War Deployment and JNDI troubles - Possibly more than one problem

So this all started with the deployment of a *.WAR file that uses a Spring injected JNDI connection. The JNDI connection is set up in Weblogic 10.3 which is what I'm using for an App server. Problem I am seeing right now is nearly identical to the issue posted in this Struts 2 thread:
http://article.gmane.org/gmane.comp.jakarta.struts.user/165150
In a nutshell, my classes aren't getting loaded properly.
Error looks like: Could not load servers/AdminServer/tmp//appmergegen....
It's a Spring/Struts 2 Project.
Jim C.

you may want to post it in this forum for Web Logic.
WebLogic Server - Upgrade / Install / Environment / Migration
regards,
AMN

Similar Messages

How do i sign up for a new e-mail address @icloud or @me; and can I have more than one e-mail address?

how do i sign up for a new e-mail address @icloud or @me; and can I have more than one e-mail address?

Cessna007 wrote:
how do i sign up for a new e-mail address @icloud or @me; and can I have more than one e-mail address?
You create an @icloud.com address in the first place by signing into Settings>iCloud with your Apple ID and choosing an addres - you can only create an @icloud.com address, not @me.com.
Then if you want further addresses on the same account you can add up to three 'email aliases' - these are additional addresses (not accounts) which deliver into the same inbox as the main account. (In fact it's a good idea to give out alias addresses, rather than the main address, because if they attract spam you can easily change them.) (New aliases can only be @icloud.com ones; @me.com addresses cannot now be created.)
You should be aware before you start that once you've created an alias you cannot turn that address into a full iCloud account or move it to another account.
More information on aliases here: http://help.apple.com/icloud/#mm6b1a490a

How many sign-on's are included when I purchase Photoshop and Illustrator? Can more than one person have access on separate computers?

How many sign-on's are included when I purchase Photoshop and Illustrator? Can more than one person have access on separate computers?

You have 2 activations and the licenses is tied to you personally and you only. You cannot let other people use your software (unless they are family).
Mylenium

My 2009 iMac freezes and won't run more than one application at a time - how can I fix this?

Help! My iMac has been getting worse regarding freezing, especially when trying to open iPhoto. It will load slowly, and then I get the pinwheel of death for ever, until I shutdown and try over again. It usually takes several tries, and usually overnight. How can I resolve this issue?

First, back up all data immediately, as your boot drive might be failing.
Step 1
This diagnostic procedure will query the log for messages that may indicate a system issue. It changes nothing, and therefore will not, in itself, solve your problem.
If you have more than one user account, these instructions must be carried out as an administrator.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|timed? ?o' | tail | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key.
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
Step 2
There are a few other possible causes of generalized slow performance that you can rule out easily.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Reset the System Management Controller.
Run Software Update. If there's a firmware update, install it.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
Step 3
When you notice the problem, launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the View menu or the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for User, System, and Idle at the bottom of the window.
Select the Memory tab. What value is shown in the bottom part of the window for Swap used?
Next, select the Disk tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in andWrites out.)
Step 4
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard by pressing the key combinationcommand-C. Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

How to deploy a Webapplication on WAS more than one times on same server?

Hi all,
I 've a special problem:
In our web-app (some DC's) also stored propertie-Files. Now we would to deploy this application more than one times at same server using different WebContentRoots. (f.e. http://server/app1 and http://server/app2 a.s.o.)
We know, that we must create different EAR-Projects and refer the web-Module and configure the application.
But in the second application there it's recommended to change some properties.
How we can handle this in JDI without copy the web-application?
I hope my question can be understood.
Best Regards
Sven Rickelt
Using Netweaver + WAS 6.40 2004 SP 13

Hi Sven,
as I'm new to NWDI, I cannot give you a 100 percent, field-tested solution. But have you already thought about using the Configuration-Adapter?
If you can change the source of your web-app, you could maintain the data formerly stored in property files using the configuration adapter of visual administrator. The SC <a href="http://help.sap.com/saphelp_nw04/helpdata/en/45/e7e14b517b42788a1c166f9f32455e/content.htm">configuration</a> allows you to access this data.
With this approach you can stick to one web-application and do the configuration work separately for each deployed application.
Best regards,
Frank

K9n2 Diamond having trouble with more than one stick of ram

Hi there. Thanks for reading. My setup is as follows
WIN-500xspx 500W PSU
Geforce 9600 GSO
7750 BE Kuma
XP 64bit
k9n2 diamond w/ BIOS 2.3
2GB Mushkin HP2-6400 (2x1GB)
I just got the board two days ago and got everything set up, but I've been having some trouble with my ram. Whenever I have more than one stick of ram, it fails to post, unless I clear the cmos before I power on. Then, it will give me the option to load the bios or run on default settings. If I run on default, it will boot up fine and work well for about 5 minutes. Then it will shut off and not post until I've cleared the cmos again. So, I figured I had an incompatibility issue with the ram. So I tried another set, the Crucial Ballistix BL1286AA1065.8FEF with the same results. Next I went with the Rendition RM12864AA800 with the same results. I tested each stick individually and they're all good. Each slot works fine as well. I switched the old mobo back and all was well. The only thing left is the PSU but I don't think thats the problem. Any suggestions would be greatly appreciated.

Quote
. If I run on default, it will boot up fine and work well for about 5 minutes. Then it will shut off and not post until I've cleared the cmos again.
Its the PSU, go for better one with strong single rail like Corsair VX,TX Series.

Synching with more than one computer and attempting to delete more than one

Rage is not the word. I have been having the worst time with this thing! UGH! 1st I have more than one computer that has different music on each, but this thing will only sync with 1 and delete anything from another library already added. CRAZY! Second I wanted to rip my cds to my computer without being connected to the internet and itunes won't recong the music added at a later time. I have to be connected to the internet for it to Id the music as I am ripping...CRAZY! Then I was attempting to delete the duplicated music that was not Id and it would only allow me to delete one song at a time...CRAZY! Is there a way to have this thing synch with more than 1 computer? Delete songs in a group and not everything in sight. If so how and if anyone has any remedies for the rest of this craziness I would be most appreciative. I took me forever to even figure how to get to the point to post this. I beginning to feel very sorry I bought this thing. I thought I could rip my cds, and use my work and home computers to synch with it. Please someone tell me I wasn't wrong for making this assumption. Will I be able to sych with other ipods? I bought this thing thinking I could was I wrong. I haven't even attempted that yet. I have an 80 GB ipod

"I have more than one computer that has different music on each, but this thing will only sync with 1 and delete anything from another library already added"
You can't "sync" that is automatically update an iPod from multiple libraries or computers. If you want to connect and use an iPod on more than one computer you need to change the update preference in the iPod Summary tab to "Manually manage music and videos" and click Apply.
Using iPod with Multiple computers
Managing content manually on iPod
"I have to be connected to the internet for it to Id the music as I am ripping"
That's correct, iTunes (and other music programs) downloads the information from an online database that contains the details of many thousands of CDs.
"Delete songs in a group and not everything in sight"
Click on the first track you want to delete in a list, hold down the shift key and click on the last one, this highlights everything in between. Press the delete key
"Will I be able to sych with other ipods?"
What do you want to sync with other iPods, iTunes? You can't sync one iPod with another, you can only update from iTunes. If you are adding a second iPod for your own use, just connect the new iPod to your computer and follow the on screen instructions. It will update from your existing library. Depending on the size of your library and the type of iPod you choose you can have it update all songs and playlists, selected playlists only or you can manage it manually. You can also have a look at this page:How to use multiple iPods with one computer
You might also be interested in this page: iPod Fast Start: The New User's Guide to iPod

Trouble nesting more than one Character Style...

I am trying to create the below heading in CS5 on a Mac:
Lesson 2.1: Who am I?
So I made the Lesson 2.1 a character style called "Lesson #." And then I made Who am I? a paragraph style called "Lesson title" and nested the "Lesson #" though 1 colon. And that worked great. But then I felt like the space between "Lesson #" and "Lesson Title" was too big. (This seems really nit-picky I know but the boxes the lesson titles need to fit in are small and the titles vary in length so I was trying to save all the space I could for the longer titles.)
Lesson 2.1: Who am I?
So I made the space (see the underline above) a character style of it's own that was the same as the "Lesson Title" in all aspects except that it was 11 pt font. I then made this a nested style in the "Lesson Title" that came after "Lesson #" through 1 letter.
But it doesn't seem to be working very well...which made me question if there was something else I needed to do in order to nest more than one character style? Or whether I should be even approaching this issue in this way....
Thank you for any thoughts on this!

YES!!! IT WORKED! I think InDesign and I are now friends. All my styles are working! (knock on wood.)
Weird that the horizontal scaling would work though and not changing the font size? or maybe I jsut don't understand exactly how InDesign thinks yet...

Modbus, having trouble reading more than one register.

I think my issue may be something simple. I am able to read exactly one modbus register correctly. If I try to increase the registers to any more than one I get a timeout 6101 error at the Modbus read module. So far I've tried a number of different layouts, and even two different Modbus slaves from different vendors with the same results. I'm using a USB-RS485 converter with the FTDI232 chip. Again, a single register read always returns the correct data - so I'm almost there. The register divide routine on the right had side is rudimentary for now until I can get data from multiple registers. Any help is appreciated.
Attachments:
Modbus test.vi ‏37 KB

I have solved the issue. On my RS485 converter (I'm using one from bb-electronics), I had "Echo on" enabled. This caused the written command to re-appear on the read buffer. The modbus read function will accept this configuration - but only when reading one register! So, for anyone with this issue in the future - check your echo setting.
Someone more familiar with the modbus protocol's working and the internals of the read function could probably explain why this situation would manifest.
I understand the timed loop is bad practice - I should loop while no error, but I was trying to fix my core issue before making any improvements.
Thanks for your help.

Can i sync my iphone and ipod's to more than one computer?

Can i sync my iphone 4 and ipod's (we have #) to more than one compute? so we call all share the music.
Also can you inport music from an ipod to itunes? (music has already been deleted from the library)

Switching the computer will erase your device and replace the content of it with the content of the new iTunes library. But you can share your music by using Home Sharing. iTunes: Understanding Home Sharing
Purchased music can be copied back by using "transfer purchases" from the iTunes menu or, if not purchased from iTunes, by using 3rd party software http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0

Manage music and videos manually from more than one computer

Hello,
I'm triying to transfer music from two computers (work computer and home computer) to my iPhone. The problem is that when I select the Manage music and videos manually on my iTunes and then apply it keep saying that the iPhone is already synchronized with another computer and if I accept I lose all the media (video and music) on my iPhone. I just want to add new videos and new music manually without losing the existing ones, is it possible?.
I'm using the iPhone 3G with iTunes 7.7 (last version) and Windows Vista.
Thank you

Then it is not possible to add new music files or video files to my iPhone from more that one computer without losing the ones I already transfered from another computer. This is a pitty
Thank you very much

When and if to have more than one application tag

When is it appropriate to add an application tag to faces-config?
I have a faces-config file with an <application tag and a view-handler defined within it, along with a message-bundle.
<application>
<view-handler . . .
<message-bundle . . .
</application
Another <application tag was added to add a <resource-bundle . . . is this necessary?
So now we have the above <application ... chunk, plus another <application . . . chunk ...
<application>
<resource-bundle . . .
</application>
How should this decision be made and/or what is the rule?
Thanks,
W

Yes, it appears that the faces-config DTD file permits multiple application tags (at first, I thought it didn't, then checked into it more).
To me, it doesn't make sense to ever need multiple application tags. Since all the tags within the application tag can appear multiple times as well. Therefore, one in every faces-config.xml file should suffice. Personally I don't think the other developer followed best practices, but technically he did nothing wrong.
I think in this situation, there isn't necessarily a right or wrong way to do it. Let alone a right or wrong time to have multiple application tags. Unless of course having multiple application tags, or not, breaks the program. I've never tried multiple application tags myself.
CowKing

Editing and syncing contacts on more than one iPhone and iPad

I have an iPad 2, and iPhone 3, and iPhone 4 and an iPhone 4S. I would like to edit my contacts and sync them so that the iPad and the iPhones all have the same contacts on them. How do I go about this?

use iCloud

Instagram on Apple store will not download on to my iphone and I have tryed more than one iphone and it doesn't work...

Now my Instagram is not work. It said to update it so I did then it said it was downloaded but it's not on my homescreen and it will not let me open it off of App Store.

restart
http://support.apple.com/kb/ht1430
first step of troubleshooting is always restart

How can I make my Outlook sync with ical and address book on more than one mac?

It currently syncs with my iMac through 'this computer' folder, but i dont have outlook on my macbook, so basically... how can i make my outlook automatically convert/sync to icloud enabled folders?
Not too confusing i hope.

Outlook won't work with iCloud. On your Mac.

War Deployment and JNDI troubles - Possibly more than one problem

Similar Messages

Maybe you are looking for