Wacom pen won't work with keyboard's USB?

My old Wacom pen Graphire was working well with my old iMAC 333 OS 9.2.2(five colour iMAC) USB 1.0 connector; but when I plug it into my new iMac G5 keyboard's USB(also 1.0), it doesn't recognize it, I already downloaded the latest Wacom driver for OS X, and my new iMac is using OS 10.4.3., I don't want to waste the keyboard's USB, does anyone help me? Thanks a lot!

How bizarre. I am wondering why all my new keyboards (I have three of the new design) will not let me use either keypen, microsoft mouse (I needed another button and the Mighty Mouse had not been released or Wacom on the rear USB ports. The same goes with my Powerbook. I cannot connect to the keyboard USBs (seperate keyboard) but can connect on the USB 2.0s on the laptop.
There is a solution... the bluetooth wireless Wacom. No wires, no fuss

Similar Messages

My wacom tablet won't work with CC photoshop any more.

Over the past 3 days my tablet has become incredibly glitchy in CC. I'm on a Mac and I use an Intous 5 large tablet. I've tried everything recommended through the wacom site. I've reinstalled my drivers, updated my computer....ect.
There where issues prior to this but not as bad. I use dual screens and when I move out of cc and scroll onto my other screen, when I come back to photoshop it takes a while to react to my pen.

You need to ask in Photoshop General Discussion
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

New iPod touch 5th generation charger won't work with computers or USB power adapter?

I just got this charger less than two weeks ago and just yesterday it started saying "This cable or accessory is not certified and may not work on this iPod." It will only work on some occasions, but most of the time it won't. Other times it will show that it is charging, but when I select to "Trust" my computer it stops charging. When I plug it into the USB power adapter, it rarely works (even when I try it in different outlets.) Any way to solve this issue?

If a non-Apple cable and the place will not take it back then:
USB Power Adapter Takeback Program

IPod touch won't work with car's USB port after sw update

I've been using my iPod with my 2011 Honda CR-V's USB port to play my music through the car's audio system without issue since I bought the car. This stopped working after the latest iPod software update a few days ago--the msg on the audio screen says it's now "unsupported". Is there anything I can do to fix this without a full restore? Why did it change? Thanks for any help.

Hey there,
Glad to hear we're getting closer. Looks like you're connected to the network, just not able to utilize it's internet connection.
Let's check your iPod's IP addres. Tap Settings > Wi Fi and look for your network. To the right, there's a blue circle with a white arrow in it. Tap that circle. If the IP address starts out with 169.x.x.x, it is a self-assigned IP address. Since it came from the iPod, and not the router, it can't be used.
I would recommend resetting your iPod's network settings:
Settings > General > Reset > Reset Network Settings
When the iPod restarts, reconnect it to your network and try Safari again.
If it still isn't working, try powercycling your router and resetting those settings at the same time.
1. Turn off the router
2. Reset the network settings again, as indicated above
3. Turn the router back on
4. Reconnect the iPod to the network
If it still isn't working, let's check your iPod's software version.
Settings > General > About
If you've upgraded to 2.0, the latest version is 2.0.2. If you haven't upgraded, the latest version is 1.1.5. If you're not at either of those numbers, connect the iPod to your computer and use iTunes to check for software updates for the iPod.
Regarding the router settings, I'm not familiar with your router manufacturer. I'd check their website for instructions on that. I think at this point you wouldn't really need to change any settings, but just check for firmware updates.
CG

X200 External Monitor -- In High Resolution, Tablet Pen Won't Work

I have an X200 Tablet running Windows 7 and need everything I write on the tablet with the digital pen to be simultaneously visible on an external monitor. The problem is that when using both monitors simultaneously, the X200 will only display on the external monitor at the X200's maximum resolution (1280x800) even though the external monitor can go to a higher resolution (1680x1050).
I've tried the Ultramon app, which allows the Tablet and external monitor to both be at their max resolution (which is my goal) but then the digital pen won't work on the Tablet.
Any thoughts on a solution?

• Went to Best Buy
• Paid for a DYNEX Mini DisplayPort to HDMI Adapter ($25)
• Came home and plugged in the adapter then the HDMI to DVI cable to the monitor. (Note: Monitor is a LG Flatron L22WTG) - DID NOT WORK
• iMac knows monitor is plugged in and I can change the resolution on both monitors and mirror. (Note: Changed to every resolutions with/without mirror image.) - DID NOT WORK
• Restarted computer - DID NOT WORK
• Turned off/on LG monitor many times - DID NOT WORK
• Unplugged/plugged back in many different ways - DID NOT WORK
• Changed the HDMI to DVI cable with a better cable - DID NOT WORK
• Installed BootCamp with Windows 7 - *BOTH WORK 100%*
• Rebooted to OS X 10.6.7 (Snow Leopard) - DID NOT WORK
• Installed Windows XP - *BOTH WORKED 100%*
• Reinstalled OS X 10.6.4 (Snow Leopard) - *BOTH WORKED 100%*
• Updated OS X from 10.6.4 to 10.6.7 - DID NOT WORK
Seems to be a driver problem with the new update (10.6.7). I will not update again till drivers are fixed.

3rd party USB mouse won't work with G4 iBook 10.3.9

3rd party USB mouse (see specs below)won't work with G4 iBook 10.3.9.
http://www.inland-products.com/singleproduct.asp?search=usb&partnum=07340-SpecR
I notice the specs say this mouse works with windows(no mention of Mac) yet the guy where I bought it assured me it would work fine with a Mac. The keyboard/mouse preferences shows a muouse but there is no movement or response from mouse. I would assume it was not reading it if not from appearance of "mouse" preference. I also have intalled UBBoverdrive in hopes that that might help but device/mouse menue does not appear to support mouse.
Is there a way to get this to work or should I just return it to the vendor?
Can anyone suggest a good CHEAP 3n button mouse for Mac?

The name of that mouse is deceiving. It is not a USB mouse it is a wireless mouse. Unfortunately without the proper OS X drivers for the USB/wireless adapter you won't be able to get that thing to work.
If you are looking for an inexpensive USB mouse, checkout the Kensington Mouse in a Box Optical.
Does your iBook have Bluetooth? If so take a look at the Kensington PilotMouse Mini Bluetooth Mouse. I have one of these and it works great.

I just purchased the Magic trackpad but it won't work with my safari, what can i do?

I just purchased the Magic Trackpad but it won't work with my safari software, what can i do?

Make sure you settings are correct in System Preferences > Trackpad
Or System Preferences > Keyboard & Mouse then select the Trackpad tab.

My Viewsonic monitor won't work with the Imac using the Mini Port to DVI adapter.

My Viewsonic monitor won't work with the Imac using the Mini Port to DVI adapter. I also tried the HDMI to DVI adapter ane the Mac-Mini with same result. The monitor does work on my older Macbook Pro that has the DVI connector. Is it a Software/Driver issue ?

Should be extremely simple, please carefully read Connect multiple displays to your Mac. If you still have problems then it's probably a cable issue that would be resolved by replacing the adapter cable. You should be using this adapter. If you are using a third party adapter that might be your problem!

New ipod touch won't work with itunes 10.6.3 says it needs 11.1 but I cannot load that on my macbook using OSX 10.5.8 any way around this?

New ipod touch won't work with itunes 10.6.3, says it needs 11.1 or newer but I cannot load that onto my MacBook running on OSX 10.5.8 - is there anyway around this?

No. If your MacBook has an Intel processor you can update to OSX 10.6.8 and then install the latest iTunes.
A 5G iPod with iOS 7 requires that if you have a Mac you have OSX 10.6.8 or later.
You can get 10.6.8 here:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

TS1363 "An iPod has been detected but it could not be identified properly" iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.

"An iPod has been detected but it could not be identified properly" iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.

Hi cueball819,
Thanks for using Apple Support Communities. This article has steps to try if your iPods aren't recognized by iTunes or Windows:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
Cheers,
- Ari

Itunes updated and now it won't work. I unstalled it and reinstalled the older version and it still won't open. Says the itunes library won't work with the older program. Help

Itunes updated and now it won't work. I unstalled it and reinstalled the older version and reinstalled a older version and it still won't open. Says the itunes
library won't work with the older program. Please help

It says it cannot removed the older version of iTunes.
Doublechecking before proceeding ... what's the precise text of that message, please? (There's a couple of different ones I can think of that you might be getting.)

I would like to update to Firefox 5.0.1, but I can't due to, too many things won't work with the version & will be disabled.

I have wanted to update from 3.6.22, to 5.0.1, but can't do to the following reasons: I can't due to, too many things won't work with the version & will be disabled. They are: Microsoft. NET Framework Assistant 1.2.1, Iconix 3.90.1, HP Detect 1.0.5.1, Yahoo! Toolbar 2.3.5.201101200332202 (I don't care about Yahoo! Toolbar, because I don't use it!). As soon as these issues are fixed, I will be able to update, to the latest versions. These issues should be fixed & ready to work, before a new version is available. Thank you!

Try using this extension to force compatibility.
* https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
Check and tell if its working.

I have a Canon D60 camera, my raw files won't work with the raw converter in my Photoshop CS5. Do I need CS6?

Photoshop CS5 won't work with the raw files from my new Canon D60 camera. Do I need CS6?

A Canon EOS D60? It had support since Camera Raw version 1.0.

FM transmitter won't work with my iPhone

I bought a Premier FM transmitter from Auto Zone the other day. It has a 30-pin connector with an led panel that lights up when you connect it to an apple device. It's suppose to work with all 30-pin devices but doesn't work with my iPhone 4 (iOS 7.1.2). I have tried it with my iPod Touch 2g and two other iPhone 4's that belonged to my friends, and it worked with all three devices. Any explanation why it won't work with mine?

"the Middle East" is a really big place. I suspect you bought a gray market hacked phone. Call Apple Care and give them the serial number. Maybe they can tell you if it's locked and to what carrier.

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light.

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light. Can anyone who has made this change offer some advice?

apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

Wacom pen won't work with keyboard's USB?

Similar Messages

Maybe you are looking for