.153386
4 ETW000 [     dev trc,00000]      #float=0,#lob=0,itab=0,#short=0,#int=0,#llong=0,#uc=0,rec_lng=0,db_lng=0
4 ETW000                                                                                                  33 0.153419
4 ETW000 [     dev trc,00000]   <- calculate_record_length(row_size=0, lob_cnt=0, lob_pw_cnt=0, long_cnt=0, ins_bulk_lob=0, row_max=1)
4 ETW000                                                                                                  33 0.153452
4 ETW000 [     dev trc,00000]   -> exec_modify(sc_hdl=0000000003AEAC40,ss_p=000000000205F4E0,bulk=0,in_out=1,da_p=000000000205F540)
4 ETW000                                                                                                  36 0.153488
4 ETW000 [     dev trc,00000]   -> stmt_execute(sc_hdl=0000000003AEAC40,ss_p=000000000205F4E0,in_out=1,da_p=000000000205F540)
4 ETW000                                                                                                  95 0.153583
4 ETW000 [     dev trc,00000]    OPEN CURSOR C_0000 on connection 0                                      28 0.153611
4 ETW000 [     dev trc,00000]    CURSOR C_0000 SET InputSize=1                                           23 0.153634
4 ETW000 [     dev trc,00000]    CURSOR C_0000 EXECUTE on connection 0                                   22 0.153656
4 ETW000 [     dev trc,00000]    execute() of C_0000, #rec=0, rcSQL=0, rc=0                            6404 0.160060
4 ETW000 [     dev trc,00000]    CURSOR C_0000, rc=0,#rec=0,#dbcount=0                                   36 0.160096
4 ETW000 [     dev trc,00000]   -> bind_variables(sc_hdl=0000000003AEAC40,in_out=1,bulk=0,da_p=000000000205F540)
4 ETW000                                                                                                  33 0.160129
4 ETW000 [     dev trc,00000]   -> allocParameter(in_out=1,col_cnt=1)                                    21 0.160150
4 ETW000 [     dev trc,00000]   -> calculate_record_length(sc_hdl=0000000003AEAC40,in_out=1,bulk=0,types=000000000205F518,#col=1,useBulkInsertWithLobs=0)
4 ETW000                                                                                                  37 0.160187
4 ETW000 [     dev trc,00000]      #float=0,#lob=0,itab=0,#short=0,#int=0,#llong=0,#uc=72,rec_lng=144,db_lng=144
4 ETW000                                                                                                  31 0.160218
4 ETW000 [     dev trc,00000]   <- calculate_record_length(row_size=144, lob_cnt=0, lob_pw_cnt=0, long_cnt=0, ins_bulk_lob=0, row_max=1)
4 ETW000                                                                                                  31 0.160249
4 ETW000 [     dev trc,00000]   -> allocIndicator(in_out=1,row_cnt=1)                                    21 0.160270
4 ETW000 [     dev trc,00000]   -> allocData(in_out=1,size=1048576)                                      21 0.160291
4 ETW000 [     dev trc,00000]   -> bind_type_and_length(sc_hdl=0000000003AEAC40,in_out=1,bulk=0,arr_size=1,types=000000000205F518,da_p=000000000205F540)
4 ETW000                                                                                                  45 0.160336
4 ETW000 [     dev trc,00000]   -> exec_fetch(sc_hdl=0000000003AEAC40,bulk=0,da_p=000000000205F540)
4 ETW000                                                                                                  41 0.160377
4 ETW000 [     dev trc,00000]      xcnt=1,row_i=0,row_pcnt=0                                             20 0.160397
4 ETW000 [     dev trc,00000]   -> stmt_fetch(sc_hdl=0000000003AEAC40)                                   20 0.160417
4 ETW000 [     dev trc,00000]    CURSOR C_0000 FETCH (xcnt=1) on connection 0                            23 0.160440
4 ETW000 [     dev trc,00000]    next() of C_0000, rc=0                                                  27 0.160467
4 ETW000 [     dev trc,00000]    fetch() of C_0000, #rec=1, rc=0, rcSQL=0                                28 0.160495
4 ETW000 [     dev trc,00000]   -> deactivate_stmt(sc_hdl=0000000003AEAC40,da_p=000000000205F540,rc=0)
4 ETW000                                                                                                  91 0.160586
4 ETW000 [     dev trc,00000]   -> StmtCacheFree(DBSL:C_0000)                                            24 0.160610
4 ETW000 [     dev trc,00000]    CURSOR C_0000 CLOSE resultset on connection 0                           20 0.160630
4 ETW000 [     dev trc,00000] } DbSlHDBRead(rc=0)                                                       34 0.160664
4 ETW000 [     dev trc,00000] { DbSlHDBControl(con_hdl=0,command=43,arg_p=00000001400FAB06)             25 0.160689
4 ETW000 [     dev trc,00000] INFO : SAP RELEASE (DB) = 740                                             19 0.160708
4 ETW000 [     dev trc,00000] } DbSlHDBControl(rc=0)                                                    16 0.160724
4 ETW000 [     dev trc,00000] { DbSlHDBControl(con_hdl=0,command=41,arg_p=00000001400FAB98)             49 0.160773
4 ETW000 [     dev trc,00000] } DbSlHDBControl(rc=0)                                                    19 0.160792
4 ETW000 [     dev trc,00000] { DbSlHDBControl(con_hdl=0,command=14,arg_p=0000000002055888)             22 0.160814
4 ETW000 [     dev trc,00000] } DbSlHDBControl(rc=0)                                                    18 0.160832
4 ETW000 [     dev trc,00000] { DbSlHDBControl(con_hdl=0,command=50,arg_p=0000000002055880)             22 0.160854
4 ETW000 [     dev trc,00000] } DbSlHDBControl(rc=0)                                                    26 0.160880
4 ETW000 [     dev trc,00000] { DbSlHDBControl(con_hdl=0,command=52,arg_p=00000000020558F0)             23 0.160903
4 ETW000 [     dev trc,00000] } DbSlHDBControl(rc=0)                                                    17 0.160920
4 ETW000 [     dev trc,00000] { DbSlHDBControl(con_hdl=0,command=20,arg_p=0000000141FC74F0)             99 0.161019
4 ETW000 [     dev trc,00000] INFO : STMT SIZE = 1048576                                                21 0.161040
4 ETW000 [     dev trc,00000] INFO : MARKER_CNT = 32767                                                 18 0.161058
4 ETW000 [     dev trc,00000] } DbSlHDBControl(rc=0)                                                    19 0.161077
4 ETW000 [     dev trc,00000] NTAB: SELECT COMPCNT, UNICODELG FROM DDNTT WHERE TABNAME = 'SVERS'...
4 ETW000                                                                                                  38 0.161115
4 ETW000 [     dev trc,00000] { DbSlHDBPrepare(con_hdl=0,ss_p=0000000002055160,op=3,da_p=00000000020551B0)
4 ETW000                                                                                                  31 0.161146
4 ETW000 [     dev trc,00000]   -> buildSQLStmt(stmt_p=0000000002055180,da_p=00000000020551B0,for_explain=0,lock=0,op=3)
4 ETW000                                                                                                  32 0.161178
4 ETW000 [     dev trc,00000]   <- buildSQLStmt(len=63,op=3,#marker=0,#lob=0)                            23 0.161201
4 ETW000 [     dev trc,00000]   -> stmt_prepare(sc_hdl=0000000003AEACD8,ss_p=0000000002055160)           38 0.161239
4 ETW000 [     dev trc,00000] sc_p=0000000003AEACD8,no=1,idc_p=0000000000000000,con=0,act=0,slen=63,smax=256,#vars=0,stmt=000000000AE09690,table=DDNTT
4 ETW000                                                                                                  38 0.161277
4 ETW000 [     dev trc,00000] SELECT COMPCNT, UNICODELG FROM "DDNTT" WHERE TABNAME = 'SVERS' ;          21 0.161298
4 ETW000 [     dev trc,00000]    CURSOR C_0001 PREPARE on connection 0                                   19 0.161317
4 ETW000 [     dev trc,00000] } DbSlHDBPrepare(rc=0)                                                  6453 0.167770
4 ETW000 [     dev trc,00000] db_con_test_and_open: 1 open cursors (delta=1)                            30 0.167800
4 ETW000 [     dev trc,00000] db_con_check_dirty: 1 open cursors, tx = NO , bc = NO                     18 0.167818
4 ETW000 [     dev trc,00000] db_con_check_dirty: db_con_dirty = YES                                    16 0.167834
4 ETW000 [     dev trc,00000] { DbSlHDBBegRead(con_hdl=0,ss_p=0000000002055160,da_p=00000000020551B0)
4 ETW000                                                                                                  35 0.167869
4 ETW000 [     dev trc,00000]   ABAP USER is not set                                                     23 0.167892
4 ETW000 [     dev trc,00000]   -> activate_stmt(sc_hdl=0000000003AEACD8,da_p=00000000020551B0)          23 0.167915
4 ETW000 [     dev trc,00000]   -> bind_variables(sc_hdl=0000000003AEACD8,in_out=0,bulk=0,da_p=00000000020551B0)
4 ETW000                                                                                                  32 0.167947
4 ETW000 [     dev trc,00000]   -> allocParameter(in_out=0,col_cnt=0)                                    23 0.167970
4 ETW000 [     dev trc,00000]   -> calculate_record_length(sc_hdl=0000000003AEACD8,in_out=0,bulk=0,types=0000000000000000,#col=0,useBulkInsertWithLobs=0)
4 ETW000                                                                                                  34 0.168004
4 ETW000 [     dev trc,00000]      #float=0,#lob=0,itab=0,#short=0,#int=0,#llong=0,#uc=0,rec_lng=0,db_lng=0
4 ETW000                                                                                                  30 0.168034
4 ETW000 [     dev trc,00000]   <- calculate_record_length(row_size=0, lob_cnt=0, lob_pw_cnt=0, long_cnt=0, ins_bulk_lob=0, row_max=1)
4 ETW000                                                                                                  31 0.168065
4 ETW000 [     dev trc,00000]   -> exec_modify(sc_hdl=0000000003AEACD8,ss_p=0000000002055160,bulk=0,in_out=1,da_p=00000000020551B0)
4 ETW000                                                                                                  32 0.168097
4 ETW000 [     dev trc,00000]   -> stmt_execute(sc_hdl=0000000003AEACD8,ss_p=0000000002055160,in_out=1,da_p=00000000020551B0)
4 ETW000                                                                                                  32 0.168129
4 ETW000 [     dev trc,00000]    OPEN CURSOR C_0001 on connection 0                                      20 0.168149
4 ETW000 [     dev trc,00000]    CURSOR C_0001 SET InputSize=1                                           19 0.168168
4 ETW000 [     dev trc,00000]    CURSOR C_0001 EXECUTE on connection 0                                   20 0.168188
4 ETW000 [     dev trc,00000]    execute() of C_0001, #rec=0, rcSQL=0, rc=0                            5712 0.173900
4 ETW000 [     dev trc,00000]    CURSOR C_0001, rc=0,#rec=0,#dbcount=0                                   34 0.173934
4 ETW000 [     dev trc,00000]   -> bind_variables(sc_hdl=0000000003AEACD8,in_out=1,bulk=1,da_p=00000000020551B0)
4 ETW000                                                                                                  32 0.173966
4 ETW000 [     dev trc,00000]   -> allocParameter(in_out=1,col_cnt=2)                                    21 0.173987
4 ETW000 [     dev trc,00000]   -> calculate_record_length(sc_hdl=0000000003AEACD8,in_out=1,bulk=1,types=0000000002055240,#col=2,useBulkInsertWithLobs=0)
4 ETW000                                                                                                  34 0.174021
4 ETW000 [     dev trc,00000]      #float=0,#lob=0,itab=0,#short=2,#int=0,#llong=0,#uc=0,rec_lng=16,db_lng=4
4 ETW000                                                                                                  30 0.174051
4 ETW000 [     dev trc,00000]   <- calculate_record_length(row_size=16, lob_cnt=0, lob_pw_cnt=0, long_cnt=0, ins_bulk_lob=0, row_max=65536)
4 ETW000                                                                                                  32 0.174083
4 ETW000 [     dev trc,00000]   -> allocIndicator(in_out=1,row_cnt=65536)                                20 0.174103
4 ETW000 [     dev trc,00000]   -> allocData(in_out=1,size=1048576)                                      30 0.174133
4 ETW000 [     dev trc,00000]   -> bind_type_and_length(sc_hdl=0000000003AEACD8,in_out=1,bulk=1,arr_size=65536,types=0000000002055240,da_p=00000000020551B0)
4 ETW000                                                                                                  36 0.174169
4 ETW000 [     dev trc,00000] } DbSlHDBBegRead(rc=0)                                                    24 0.174193
4 ETW000 [     dev trc,00000] { DbSlHDBExeRead(con_hdl=0,ss_p=0000000002055160,da_p=00000000020551B0)
4 ETW000                                                                                                  35 0.174228
4 ETW000 [     dev trc,00000]   ABAP USER is not set                                                     20 0.174248
4 ETW000 [     dev trc,00000]   -> exec_fetch(sc_hdl=0000000003AEACD8,bulk=0,da_p=00000000020551B0)
4 ETW000                                                                                                  33 0.174281
4 ETW000 [     dev trc,00000]      xcnt=1,row_i=0,row_pcnt=0                                             20 0.174301
4 ETW000 [     dev trc,00000]   -> stmt_fetch(sc_hdl=0000000003AEACD8)                                   20 0.174321
4 ETW000 [     dev trc,00000]    CURSOR C_0001 FETCH (xcnt=1) on connection 0                            20 0.174341
4 ETW000&

Hi,
Could you check for SAP Note 1952701 - DBSL supports new HANA version number
Regards,
Gaurav

HT4314 My iPad was erased and all I cannot connect back to Game Center, it says that my Apple ID has not been used in Game Center. Can I recover my Game Center sessions just by my nickname?

My iPad was erased and when I try to connect back to game center it tells me that it has not been used in Game Center before when I used to have a Game Center nickname and played a lot. Looks like somehow my Apple ID and my Game Center Nickname have been disconnect.
Is there a way to find out what Apple ID is associated to a Game Center Nickname??

Mine did the exact same thing last week.
I did the software update and then the restore and it only restored photos, emails, and iPad settings. It did not restore apps and now my apple ID is no longer associated with my game center ID and I can't figure out how to reconnect them. Any help would be appreciated.
Thank you.

After a rescent update on my ipad 3 Ican no longer connect to my pc with WIFI. I have tried resetting ipad and itunes but nothing works. Talked to support and they were no help. Any suggestions?

After a rescent update on my ipad 3 I can no longer connect to my pc with WIFI. I have tried resetting ipad and itunes but nothing works. Talked to support and they were no help. Any suggestions?

What error do you get if any?
Have you tried connecting to another network besides your own?
Do you use DHCP on your router or static IP address?

VWIC2-1MFT-T1/E1 support to connect back to back with VWIC3-1MFT-T1/E1

Similar Messages

Maybe you are looking for