WAD : Result set is too large; data retrieval restricted by configuration

Hi All,
When trying to execute the web template by giving less restiction we are getting the below error :
Result set is too large; data retrieval restricted by configuration
Result set too large (758992 cells); data retrieval restricted by configuration (maximum = 500000 cells)
But when we try to increase the number of restictions it is giving output. For example if we give fiscal period, company code ann Brand we are able to get output. But if we give fical period alone it it throwing the above error.
Note : We are in SP18.
Whether do we need to change some setting in configuration? If we yes where do we need to change or what else we need to do to remove this error
Regards
Karthik

Hi Karthik,
the standard setting for web templates is to display a maximum amount of 50.000 cells. The less you restrict your query the more data will be displayed in the report. If you want to display more than 50.000 cells the template will not be executed correctly.
In general it is advisable to restrict the query as much as possible. The more data you display the worse your performance will be. If you have to display more data and you execute the query from query designer or if you use the standard template you can individually set the maximum amount of cells. This is described over  [here|Re: Bex Web 7.0 cells overflow].
However I do not know if (and how) you can set the maximum amount of cells differently as a default setting for your template. This should be possible somehow I think, if you find a solution for this please let us know.
Brgds,
Marcel

Similar Messages

  • Result set is too large; data retrieval restricted by configuration

    Hi,
    While executing query for a given period, 'Result set is too large; data retrieval restricted by configuration' message is getting displayed. I had searched in SDN and I had referred the following link:
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d047e1a1-ad5d-2c10-5cb1-f4ff99fc63c4&overridelayout=true
    Steps followed:
    1) Transaction Code SE38
    2) In the program field, entered the report name SAP_RSADMIN_MAINTAIN and Executed.
    3) For OBJECT, entered the following parameters: BICS_DA_RESULT_SET_LIMIT_MAX
    4) For VALUE, entered the value for the size of the result set, and then executed the program:
    After the said steps, the below message is displayed:
    OLD SETTING:
    OBJECT =                                VALUE =
    UPDATE failed because there is no record
    OBJECT = BICS_DA_RESULT_SET_LIMIT_MAX
    Similar message is displayed for Object: BICS_DA_RESULT_SET_LIMIT_DEF.
    Please let me know as to how to proceed on this.
    Thanks in advance.

    Thanks for the reply!
    The objects are not available in the RSADMIN table.

  • Query Error Information: Result set is too large; data retrieval ......

    Hi Experts,
    I got one problem with my query information. when Im executing my report and drill my info in my navigation panel, Instead of a table with values the message "Result set is too large; data retrieval restricted by configuration" appears. I already applied "Note 1127156 - Safety belt: Result set is too large". I imported Support Package 13 for SAP NetWeaver 7. 0 BI Java (BIIBC13_0.SCA / BIBASES13_0.SCA / BIWEBAPP13_0.SCA) and executed the program SAP_RSADMIN_MAINTAIN (in transaction SE38), with the object and the value like Note 1127156 says... but the problem still appears....
    what Should I be missing ??????  How can I fix this issue ????
    Thank you very much for helping me out..... (Any help would be rewarded)
    David Corté

    You may ask your basis guy to increase ESM buffer (rsdb/esm/buffersize_kb). Did you check the systems memory?
    Did you try to check the error dump using ST22 - Runtime error analysis?
    Edited by: ashok saha on Feb 27, 2008 10:27 PM

  • Result Set Too Large : Data Retrieval restricted by configuration

    Hi Guys,
    I get the above error when running a large dataset, with a hierarchy on - but when I run without a hierarchy I am able to show all data.
    The Basis guys increased the ESM buffer (rsdb/esm/buffersize_kb) but it still causes an issue.
    Anyone any ideas when it comes to reporting large volumes with a hierarchy?
    Much appreciated,
    Scott

    Hi there
    I logged a message on service marketplace andg got this reply from SAP:
    ' You might have to increase the value for parameters
    BICS_DA_RESULT_SET_LIMIT_DEF and BICS_DA_RESULT_SET_LIMIT_MAX as it
    seems that the result set is still too large. Please check your
    parameters as to how many data cells you should expect and set the
    parameter accordingly.
    The cells are the number of data points that would be send from abap
    to java. The zero suppression or parts of the result suppression are
    done afterwards. As a consequence of this, the number of displayed
    data cells might differ from the threshold that is effective.
    Starting with SPS 14 you get the information how many data cells are
    rejected. That gives you better ways to determine the right setting.
    Currently you need to raise the number to e.g. 2.000.000 to get all
    data.
    If BICS_DA_RESULT_SET_LIMIT_MAX is set to a lower value than
    BICS_DA_RESULT_SET_LIMIT_DEF, it would automatically cut the value of
    BICS_DA_RESULT_SET_LIMIT_DEF down to its own..
    Please note that altough this parameter can be increased via
    configuration, you should do a proper system sizing according to note
    927530 to ensure that the system can handle the number of users and
    resultset sizes you are expecting."
    Our basis team have subsequently apllied these changes, and I will be testing today.
    Thx

  • SAP Note: 1127156 Result set is too large

    Hi,
    The note 1127156 explains how to resolve the issue with removing the message "Result Set is too large." I want to check the settings in the template and it gives the following steps but i cannot find the settings on the Analysis web item of the data provider.
    Can someone pls help.
    Query View
    The following steps describe how to change the "safety belt" for Query Views:
    1. Use the context menu Properties / Data Provider in a BEx Web Application to maintain the "safety belt" for a Query View.
    2. Choose the register "Size Restriction for Result Sets".
    3. Choose an entry from the dropdown box to specify the maximum number of cells for the result set.
                   The following values are available:
         Maximum Number
         Default Number
         Custom-Defined Number
                   Behind "Maximum Number" and "Default Number" you can find the current numbers defined in the customizing table RSADMIN (see below).
    4. Save the Query View and use it in another Web Template.
    Many thanks

    Hi,
    I was facing the same issue in BEx analyzer 7.0. The query was working fine in BW 3.5 analyzer but gave error in BEx 7.0.
    When executed in web, it gave error result set is too large.
    The maximum no of cells that can be displayed is 750000.
    Please check the result set returned by the query. Also check note Note 1040454 - Front-end memory requirement of the BEx Analyzer.
    Some enhancement are planned to be delivered in enhancement package 1.
    Regards,
      Niraj

  • Essbase Error:Set is too large to be processed. Set size exceeds 2^64 tuple

    Hi,
    we are using obiee 11.1.1.6 version with essbase 9.3.3 as a data source . when I try to run a report in obiee, I am getting the below error :
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 96002] Essbase Error: Internal error: Set is too large to be processed. Set size exceeds 2^64 tuples (HY000)
    but if I run the same query in excel add in, I am just getting 20 records . wondering why I am getting this error in obiee . Does any one encountered the same issue ?
    Thanks In advance,

    Well if you want to export in I think you have to manually do it.
    The workaround it to open your aperture library by right clicking it and show contents...
    Then go into your project right click show contents...
    In here there are sub folders on dates that the pictures were added to those projects. If you open the sub folder and search for your pictures name it should be in that main folder.
    You can just copy it out as you would any normal file to any other location.
    Voila you have manually exported out your file.
    There is a very similar post that has been close but again you can't export the original file that you are working on - FYI http://discussions.apple.com/thread.jspa?threadID=2075419

  • SAP adapter giving the merged result set (First RFC call data + Second RFC call data) for second RFC call

    I have a WCF Adapter service to call a SAP RFC. When I call the RFC first time, it gives me correct no of result set but when I call this RFC second time immediately after first call, it gives me merged result set (First Result set + Second Result Set).
    e.g. We have a RFC which receives vendor number and blank object of result set as parameter and gives back the list of purchase orders as Response in object of result set for that vendor.
    Suppose, we have a vendor "a" and vendor "b". For vendor "a" there are 5 purchase orders and for vendor "b", we have 4 purchase orders in SAP. When I call the WCF adapter service for this RFC for vendor "a",
    it gives me 5 purchase orders. Immediately after first call, when I call WCF service for vendor "b", it gives me 9 (5+4) purchase order records which is wrong.
    In brief, one RFC call is affected by its previous call.
    For each new WCF request, a new object of result set is created, connection is opened, rfc is executed and connection is closed.
    Can anybody have any idea on this?
    Thanks.
    Thanks, Nishant Gupta

    Hi，
    Please refer to the document
    http://seroter.wordpress.com/biztalk-and-wcf-part-vii-about-the-biztalk-adapter-pack/

  • Trying to send vid clip results in "file too large". Yet friends can send me clips larger. Why is this?

    I cannot send video clips I have taken to friends.  I get "File too large". Yet friends seem to be able to send ME larger clips from their phones.
    Do they have some app or something that zips or compresses files automatically?

    Try reproducing the issue in Windows safe mode with Networking.... I think the guess of a synchronization issue was correct. I just think the blame finger went to the wrong place. Windows safe mode should confirm my guess... Or prove me wrong
    Note that i can move messages in imap to live from junk to inbox and they are not corrupt.

  • User function result value was too large

    OH sorry, it is me again.
    apart from creating the index for the oracle text,
    i tried to do simple select statement for the searching in the shredded XML view table.
    select CTITLE, ETITLE, ID, CCAPTITLE, ECAPTITLE, CAP_ID
    from ORD_VIEW
    where ENGLISH_CONTENT LIKE 'marrige';
    the ENGLISH_CONTENT contains the law documents.
    and i have about 800 of XML documents (1 CTITLE for 1 document),
    each document has a number of CCAPTITLE tables.
    i know it is very large to obtain,
    then what can i do to deal with this?
    i want to use the score(1) to rank them.
    but without the index for this view table, how can i do that?
    Edith

    OH sorry, it is me again.
    apart from creating the index for the oracle text,
    i tried to do simple select statement for the searching in the shredded XML view table.
    select CTITLE, ETITLE, ID, CCAPTITLE, ECAPTITLE, CAP_ID
    from ORD_VIEW
    where ENGLISH_CONTENT LIKE 'marrige';
    the ENGLISH_CONTENT contains the law documents.
    and i have about 800 of XML documents (1 CTITLE for 1 document),
    each document has a number of CCAPTITLE tables.
    i know it is very large to obtain,
    then what can i do to deal with this?
    i want to use the score(1) to rank them.
    but without the index for this view table, how can i do that?
    Edith

  • Error message: Translation result in VEB too large

    Our local currency is ANG (Antillean Guilder). As a subsidary of a Venezuelan Company the system has been configured to perform an automatic translation in the background to VEB. You do not notice this process, untill you receive the error message stated in the title, because the digits of the calculated VEB amount exceed the maximum length of the field.
    How to enlarge the field in order to avoid this error?

    I have managed to resolve this problem by deactivating the Special Ledger in question.

  • Result set too large in BI report; Safety belt settings in WAD

    Hello All,
    When we run a BI report, the error " Result set is too large; data retrieval restricted by configuration" appears. We did a search on SAP portal and found the SAP note 1127156, whics recommends the configuaration of safety belt to limit memory used.
    Acoordingly the cust table RSADMIN has been configured. But on the web template side, we need to configure the changes as well. The note says:
    "1. Use the context menu Properties / Data Provider in a BEx Web Application to maintain the "safety belt" for a Query View.
    2. Choose the register "Size Restriction for Result Sets".
    3. Choose an entry from the dropdown box to specify the maximum number of cells for the result set.
    The following values are available:
    Maximum Number
    Default Number
    Custom-Defined Number
    Behind "Maximum Number" and "Default Number" you can find the current numbers defined in the customizing table RSADMIN (see below).
    4. Save the Query View and use it in another Web Template."
    I am trying to locate these options in the context menu in Web Applications designer but in vain.
    Can anyone help...

    This option is not available in WAD, it will be available when you run the web template under settings, Data Provider for the standard template 0ANALYSIS_PATTERN.
    If you have a custom template you will have to use the Dataprovider settings web item in your custom template to change the values during runtime.

  • BW Web Report Issue - Result set too large

    Hi,
    When I execute a BEx Query on Web I am getting “Result set too large ; data retrieval restricted by configuration (maximum = 500000 cells)”.
    Following to my search in SDN I understood we can remove this restriction either across the BW system globally or for a specific query at WAD template.
    In my 7x Web template I am trying to increase default max no of rows parameters, As per the below inputs from SAP Note: 1127156.
    But I can’t find parameter “Size Restriction for Result Sets” for any of the web items (Analysis/Web Template properties/Data Provider properties)….in the WAD Web template
    Please advise where/how can I locate the properites
    Instructions provided in SAP Note…
    The following steps describe how to change the "safety belt" for Query Views:
    1. Use the context menu Properties / Data Provider in a BEx Web Application to maintain the "safety belt" for a Query View.
    2. Choose the register "Size Restriction for Result Sets".
    3. Choose an entry from the dropdown box to specify the maximum number of cells for the result set.
                  The following values are available:
    o Maximum Number
    o Default Number
    o Custom-Defined Number
                  Behind "Maximum Number" and "Default Number" you can find the current numbers defined in the customizing table RSADMIN (see below).
    4. Save the Query View and use it in another Web Template.
    Thanks in advance

    Hi Yasemin,
    Thanks for all help...i was off couple of days.
    To activate it I can suggest to create a dummy template, add your query in it, add a menu bar component add an action to save the query view. Then you run the template and change the size restriction for result set then you can save it by the menu.
    Can you please elaborate on the solution provided,I created dummy template with analysis and Menu bar item...i couldn't able to configure menu bar item...
    Thanks in advance

  • Result set too large

    Hi Experts,
      When I run BI report on SAP portal, it shows me the message : Result set too large...., I had changed BICS_DA_RESULT_SET_LIMIT_MAX and BICS_DA_RESULT_SET_LIMIT_DEF, but I don't know how to(and where) config "safety belt", somebody can teach me that!? thanks a lot!

    Note 1127156 - Safety belt: Result set is too large
    Oops too late...!!! did not see earlier reply
    Edited by: Arun Varadarajan on Jul 6, 2010 9:31 PM

  • BEx Broadcaster configuration - maximum number of cells in result set

    Hi all,
    I've got an error message when runnig a BEx Broadcaster setting to send query output as xls file.
    Query was running, but empty xls sheet was sent.
    Message was: result set to large (1.5 Mio cells); data retrieval restricted by configuration (maximum 1 Mio cells).
    How can this configuration be changed to enable 1.5 Mio cells ?
    Many thanks
    Andreas

    This is excel restriction for maximum of 1million cells. If you split the query with smaller results set lesser than 1 million cells, this error will not come.

  • How to handle large result sets?

    Hi All,
    I have a large result set to be displayed to user using jsp's. Problem is that result set is too big, so I can't display all the records in a single push. I want to show the results page by page say 25 per page. Now for every page I have to fetch data from database, means there are going to be many database calls which is not advisable. Or i can cache data in a CachedRowSet to reduce database calls, but in this case you have to store all the data in memory which is not a good solution in case you have very large data sets. Can anybody suggest me a solution to this problem?

    The best thing for you to do is to implmeneting paging logic in conjunction with a scrollable resultset (JDBC 2.0+).
    The logic would go like this assuming 30 rows per page:
    - keep track of which page the user is on (e.g. page 3)
    - issue the full sql
    - scroll thru only the rows in the current page (e.g. rows 90-120)
    - copy the page's rows to value objects
    - close the resultset, statement, and connection
    In the above example, you would scroll to row 90 using rs.absolute(90).
    The efficiency comes from the fact that you're using a scrollable resultset. By using this, only the rows that you scroll thru are extracted out from the database. I performed some simple testing and with my data, and the scrollable resultset was about 10x in performance.
    Good luck!

Maybe you are looking for