WAD: Design request for web template with re-occuring table object

Hi all,
I'm trying to create a web template design in WAD (WAS 6.20) using javascript that would loop and re-use the same table web item object displaying different sales employee data. The challenges I'm facing is that the number of employees to report on might be different for the reporting period and the report should have a sales employee specific header preceeding each table. And also the customer is looking at receiving a canned (precalculated) report generated weekly.
I'm thinking that I could try looping through the 0salesemply characteristic values as displayed from a dropdown box object and pass the individual value as the table object's filter value and hopefully re-generate and render the same table with different filter values until the end of sales employee list of names is reached. Within that same loop, a second table pointing to a different data provider can also display selective data specific to that sales employee.
My question is would such a design render the same table item multiple times based on the number of 0salesemply values and on a single web page. Would such a design work or would I need to look at designing a BSP application querying the ODS table directly.
If anyone has any comments on how else I can achieve this or can provide examples of similar design it would be very much appreciated.
Thank you all.
Frank
Message was edited by:
Frank Goneau
Message was edited by:
Frank Goneau

Similar Messages

What is the design pattern for web application with struts & hibernate?

Hi everyone,
I am new to web application developement.I am using struts for MVC framework & Hibernate for ORM framework.I am little confused that struts used bean representation for collecting form fields(Bean 1),value objects(DTO) for passing value to the JSP(Bean 2) & hibernate use the bean like representation for persistent object(Bean 3).Whether we must use all the bean's which are similar to each other or any reusable bean recommended?

I'm sure why it didn't work. That is how I bundle the JRE. The only disadvantage about bundling is the size of the installer file will be pretty large. In my opinion, relying on a public version is not a good idea if you have no control of the target box. The user might, for some reason, decide to uninstall java or upgrade to a new incompatible version and your app. may stop working. I'm sure many on here will disagree with this though.
I always use the marner .exe wrapper:
http://www.megaupload.com/?d=FYZAVM77
and inno installer:
http://www.jrsoftware.org/isinfo.php
They're both free to use and I've had no problems with them. Another wrapper is Javaround:
http://sourceforge.net/project/showfiles.php?group_id=234356

BEx WAD - Creating a Web Template with Chart and Table

Hi All.
I am creating a new Web Application. This contains a dropdown with 2 reports to select.
When the user selece report from the dropdown list, it has to display both Table and Chart for the report.
Could you pls explain me how can I do this.
Thanks
SR.

Still the same way pretty much but you can view here:
http://helpx.adobe.com/business-catalyst/using/add-blog.html
You got all this: http://forums.adobe.com/community/business_catalyst/documents
Which is on the overview page of these forums. And in there are links to 3rd party resources too.

Looking for web template with 3 link-levels

I'm looking to make a picture gallery with the standard Thumnails linked to screen-size shot. I'd like th screen-size shots to be linked to the full-size image to users can download a full-resolution version of the shot.
Am I making things too complicated? Is there an easy way to enable folks to download the full-resolution version other than a big FTP directoty?
Thanks,
-Ed

Thanks for the pointer.
WOuld anyone know where I can get information related to created (editing) my own template beyong just background color etc.? I can't even find where the templates are saved to see if I can edit them by hand myself?
-Ed

Print a Web Template with Web Application Designer 3.X

Hello
I would know how I can print a web template made with Web Application Designer 3.X and that it is in the Intranet.
Actually I'm printing that page with the option of the browser (Internet Explorer) but it print only I see, no print all the chart and the rest of the columns.
How can I print all the data that compose the web template?
Thank you.

Hello Sharath,
First check whether you have change authorizations for WAD, check you user name is added in the role for web templates and also check the authorizations.
then in the web template in the menu bar go to view option ,select web items and properties , so that you can find them in the left hand side, then replace the chart item with the table and assign the query to the table.
hope it is clear,
assign points if useful.

ABAP Interface for Web Template Design

Hi BW Gurus,
I have report published in the portal through BSP. Please some advise me what are the ABAP class files so that I can design my portal reports.
I am sure there are few class files where I can design the portal reports. Let me know your important help....
Thanks
Ganesh Reddy.

Ganesh,
CL_RSR_WWW_MODIFY_TABLE is used to customize the web templates in BW3.x.
the way I understand the data flow to web templates work is :
Query(s) --> Web Template class --> HTML --> <CL_RSR_WWW_MODIFY_TABLE - this class is optional >
This works only for Web templates though - as for classes that are used in web templates - create a web template and then assign the same to a request - you will find the classes available under that request under PHIO or something like that.

Web Template URL for Web Template ZTEST could not be Generated

Hello Experts,
I have designed a Template in WAD with the name ZTEST(example) when i am trying to execute it in Browser, it is throwing an error like "Web Template URL for Web Template ZTEST could not generated". I am working on 7.0 WAD
Please suggest me if there is any settings to done.
Thanks in Advance,
Regards,
Vishnu.

Hello Mr. Wond,
Even if i am Executing using a default Template it is throwing the same error that " Web Template URL could not be generated". Meanwhile when i am working on this issue i found that some Command URLs should be defined, but i am unable to trace where to define this URL Command like <a href=u201Dhttp://myAppServer:myPort/SAP/BW/BEx?pageno=1&request_no=8&cmd=ldoc&template_id=EXAMPLE_TEMPLATEu201C></a>
Please suggest..................
Regards,
Vishnu.

How to use a Web Template with queries from multiple BW Systems?

Hi all,
can anybody help me how to use a Web Template with queries (DATA PROVIDER)in it from multiple BW Systems?
Thanks in advance, best regards
Frank

Great! Thanks for the quick response.
Have you tried this for XMLA datasources created within the EP system also?
i.e use Web Analyzer to create a view from the XMLA source and use that view within WAD?
Thanks.

How to create a web template with company logo

how to create a web template with company logo . can any one help me with the steps. or any notes. thnaks in advance .
2. i have 25000 articles and client want to have a selection feild to see top article ex:50,10,20, 100, 1000 etc . same for bottom articles . plz let me know how to do it . thanks for replay . i am new bw so plz .
thanks to you all

Hi
1) Please read
http://help.sap.com/saphelp_nw04/helpdata/en/4a/c8353c51aab32be10000000a114084/frameset.htm
2) Create a condition in the Query Designer: Use a formula variable
See http://help.sap.com/saphelp_nw04/helpdata/en/73/702e39074dc93de10000000a114084/frameset.htm
Heike

Web Templates with Tabs

Hi, We have quite a few reports we have developed for users that have around 5 or 6 tabs. When we adding or remove any functionality we have to maintain each of these reports. Does anyone else have/had this issue and what is a good strategy to move away from Web Templates with tabs?
Thanks!

to my knowldge, we don't have any option... we need to maintain every time.
I can think how complex it is...if you have 5 or 6 tabs... it 's very complex. Going forward... for small change.. like adding new tab etc... you need to be very careful.
On every call... try to reset to initial every time you call a tab... then try to pass values as per the requirement. ex: Title, Filters, settings, table etc.
Initial view we will disble every thing... we will one by one... with multiple commands...
Nagesh Ganisetti.

Filter Web Template with URL Cmd: doesn't work with compound infoobject ?

Hello all,
I've to filter the query contained on a web template with URL command, but it doesn't work.
The web template contains only one query, and on the free chars I have 0PLANT.
I call the web template adding to the normal url the following command:
&FILTER_IOBJNM=0PLANT&FILTER_VALUE=33
where 33 is the code of the plant I want to filter.
The command is executed, I think, because the result is "NO APPLICABLE DATA FOUND". The fact is that when I execute this query on the Bex filtering 0PLANT by value 33 the data exists.
May be because 0PLANT on our system is in compound with 0SOURSYSTEM ? In this case, what's the value I can use as filter ?
Thank's in advance,
Max

Hi,
please see http://help.sap.com/saphelp_nw04/helpdata/en/59/edfe395dd76846e10000000a114084/frameset.htm
especially:
If the variant with ending 'EXT' is selected, the fully compounded value has to be entered in the external format, for example, 24.12.2000.
If the ending 'EXT' is not used, the fully compounded value has to be entered in the internal format, for example, 20001224 for 24.12.2000.
and
In the internal display (see table below) you can easily determine the name of the characteristic and the filter value using the URL parameter &snippet_operations=%20 (see also Object Tag for the Properties of Web Templates). Call the Web application with this URL parameter. If you filter using the context menu, the parameters FILTER_IOBJNM and FILTER_VALUE are automatically added to the URL in the Web browser. You can then use the desired values with Command URLs in hyperlinks.
Heike

How sharepoint understand when user requests for web applications by their DNS names

HI
I configured Alternate access mapping in my sharepoint farm for default ,intranet zones
and spt farm has two web front end servers and they load balancing by F5 device
in WFE servers there are different web applications are running on different ports
so here I want to know how load balancing works, load balancing configured in F5 device.
when users request a webapplication from browser (ex http://cms) where this request will go
1)when I ping cms and other web applicaations it returns me a loadbalancer server IP for all web applications;
ping cms : it returns 10.xxx.0.80 , same ip returns when I ping for other web app
but ex CMS web application run on the 10.xxx.1.26:81 port in sharepoint server
2) and these sharepoint web applications running on different ports in sharepoint web servers , so here how sharepoint understand when user requests for web applications by their DNS names
http://cms and http://products etc
adil

I'm not sure if the F5 can add a port number (I'm not an expert on load balancers). But in general if you design the SharePoint site to run on port 81 then you need to have port 81 appended to the request or it won't work. http://cms in your
example would take you to http://cms:80 not http://cms:81. But in general DNS will resolve the address back to the F5 load balancer. The load balancer will look at the header of the HTTP request (which contains the original address you requested)
and forward the request to the appropriate web front end IP address. If your web front end is using one IP address for multiple sites then those sites need to be differntiated by using a custom port like 81 (which must be included in the original request)
or because a host header was bound to the web application when it was created. If they are running on different port numbers then the request must include the port number by the time it gets to the SharePoint server.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Design Pattern For Web Services.

I tried asking siomilar questions in WebService Forum but didn'y got any replies.
Can anybody tell me what should be the Design for Web Services.
I have understanding that there can be just 1 Interface/Implementation class for each Web Service, and which will have 1 end point.So for evry such Interface we will have to have 1 Web Service.
Can someone please clarify wheather I'm correct or not ?
I guess that If my application has many Interfaces and I have to expose the application as Web Service.Then I will have to expose all methods from one Interface and then expose this new Interface as Web Service.
Is this how WS will work.
Any pointers to design PATTERNS for Web Service will be highly appreciated.
Thanks
Rahul

I don't know if anyone has documented new patterns specifically aimed at web services but the old ones definitely apply. Like you were alluding to, there is a letter-envelope decoupling of interface and implementation with the XML WSDL interface and coded implementation.

Building client proxies for web services with SOAP attachemtns

Hi all.
I'm currently building a series of web services that take SOAP attachments as
input, but I am unable to generate the java proxies for testing the services via
WebLogic Workshop 8.1. When I attempt to build the proxy, I get the following
error:
Warning: Failed to generate client proxy from WSDL definition for this service.
Suggestion: Please verify the <types> section of the WSDL.
Is there something I need to alter to get this to work, or does workshop not support
client proxies for web services with DataHandler parameters?
Thanks.
-Brian

Thanks for the help. This is my first web service with SOAP attachments, so it
may have been a long time till I realized that.
-Brian
"Michael Wooten" <[email protected]> wrote:
>
Thanks Brian,
The problem is that you are trying to use the "document" soap-style :-)
If you change this to "rpc", you'll should be able to successfully generate
the
client proxy jar. The soap-style property, is at the bottom of the "protocol"
property sheet section, for the JWS.
Regards,
Mike Wooten
"Brian McLoughlin" <[email protected]> wrote:
Sure, sorry about that. Attached is the wsdl for a sample web service
I created
just to test the proxy generation.
"Michael Wooten" <[email protected]> wrote:
Hi Brian,
Would it be possible for you to post the WSDL, so we can see what might
be causing
the problem?
Regards,
Mike Wooten
"Brian McLoughlin" <[email protected]> wrote:
Hi all.
I'm currently building a series of web services that take SOAP attachments
as
input, but I am unable to generate the java proxies for testing theservices
via
WebLogic Workshop 8.1. When I attempt to build the proxy, I get the
following
error:
Warning: Failed to generate client proxy from WSDL definition for
this
service.
Suggestion: Please verify the <types> section of the WSDL.
Is there something I need to alter to get this to work, or does workshop
not support
client proxies for web services with DataHandler parameters?
Thanks.
-Brian

Open web template with different language!!

Hy experts, i have this question: i have a web template and i would create a command that open the same web template with another language.
I tried to insert a hyperlink with sap-language parameter but in this way navigation properties on table and filter value's aren't maintened in the new web template .
Could you help me?
Thank's a lot
Andrea

I have done this using iviews in the portal by using
ie
Language = ZH in the application parameter
will fire up the iview in chinese on a hardcoded EN BI portal
Then you can have the same iview without the language string and that fires in the portal language (if hardcoded) or the personalisation language of the user

WAD: Design request for web template with re-occuring table object

Similar Messages

Maybe you are looking for