WAAS management and CM

Hi guys.
We are going to install a wave-7541-k9 and a wave 294 (CM) in the central site and wave 674 in the remote locations.
I know that´s possible to assign a specific physical interface for management purposes only, but I have some questions.
We thought in this way because we are not able to route the customer´s IP within our management environment and we also don´t want to get our management IP being routed within the customer´s environment.
We own the routers in the locations. The WAAS must optimize/accelerate traffic for 2 routers in each location.
Basically the idea is to use the primary interface for production traffic and also as source for the CM connection.
Then, use the other physical interface available to configure a /30 and connect it directly to one of our CPEs which is gone be the management.
The primary interface is going to be connected to the customer´s switch and we will use WCCP for redirection.
The management interface is going to be connected directly to one of our routers.
The plan is to monitor the equipment via that directly connected link (polling made from our monitoring tools and also as source of the traps).
I want to make sure the IP chosen by CM is the production interface´s IP and not the management one.
Also the CM interfaces must be set in the same way (one for production and one for management).
If there any best practices for that situation, recomendations or anything you guys consider valid, I would appreciate
Thanks

Similar Messages

Firewall between WAAS 7341s and Central Manager.

Is there a white paper that describes having a firewall between a Central Manager and the WAAS devices it is managing? I need to know all the ports and protocals that need to be allowed through the firewall. - Thanks

Hi Jeff,
I am searchign for white paper for you but you need following ports bi-directionally open between WAAS CM and WAAS to communicate to each other.
1. TCP 8443
2. TCP 443
3. UDP 4050 - if you are using directed mode.
4. TCP 22 and 23 - If you plan to use SSH / Telnet for management.
Regards,
PS: If this answers your question, please mark this as Answered.

Webinar: Change Management and Transport in the Enterprise Portal

SAP NetWeaver Know-How Network Webinar:
Change Management and Transport in the Enterprise Portal
Wednesday 21 July 2004
11 a.m. EDT
On Wednesday 21 July, Scott Jones hosts the webinar titled Change Management and Transport in the Enterprise Portal as part of the ongoing SAP NetWeaver Know-How Network Webinar Series.
Heres how Scott describes his webinar presentation:
Change Management offers special challenges to administrators working in Enterprise Portal 6.0 SP2 environments. This talk provides recommendations and tools, and defines best practices and methods for the effective transport of Enterprise Portal content, with special attention to content dependencies, tracking, and troubleshooting. We'll also look forward to Change Management enhancements coming with Netweaver 04.
SDN invites you to post your questions to the presenter prior to the webinar and continue the online discussion afterward.
How to Participate
(Please go to the SDN Events page to see the article and download the PDF presentation)
Dial-in Information:
Date: Wednesday 21 July 2004
Time: 11 a.m. EDT
Within the U.S., call: +1.888.428.4473
Outside the U.S., call: +1.651.291.0618
Password: NetWeaver04
WebEx Information:
Topic: SAP NetWeaver Know-How Network
Date: Wednesday 21 July 2004
Time: 11 a.m. EDT
Meeting Number: 742391500
Meeting Password: netweaver04 (lowercase)
WebEx Link: sap.webex.com
Replay Information:
A recorded replay of this call will be available for approximately three months after the webinar. Access this recording by dialing the appropriate number and using the replay access code TBD.
Toll-free: +1.800.475.6701
International: +1.320.365.3844
About the SAP NetWeaver Know-How Webinar Series
The SAP NetWeaver Know-How Webinar Series is driven by the SAP NetWeaver Regional Implementation Group (RIG), part of the SAP Development organization. The mission of the SAP NetWeaver RIG is to enable customers, employees, and partners to successfully implement the SAP NetWeaver solution. This SAP RIG has expertise in BI, EP, XI, and WebAS. They contribute their implementation expertise to the SDN implementation forums as well as to the SAP NetWeaver Know-How Webinar Series.
Disclaimer
SDN is not responsible for any changes to the webinar schedule. The webinar schedule may be changed or cancelled without prior notice.

Hello,
In the intresting document I read that for the deployement the version number mentionned in the MANIFEST.MF is very important in a clustered evironment.
SAPnote 727180 - Version of PAR File in Manifest File
denies this.
Can you clear this out?
Kind Regards
Koen Van Loocke

I wonder to know what is the enterprise solution for windows and application event log management and analyzer

Hi
I wonder to know what is the enterprise solution for windows and application event log management and analyzer.
I have recently research and find two application that seems to be profession ,1-manageengine eventlog analyzer, 2- Solarwinds LEM(Solarwind Log & Event Manager).
I Want to know the point of view of Microsoft expert and give me their experience and solutions.
thanks in advance.

Consider MS System Center 2012.
Rgds

My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management

I have recently purchased a Mac computer (updated to Maverick) to go with my Epson Stylus Photo RX500 printer which has given excellent service with my old Windows computer. However, when trying to print pictures or photos via Photoshop Elements 11, the best results I can get are using the Colour Management and Epson Colour controls in the printing options box.
My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management, The only way I can reset the controls is to shut down the printer and computer and restart.
Could there may be a setting somewhere that I need to adjust please? I have been in touch with Epson and they say that the Epson Colour controls are part of the Photoshop Elements software but a post on the Adobe forum brought no results and I am unable to contact Adobe.
<Edited by Host>

Hello Garry. Thanks for the reply. I guess I should have used a different title from "How do I post a question?" That should come after trying to resolved the colour settings first. However, to answer your question, after experimenting with all the different settings in Photoshop Elements and Epson software, I now start with PSE11 Colour settings then click "no colour management" then after clicking Print, I choose "More Options/Colour Management/Colour Handling/Printer Manages Colour" then I choose "Page Setup/Layout/Colour Matching" which then shows Epson Colour Controls but I also choose "Layout/Colour Management" which then shows "Colour Controls/Mode" I then of course choose an Epson printer profile depending on the paper I am using. I get good results but as I said, the Colour Matching and Colour Controls are then greyed out. Hope that makes sense.

Assets management and inventory Management.

This may be simple situation often encountered in industries. The need is to manage an item as an asset as well as manage inventory functions of purchasing, receiving, physical inventory and issue of these assets to customers as inventory materials. The materials are also needed to accounted for depreciation functions.
Can experts throw some light on the kind of best practice process flows that we could often consider.
Thanks in advance for contributors.

Good questions: I think I need to explain the full scenario.
This is for a health care industry. The intention is to purchase the materials as assets and these come from different vendors, but often, it could be the same material. The current thinking is as follows:
1. Forecast the reqiuirement of the materials according the different sizes. For example : small, medium and large. Each of these sizes could come from different vendors with different model numbers, but are groupd under the sizes.
2. Based on the forecast probably using APO, the materials are purchased in ERP for these sizes. But we still need to carry the vendor model number as part of the attributes of the materisl. Here there seems to be three options.
- One is to use Material classification and use capture the model number of the vendor.
- second is to utilise the Form Fit Function functionality of SAP IS for A&D.
- Third potential option might be to use Batch management and capture manufacturer number in batch characteristic.
Once the materials are purchases these are settled to assets and then there is a need to manage their inventory as the requirement is to utilise Logistic execution functionality including sales, delivery and goods issue functionality. In addition the materials also need to be transferred between different SAP plant locations.
There is also a challenge to manage the requirement as more often, the need is for just the size. but sometime there is a requirement for a specific model within a particular size.
I am not too sure whether there is an absolute need to manage seralisation for individual material numbers, but from asset management perspective, is there a need> Pl clarify
Any comments / suggestions on the above is very welcome.
Appreciate your time and thinking and value contribution.
Venkatesh

Q&A db for warehouse management and inventory management

Hello Everybody,
i read on the help.sap website that standard as well as industry specific versions of Q&A db are available. but the website doesnt say where. i searched a lot but the links dont lead to the actual Q&A db.
i would like to request you to kindly share the Q&A db for inventory management and warehouse management with me as i need it for preparing the AS IS documentation.(preferably automotive industry but if not then even standard Q&A db is fine).
thanks a lot.
sapman.

Now QADB will not help to map the clinets requirement. Instead of QADB get AS IS information form Coreusers... thats best practice now....
Go through www.sap-img.com for further details...
Edited by: Ganti on Jul 26, 2008 7:26 AM

When closing my Firefox window, all processes are not closing requiring me to open task manager and kill the process before using Firefox again. Received recent upgrade and hasn't worked right since then.

I open Firefox, use it, then close the window. Try to reopen Firefox and it fails with a message that a previous process is still running. Requires me to open Task Manager and kill the old process.

Try to wait a bit longer before reopening Firefox to give Firefox more time to close completely. 
Try to use "Firefox/File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") to close Firefox if you are currently doing that by clicking the close X on the title bar.
See "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
*https://support.mozilla.com/kb/Firefox+hangs

Performance Manager and Data Gatherer

Hello,
I am looking for some basic info (I think). I have been using the EM Console - standalone for some time now but would like to use the diagnostic pack and Performance Manager. Can this be used in a standalone configuration or do I need to buy Enterprise Manager? If it works in a standalone configuration and I do not need to buy it, could you point me in the direction of documentation on how to start the data gatherer on my 9i database on AIX 5?
Thanks,
Jeff Graham

Post Author: Ferhat
CA Forum: Performance Management and Dashboards
you have to find the keyword to see...
i suggest you to uninstall businessobjects and install again(else it's very hard to add the performance management program).
while you install, check the install performance management also(you have to have the keyword).

I try to open iphoto and it comes up with You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto. I have downloaded photo manager and it's telling me to update but it wont update...

I try to open iphoto and it comes up with You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto. I have downloaded photo manager and it's telling me to update but it wont update...

iPhoto is Apple's included program to manage your photo's and pictures.
It receives updates over time with Software updates and new machine or iLife purchases.
When iPhoto gets updated or a newer version is used, it may alter iPhoto support files, but newer iPhoto versions usually always compatible with older files which it then updates.
If you used a newer iPhoto on your iPhoto support files, then they got altered to the newer format, older iPhoto versions can't read the older format.
Somewhere along the line you somehow got a older version of iPhoto on your computer, you need to fine the newer version of iPhoto (not this photo manager, sounds like another program)
Or somewhere along the line you used a newer iPhoto version (like on another Mac) and it altered the iPhoto support files on your older version of iPhoto.
So the key here is to find the newest version of iPhoto and use that to access your iPhoto support files.
If you didn't access your iPhoto support files from another Mac, then you should have the newer iPhoto version on your computer.
Once you find it, and get it in the Dock, you should remove the older iPhoto version from your computer to prevent this from happening again.
Lastly, if the newer version of iPhoto is somehow gone off your computer, you should be able to get a copy off the latest OS X install disk or iLife using a free program called Pacifist.
http://www.charlessoft.com/
Then you need to check for updates for iPhoto in the program itself, the current version is 9.1.2

Firefox 3.6.8 crashes when accessing Add-on Manager and Google Toolbar (v 7.1.20100723W) is enabled

Well, as I said, Firefox 3.6.8 crashes when accessing Add-on Manager and Google Toolbar (v 7.1.20100723W) is enabled. This is on a 2010 white unibody macbook. I have a google toolbar, and all of a sudden, it keeps saying that it can't communicate with the toolbar. Now, I can't even uninstall it because whenever I go to the add on manager, it says there's an 'unresponsive script'. Could anyone help me? Thanks.

I fixed it by running in Safe Mode, and uninstalling Personas. Thanks again!

Training & Event management and Appraisal

Hi,
Can anyone tell us that Training & Event management and Appraisal are available standard ESS package?
Thanks,
Anumit

Yes, Training & Event management and Appraisal are available in ITS based ESS business package.
But latest ESS business package(webdynpro based) do not have training and event management. You may need to deploy Learning solution. Full functionality of Appraisal is available with ehp4 of ESS BP.

Cannot open Catalog Manager and Job Manager on Windows 7 (11.1.1.6.2 BP1)

Hi,
We recently upgraded to OBIEE version 11.1.1.6.2 BP1 and installed Client tools from the same version (downloaded from Oracle Support). Once installed, ODBC connections are created to connect to the BI Server and we are able to connect to BI Server using Administration Tool. But Catalog Manager and Job Manager are not opening.
Is there any setup missing to make Catalog Manager and Job Manager work?
Thanks in advance.

Hi,
It is a known bug. Please find the solution here.
http://123obi.com/2013/02/unable-to-open-catalog-manager-obiee-11g/
Cheers,
Kalyan Chukkapalli
http://123obi.com

Every time i close firefox, to re-open it i have to either log out and log back in, or i have to go through the task manager and end the proccess, otherwise it just says fire fox if already running and it wont open, how do i fix this proble??

Everytime i am finished using Firefox, if i want to go back onto the internet, i now have to either log off and then log back on. or i have to use the task manager and close the firefox process, it is extrlmely annoying as i have to do it everytime, if i try and open firefor before i do either of what i have explained it just comes up with, firefox is allready running please close all windows to open a new one, or end the process...how do i stop this message from popping up every single time i use firefox????

https://support.mozilla.com/en-US/kb/Firefox+hangs#Hang_at_exit

Lost connection between ovm-manager and ovm-server (ovm 3.1)

Hi,
I have a manager as a VM on my laptop and a physical server as an ovm-server. Everything is fine when i boot the server but after some time, the manager stop to show the information from the server. in the ovs-agent log file the following messages are repeated regulary
[2013-08-29 13:06:19 6160] DEBUG (notification:289) Trying to connect to manager.
[2013-08-29 13:06:20 6160] DEBUG (notification:291) Connected to manager.
[2013-08-29 13:06:20 6160] ERROR (notification:316) No manager Core API server object for 10:60:4b:88:bc:24:10:60:4b:88:bc:25:fe:ff:ff:ff.
[2013-08-29 13:06:34 6171] ERROR (notification:64) Unable to send notification: (111, 'Connection refused')
I did not reboot neither the server nor the manager. No IP change. Rebooting the manager has no effect.
The only way to restore communication is to restart the ovs-agent on the server, but this restart disable the network card. I must be physical on the server to restart the network.
any help will be very helpful
best regards
Jean-Marc

Hi,
The are many steps to verify:
Verify with your firewall on the Oracle VM Manager system (service iptables stop).
Verify with a ping between OVM Manager and OVM Server using the IP Address and using the hostname for each one (from OVM Manager : ping ovm-server ; and from OVM Server: ping ovm-manager).
I hope this can help you
Best Regards

WAAS management and CM

Similar Messages

Maybe you are looking for