Waiting time between entry posting in R/3 and avail. in BW

Dear SAP community,
We have set up a process chain which gives us the freedom to load GL account into BW on an ad-hoc basis.
Unfortunately it is not really ad-hoc after we have posted an entry in GL account in R/3 we need to wait approximately 1 hour before we run process chain in order to see posted entry. If we run process chain immediatly after posting entry we woul not see the entry in BW.
Does anyone knows if there is a waiting time from when we post an entry into SAP R3 to when we can run the process chain and see the posting in BW?
Thanks a lot for you help.
Stefanie

Hi Stefanie,
What is the Datasource being used?
For old GL extractors, like 0FI_GL_4, there is a safety interval upper limit of 1 day, meaning data posted till yesterday will be extracted if the chains run today. There are workarouds given by SAP to extract most recent data for these.
For new GL extractors like 0FI_GL_10, there is a safety interval lower limit of 1 hour, meaning the most current data would be extracted and there would be an overlap of 1 hour between delta loads and some records are extracted twice.

Similar Messages

How to keep waiting time between processed messages !!

Hi Folks,
I have got one scenario required waiting time between processed messages. The problem as follows !!
File --> Proxy scenario. I receive 15 messages from sender side (same messages structure) so working with one interfaces. File picking and transforming this message and split into 2 messages. messages are receiving to receiver. I am using BPM with 7,8 steps like receiving step, block , message transformation step , internal block 1 for sender 1, internal block 2 for sender 2.
All things are working fine, messages are going to receiver properly. But customer requirement is , wait step required between processed messages before sender1. I have put wait step still, PI picks all messages in one shot processing and waiting for 2 minutes, after 2 minutes sending all messages at the same time, this process is not working.
I have tried with wait step in mapping (Sarvesh) given excellent idea, still PI works the same way.
Can someone please explain a bit why the messages or not waiting message by message. I am using EOIO with Queue name and file process mode "BY NAME" and I have tried "BY TIME" as well. I have given priority to this Queue. On BPM Queue assignment : One Queue.
Please I am expecting positive answer !!
Many Thanks in Advance
San

Hi Rudolf Yaskorski ,
Not sure about your PI release and BPM model, do you create separate process instance for each file, or do you process files collecting them in one single instance? Are you using parallelization within your ccBPM ?
I am using serialization, I don't think bpm can do Parallization until PI 7.0, but PI 7.11 has got has queue assignment. But I am using one queue. This must be serialization.
To me it looks like your issue is not in ccBPM but rather more in polling files (as per your post file CC polls all 15 files in one shot). So if you wish to poll the files not at the same time some workaround is required. Possible options you could check out:
A. Either implement "wait" in your mapping based on file name or other criteria (e.g. directory name). Check out if respective BPM instances are really created at different times.
I have used wait step in mapping. These 15 messages has to go through one interface. So I am using one interface. But I have checked mapping process time in all messages on receiver system. Shows same timing, even though I put 40000 ms waiting time in mapping.
B. Try polling different files (or use different directories) with different channels and coordinate starting / stopping of your channels by scheduling availability for each CC in RWB. E.g. you poll file 1 with CC 1. You start 2 minutes later CC 2 and poll file 2. And so on.
I am not clear about this . On BPM waiting step is working and it keeps wait all messages, which are coming through one interface. Then it releases all messages at the same time.
I don't know how to resolve this. I have tried with Transport acknowledgment, but all messages are going to reciver system waiting at receiver system in priority queue and processing in EOIO, but taking so long. Rather all messages go and sits in queue, I want to stop messages by message with 2 minutes time gap. How please?
Kind Regards
San

Wait time between DTP and InfpoPackage

Dear All,
Is it possible to set a constant / dynamic delay / wait time between a DTP and infopackage. I've following scenario in my PC:
DSO --> DTP --> Open Hub Destination (AppServer-Folder) --> InfoPackage --> Flat File DS
Regards,
Ender

Hi Ender,
There is a easy way to do this .
Go to PC ->edit mode ->right click on process ->Debug loop ->it will ask for waiting time in seconds .
For some of the processes it shows option wait in place of debug loop.both are same .
Hope this will be helpful .
Regards,
Jaya

Offsetting entry posting for 501/502 and 505/506 movement types

Hi,
In our configuration the single account is defined for ZOB account modifier group for GBB offsetting entry transaction key for all the valuation classes. Goods movements using 501/502 or 505/506 movement types for the materi
How can we configur account for material consumption based on material types after defining new GL account codes.
Regards

Thank you for the lightning fast response and for the confirmation, Chris.
Chris Cox wrote:
…it's in Carbon, so Apple won't be interested in fixing it...
…especially since it's in Tiger, three Mac OS X versions back.
Which leads me to a question regarding CS4 performance on a G5 Quad in Leopard vs. Tiger, which I'll post on the Photoshop forum…
Thanks again.

Relation between RFC time and Roll wait time

Hello
What is the relation between RFC time and Roll wait time?
In a diagram from E2E100 training I took recently the relationship is made out to be:
RFC+CPIC = some processing time + Roll wait time
Something like this
Processing----
Roll wait-------
Roll in
RFC+CPIC----
In the diagram I saw it shows that roll out occurs during processing.
Assumming that the user context rolls out and then rolls in again, wouldn't "Wait" time occur when the request comes back and the dispatcher has to assign the request to a work process?
Is this wait time calculated as "Wait" time or is it calculated as "Roll wait" time?
I was forced to think about this because of a STAD record I have with high Roll wait time, but with low RFC time as well as zero GUI time. If "Wait" time when the request comes back from RFC is included in "Roll wait" then it might explain what i'm seeing.
Kind regards,
Peter

Hello Santosh,
Thank you for your reply.
I would like to know how time spend in the dispatcher by a request coming back from an RFC is calculated.
When the RFC is made the user context is rolled out of the work process so the work process becomes free. When the RFC comes back it has to be assigned to a new work process. This means that a bit of time would need to be spent in the dispatcher. Would this time be measured as "wait" time or is it part of "Roll wait time?
From the definition you gave of "Roll wait time", "it is the time dedicated by the R/3 system to waiting for the return value of an RFC call plus the CPIC time required to create the connection for that RFC to an outside system", one would think that the time spent in the dispatcher by a returning RFC would be measured as "wait time" the same as when the dialog request first comes in from the front end. I've never seen a diagram that explained this satisfactorily.
Kind regards,
Peter

Keyboard Delay - Low Frequency - Waiting time DV7

Well, i have a little problem here, i use a DV7-6195us HP Pavilion.
I recently did a format on the pc, during the process of reinstalling drivers (the official website of HP) appeared a problem ... my keyboard got a huge delay (~ .5 sec). I would like to know the source of this problem. If anyone has suggestions, please help.
I've tried: Accessibility features, Keyboard Driver, Update BIOS, Settings frequency of the Control Panel.
I believe that the problem appeared after updating the Bios, for so if anyone knows which version is BIOS manufactures default pls tell-me, I am grateful.
For more info this is My computer

Well... i already try:
1- Uninstall keyboard driver n let windows install it with a default keyboard 101-keys
2- Update keyboard driver with a IBM Enhaced keyboard 101-keys (aida32 )
3- Disable all windows features of keyboard helper.
4- Install all drivers from HP-US oficial website
5- Update BIOS to version F.14, F.1A, F.1B (current)
6- Install the HP essentials update software for windows 7
7- Test the keyboard in SafeMode to check if the problem perssist.
8- Multiple Reboots.
9- Full scan with AVIRA FREE antivirus.
The problem continues to occur even after all tests.
One time after a reboot, keyboard miraculously returned to work perfectly, however, after some hours on the system fell into a BlueScreen and after the reboot the problem returned.
in truth the problem first appeared just after a blue screen.
this reinforces my theory about the BIOS update, noting that before the problem appears for the first time, I was using version of the BIOS F.1A
I dunno whot to do.
Maybe do a thorough cleaning to avoid bad contact.
Maybe make the replacement of the keyboard.
Remembering that absolutely all keystrokes and keyboard functions work perfectly ... the only problem is the waiting time between a letter and another.

Database Wait time calculation.

Hi i am using 10.2.0.4.0 version of oracle.
I need to find the total wait times for each days for each WAIT_CLASS and need to plot the trends in past days. i am using below query for getting the details, but my results are not matching with the ones i am getting in the AWR report. In my daily AWR report, 'USER I/O' is coming at highest time taking wait class, where as in my query i am getting 'Application' on highest wait section. Also the total wait times comes different. Can you please help me to understand, what am i missing in the query?
SELECT wait_class,
     TO_CHAR (MIN (s.end_interval_time), 'DD-MON-YYYY DY HH24:MI')
         sample_end,
        SUM (WAIT_TIME + time_waited) waittime
FROM dba_hist_active_sess_history q, dba_hist_snapshot s
WHERE   s.snap_id = q.snap_id
      AND s.dbid = q.dbid
      AND s.instance_number = q.instance_number
      AND s.end_interval_time >=
             TO_DATE (TRIM ('16-Oct-2012 '), 'dd-mon-yyyy hh24:mi:ss')
      AND s.begin_interval_time <=
             TO_DATE (TRIM ('18-nov-2012 '), 'dd-mon-yyyy hh24:mi:ss')
     AND wait_class in ('User I/O','System I/O','Concurrency','Commit','Other','Configuration','Network','Application','Administrative')
GROUP BY trunc(s.end_interval_time),wait_class
ORDER BY trunc(s.end_interval_time),waittime desc

Thanks. I executed the below query and got the results for the same duration as in my AWR report, i.e '02-Nov-12 00:10:14' to '02-Nov-12 16:50:40' but i am wondering the trend of wait times as per each class are comparably similar but nos i.e. SUM(time_waited) are different in both the cases(AWR and below QUERY), they are not exact match. Why am i getting this difference?
SELECT wait_class,
       --TO_CHAR (MIN (s.end_interval_time), 'DD-MON-YYYY DY HH24:MI'),
       trunc(s.end_interval_time),
        SUM(time_waited)
FROM   dba_hist_service_wait_class dhswc
       , dba_hist_snapshot s
where    S.SNAP_ID = dhswc.snap_id
AND wait_class in ('User I/O','System I/O','Concurrency','Commit','Other','Configuration','Network','Application','Administrative')
AND s.end_interval_time >=
             TO_DATE (TRIM ('02-Nov-12 00:10:14'), 'dd-mon-yyyy hh24:mi')
      AND s.begin_interval_time <=
             TO_DATE (TRIM ('02-Nov-12 16:50:40'), 'dd-mon-yyyy hh24:mi')
GROUP BY Trunc(end_interval_time),
          wait_class
ORDER BY Trunc(end_interval_time),
          wait_class;Edited by: 930254 on Nov 8, 2012 8:01 AM
Edited by: 930254 on Nov 8, 2012 8:05 AM

How to manage wait time in between pages loading

Hi,
Could you please help me "How to manage wait time in between pages loading while playback script using etester?
Thanks,
RJ.

RJ
You can edit the think time in eTester by:
Expand the tree node and right click on the address bar to select Address Properties, you can then edit the text box called Delay Before PlayBack
If you like to specify think time between actions instead of action groups: right click on the actions ans select properties, there are 2 text boxes in the new window; one for milliseconds and the other for seconds
Hope this helps
Alex

DEQUEUE with FOREVER wait time hangs Oracle when there is no entry to be dequeued

I am using a multiconsumer queue and whenever I try to get the next message from the queue with the FOREVER wait time or a wait time greater than 0 and there is not entry in the queue to be dequeued, Oracle seems to hang for a couple of seconds. This time can go from 2 seconds and more than 30 seconds.
During that hang time, I cannot even create a new connection to Oracle, run a query in another session. Everything seems to be hanging. At the same time the machine is mostly idle during that time.
This hang time comes and goes until a message is available to be dequeued or the dequeue call returns when its wait time has elapsed.
Here is the code I use to dequeue the next message with wait time FOREVER from the default.
=============================================
DECLARE
msg_queue_msgid msg_queue_tab.msgid%TYPE;
q_opts DBMS_AQ.dequeue_options_t;
msg_opts DBMS_AQ.message_properties_t;
data msg_queue_t;
BEGIN
q_opts.consumer_name := 'ROUTER';
DBMS_AQ.DEQUEUE (queue_name => 'msg_queue',
dequeue_options => q_opts, message_properties => msg_opts,
payload => data,
msgid => msg_queue_msgid);
END;
=============================================
Is this related to Oracle configuration or anything special has to be done to use AQ?
null

In which mode your database server is running? Probably if its in dedicated mode it will hang u can check it by changing the database mode.
null

FI doc post (IDoc FIDCCP02 - One Time Vendor entry)

I am posting an FI document and entering a one time vendor. In segment E1FISEG, field HKONT I enter 'ONETIME' (one time vendor). In segment E1FISEC, I enter the one time vendor info. When I create the IDoc, I get error 'No account specified in item 0000000001'. Any idea where this account comes from? It works fine when I create an FI doc with a one time vendor using trans FB01 manually.

Hi Ray,
what's about struc. E1FINBU
and field E1FINBU-LIFNR ?
i think you do'nt fill E1FISEG-HKONT for vendor-line!
regards Andreas

Can we create two "TS17900100" tasks in one WF to update IT with Wait time

Hello Folks ,
I have scenario in which I have to update two infotypes but with some wait time . I have created to form scenarios and attached those scenarios in my WF binding one by one .
I have two WF TS17900100 task * first one has scenario update_1 and has wait time and also has approval in between .
For my other WF TS17900100 task , I have scenario update_2 as well as approval .
What is the issue .
It is update Infotype but creating 2 records because of the reason I am executing u201CTS17900100u201D task twice. But my question is it has the different form scenario inside with different set of fields which I selected back in u201CDesign time u201C .
Any idea how to get rid of double entries . Note: per my requirement I need a wait time in between process .
Thanks.
Khan

I am doing it already !!
Thanks .
Khan
Check out http://www.aspirehr.com/dynamicforms/

Wait Time / Timeout Time in waiting events

Hi,
From manual, I came to know that some of waiting events having wait time or time out duration. I have not understood, what happens if it has reached timeout. What happens next ? ( Will you explain in more detail ). It saysl it will renew wait event. ( I have not understood what does mean "RENEW", Or what steps will be taken by Oracle, what happens if again reached timeout ) ?
Thanks for clearing my doubt in detail.
regards
pjp

Please read the FAQ and learn how to enclose your listings in tags so we can read them.
I can't help you at this time because I can not read what you posted.

Recepient type not updating in entries posted through F-54

We have a scenario as follows
1. First we have made advance payment to vendor through F-48 with TDS posting.
2. We received 4 bills against these advance payment and we booked these bills with TDS posting.
3. We have used F-54 T-Code to nullify the TDS effect in FB60 and to process open item of FB60 against the advance payment through F-48.
Now it working fine while open item clearance ( there is 1Re.diff which we are rounding up).
But while making TDS payment through J1INCHLN two of the entries posted through F-54 ( KA Documents ) are not getting picked up as a result there is differenc between total TDS payable & what is shown in J1INCHLN open items.
On checking in WITH_ITEM table it is found that Receipent type is not updating for these particular entries.
Additional observation : we have three tds codes for basic, surcharge & E cess and three seperate line items are generated for each while posting TDS. It is observed that for these particular invoices as the amount is in hundreds the E cess amt is less than Re.1 so the only two line items are created i.e. Basic & Surchage.
Please guide us for solving this.
Thanks & Regars,
Chandrakant

Hi,
You have to check two tables :
T059C for Receipient types for country IN whether all the WH Types are maintained for CO and OT.
V_T001RWT - WHT Rounding Rules - normally it will be 100 for INR (min Re.1) you may have to change it.
Regards,
Sadashivan

TDS DEDUCTING TWICE AT THE TIME OF ADVANCE POSTING AND AT THE TIME OF INVOg

HI ALL
I HAVE AN ISSUE TDS DEDUCTING TWICE AT THE TIME OF ADVANCE POSTING AND AT THE TIME OF INVOICE POSTING
AT THE TIME OF ADVANCE POSTING F-48
ENTRY IS
VENDOR     DR     30000
BANK          CR     2900
TDS          CR     300
AT THE TIME OF INVOICE POSTING-FB60
THE ENTRY IS
EXPENSE     DR     30000
VENDOR     CR     29700
TDS          CR     300
SO TDS HAS BEEN DEDUCTED TWO TIMES
AT THE TIME OF DOWN PAYMENT CLEARING u2013F-54
THE INVOICE ENTRY SHOULD BE REVERSED AS
VENDOR     DR     29700
TDS          DR     300
VENDOR SPL CR      30000
BUT IT IS NOT REVERSING WHILE CLEARING DOWN PAYMENT AT F-54
FOR THIS I MADE THE CONFIGURATION FOR DOWN PAYMENT IN WITH HOLDING TAX TYPE FOR PAYMENT.HERE I ACTIVATED u201CCENTRAL INVOICE PROu201D
THOUGH IT IS NOT REVERSING THE ENTRY OF INVOICE POSTING AT THE TIME OF DOWN PAYMENT CLEARING AT F-54.
SO WHAT COULD BE THE PROBLE . IF YOU KNOW PLEASE TELL ME THE SOLUTION
I WILL BE GREATE THANKS TO YOU
REGARDS
RAM

Hi All
I Have an issue with TDS.
At the time of down payment clearing th invoice amount is not reversing..what are the settings I need to check
Actually
At the time of Advance Posting the entry is----
VENDOR     DR     30000
BANK          CR     2900
TDS          CR     300
At the time of Invoice Posting theentry is -
EXPENSE     DR     30000
VENDOR     CR     29700
TDS          CR     300
At the time of Down Payment Clearing in t code F-54 the invoice entry should be reversed as -
VENDOR     DR     29700
TDS          DR     300
VENDOR SPL CR      30000
But system not reversing while clearing down payment in t code F-54 and the system posting entry is as----
VENDOR DR 30000
VENDOR SPL   30000
So what is the mistaken has been done by me .If you any idea please let me know. I will be thankful to you.
Thanks&Regards
Ram

Clear Down Payments at the time of Invoice Posting

Hi,
At the time of invoice posting (customer/vendor) we will a message on exsting down payments. Is it possible to link the down payment with current invoices??   Please let me the possibilities.
Thanks
Partha

Down payment flow- first we have creatw the sundray creditors nad Advance sundray creditor gl a/c dreation
2.the link bet sundry creditors and advance sundray creditor in OBYR.
3. and posting the f-48 advance to vendor
                             f-43 posting invoive
                             f-58 transffer to specil gl a/c to normal gl/a/c
                             f-44 clearing
and customer also same prosures and link between in sundry debtors and advance debtor and (obyx)

Waiting time between entry posting in R/3 and avail. in BW

Similar Messages

Maybe you are looking for