WAAS - NME Implementaion confirmation question

Hi,
I would just like to confirm if there is any reason why using a /31 mask would not work with an NME using WCCP? If not, what the reason would be.
I don't believe this would work with the Appliance on it's own VLAN, probably at least a /29??
Thanks in advance.

You will need a least a /30
With a /30 you get 2 host addresses.
So lets say network 0, host 1 and 2. x.x.x.1 for
the gateway, 2 for the NME, WCCP router list x.x.x.1,
Here is a sample config
R2821-edge#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
R2821-edge(config)#int integrated-Service-Engine 1/0
R2821-edge(config-if)#ip address 10.10.100.1 255.255.255.252
R2821-edge(config-if)#service-module ip address 10.10.100.2 255.255.255.252
R2821-edge(config-if)#service-module ip default-gateway 10.10.100.1
R2821-edge(config-if)#ip wccp redirect exclude in
R2821-edge(config-if)#exit
R2821-edge(config)#end
R2821-edge#copy running-config startup-config

Similar Messages

HT1689 How Do You Change Security Confirmation Questions/Answers?

I am trying to purchase from my new iPod Touch. It keeps asking for answers to security confirmation questions. I have forgotten the answers. How do I change my security confirmation answers/questions?

Try:
https://discussions.apple.com/message/18401752#18401752
https://discussions.apple.com/thread/3955432?tstart=0

WAAS Application Requests - Process Question

Non Technical Process Question
We all have forms we have our users complete when a firewall rule or change is needed. You may even have a similiar documents for when load balancers or DNS changes are required. Does anyone have document they can share that outlines what pieces of information are needed for intergrating applications into WAAS? What about ongoing changes?
Source, destination and TCP port information is really a very small portion of the what needed to maintain a clean a defined methodolgy within the WAAS manager. Does anyone have an example or can describe how you collect the initial information to set up WAAS but how do you keep track of changes that may be needed as the application charaterics change or the server farm expands horizontally?
Thanks - Sam

Sam,
the general answer for detailed information on how to configure WAAS for certain applications is described here:
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v501/configuration/guide/policy.html
In general, WAAS comes preconfigured for the most widly used applications in the industry.
In order to understand, which configuration is necessary for a new application, one needs to understand the basic options WAAS offers.
These are two options:
1) Use an Application Optimizer (AO) if you need some dedicated protocol know how. ( e.g. (e)MAPI, CIFS, SSL, HTTP, ICA, to name some)
2) Generic TCP traffic is optimized using TCP Flow Optimization (TFO), Data Redundancy Elemination (DRE) and Lempe Liv (LZ) compression.
The in terms of processes, the question is:
1) Is there a policy preconfigured for the new application?
     a) yes
          If an AO is used, does the AO need configuration? ( example: SSL AO requires certificates)
          Do we have specialities which require further fine tuning? ( Answer is mostly: no, Example: non-standard ports)
     b) no
          You define what you need for the application based on the protocol characteristics.
          If you have defined these characteristics you can choose one of the AOs, or define which of the "generic" options fit the traffic. For example, for traffic that is already compressed, it does not much benefit from LZ, so choosing only TFO and DRE. Another example is traffic that has not much of dublicate data, perhaps it does not benefit a lot from DRE, so you configure TFO only.
Does that answer your question?
Thanks,
chris

Secret confirmation questions do not appear in dialogue box

When trying to buy an app Apple asks for identity verification but when the Secret Questions Confirmation dialogue appears there are no questions?

Apple ID security issues -
Account security issues almost always require you to speak directly to an Apple representative to securely establish your identity as the account holder. You can set it up so that Apple calls you, either immediately or at a time convenient to you.
1. Go to www.apple.com/support
2. Choose Contact Support and click Contact Us
3. Choose Other Apple ID Topics and choose the appropriate topic for your issue
4. Follow the onscreen instructions

Could any expert in WAAS Mobile see this question?

Hi everybody!
I succesfully installed WAAS Mobile in a customer. Everything worked fine with WAAS, except for a particular application. WAAS Mobile is not working with a particular client/server Application. When WAAS Client is running, the Application Client is not able to connect to the Application Server.
Analyzing the packets capture with Wireshark, I observed that the first 3 packets are not being redirected to the WAAS Mobile Server. It is going straight to the Application Server.
At first I thought that I needed to add another process to the Proxied Process list in WAAS. But using the TCPView software I can see that the process that is sending the first packets is the one that I already added to the Proxied Process list.
The question is: Is it normal for these first packets not passing through WAAS Mobile Server? Or all the packets of the process should be redirected to the WAAS Mobile Server? Could this problem be a bug? What is the best way to troubleshoot this?
Thanks!
Marcio

First of all, individual packets are not passed thru to the WAAS Mobile Server. All TCP connections for accelerated applications are terminated on the client. The packet content is encapsulated and passed to the WAAS Mobile Server using a UDP connection on port 1182. The fact that you saw packets going to the application server means that the applicaiton in question is not being optimized for whatever reason. To determine the reason, please generate a client and server System Report directly after exercising the problem application with WAAS Mobile. Either open a TAC case for the issue or send the system reports to the Cisco SE assigned to your account. The system reports can then be analyzed to determine why the application is being bypassed.

Confirmation question - advice needed

Hi would just like some confirmation before i buy an airport express and can't seem to find this question directly answered.
Ok i have a cable modem that runs into the WAN port of a linksys router - which then connects up two pc's using standard RJ45 connections to the routers LAN ports. The pc's are static (immobile) and happy with the RJ45 connections
I also have a powerbook and have to connect an RJ45 from the router to use the Internet etc, but i want to be able to move around with the laptop. All pretty straightforward so far.
What i want to know is if I can take the RJ45 from teh router that was going to my mac and plug it into an airport express and then connect from the mac using wireless to the airport which is linked to the router?
I dont want the airport to do any routing or anything as there will only be one mac connecting via wireless and the Linksys router is handing out static IP address;s to the 3 machines on the network.
I just want it to pass the signal from my static - IP addressed mac to the main router without interfering - the Linksys Router is configured to portforward to the static IP address on the Mac so all the airport would do is bridge the wireless gap from router to my mac.
I assume i can do this but would just like to confirm. Please let me know if this is not the case. Thx

To elaborate on David's reply, you can turn off the router that's built into the Express (by turning off "Distribute IP addresses" using Airport Admin Utility) so that the unit acts as a simple Ethernet-to-wireless bridge. In fact, I have an Express doing exactly that, connected to a wired D-Link router. In addition, I have a second Express extending the range of the first and providing AirTunes streaming to my stereo.

EDI Order Confirmation Question : attach additional .PDF file

Hello,
Is it possible to attach to an Order confirmation (for customer standard order) an additional pdf.file automatically? If yes, what are the necessary steps needed?
Hoping for reply.
Many thanks !

Hi,
You can attach any document to Sales Order.
First you need to enter that document through tcode CV01N in SAP.
Then in Sales Order select one Item then go to Extras & then select document. You can browse the document here which you have enter through CV01N.
Thanks

Printing contacts trouble and backup confirmation question

I have two questions:
1) I am trying to print all of my Contacts. I go to the page where I can see the long list of contacts, select “All,” click on the Actions dropdown menu and choose “Print,” and then I receive this message: “Something happened while we were trying to print your request. Please give it another try.” I have been trying and retrying several times a day for more than a week. What is wrong?
2) When I was using Backup Assistant, I received a “backup complete” message each morning. Now I am apparently using The Cloud, and I never see a “backup complete” message. Is that the way it is supposed to operate?

AliceinMD,
We'll help with both of these! As Ann154 stated, you can export the contacts to a CSV file and then open them in a spreadsheet to print.
The Cloud is a great improvement over the former Backup Assistant program. What device do you have? If you access the app, and then tap on the two arrows circling each other in the upper corner everything should back up for you. You will then get a notification when a backup needs to complete.
SarahO_VZW
Follow us on Twitter @VZWSupport

How I can reset confirmation question?

hello,
sorry on my bad english...
i have problem with reset my security question!! Dont give me option to send reset on my mail, and if I make mistake 4-5 times , they block me temporary and I have to wait for 8 houres... How i can change my security question?... Thanks in advice!

You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(121881)

Asking a confirmation question

forms have fnd_question to ask a Y/N question.
what is the equivalent to this in jdeveloper to ask a question if you want to proceed or not..
thanks

There is a good example avaiable in
Toolbox tutorials -> Delete exercise -> Task 3: Implement the Delete Action
--Prasanna

Urgent - Please confirm questions regarding repository (.rpd)

Please confirm that by changing the repository (.rpd) any reports developed using that repository will be lost.

Kishore mentioned the Subject Area, and his statement is correct. But allow me to describe what that means in terms of the repository.
You have three layers in the repository - Physical, Business Model, and Presentation. Even if you make TONS of changes in the Physical and/or Businee Model layers, but the folders and columns in the Presentation Layer remain the same (i.e. if all you're doing is changing the underlying definitions of the Presentation Layer objects), then your saved reports will be just fine. Answers will see the exact same columns that it saw before the changes, because you would have made no changes to what Answers looks at -- the Presentation Layer.
You may also ADD new columns to the Presentation Layer, and that won't hurt anything either, because your existing queries wouldn't have included them yet -- they didn't exist before!
If you move columns around in the Presentation Layer, into different folders, that would typically be a bad thing, because your existing query would be expecting to find a particular column in a particular presentation table, and it wouldn't be there.
If you rename a column, you would probably be OK. When you rename a Presentation layer column, OBIEE automatically assigns an Alias (see the columns Alias tab), so that existing reports don't break.

SATA Confirmation Question

I am currently running an Solaris 10 x86 Beta 6 on an ASUS A7V600-X mainboard. This mainboard supports SATA of which I have two 160gig drives installed. Is my understanding correct that these drives are not supported?? Solaris 10 recognizes that their is a raid controller but did not list the disks when I installed the OS on the IDE (have 4 drives, 2 SATA and 2 IDE). Any thoughts comments or pointers on if there is anything I can do to access them??
Thanks
- Tim

After many attempts I have been able to load Sol 10 on asus A8V-E Deluxe but since there are no drivers for the Yukon 88E8053 GB LAN or my All-In-Wonder x600 ATI PCIx adapter - that fact that you can load up Solaris 10 doesn't much matter.
This VIA chipset is just not in the hunt when it comes to Solaris, neither Asus nor VIA seem interested in the HCL for Sol 10.
Hats off to SysKonnect for at least trying to provide drivers, for this type of MB under Unix - Sol 10 will load skge for this MB (under 32b kernel)- but won't attach it.
Ben

Order confirmation question

Hi,
on Jan 3rd I downloaded Photoshop CC, 12 month subscription.
I received email conflation with my order number.
however while downloading/installing I think something went wrong because at the end I got the message that I had downloaded a 30 day trial version?!
how can I check if my photoshop will be active for 12 months as per my order??
thanks!

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

Confirmation Question

hello everyone,
always when you want to do sth with itunes, you are asked ie, "do you really want to delete this?". i think i marked the checkmark once, but i want to get asked again, "do you really wanna delete this?". how can i change the settings again?

Go here -> http://home.comcast.net/~teridon73/itunesscripts/
and download this -> itunespreferencesfix

HT1491 i forgot my answers to my security confirmation questions

what are the answers to who was my first teacher?
what was the first concert i saw?

I would I know? You are not addressing Apple here. We are just users like yourself. Try this previous discussion:
how do i change apple ID security...: Apple Support Communities

WAAS - NME Implementaion confirmation question

Similar Messages

Maybe you are looking for