Wad reqt - Combining two individual charts

Hello Experts,
         I have a requirement in WAD where in I have two stacked column charts as shwon below.
         These two column charts are using two different queries. First column chart shows keyfigures related to LT.
         Second column chart shows keyfigures related to LF.
         Requirement now is to combine these two charts as single stacked column chart.
         The new single column chart shoul show the bars for LT and LF for the given month side by side.
         Please help me to achieve the same.
         Thanks in advance.
Regards,
Annu

Hello,
        @Yasemin : I can create a query as you suggested and use the same for creating the chart.
        But the problem is to create the chart as desired.
        I need the stacked column with two bars for each month.
        First bar must should show first three key figures.
        Second bar must show the keyfigures from 4 to 6.
        Your suggestions are valuable to me.
Regards,
Annu

Similar Messages

Combining two different Chart types into one graph

Hi All,
I am developing a graphical BW report using WAD. I need to place two differnt chart types into one graph.For example, I have Volume and Quantity .Here the volume should be displayed in Bars and Quantity should be displayed in Lines in the same graph. X axis(Country) is same for these two . I am not sure how to achieve this. Please do let me know if anyone has solution for this.
Thanks for your time.
Thanks & Regards,
Raja

Hi Andreas,
One word I can say is 'Perfect' . Even though I am out of office now,I hope the example perfectly will solve my problem.I will try it.
Thanks for Aduri and Pcrao also for their suggestions .
Thanks again and I assigned points to all to say my thanks
Regards,
Raja

How to combine two types of charts in WAD

Dear experts,
I need to create a chart in WAD that displays 12 columns and 1 line. This is the structure of my query:
Rows :
Operation Code
Columns :
Total Capacity
Month 1 Requirments
Month 2 Requirments
.....Month 12 Requirements
I would like to show the monthly requirements as bars, but the Total Capacity as a single straight line accross all 12 months.
I tried to create a bar chart with 13 series. 12 of the series were bars and 1 was a line, but this didn't work. I just got a single "dot" for the Total Capacity instead of a continuous line.
Any suggestions would be greatly appreciated!
Thanks,
Kathryn

Hi Kathryn,
What i understood that your requirement is to create a graph with 12 bar columns and 1 line colmn.
this is you can achieve in the wad.
when we create a chart, in its properties, you can specify the bar or column or line for each key figure in your query. I dont exactly remeber the step number which gives you this option, but when you create chart, right click on it edit the chart, there comes a chart wizard (5-6 steps), in 3 or 4th step you have this option.
I had same requirement and did this. But rite now i dont have access to server so cant tell u exact step number.
Thanks
Dipika

Is there a way to combine two Smart Playlists without dragging each individual song from one list to the other?

Is ther a way to Combine two Smart Playlists without dragging and dropping each song into the other Smart Playlist?
Any help is greatly appreciated.
Debra

With the timeline selected, go to File/Export/Movie and export each as a DV-AVI video.
You can then combine those AVIs into a new project with virtually no loss of quality.

How to combine two reports in obiee 10g(not union)

Hi Everyone
I have got a requirement where client is asking to combine two report to one
Report A has columns
"Region", "category" ,"in house " ,"sales" which can be shown by applying filters for current running year
Report B
Region,Category, Week5,week6, week7,week8 in this showing sales in individual week by using pivot view and limiting to four weeks
with a week filter
Now client req is to combine both reports into single one
region, category,inhouse,sales,week5,week6,week7,week8 here the issue is inhouse and sales data has show yearly data and week 5,week6,week7,week8 has to show weekly data .And weeks columns has to get updated automatically .
I am having a confusion in this will it possible to combine both reports, if possible pls help out how to do it
Regards
Sandeep
Edited by: Sandeep on Jul 31, 2011 9:20 AM
Edited by: Sandeep on Aug 1, 2011 1:43 AM

First of all, proof read your post. Generally, grammatical and punctuation errors can be deciphered, but where words are critical to presenting your issue clearly, you must type those sentences correctly. Otherwise, it can be confusing and turn off someone who may want to help.
"...which can be shown without and filters and want data for current year." What does this mean?
"...And weeks columns have to update its week no based on that week." What does this mean?
In an attempt to answer you question, do this:
1) Base your query filters on the "current running year." This will satisfy the requirements for displaying data from the first report.
2) Now add 4 "sales" columns (i.e., same column, but 4 instances of it). In each of these columns, click on the fx button, click on Filters, go to your Time dimension and select the appropriate week, and then click "OK." Now, each of these columns will hold the measure value for the particular week while the "sales" column will have the "running total" for the whole time period.
Once you get the above to work, you can work on automating this by substituting a function in place of the hard-coded week number values.

Combining two or more interactive forms

How do you combine two or more interactive PDF's in Livecycle? I want to combine at least two forms I created separately in Livecycle so I can print them double sided. I am new to this program. If it is a matter of coding, could someone please explain the steps needed to achieve this. I'm hoping it is possible.
Thanks

The only way to combine two LiveCycle forms is in Acrobat. There is a button at the top in Arobat Pro that say "Create". Click that and select PDF Portfolio from the bottom of that list. You can then pick how you would like your portfolio to look and work, and then click the "Add Files" button. You can add as many files as you need to. The display can be customized by changing the color themes, importing a background image or map and creating a custom header. The nice thing about a portfolio is that it can contain a variety of files, not just LiveCycle forms. You can import Word files, videos, music, whatever and when the user selects a file, it will open the native program that they have installed on their computer to run it. Individual pages can be extracted and saved to the user's computer, forms can be filled in and saved back to the portfolio.
The portolio is then saved as a pdf and the total size is less than the sum of all of it's parts. It can then be emailed and opened by anyone with the free Adobe Reader. We use it to combine brochures and forms in the same pdf to make it easy for our clients to access everything they need.
Hope this helps.

Is it possible to combine two pivot report into one ?..

Is it possible to combine two pivot report into one ?..
Then trying to display a chart or table result.

Thanks for the reply.
Let me explain it briefly. I am creating a Report 1 based on one fitler condition and second report is created based on second filter condition.
I have similar column (time periods) in the both report. Then measure column has to combine and show as single report.
This is my requirement.

How to combine two datarows (business component data) in BI Publisher

Hi ,
We are using BI Publisher in Siebel Environment.
We have data coming from two business components (like from 2 diff tables)
a) <?for-each:ssTest1?>
b) <?for-each:ssTest2?>
ssTest1 and ssTest2 are the business components
We need to combine these 2 datarows (a&b) and show the data into a single combined data row for ex like <?for-each:ssTest1ssTest2?> and show all the fields in that.
I'm not sure how we can combine these two data rows into a single combined data row and show the data.
Any help from any one would be apprecated.
Thanks
PV
Edited by: user8633002 on Oct 21, 2010 4:05 PM

Hi sajid
There was nothing more description about your issue in this site and I found an issue below is mostly like yours
http://www.codeproject.com/Questions/855487/how-to-combine-two-table-value-in-rdlc-report
In the issue above, if you want to show the two other tables in the report, I think you could combine the tables into one datatable joining on key. The link below show an example of a DataSet Helper from Microsoft about combine DataSets. Take note of
the related content for other DataSet Helper examples. And then you could use the datatable in your RDLC.
# HOW TO: Implement a DataSet JOIN helper class in Visual C# .NET
http://support.microsoft.com/kb/326080/en-us
In an alternative way, I think you could create a view in the database which combine your tables and use it in your rdlc.
In addition, your issue is about asp.net and you could get more support in the asp.net forum whose link as below.
http://forums.asp.net
Best Regards
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

Combine two resultset sidebyside in coulmn using mdx

hi i am new to mdx,
i want to combine two select statement resultset (side by side like union) using mdx query,please any body help me to solve this query
first query:
SELECT
{ [Last Year] }
ON COLUMNS,
{ {[Location].[Location].&[7], [Location].[Location].&[12], [Location].[Location].&[11],
[Location].[Location].&[19], [Location].[Location].&[17], [Location].[Location].&[16],
[Location].[Location].&[9], [Location].[Location].&[18] },{[Location].[Location].[All]}}
ON ROWS
FROM [Cube1]
WHERE ( [Measures].[Labour %] )
here [Last Year] is a calculated set
{STRTOMEMBER("[Date].[Month].&["+ cstr(year(now())-2) +"-11-01T00:00:00]"):
        (STRTOMEMBER("[Date].[Month].&["+ cstr(year(now())-1) +"-10-01T00:00:00]"))}
2nd query:
WITH MEMBER [Measures].[Budget ] AS IIF(avg([Last Year],IIF(([Measures].[Budget]>0),[Measures].[Budget],null)),
                                       avg([Last Year],IIF(([Measures].[Budget]>0),[Measures].[Budget],null)),0.00),
MEMBER [Measures].[YTD] AS IIF(avg([Last Year], IIF(([Measures].[Labour %]>0),[Measures].[Labour %],null))<>null,
                              avg([Last Year], IIF(([Measures].[Labour %]>0),[Measures].[Labour %],null)),0.00),
FORMAT_STRING = "Standard",
BACK_COLOR = CASE WHEN [YTD] = 0 THEN /*White*/16777215 /*White*/
WHEN [YTD] <= [Measures].[Budget ] THEN 65408
     WHEN [YTD]<= [Measures].[Budget ] +5 THEN 65535
     WHEN [YTD]> [Measures].[Budget ] +5 THEN 255
END,
VISIBLE = 1
SELECT
{ [Measures].[YTD], [Measures].[Budget ] }
ON COLUMNS,
{ { [Location].[Location].&[7], [Location].[Location].&[12], [Location].[Location].&[11], [Location].[Location].&[19], [Location].[Location].&[17], [Location].[Location].&[16], [Location].[Location].&[9], [Location].[Location].&[18]
},{[Location].[Location].[All]} }
ON ROWS
FROM [Cube1]
here   ==> [Measures].[YTD], [Measures].[Budget ] are calculated member
i want result like in
coulmns===> ytd,budget,nov,dec,jan,feb.,,,,,,,,,,out
rows ====> are only locations and total(average of all locations)
please guide me to get solution like mdx query

Hi Vsp,
According to your description, you want to create a calculated member to combine two members, and then set it as Default member, right?
In SQL Server Analysis Services, we can use the script below to create a calculated members.
create member currentcube.[Date].[Day of Week].[weekend]
as
{[Date].[Day of Week].&[6],[Date].[Day of Week].&[7]
Every attribute in a dimension in Microsoft SQL Server Analysis Services has a default member, which you can specify by using the
DefaultMember property for an attribute. This setting is used to evaluate expressions if an attribute is not included in a query. Please refer to the link below to see the detail information about specify a default member.
http://technet.microsoft.com/en-us/library/ms174822(v=sql.105).aspx
Regards,
Charlie Liao
TechNet Community Support

How to combine +two fields without submitting page (via AJAX/HTMLDB_Get)?

Hi all,
After my last contribution "Request for Scott Spendolini" I was able to create the scripts to update fields in forms without having to refresh the page. Thanks again to Scott, Carl and the others who helped me solving my problem.
I have another question regarding this however. How do I combine two (or more) values on a form to fill a field with the values, for instance to create a unique Primary-key field?
This is the example: combine the postcode and the house-number (and maybe an extension to the housenumber) in one field 'adrescode'. This uniquely identifies an adress in the Netherlands. I can 'get' the postcode to fill the first part of the adrescode, but how do I modify the scripts to 'get' the housenumber (huisnummer) and - if not left null - the extension to the housenumber?
Here are the scripts I created to far:
in the region source of the page I have the following Javascript:
<script language="JavaScript1.1" type="text/javascript">
function f_P52_getAdrescode ()
var get = new htmldb_Get(null,&APP_ID.,'APPLICATION_PROCESS=P52_getAdrescode',0);
get.add('P52_POSTCODE',html_GetElement('P52_POSTCODE').value)
gReturn = get.get();
if(gReturn)
{ html_GetElement('P52_ADRESCODE').value = gReturn }
else
{ html_GetElement('P52_ADRESCODE').value = 'null' }
get = null;
</script>
and in the shared components of the application I have created an process P52_getAdrescode as follows:
declare
l_adrescode varchar2(16);
begin
l_adrescode := :P52_POSTCODE || :P52_HUISNR ;
if :P52_HUISNRTOEVOEGING is null then
NULL ;
else
l_adrescode := l_adrescode ||':'||:P52_HUISNRTOEVOEGING ;
end if ;
htp.prn(l_adrescode);
-- dbms_output.put_line(l_adrescode);
end;
I ran this PL/SQL in the SQL-section of HTMLDB and it does what a expect: combine the values in a new string.
In my page however, it only gets the value of postcode and puts this into the adrescode field.
So my question is: how do I modify the Javascript (I Guess) so that also the fields 'huisnummer' and 'huisnummertoevoeging' end up in the adrescode field?
Thanks for your help,
Jan.

Carl, Scott,
I have two pages with exact the same fields and codings (as described before in this Post.
I now have two different named functions and application processes, a javascript an process for each page. They both do the same thing, use the same code except for the page-number (:P52_ and :P92). I tried to make one process to replace both, but ran into problems when I changed the name in the get.add statement.
Changing the get.add from: get.add('P52_POSTCODE',html_GetElement('P52_POSTCODE').value) to: get.add('POSTCODE',html_GetElement('P52_POSTCODE').value) always ends up in what looks like a complete html-(source)dump of the page in the field that has to be updated. Even when I replace the :P52_POSTCODE in the application process as well Changing back the application process and the javascript to so that both javascript and process use the :P52_ again and the function returns the correct value again. What am I doing wrong?
I requested an online-workspace to post the application to it, but have no answer to my request yet, so I can't provide a working example at the moment....
Thanks for your help again,
Jan.

How do I combine two user accounts into one account?

When we originally set-up our iMac, I set-up two accounts for my wife and I. Since then it has been a royal pain with music and applications sharing. How do I merge the two accounts into one?

I found an answer to this by searching on "merging two accounts" rather than "combining two accounts." BTW, it's a little mini-nightmare if you only use "combine" on both Google and Apple support. At least this post might help others avoid the same fate.
Here's where to go to find the answer: http://discussions.apple.com/message.jspa?messageID=5629676#5629676

Can I combine two pdf files by using command lines?

Hi
I always need to combine two pdf files into one in my regular work
Currently, I open one of them, press ctrl+shift+I,
find another file and double click it.
It works but not so efficient since I need to do
this procedure many times everyday
So I'm looking for a better solution
Something like command lines,
for example:
acrobat.exe "combine" "doc1.pdf" "doc2.pdf"
Does acrobat have these functions or not?
Thx &
Best Regards

File > Combine

How can I combine two itunes accounts into one?

How can I combine two itunes accounts into one?

Items purchased from the iTunes Store are permanently associated with the account from which they were originally purchased. Apple provides no way to change this.
However, if you wish to put content from two accounts into a single iTunes library, you can easily do so. Use the command File > Add File (or Folder) to Library.

Is it possible to combine two existing iTune accounts and then cancelling one? Many thanks.

I am trying to combine two accounts that I have on iTunes (created separately over the years) so as to then delete/cancel one to only have one active account (with all of my combined purchases, etc. on this combined account).
Is this possible, or is there another way of transfering purchases to one of the accounts and then just deleting the then "empty" one?
Thanks for any advice / input

method one from the following support article should do the trick: How to use multiple iPods, iPads, or iPhones with one computer.

How do you combine two or more movie clips into one movie clip in iMovie '09

how do you combine two or more movie clips into one movie clip in iMovie '09

First create an iMovie project. Then drag the clips (or portions of clips) that you need into the project.
When finished, use the SHARE menu to share the project.

Wad reqt - Combining two individual charts

Similar Messages

Maybe you are looking for