W530 display brigtness changes

Have recently updated to new nivdia drivers (from nvidia website 605.93) and intel drivers from Windows Update.
Now I'm seeing the brightness of the screen nearly constantly changing, not by a huge amount, but it seems to be going up and down.
Any ideas please?
Solved!
Go to Solution.

I had the same issue. It is terribly annoying. I found this on a Google search and it solved the issue for me:
open intel control center, click on intel HD graphics on the right hand side, in the silly blue window go to "power" on the left side, then click "power source", change to "battery", and down below in "power conservation features" you'll find the culprit. It's called "display power saving technology". Un-check it and click apply. Your display will "normalize" itself if you do it on battery. On AC you won't notice anything.

Similar Messages

Master-detail: detail field not displayed after changed by master field

I want to use the Depends on item with Clear/refresh value functionality in a master detail situation. Within the same group it is no problem to use the setter method of a field to change a second field and then displaying this new value. But in the detail group, I can not select items from the master group as a depends on item.
In the setter of the master field, the value in a field for each row in the detail (table layout) is updated. The only problem is that this updated value is not displayed, the old value doesn't change. When saving the changes, the displayed value is committed to the database. When de updated field is not displayed at all, the correct value is saved, so I know the detail field is updated.
How can I make sure the displayed value in the detail is displayed after changeing a master field? I already gave the detail field the correct partial trigger.

Wouter,
I guese you don;t see the changed value when you display the detail item because after the depends on item update changed the detail item, JSF procesing continues and the detail table changes are sent to the server which will override again the detail item attriibute, resetting it to the old, still displayed value.
So, the trick is to get PPR working. Make sure the partialTYriggers property of the detail item is set to the value of the id property of the master item. If it still doesn't work, try setting the partial triggers property on the table, instead of the individual item.
Steven Davelaar,
JHeadstart team

Windows 7 or Windows Server 2008 R2 domain join displays error "Changing the Primary Domain DNS name of this computer to "" failed...."

Hi,
Windows 7 or Windows Server 2008 R2 domain join displays error "Changing the Primary Domain DNS name of this computer to "" failed...."
DC:windows Server 2008 R2
Domain functional level:Windows Server 2003
When Winxp join domain, have no this error message.
I checked http://support.microsoft.com/kb/2018583?wa=wsignin1.0 does't work.
There have 3 suggestion in this article:
1.The "Disable NetBIOS over TCP/IP" checkbox has been disabled in the IPv4 properties of the computer being joined.
Doesnt's work.
2.Connectivity over UDP port 137 is blocked between client and the helper DC servicing the join operation in the target domain.
On my DC, I run netstat -an, reslut as below:
UDP 192.168.20.3:137 *:*
3.The TCP/IPv4 protocol has been disabled so that the client being joined or the DC in the destination domain targeted by the LDAP BIND is running TCP/IPv6 only.
We are not using IPV6.
This server recently updated from Windows Server 2003 to Windows Server 2008 R2. Before upgrade, when Win7 and Win2008 join this domain, also have the same error message.
Please help to check this issue.
Thank you very much.
BR
Guo YingHui

Hi Guo Ying,
I have faced this critical error which makes over-writes the host names in the domain when you join.
For example: Already you had a host name called as PC.domain.com in the domain.com Domain.
When you try to add the another host name called as PC in the domain.com Domain, it doesn't give you the duplicate name error on the network it does over-write the existing host name called as PC.domain.com & it will add the new host name into the domain.
Host name which got over-written will get removed from the domain. I faced this issue in my project. My DPM host name got removed from the Domain & new host name got joined into the domain which halted my backups for one day.
Final Resolution is as follows:
You need to start the dns console on the DC & drop down the domain name.
Select the _msdcs when you click on _msdcs it will show the Name Server's list on the right hand side.
You need to add the Domain Naming Master under the _msdcs or add all the domain controllers which you had.
After you add the Name server's try joining the PC OR Laptop to the domain which is successfully joins it.
Regards
Anand S
Thanks & Regards Anand Sunka MCSA+CCNA+MCTS

External display resolution changes after returning from display sleep

I often use an external display as a second screen with my Macbook Pro (OS X 10.8.2) However, when I return to the computer after the display has gone to sleep, the external display resolution changes when the display reappears. Then I have to go into System Preferences > Display and "Detect Displays" in order to return the external display to the proper resolution.
Does anybody know of a way for me to avoid having to do this every time my display sleeps?
Thank you,
Adam

I have the exact same problem.
I found the key combination ⌘ alt F2 also restores the proper resolution on both displays, however it's still a bit annoying

My display keeps changing to 800x600 after upgrade to 10.8.3

After upgrading to 10.8.3 my display keeps changing to 800x600 after it wakes up from sleep. I have to go to preferences and set again, and it works. It is quite annoying. Any clue.

Not much to go on.
What monitor and connection method are you using with the mac Mini..?
Have you tried resetting the > NVRAM and PRAM
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys.

How can I display a changing variable in a subvi on the front panel of the main vi as the subvi is excuting

In the document attached the vi on the right is sub to the vi on the left. On the subvi on the right the variable "Field Reading" is continuously updated on the front panel of the subvi as the "for" loop is executed, but only the last value of the variable is updated on the main vi front panel which is what is expected. My question is how can I display the changing value of "Field Reading" on the main vi front panel as the "for" loop in the subvi is running?
Thank you.
Solved!
Go to Solution.
Attachments:
Doc2.docx ‏554 KB

Hopefully I can explain it well enough. It really is simple.
1) Create an empty global variable and call it something like User Interface References.vi
2) For each and every control and indicator on your front panel, right-click and select Create/Reference
3) Place these references wherever you like (I use a series of Event cases to perform my initialisation and these all live in one of these event cases). They can be placed anywhere in the main vi.
4) For each of the references, right-click and select Create/Indicator
5) Moving to the front panel, Cut all the indicators and Paste them in the global variable (eg. User Interface References.vi)
6) Moving back to the block diagram, wire the global variable to each of the references and select the same named global variable.
All the hard work is now done (until you add another user interface terminal). You should now have something that look as shown below, [except the reference labels would be to the left (not sure why the snippet put them above)]. In my latest program I have 82 references!
Done. You can now access all your front panel controls and indicators anywhere in your program as shown below.
You can just select Value in most cases, but in this particular case I wanted to fire off an Event to do some things (log the alarm) as well as just update the value. So, this is another bonus with the method.
Hopefully this all makes sense. If not, let me know.

System hanging when i try to display or change or create a function module?

Hi Experts,
My system is hanging when i try to display or change or create a FM using SE37 transaction. I am able to execute SE37 transaction but when i give a FM name which is already existing, the system is getting hanged up. If i give a FM which is not present in the system and try to display it, it gives an error "FM does not exists". I have unistalled the SAP logon and reinstalled it again and restarted my system but still this problem is encountered.
Can any one please help me in this issue??
Thanks a lot in Advance!
Regards,
Lakshman.

Hi Prasad,
Go to se38 transaction and look at UTILITIES-> Settings-> ABAP editor-> Change front-end editor to old(if it is new) and check once. Hope this solves your problem becuase this is what i have done for my problem and let me know whether the problem has been solved.
Regards,
Lakshman.
Edited by: lakshman reddy G on Mar 5, 2009 5:54 PM

Can't display archive change documents for agreement (COND_B)

Hello,
I want to display archive change document for object class : COND_B (agreement) via transaction MEB3:
The archive works fine, and I can found the archive change documents form SARA.
(Archive Objetc = CHANGEDOCU
Archive info structure = SAP_CHANGEDOCU2 (is active))
But the display from the application transaction : MEB3 doesn't work.
In the DEBUG:
the Function module is called automatiquely: COND_B_DISPLAY_DOCUMENT
THEN SUBMIT RSSCD100
THEN The function module is called with the no parameter READ_CHANGEDOCU (ie with space value)
THEN the program reads only from DB
Question : HOW I oblige the program to read from the archive (READ_CHANGEDOCU = 'X') ?
I checked these SAP notes 1050935,1299903, 1308024, 1128954, 1050335
but no results.
May be I forgot some customizing ( SARA,, AOBJ )?
Thanks for your help.

Hi,
As I understand, the change documents archived using the CHANGEDOCU archiving object are no longer available using the application object.
Refer to Notes 1257133 and 140255 where they mention the above point.
If you want to read change documents along with the application, then you must first archive the change documents along with the application.
In your case, for agreements, you should use object SD_AGREEM so that the change documents also gets archived along with the agreements. Refer to note 761281 to check whether the archiving class CHANGEDOCU is already defined along with object SD_AGREEM in your system.
Hope this helps,
Naveen

Display resolution changes during sleep

This does not look quite like anything I've seen here already. Mid-2010 Mac Mini, OS X 10.9.2, Acer V173 monitor with 1280 x 1024 maximum resolution, connected via Apple Mini DisplayPort to VGA adapter (because the monitor has only a VGA input). Resolution is set at 1280 x 1024. I have Display Menu installed and the icon sits at the top in the menu bar.
Display goes to sleep when there is no user activity for a few minutes (because although the display doesn't use much power it's still against my nature to waste any). I wake it up by hitting a non-printing key such as control, option, command, or all three together. Often as not, the display wakes up in a lower resolution. I can usually restore it to 1280 x 1024 by using Display Menu, but then I also have to resize some of the windows that have been shrunk by the lower resolution.
I don't want the display resolution to change. I tried resetting NVRAM and repairing file permissions, no help.
Why does the display resolution change without my knowledge and consent? More to the point, how can I keep it from doing that?

Another helpful hint, again I forget where on this discussion board I saw it, is that holding down the Option key while hitting the Scaled button in Display Preferences gives a wider choice of resolutions. Ordinarily the only resolution option is 1280x1024, but the Option key brings up others, including 1280x960.
On the theory that Apple doesn't like the 5:4 aspect ratio of the native 1280x1024 resolution of the monitor, I set the monitor resolution to 1280x960 yesterday (June 23). There's a little distortion from using a 4:3 aspect ratio on a physically 5:4 monitor, but if two weeks go by (July 7) without the resolution going bad, I will try a new (or used) monitor.
The next question is, would Apple dislike a wide screen aspect ratio? If it likes 16:9, would it dislike 16:10? With my hardware and OS, and a 1080p HDTV/monitor connected with an HDMI cable, would the resolution stay put?

X230 display brightness changes automatically

Hi,
I have a problem when I'm using my X230 from battery: every know and then the display brightness changes, it gets lower (even without any user activity). Also it seems that the color profile also changes, colors look washed out. After few minutes or sometimes seconds, it goes back to normal. However, I have this issue quite often.
Is there a solution? Is it something to do with my power settings?
Thank you.
Solved!
Go to Solution.

zombyorc,
Try the following.
http://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/Disabling-Auto-Screen-brightness-on-Intel-HD-G...
or
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T410-screen-brightness-dims-washes-out-on-b...
*Non Lenovo employee*
I have a Y2P (i5) ... Feel free to ping me if you want me to test some applications with your Y2P if you have the same model. I don't mind keep doing recovery on it if needed .... =)

Display of change documents: Material BOM

Hi,
Using transaction CS80, I wish to display the changes made to a material BOM. However I could not see any output although I know I have made quite a lot of changes to that material BOM.
Am I missing some config or data set-up??
Thanks in advance for your help!!
Regards,
Ragavan

1.Go to the Transaction CS80.
2.Give the required mateiral /plant etc
3.Enter
4.You will find 2 options a.documentovervew b.full
5. select full
6. You can see the complete thigns..
if still the problem is there reply back
thanks

Display mysteriously changed... not a zoom problem.

I opened up my computer and the font and display had changed. Now things like webpages don't fit in the screen. Even the desktop picture has changed. It isn't zoom and I've checked the display resolutions. Anyone know how to correct this problem?

Did you try holding down CNTL while you scroll down with the mouse or trackpad.
This can zoom the screen even when the System Preferences > Universal Access shows zoom off.
Regards,
Captfred

Display suddenly changed I have tried changing in utilities but nothing works. The print is enormous and out of focus the screen has shrunk in width but programs open too stretched in length? What can I do?

The display suddently changed two days ago. Everthing exploded in size. I have tried changing the contrast but nothing works. The display screen becomes either too wide, too long, or too narrow and in all cases the font is extra large and out of focus. What can I do please I am really disappointed since my iMac is only 2.5 months old.

Don't think so. But tried it anyway. I have been into utilities and tried different contrast settings now I don't know what is the right one. But no matter which one I tried I have either about a third of the screen black, with display centered as though hidden behind the black. What is going on?
Also, I have to say that I can't understand why there is no information anywhere on what the correct settings should be.
Any ideas Capt?

Satellite U200 with Win XP - Display device change utility is not working

Hi there,
I reckon there's nothing wrong with his installation since I experience the same problem.
Fresh install of win XP on a U200 satellite Pro.
WXP updated to sp3 straight away. Then downloaded all drivers baseD en serial number from toshiba website, then installed them in the same order as advised on the installation list but I get the same error installation message as sjoemie1 when I tried to install "hotkey for display device" etc.
ANYONE KNOW HOW TO REINSTALL THOSE TWO FILES?

Hi
The Common Modules v6.05.00 for Win XP needs to be installed firstly.
Furthermore there are two tools called
*Hotkey Utilities for Display Devices v3.4.4.1-XP*
and
*Display Device Change v2.3.0.0*
Both software part allows you to switch the display device from LCD to LCD+CRT or CRT mode by pressing Fn+F5
So if you have any problems installing the first utility, forget this and try the second one.

Display color changes when I start some applications.

Hello.
Today I reinstalled OSX 10.8.1.
All applications are up2date.
But some applications like iPhoto have a strange behavior. When I start them, the display color changes. It looks like it has a blue fog.
As soon as I close the application it's back to normal. Only happens for a few applications.
In the console I see the following entires when I start the application and the display changes:
11.09.12 23:06:22,777 WindowServer[86]: Received display connect changed for display 0x42728c0
11.09.12 23:06:22,806 WindowServer[86]: Received display connect changed for display 0x3f003d
11.09.12 23:06:22,806 WindowServer[86]: Received display connect changed for display 0x3f003e
11.09.12 23:06:22,808 WindowServer[86]: CGXMuxAcknowledge: Posting glitchless acknowledge
11.09.12 23:06:22,809 SystemUIServer[7841]: DisplayReconfigurationCallback
11.09.12 23:06:22,809 SystemUIServer[7841]: DisplayReconfigurationCallback
11.09.12 23:06:22,809 SystemUIServer[7841]: DisplayReconfigurationCallback
11.09.12 23:06:22,810 SystemUIServer[7841]: DisplayReconfigurationCallback
11.09.12 23:06:22,813 WindowServer[86]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042728c0 device: 0x10eb0f320 isBackBuffered: 1 numComp: 3 numDisp: 3
11.09.12 23:06:22,847 WindowServer[86]: Received display connect changed for display 0x42728c0
When I close the app I see:
11.09.12 23:06:48,405 WindowServer[86]: CGXSetWindowListAlpha: Invalid window 0
11.09.12 23:06:49,406 Dock[4503]: CGSReleaseWindowList: called with 7 invalid window(s)
11.09.12 23:06:49,885 com.apple.ShareKitHelper[569]: --warning: [ShareKit-XPC] Received XPC_ERROR_CONNECTION_INVALID
11.09.12 23:06:49,885 com.apple.ShareKitHelper[569]: --warning: [ShareKit-XPC] connectionWithClientInterrupted
11.09.12 23:06:49,885 com.apple.ShareKitHelper[569]: --warning: [ShareKit] Cancel UI for running services with Client PID: 8433
11.09.12 23:06:49,915 WindowServer[86]: Received display connect changed for display 0x42728c0
11.09.12 23:06:49,960 WindowServer[86]: CGXMuxAcknowledge: Posting glitchless acknowledge
11.09.12 23:06:49,961 SystemUIServer[7841]: DisplayReconfigurationCallback
11.09.12 23:06:49,962 SystemUIServer[7841]: DisplayReconfigurationCallback
11.09.12 23:06:49,962 SystemUIServer[7841]: DisplayReconfigurationCallback
11.09.12 23:06:49,962 SystemUIServer[7841]: DisplayReconfigurationCallback
11.09.12 23:06:49,973 WindowServer[86]: Received display connect changed for display 0x42728c0
11.09.12 23:06:49,974 WindowServer[86]: Received display connect changed for display 0x3f003d
11.09.12 23:06:49,974 WindowServer[86]: Received display connect changed for display 0x3f003e
Any idea what the problem might be?
Thanks
Dan

I had the same problem early on in Mountain Lion - whenever an application kicked in that used the discrete GPU, the screen would get a bluish tint. I 'resolved' the situation by using Cody Krieger's gfxCardStatus and kept the mode on Integrated Only. This, of course, slowed down some applications but, by and large, I was able to live with it. Then one day - just out of the 'blue' - I decided to switch back to Dynamic Switching: and, lo and behold, by blue tint was gone when the discrete GPU kicked in.
I only know how to temporarily fix the problem - you're one of about a dozen people that have reported it both here and in the Adobe Photoshop users forum. Try the gfxCardStatus 'fix' and then see if the problem doesn't rectify itself after a bit. It wasn't the 10.8.1 update that fixed my problem - it was just a week or so of running on integrated only.
Let me know if this doesn't work for you...
Clinton

W530 display brigtness changes

Similar Messages

Maybe you are looking for