Want to cluster windows service without IP address

Environment
Two nodes configured clustered on windows2008R2
Query
I want to cluster windows service without IP address. Actually I want to cluster around 7 windows services but when we configure the service to cluster, it also ask to put IP address with it. But I dont want to access these services via IP addresses. I just
want to switchover these services. How could I do that.
Any comment will be appreciated. Thanks. Zahid Haseeb.

No, Its is not possible.
Without IP address, how will you access the services?
You need a dedicated IP address for each high availability service and application you are trying to configure.
See Dave's explanation for the below post
http://social.technet.microsoft.com/Forums/windowsserver/en-US/51231c5e-c890-4c9d-a6fc-3a4500c1992c/ip-address-allocation-in-failover-clusters-services-and-applications?forum=winserverClustering
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

Similar Messages

I want to install windows 8 without bootcamp ...

So here is what I did step by step:
1. make partition via disk utility and format using MS-DOS / FAT
2. Insert windows cd and restart
3. Hold C when it's booting up
4. It goes right away to windows installation, and when I see my partition, I choose the partition i made from disk utility
5. On the "where do you want to install Windows" menu (with many partitions on the screen where you supposed to choose which one to install windows), I can't install windows yet, so I click Drive Options, then Format, but after I format the partition, I still can't click Next
Some said that I need to make the partition via disk utlity using NTFS, but I still can't install
It stucks on the "where do you want to install Windows" menu
Is it because the windows 8?
Or is it because Mountain Lion won't let you do this anymore?
All I want is to make 3 partitions since bootcamp limit only 2 partitions max.
I did successfully install windows 8 without any issue using bootcamp, but then again it was only 2 partitions.
I use VMware, and it takes your memory like crazy
*sigh*

I use VMware now, but it surely eats A LOT of memory
I can see that free memory is around 2GB, and after I hit VMware to run windows, memory left is around 30MB
Maybe I should buy another memory just for the sake of VMware?
I guess not, it's not worth it.
I really wish I can create triple partition like people taught out there on google.
But I can't make it happen

Install window services for managed server

hi all, i wanted to install window services for managed server. Can anyone advice me how to do it? My weblogic version is 10. Thanks in advance.

Hi,
Please refer to the following link....it might be helpful: http://weblogic-wonders.com/weblogic/2010/03/13/managed-server-as-windows-service/

Registering tnameserv as a windows service

Hi,
Could anyone help me on registering and starting tnameserv as a windows service.
Any help would be very very helpful.
Regards,
Hayath

Here is code I have written to do this. It is deployed using the wrapper utility (see http://wrapper.tanukisoftware.org), and I am including the wrapper config file that I use. You need to have the tnameserv.exe executable and tools.jar available - I simply deploy them in the same directory as the jar file I build form the cod below.
This may not be very elegant, but it works, and is in use on a daily basis in live newspaper publishing sites that use our software, so it works well.
Here is the code, which I provide as is with no liabilities etc.:
import java.io.*;
public class corbaasservice {
public static void main(String arguments[]) {
try {
String tnameservpath = "./tnameserv.exe";
if (arguments.length > 0) tnameservpath=arguments[0];
startCorbaThread(tnameservpath);
catch (Exception e) {
e.printStackTrace();
static SetantaThread setanta;
private static void startCorbaThread(String tnameservpath) throws IOException {
setanta = new SetantaThread(tnameservpath);
setanta.start();
class shutdowncorbaasservice extends Thread {
private SetantaThread setanta;
public shutdowncorbaasservice(SetantaThread s) {
setanta = s;
public void run() {
try {
Process tnameservProcess = setanta.getTnameservProcess();
tnameservProcess.destroy();
System.out.println("CORBA As Service interrupted");
catch (Exception e) {
e.printStackTrace();
// we do this to make it possible to start the program as a Windows Service without problems
// using a separate thread, prevents the service manager locking up if the startup time is too long
class SetantaThread extends Thread {
private String tnameservPath;
private Process tnameservProcess;
public SetantaThread(String path) {;
tnameservPath = path;
tnameservProcess = null;
public Process getTnameservProcess() { return tnameservProcess; }
public void run() {
int status = 0;
try {
System.out.println("CORBA As Service starting");
Runtime.getRuntime().addShutdownHook(new shutdowncorbaasservice(this));
tnameservProcess = Runtime.getRuntime().exec(tnameservPath);
status = tnameservProcess.waitFor();
catch (Exception e) {
e.printStackTrace();
finally {
System.out.println("CORBA As Service exiting with status: "+status);
Here is the wrapper configuration file I use. You can install the service by running the wrapper progam with this config file:.
wrapper.java.command=java
wrapper.java.maxmemory=128
wrapper.java.mainclass=com.silveregg.wrapper.WrapperSimpleApp
wrapper.app.parameter.1=corbaasservice
wrapper.java.classpath.1=./corbaasservice.jar
wrapper.java.classpath.2=./wrapper.jar
wrapper.java.classpath.3=./tools.jar
wrapper.java.library.path=.
wrapper.port=1777
wrapper.startup.timeout=300
wrapper.ping.timeout=300
wrapper.shutdown.timeout=300
wrapper.disable_shutdown_hook=TRUE
wrapper.request_thread_dump_on_failed_jvm_exit=TRUE
wrapper.ntservice.name=CORBAServices
wrapper.ntservice.displayname=CORBA Services
wrapper.ntservice.description=Provide CORBA Services for Java Applications
wrapper.ntservice.starttype=AUTO_START
wrapper.ntservice.process_priority=NORMAL
Hope this helps,
Colin Manning
Setanta-Media Limited

Install Windows service in vs 2010

I want to install windows service in Windows Server 2008 machine. For that do i need to install entire Visual
Studio 2010 or else .net
framework 4.0 is enough to install this service.

no need to install entire visual studio 2010 just install the framework.
visit following links it will help you to install
http://www.c-sharpcorner.com/Blogs/11155/
http://www.aspdotnet-suresh.com/2011/06/how-to-install-windows-service-using.html
http://stackoverflow.com/questions/8164859/install-a-windows-service-using-a-windows-command-prompt

HT4995 Internationally using Location Services without having data charges. What settings should use on my iPhone 5?

I'm traveling to Europe and I want to use Location Services without having data charges. What settings should use on my iPhone 5? I want to be able to use Trip Advisor City Guides Application to tour around cities for free. I have a Verizon International Plan for my trip, but it is still pricey. I would like to keep my iPhone cell services on for incoming calls, but I want to prevent international data charges. Thanks for your help!

You don't "choose" to use th 3g network.
If you have paid for it in your plan and 3g coverage is available, your phone will automatically use it when necessary.
3g provides faster internet speeds than 2g, so you can watch video or download stuff faster. Wifi is normally faster than 3g.
Your iphone gps is "assisted", meaning it uses network data to calculate your position.
Also, you would still need the network to download maps, directions etc as they are not on your device.

Installing Windows 8 without bootcamp (EFI)

It seems that Windows 8 supports EFI so I don't want to install it through bootcamp.
While installing WIndows 8 through DVD, at the final setup, error 'Windows cannot update boot configuration' arises.
Trying to repair, it says 'the drive is locked'.
Is there any way to solve this?

You still have to use Boot Camp or a virtual machine app to install Windows 8 - you can't just install it on the Mac OS X partition. If you want to use Windows 8 without using Boot Camp, try using Parallels 8 and create a virtual machine.
Clinton

Build and deploy windows service

I want to build windows service application through build definition and deploy it through Release Management.
Build definition creates _PublishedWebsites and no exe is created.
I believe Create service component in Release Management requires path (BinPath) where exe is located.
How can I achieve this? Please guide.

Hi N-SHAH,
I'd like to know whether you have build you windows service project successfully using TFS Build, and what's the version of TFS and Team Explorer(accompany with VS) you're using. If you cannot build the project successfully, please check the build
log. Make sure you can build before the deployment using Release Management. I use TFS 2013 Update 2 and have a try to build windows service project with TFS Build and it builds fine, the execution file can be generated normally.
When use Release Management for the deployment, you can create a Release template. Then set the build definition to the one that can build your project. And also configure path to package to point to drop location, add needed tools of "windows
service" to your release template to make it available for your deployment. Check this
page for more informatino about Release Management tools. And this
page for more info about Automate deployments with Release Management. And this
link
might help for managing your release.
If you don't want to use Release Management, you can also use TFS Build to deploy your windows service project. Check this
link for more information. Or using MSBuild and then integrate with TFS Build to do the deployment,
here
is the related process.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I want the cursor to be in the address bar when creating a new window; it works for new tabs and in a new private window, but not in safe mode.

I have tried following the advice offered in the few different threads I have found on this but nothing fixes it. I want the cursor to be in the address bar when I open a new window and/or when firefox opens without restoring a previous session. I fixed the issue for new tabs via about:config but this doesn't work for new windows. I tried safe mode and the problem persists. In new private windows the cursor is in the address bar.

The search box in about:home steals the cursor. Changing your home page to something else will cause the cursor to start in the address bar for new windows.

Apparently the default country for an account is US. I want it changed to Netherlands without having to call customer service. In need of assistance please.

Hi,
Apparently the default country for an account is US. I want it changed to Netherlands without having to call customer service. In need of assistance please, is there someone from Adobe on this forum who can help me? Or does someone know an email address?
thanks!
Arjan de Jong

Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html

I created an Apple ID for my daughter with her own gmail address, but I want her Apple ID and primary email address to be an iCloud email address. How can I do this? I can't set up an icould email address for her without first creating an Apple ID?

I have created an Apple ID for my daughter with her own gmail address as the primary email address, but I want her Apple ID and primary email address to be an iCloud email address. How can I do this? I can't set up an icould email address for her without first creating an Apple ID right?
I'm not good with computers so please explain in simple way...:)
I also wonder what the best way is to set up accounts for children in a family. I dont want them to be able to purchase apps etc through the parents accounts, also some things we like to share as a family and others we don't want to share. Is there any good. clear, simple explanation from Apple Support about these issues? Or best to go to Apple store and go to genius bar or one to one advise?
thanks

You can set up an iCloud account which makes the iCloud email address you choose the Apple ID and thus the login for it:
https://discussions.apple.com/message/22283348#22283348
though I have to say I think it's more sensible if the ID is another address, both for security reasons (so people don't know what the login is) and as a contact address from Apple if the account were to stop working and they needed to contact you. So personally I would to to System Preferences, enter the GMail address which is an ID, and then choose a nerw @icloud.com address.
If she has her own iCloud account she will need either her own computer or her own user account on your Mac to be able to make use of it. You should note that under Apple's terms of use Apple IDs are only available to children of 13 and over.
As to purchasing apps, this is nothing to do with iCloud: it's iTunes, and the login can be different. So you can all sign into the same iTunes account but have different iCloud accounts. Or she can have her own iTunes account if she is of suitable age (credit card needed for purchasing apps).
If you have other children you should be aware that any one Mac or device can create only three iCloud accounts - this is tied to the serial number, not the user account, and once reached cannot be bypassed. You can of course sign into an iCloud account created on another device.

Cluster and Windows Service

I have three machines running weblogic 6.0 in a cluster. One of the machine is an administration server. I wish to set Weblogic as a Windows service on each machine. The problem is managed servers can't start up until the administration server is fully started. Does this mean I have to start the administration server first and wait until it is fully started before I start the managed servers?

Hi,
I am not quiet understanding your question, could you clarify your question, as far as I know, an answer file is an XML-based file that contains setting definitions and values
to use during Windows Setup. In an answer file, you specify various setup options, including how to partition disks, the location of the Windows image to install, and the product key to apply. You can also specify values that apply to the Windows installation,
such as names of user accounts, display settings, and Internet Explorer favorites. The answer file for Setup is typically called Unattend.xml.
The related KB:
Building an Answer File
http://technet.microsoft.com/en-us/library/cc748874(v=ws.10).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SQL server Analysis Windows service Alerts on cluster nodes

Hi,
I was wondering if others may be experiencing the same issue with the SQL Server MP.
We are monitoring SQL server Analysis Service using monitor SQL Server Analysis Service Windows Service.
We had overrided “Alert only if service startup type is automatic”
option to false.
It will create the false alerts from the other nodes in the cluster on which service is not running, but since it's in clustered configuration, it should not generate alerts from other node as it's running on another node on the same cluster.
Please share if anyone has been through this issue and any remediation for this kind of issue.
Regards,
Daya Ram

Hi,
Here is a similar thread for your reference, in the thread, this issue has been confirmed as bug, and the poster provided a work arround for it, please try the work around:
Problem with the discovery of clustered SQL Server Analysis Services objects
http://social.technet.microsoft.com/Forums/en-US/ead946fd-38d1-4627-b60d-a5645d3627fb/problem-with-the-discovery-of-clustered-sql-server-analysis-services-objects?forum=operationsmanagergeneral
Hope this helps.
Regards,
Yan Li
Regards, Yan Li

How to install Window service for Managed Servers of a Cluster

Dear All,
          I am preparing a production setup consist of three machines A,B and C. Machines A is the Admin Server which hosts a cluster consist of two managed nodes. I intend to schedule both these nodes, targeted to two different machines (machines B node-b and machine C host node-c), as startup task on daily basis. I have no Node Manager running on machine A, but on machine B and machine C.
          I am only interested to schedule started task for node-b and node-c only. I need to know how to install the Windows services for the node-b and node-c since there are targeted on remote machines. Starting managed server as Win sevice works in the case of standalone managed servers but not sure when it comes to cluster setup.I appreciate if you can throw some light on this question.
          Thanks
          Kris

Krish,
          >Let say I gracefully shutdown both managed servers while >Admin is running. Do you think both these nodes while be >brought up ? I dont think they will come up.
          If you require an automatic restart when the managed server did not enter a failed state you can use the weblogic.Admin utility to ping the servers and kick off a server startup in the normal way with nodemanger see:
          http://e-docs.bea.com/wls/docs81/admin_ref/cli.html
          http://e-docs.bea.com/wls/docs81/adminguide/confignodemgr.html
          If your servers entered a failed state you can use weblogics self health monitoring.
          >Can we use JMX MBean to start managed servers ?
          Yes.
          As long as the nodemanagers are running you can start the managed servers using scripted commands using the weblogic.Admin class or your own java app using JMX.
          I think you may also be able to use WLST
          http://dev.bea.com/codelibrary/code/wlst.jsp
          hope this helps
          cheers
          Please see the
          Hussein Badakhchani
          www.orbism.com

Windows services for cluster monitoring

Hi there,
I need a list of windows services I need to monitor in a 2-node w2008 r2 cluster such as ClusSvc

Hi,
Please see if the following method helps:
Your MP Discoveries and Clustering
http://blogs.technet.com/b/authormps/archive/2011/03/13/your-mp-discoveries-and-clustering.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Want to cluster windows service without IP address

Similar Messages

Maybe you are looking for