Want to save a voice message someone left for me

hi
a friend left a funny voice message on my iphone, i would like to somehow save it as a file in my itunes.
is there some kind of way during sync or an app that will allow me to do that?
thanks

Yes, but they are all crude & half backed. I.E. use the line in on your mac while holding the phone close & playing the voicemail, exporting from QT pro, etc, etc.
If it's just one voicemail, they have a free trail period. Me, I use that little gem all the time.

Similar Messages

  • I want to save some voice messages.

    I want to permanently save some voice messages from my phone. I've been looking for an answer as to how I'm going to be able to do this. I want them saved on a different media so I can erase them off my phone.
    The voice messages are proof for something. Will I be able to download them to a thumb drive or even into my email somehow?
    I would appreciate any feedback.

    Are you using Verizon's voicemail system? If so, it will most likely cost you some money to have these messages saved.
    From Verizon's voicemail help pages
    "Can I have a permanent copy made of a Voice Mail message?Yes, permanent copies of your Voice Mail messages can be made in many ways but you can have CBW Productions, Inc. make a copy for you at a minimal fee. Go to CBW Productions and select the format you wish to use for your message archive. This is not a Verizon Wireless service and before any Voice Mail messages can be copied, you must register with CBW. If you do not have Internet access, you can contact CBW directly and place a phone order Monday through Thursday between 9am - 5pm EST and Friday 10am - 4pm at (800) 770-8046 or (877) 244-3222.Note: In order to have a copy of your message(s) made, you will be asked to provide CBW Productions, Inc. with your mobile phone number and Voice Mail password so they can access your mailbox. The message(s) you wish to have copied MUST still be present in your voice mailbox. If a message has already been deleted, it cannot be retrieved or copied. Your Voice Mail messages cannot be enhanced; therefore, any copies will be exactly what you hear in your mailbox; if the message that was left for you is garbled, the copy of the message will be as well. This archival service is not available for SMS (text) messages. CBW also provides Notary services for Voice Mail messages that are being archived.Back to top
    How much does it cost to have a message copied?Messages saved as MP3 files and delivered via email*
    Cost = $10.00 for the first message, and $5.00 for each additional message.
    *Due to firewall restrictions, etc., there is a limit of 10 messages per mobile phone number, and no more than 10 minutes recording time, per month for MP3 delivery. Orders will be processed within five business days from the time that the order is placed, excluding weekends and all holidays.Messages saved to CD or cassette
    From the time you place your order, your CD or cassette will be recorded and shipped to you within five business days, excluding weekends and all holidays.
    Number of Messages
    Cost
    1-3
    $18.00
    4-6
    $28.00
    7-10
    $38.00
    11-21
    $53.00
    22
    $58.00
    Each additional message above 22 messages
    $5.00
    Additional Information:
    All prices listed above include CD or cassette tape and do not include shipping. USPS First Class mail with Delivery Confirmation, USPS Priority Mail, USPS Express Mail & FedEx is available upon request and requires additional shipping charges.
    There is no longer a limit on how many messages we can record for a customer.
    Maximum recording time per cassette is 50 minutes; for CD is 60 minutes.
    Message recordings in excess of 60 minutes will incur additional processing fees of $100 per hour (billed in 15-minute increments).
    Notary letters = $20 per order (one notarized letter will be sent and will cover all messages archived as part of that order).
    Rush service is available for an additional cost of $20.00 which will place your order to be the next in line to be recorded, rush delivery options are also available for an additional cost."
    Of course, if you are using a different voicemail service such as Google Voice or Youmail, you can simply save the MP3 file.
    Another option would be to use a jack going from your phone to your computer to record the voicemail as it is playing on your handset.
    Good luck.

  • Burning Voice Messages to CD for Police - Please help me

    i've been getting some disturbing messages. the police want me to put them on a cd.
    is there a way that i can take the voice messages from my iphone and burn them onto a cd.
    please help. thank U!

    I don't know if there's another way, but the Missing Sync for iPhone backs up voicemails and text messages to their Notebook on your computer. I just tried it to make sure it worked the way I thought it would, and it does. You just click "export", it asks you where you want to export it to, and click "save". The file format is .amr (?), but it plays in Quicktime. Missing Sync isn't cheap, but it does work.

  • I want to save my SMS messages on my PC

    I know this sounds really silly, but I have still got all the text messages from when I first met me boyfriend 4 months ago. I think they are probably taking up a lot of memory on my phone now (as the 'other' bar shows as pretty full and I cant think of anything else that is using up) and so would like to delete them from my phone. I would like to save them to my PC though and on previous phones I have owned, it was possible (not to mention easy) to do this. Does anyone know how to do this without using third party software that you have to register with and pay for?

    You need 3rd party software. First back up the phone to your computer (NOT iCloud if you have updated to iOS5), then get an iPhone backup extractor program. http://bit.ly/s2dlrq

  • Master-detail raises Do you want to save changes

    Dear all,
    my form is of 1 master block and 3 details to that block, now whenever i tried to exit the form a Do you want to save changes? message is displayed but whenever i delete any one of the relations the message doesn't appear..
    plz any help is appreciated

    The problem is that some of the records are marjed as dirty - If you're not actually changing anything manually and you still get the error, then check that you've not got any POST-QUERY triggers updating DB fields or the use of LOV for validation which can also mark a record as dirty.
    You can of course supress / ignore the DYWTC message using EXIT_FORM(NO_VALIDATE) or similar, but you'lll probaly want to double check the cause of the record update first.

  • How do I deactivate my voice message

    I want to deactivate my voice message. How do I go about it. Thanks

    If you mean voicemail, text VM OFF to 150.

  • Is there a way to get voice messages to play through a stereo?

    I have a car stereo that I just plug my 5s right into. It's great for Spotify and podcasts and whatnot, but horrible for messaging.
    We'd been using Voxer for years for voice messaging, but it refused to play the messages through the stereo, so you'd have to disconnect it while driving, listen to the message, respond, then plug it back in and start everything back up again. Then, of course, whoever you were messaging would respond, and you'd have to repeat the process. The only alternative would be to *not* plug it back in and listen to music until the conversation was over, which isn't always easy to determine if you have talkative friends.
    The whole thing would go away, of course, if Voxer would play audio through the lightning port to the stereo. So when the voice messages were announced for the Messages app, I was *pumped*. Woo, no more disconnect/reconnect shuffle just to use voice messages.
    But it works the same way -- voice messages come out through the speakerphone on the phone, which is inaudible in my car. Is there any way to redirect the audio through the lightning port?

    There are a number of apps you can use to do this, a popular one is YouMail.

  • Is there anyone there? I hope there is someone who can you understand this problem and have the common sense to respond?  I open gmail. I want to save an email to one of my folders. I position my cursor over the appropriate Folder icon or by choice, to th

    Is there anyone there? I hope there is someone who can you understand this problem and have the common sense to respond?
    I open gmail. I want to save an email to one of my folders.
    I position my cursor over the appropriate Folder icon or by choice, to the Trash.
    The friendly finger pointing cursor icon changes to an arrow icon.
    The hand icon allows me flawless access to opening and/or moving emails.
    The arrow, however does not open the link.
    On the Google menu bar the cursor hand with finger opens the links to Everett (my name), Search, Images, Maps and Play.
    When I attempt to open the remaining links in the menu bar (YouTube, News, Gmail, Drive, Calendar and More) the arrow icon replaces the hand. The arrow icon does not work. It will not activate these links.  Nor does it open email messages in the Inbox.
    Usually I reset, even reboot Safire and sometimes the problem goes away, then reappears.
    Can you imagine if this condition should it happen to a tech savvy Google Support person? Perhaps one can share and make my problem go away.
    I am considering dropping Google as my mail source. Unfortunate!
    Everett Halvorsen
    [email protected]
    718.490.3824

    I have uninstalled my Access Connection, but this problem seems to persist. IBM technician have changed the wireless card of my T60, the first few days after it was changed was very fine, no problem at all. About a week later, the problem occured again, and it happened quite frequently after that occurence. Now i really have no idea what is the cause and how to solve it. Will be greatful if there is anyone that can help me.

  • How to enforce the message "Do you want to save changes?"

    Hello,
    How to enforce the message "Do you want to save changes?" when the user attempts to close a form after checking a non-database item (check-box).
    All the other database items in the block are not updateable and only viewable.
    After checking the non database item check-box, if the user tries to commit, then the system is saving the changes and call the appropriate procedure on save.
    But if the user tries to close the window without committing, the form is not showing the message "Do you want to save changes?" since the check-box is a non database item.
    How to enforce the message "Do you want to save changes?" in this scenario when the user tries to close the window?
    Thanks in advance.
    Cheers
    Sri

    This is a fairly common question in the forum. You will need to override the default exit form process and check to see if the checkbox is checked. You can do this in the Key-Exit trigger. For Example:
    DECLARE
      al_id     ALERT;
      al_button  NUMBER;
    BEGIN
      IF ( CHECKBOX_CHECKED('YOUR_BLOCK.CHECKBOX_ITEM') ) THEN
         /* Display an Alert here that asks, "Do you want to save changes?" */
         ...code here to set the properties of your alert...
         al_button := Show_Alert(al_id);
         IF ( al_button = ALERT_BUTTON1 ) THEN
            --YES
            /* Perform COMMIT Processing here...*/
         ELSIF ( al_button = ALERT_BUTTON2 ) THEN
            --No
            Exit_Form(NO_VALIDATE);
         ELSE
            --Cancel
            RAISE Form_Trigger_Failure;
         END IF;
      ELSE
         Exit_Form;
      END IF;
    END;If you need more help with the Alert, please check out the SHOW_ALERT topic in the Forms Help.
    BTW, what happens if all the user does is check the checkbox? No other changes have occured. What changes are you trying to process?
    Hope this helps,
    Craig B-)
    If someone's response is helpful or correct, please mark it accordingly.

  • Need some help in saving video message from viber to my Iphone. I disabled the thing that would save photos and videos automatically then, there comes a video I want to save. After loading and watching it, I press the "save to gallery"

    Need some help in saving video message from viber to my Iphone 5S with new ios 8's program . I disabled the thing that would save photos and videos automatically then, there comes a video I want to save. After loading and watching it, I press the "save to gallery" thing but it doesn't save in gallery. I tried all, restarting my phone, rebooting then turning on the save automatically thing and when I watch it again, it still wouldn't save.

    Probably a good question to ask Viber or look at their support site.

  • My iPhone was stolen in Asia and it's now in Germany. How do I get it back? All I have left is a serial number, apple ID and password, plus a police report. What do I do now? I really want my phone back. Can someone help me? Thank you, Bobi

    My iPhone was stolen in Asia and it's now in Germany. How do I get it back? All I have left is a serial number, apple ID and password, plus a police report. What do I do now? I really want my phone back. Can someone help me? Thank you, Bobi

    No one here can help you, nor can Apple or any carrier. If you know the location, contact the local police where it is located.

  • How to avoid the message "Do you want to save the changes you have made?"

    i have 3 forms
    master block
    detail1 block of master
    detail2 block of detail1
    when i go out of detail1 and detail2 blocks after doing some modifications it asks me "Do you want to save the changes you have made"?
    i want to avoid this message as well as my changes should be posted in the database. what is the solution for this big pblm?

    hi
    may be you are trying to modify the database item or reassigning the database item value which is not actually needed.
    try to comment the reassigning database values
    and give clear_form(do_commit);
    most probably u will not get the message again
    Regards
    Rajdeep .A

  • My time machine does not want to save any more the data from my powerbook 13" Snow Leopard; i get the message "Time Machine could not suppress the disk image of saving "Volumes/Time Capsule Disk/PowerBook _2011_03_21_123627 sparsebundle" What should I do?

    My time machine does not want to save any more the data from my powerbook 13" Snow Leopard; i get the message "Time Machine could not suppress the disk image of saving "Volumes/Time Capsule Disk/PowerBook _2011_03_21_123627 sparsebundle" What is the problem? What should I do?
    Thanks !!
    Alain

    Could that read " . . . could not access . . ."?  If so, try repairing your backups, per #A5 in Time Machine - Troubleshooting.
    If not, or if that doesn't help, see #A1 there. Use the TM Buddy widget it details to copy and post the messages here.

  • Error in sql server with a trigger (I want to display a customize message, when the user left a blank field or null) How can I do?

    How I display a customize message(with a trigger)when a user left a blank field? I want to the stop the insert statament if the user left  the status field in blank. I create a trigger but now I can't enter a row, i used an instead trigger
    too but doesn't work. I want to display a customize message when the user left the
    status field in blank or null. 
     I have the following code:
    CREATE TRIGGER [dbo].[BLANKFIELD] 
    ON [dbo].[Status] 
    FOR INSERT 
    AS 
    BEGIN 
    IF (SELECT COUNT(*) FROM inserted WHERE Status IS NULL) =1
     PRINT 'Please Fill the Status  field is required'
    Rollback;
    END 

    I agree with other comments that you should do this with specifying that the column is NOT NULL to prevent it from being NULL and a constraint if you don't want it to be blank (spaces or the empty string - note that the empty string is not the same thing
    as NULL).
    But for completeness, the reason your trigger does not ever allow you to enter a row is the code
    IF (SELECT COUNT(*) FROM inserted WHERE Status IS NULL) =1
    PRINT 'Please Fill the Status field is required'
    Rollback;
    Since you don't have a begin/end block after IF, the only conditionally executed statement is the one immediately following the IF (that is the PRINT).  So the Rollback is always executed whether or not the IF is true and so all updates are rejected.
    So if you were to do this in a trigger you could do something like the following
    CREATE TRIGGER [dbo].[BLANKFIELD]
    ON [dbo].[Status]
    FOR INSERT
    AS
    BEGIN
    IF EXISTS(SELECT * FROM inserted WHERE Status IS NULL)
    BEGIN
    PRINT 'Please Fill the Status field is required';
    Rollback;
    END
    END
    (As José noted, there can be more than one row in the inserted pseudo table, so you don't want to test whether the COUNT = 1, instead just whether one or more rows exist where the Status  is null.  If you want to prevent Status is NULL, or all
    spaces, or the empty string, then your IF statement would be
    IF EXISTS(SELECT * FROM inserted WHERE ISNULL(Status, '') = '')
    Tom

  • Query on Custom schema table getting 'Do You want to save changes' message

    Hi all,
    I am getting the error message whenever I query from the custom table. Here is the description of the issue.
    1. I have a button on the first block. When the user clicks on this button , execute_query is called on another block. Then the user getting the message "do you want to save the changes" . Although there are no changes made on the form.
    2. The second block is based on a custom table defined on the custom schema.
    3. Created public synonym for this table and also gave the all the grants to apps schema on this table.
    4. This error was not coming before when the second block is based on Apps schema table.
    Any idea on how to fix this.
    Thanks

    I doubt the problem is related to a schema or public synonym. The message is appearing because the value for an item is being changed after your query executes.
    First check to make sure that the blocks that are not based on a table are set to No. See the Database Data Block Property.
    If that doesn't solve the problem, then run the debugger and watch to see what item is changing. You may be doing something in a trigger.

Maybe you are looking for