Warhouse and quality management issue

hi
here one issue is with one purchase order we are doing two GRs after completing the wm-qm process the material is stored in the bin the quant is generated .after doing another GR the material is merged with the previous material and the same quant is generated.
the user wants to be same bin with different quant .can anybody share their experience with this issue.
thnks inadvance.

hi
actuvally in mm02 we are not maintaning the max min quantity in material and i would be appriciated the solution in detail iam littliebit confused
bit clearly it is v high priority issue .
thaks inadvance.

Similar Messages

The Ultimate Guide to Resolving Profile and Device Manager Issues

The following article also applies to issues after re-setting the severs' hostname. It also applies to situations where re-setting the Code Signing Certifictateas described by Apple has not resolved the issue.
Hello,
I have been plagued with Profile Manager and Device Manager issues since day one.
I would like to share my experience and to suggest a way how to resolve issues such as device cannot be enrolled or Code Signing Certificate not accepted.
I shall try to be as brief as possible, just giving an overview of the steps that resolved my issues. The individual steps have been described elsewhere in this forum. For users who have purchased commercial SSL certs the following may not apply.
In my view many of these issues are caused by missing or faulty certificates. So let us first touch on the very complex matter of certificates.
Certificates come in many flavours such as CA (Certificate Authority), Code Signing Certificate, S/MIME and Server Identification.
(Mountain?) Lion Server creates a so-called Intermediate CA certificate (IntermediateCA_hostname_1") and Server Identification Certificate ("hostname") when it installs first. This is critical for the operation of many server functionalities, including Open Direcory. These certs together with the private/public keys can be found in your Keychain. Profile and Device Manager may need a Code Signing Certificate.
The most straightforward way to resolve the Profile Manaher issues is in my view to reset the server created certicates.
The bad news is that this procedure involves quite a few steps and at least 2 hours of your precious time because it means creating a fresh Direcory Master.
I hope that I have not forgotten to mention an important step. Readers' comments and addenda are welcome.
I shall outline a sensible strategy:
1. Clone your dysfunctional server to an external harddrive (SuperDuper does a reliable job)
2. Start the server fom the clone and shut down ALL services.
3. It may be sensible to set up a root user access.
4. Back-up all user data such as addess book, calendar and other data that you *may* need to set up your server.
5. Open Workgroup Manager and export all user and workgroup accounts to the drive that you using to re-build your server (it may cause problems if you back-up to an external drive).
6. Just in case you may also want to back-up the Profile Manager database and erase user profiles:
In Terminal (this applies to Lion Server - paths may be diferent in Mountain Lion !)
Backup: sudo pg_dump -U _postgres -c device_management > $HOME/device_management.sql
Erase database:
sudo /usr/share/devicemgr/backend/wipeDB.sh
7. Note your Directory (diradmin) password for later if you want to re-use it.
8. Open Open Server Admin and demote OD Master to Standalone Directory.
9. In Terminal delete the old Certificate Authority
sudo rm -R /var/root/Library/Application\ Support/Certificate\ Authority/
This step is crucial because else re-building you OD Master will fail.
9. Go back to Server Admin and promote the Standalone Directory to OD Master. You may want to use the same hostname.
10. When the OD Master is ready click on Overview and check that the LDAP and Keberos Realm reflect your server's hostname.
11. Go back to Workgroup Manager and re-import users and groups.
NOTE: passwords are not being exported. I do not know how to salvage user passwords. (Maybe passwords can be recovered by re-mporting an OD archive - comments welcome! ).
12. Go to Server App and reset passwords and (not to forget) user homefolder locations, in particular if you want to login from a network account!
If the home directory has not been defined you cannot login from a network account.
13. You may now want to restore Profile Manager user profiles in Terminal. Issue the following commands:
sudo serveradmin stop devicemgr
sudo serveradmin start postgres
sudo psql -U _postgres -d device_management -f $HOME/device_management.sql
sudo serveradmin start devicemgr
14. You can now switch back on your services, including Profile Manager.
In Profile Manager you may have to configure Device Management. This creates a correct Code Signng Certicate.
15. Check the certificate settings in Server App -> Hadware -> Settings-> SSL Certificates.
16. Check that Apple Push Notifications are set.(you easily check if they are working later)
17. You may want to re-boot OS Server from the clone now.
18. After re-boot open Server App and check that your server is running well.
19. Delete all profiles in System Preferences -> Profiles.
19. Login to Profile Manager. You should have all users and profiles back. In my experience devices have to be re-enrolled before profiles can be pushed and/or devices be enrolled. You may just as well delete the displayed devices now.
20. Grab one of your (portable) Macs that you want to enrol and go to (yourhostname)/mydevices and install the server's trust profile. The profile's name should read "Trust Profile for...) and underneath in green font "Verified".
21. Re-enrol that device. At this stage keep your finger's crossed and take a deep breath.
22. If the device has been successfully enrolled you may at last want to test if pushing profiles really works. Login to Profile Manager as admin, select the newly enrolled device. Check that Automatic Push is enabled (-> Profile -> General). Create a harmless management profile such as defining the dock's position on the target machine. (Do not forget to click SAVE at the end - this is easily missed here). If all is well Profile Manager will display an active task (sending) and the dock's position on the target will have changed in a few seconds if you are on a LAN (Note: If sending seems to take forever: check on the server machine and/or on your router that the proper ports are open and that incoming data is not intercepted by Little Snitch or similar software).
Note: if you intend to enrol an Apple iPhone you may first need to install the proper Apple Configuration software.
Now enjoy Profile and Device Manager !
Regards,
Twistan

HI
1. In Action profiles, logon to system and recheck correcion are available in action definition as well in condition configuration and the schedule condition is also maintained. but the display is not coming(i.e in the worklist this action is not getting displayed).
You can check the schedule condition for the action and match the status values...or try recreating the action with schedule condition again....for customer specific ....copy the standard aciton with ur zname and make a schedule condition and check the same.
2, In suppport team of incident when i give individual processor it throwing a warning that u r not the processor. but when i give org unit it is working perfectly. Could anyone guide on this.
You need to have the empolyee role for BP ..goto BP and got here dropdown for ur bp and choose role Employee and then enter ur userid
also make sure that u have the message processing role
Hope it clarifies ur doubt and resolve ur prob
Regards
Prakhar

SAP TechEd 2011- Data Integration and Quality Managment Sessions

Looking for answers on "Data Integration and Quality Management," check out the related educational sessions at SAP TechEd 2011 ([Las Vegas|http://bit.ly/qE0dZs], [Bangalore|http://bit.ly/oVdGsM], [Madrid|http://bit.ly/rnSNOT]). [Register today|http://www.sdn.sap.com/irj/scn/sapteched]!

Hi,
you must check in sap teched site and register it, the link as below
[SAP Teched Banglore 2011|http://www2.sapevents.com/SAP/TechEd2011Bangalore/index.cfm?fuseaction=agenda.sessionCatalogueHOS&view=overview]
Thanks,
Jansi

Cisco Unified WFO - Call Recording and Quality Management with Extension Mobility agents

Hi All,
We're considering Cisco Unified WFO - Call Recording and Quality Management for a customer running UCCX 8.0, agents on multiple WAN sites, all agents using extension mobility.
The documentation I've been able to find describes three different recording methods:
Using Desktop Recording service (Endpoint) to record from an agent’s desktop.
Server Recording - Uses SPAN (not so good for remote sites)
Network Recording - Uses CUCM recording service / SIP trunk / phone's built in bridge.
Network recording or Desktop recording should be suitable for the customer but it seems that Extension mobility is not supported. Extension Mobility is not mentioned in the 8.5 installation guide, it is mentioned as ‘not supported’ in the 8.0 guide as follows:
'Server Recording and Network Recording have the following limitations:
• Extension mobility is not supported.'
Neither version's documentation specifically mention extension mobility in relation to the desktop recording method, though I realise this is a similar approach to the 'server recording' method.
So the question I have is: Is extension mobility supported in any way on version 8.0, or version 8.5 for recording? And if so which recording method(s) are supported?
Thanks,
Jonathan

Hi,
I had more luck asking questions over at the Calabrio forum - they make the software and Cisco re-brand a version of it - there is some good info on their portal (http://portal.calabrio.com), you have to register but it's fairly painless. The answer I got was:
"QM Desktop recording has always supported extention mobility as it determines the recorded user by the desktop user's login. Extention mobility was not supported for Server and Network recording until the Calabrio QM 8.6.2 release in April 2011 and will be added to Cisco QM starting with QM 8.5.2 in June 2011"
Regards,
Jonathan

Cisco Unified WFO - Call Recording and Quality Management stops recording with conferenced translator

I'm having an issue whenever one of our employee's conferences in an external translator, as soon as they bridge the customer into the call with the translator QM stops recording. I can hear the intial conversation with the customer, and then the employee put the customer on hold and call the translator service. Only when the two are bridged together the call always stops recording.
We are performing all recording on the server side, and are not using Quality Manager Desktop agents.
Any help would be much appreciated. Thanks!
-Chris

So I found the following information listed below. I don't manage the Cisco Unified CM portion of our telco system. Can we limited the ourselves to a single Codec, and would this even resolve the issue. Does this cause other issues if we didn't limit the devices that are recording to a single codec?
Recording IssuesThis topic explains how to diagnose and resolve problems that occur with contact
recordings.
Calls for devices configured for Network Recording drop when you try to conference
or transfer a call.
Symptom. When you try to transfer or conference a call and one or more devices on
the call configured for network recording, the transfer or conference fails and
parties drop off of the call.
Cause. Cisco Unified CM does not support codec changes for devices that are
configured for call recording. The codec must remain the same throughout the life
of the call. For conference calls, the conference bridge must support the codec
used before the conference completes.
Solution. Update the Cisco Unified CM configuration to ensure that no codec
changes occur for network recorded devices.

Training and event management issues

Hi guys,
i am stucked with some of issue in training and event management...
1. Altough client is using TEM but for frontend they are using ESS.. Now problem is search functionality is not working in system. I am getting 0 result.
2. I can see the catalog properly but when i do the booking for the future course then system shows course is successfully booked but in Training Activities list that course is not appearing and nothing updated in backend and if i do booking for future course in the backend then after that i can see that course in the frontend also. same is happening for cancellation. other functionality like prebook, qualification working properly in the system
3. Client is using Appraisal functionality. i have configured appraisal in the backend but how we can do for frontend.
kindly help me regarding these issue as early as possiblee....
Thanks and Best Regard
Puneet

Puneet
Can you please check SAP Note No. 1440812, 1439690, 1386556
Notes : 1421707, 1408134 ... if these can help.... Hope it helps...
Regarding training activities :
Can you please check the assignment of PERNR with User IT0105...
Also, are you using the customized BSP page ... If yes :
Please create a new BSP page copying from the standard BSP page and then enter the new page in the view LSPAGE_ALIAS_C.
Regarding appraisals in frontend, you will see a link of "perform course appraisal" under completed courses if you have configured this in a correct way.
Best Regards
Chetan

Training and event management issue

Hi,
I have issue in Training and event management. Can employee attend two programs in same day in different location?please let me What is standard process
Regards,
Prasath

Is your question related to allowing the registration for two programs on the same day at different locations? If yes, it will be giving a warning message that your training registration is overlapping with already regestered program. That to only when the time of the programs is same. You need to implement custom checks if you would like to resist from registring for such programs.
Conceptually, it is always possible for a person to attend two programs in the same day at two locations (here location definition is company dependent and how do you define different locations of your company). So it wont resist from registring or infact if possible from participating as long as the schedule is not collaiding...

Logistics Invoice verification and Quality Management

Hi,
We have good receipts in purchases orders, with materials that must pass quality inspection (with SAP QM quality management)
I need to know if there is any u201Cstandardu201D way to connect quality management with logistics invoice verification; the requirement is that the invoice cannot be released to payment (unblocked) until the materials of the goods receipt have passed the quality inspection.
Thank you very much for your help!!
Manuel

Dear ,
Here is the path
IMG>> Quality Management -->QM in Logistic --> QM in Procurement -->Define Control Keys
now here After Defining the Control Key, Go to QM in Procurement Tab
and Check the Block Invoice Checkbox
This may help u
REgards,
Pardeep Malik

Front end and conc manager issue post db upgrade

Hi,
We have upgraded our database from 10.2.0.4 to 11.2.0.1. Our ebs application is on 12.0.6.
Also the architechture is : DB+Conc on one node and Web+Forms on the other.
We are not able to get the front end.Also concurrent managers arent cmg up ( When checkd using '../forms/frmservlet').
Below is the snippet of the error thrown :
Oracle error -20001: ORA-20001: Oracle error -12705: ORA-12705: Cannot access NLS data files or invalid environment specified
has been detected in fnd_global.set_nls.set_parameter('NLS_TERRITORY','INDIA').
has been detected in fnd_global.set_nls.
Shutting down Concurrent Manager : 21-DEC-2011 14:53:49
List of errors encountered:
_ 1 _
Concurrent Manager cannot find error description for SYSTEM-Unable to
set territory
Contact your support representative.
Please advice what could be the possible issue.
Thanks in advance,
Rdxdba

Hi,
Make sure that, while upgrading the database you have successfully ran the cr9idiata.pl. And also ORA_NLS10 is pointing to the correct locatation, and that it has read and write permissions.
This variable (ORA_NLS10) must be exported before starting the database.
Thanks

PIR's and batch management issue, can this be solved in APO ?

Hi All,
I've an issue. I honestly dont know where I can get a solution for that and thats why i will post it in mm and also pp forum.
Here is my issue.
All materials are batch managed. Each and every customer can get only certain batches and not all batches meet the requirement of a customer. Lets say I have 3 plants (plant 1, plant 2 and plant 3) and I have 3 customers ( cust1, cust2 and cust3). Lets say I get a demand for material and I create PIR's in plant 1. when I run MRP, it will generate planned orders. I convert that into purchase req and then into STO for plant 2. when plant 2 doesn't have the raw material to process into semi finished, I will create and sto from plant 2 to plant 3 to get the raw material. The reason we create sto to plant 2 initially is because it has to process something before it sends it to plant 1. so the link is from customer 1 --> plant 1 (finished goods) -- > plant 2 (semi finished) --> plant 3 (raw material).
Right from raw material it is specific to a customer. i.e. not all raw material batches from plant 3 will be accepted by customer 1.
so when the demand flows from customer 1 to plant 2, is there anywhere that I can keep track of for which customer that order is going and select raw materials based on the end customer ?
Can this be solved in APO ?

Hi sapcrs,
Your requirement is meet the solution of configuration of the following scenario.
customer 1 --> plant 1 (finished goods) -- > plant 2 (semi finished) --> plant 3 (raw material).
The conditions are
a) Raw material is batch managed
b) Keep track of order flow
Solution:-
1) Maintain raw material as batch managed in R/3. Suitably class and characterisitics to be developed to send the information to APO as that the RM is batch managed.
2) The Bom of semi-fnished item at plant-2 to be maintained with raw material. The source of supply has to be linked with plant-3. The RM will be externally procured from plant-3 for plant-2 which is batch specific. The Bom item will be send to APO as PPM which contain all bom and routing details.
3) Now once RM is ready at Plant-3, it will be sourced to plant-2 and at plant-2, semi-fnished item will be made with the production orders triggered from bom & routing data at plant-2
4) Now semi-finished item is ready at plant-2. Once it is ready, it has to be sent to plant-1 for mfg FG. This can be achieved by creating lane between plant-1 and plant-2.
5) Through lane, semifinished item reaches plant-1 which is made at plant-2 which contains RM made at plant-3 which is batch specific.
6) Using semifinished item, Finished product can be made at plant-1
7) Now your final requirement is to track all order flow changes. This can be achieved by mechanism in APO called pegging. Using pegging, the order flow can be tracked right from FG to RM.
Regards
R. Senthil Mareeswaran.

IPad and Media Manager Issues

I just installed the Verizon Media Manager App on my iPad and it will not pull anything from my pc. It keeps telling me to register. It lets me sign in with my id, lets me bookmark things, but I cannot pull media from my PC. It is very frustrating. Want to be able to view flex view stuff for the kids while on the road and cannot. Also cannot find the fios on demand app in the App store. Please help. The other app that is not working at all is the MY VZ account app. I cannot check bills, pay bills, check email or anything you should be able to do with it. If the app's are buggy, pull them. Please advise with any solutions.

Here's the master page for all of Verizon's apps. Right now only the Media Manager app is available for iPad.
In order to view your personal media, it must first be uploaded to your FlexView Library. This can be done using the Media Manager application on your PC or Mac.
The Media Manager iPad app also allows you to stream Flex View movies and TV shows you have purchased from Verizon, whether you bought it on your set-top-box, PC or phone. In other words, it also serves as the FiOS On Demand app.

Unable to install Adobe Flash Player and Download Manager issue

Dear all,
1. I tried to install adobe flash player and have enabled
'download unsigned ativex control' and "run activex control and
plugins", but never succeeded.
2. I am unable to locate the "download manager" sources.
Please help.
Regards,
Harsen

As a note, running with no anti-virus software is a very bad choice. I would try installing Microsoft security Essentials, [http://microsoft.com/security_essentials http://microsoft.com/security_essentials] to stay safe with a free but light weight anti-virus.
If you want to install a new version of Flash, try installing [http://fpdownload.macromedia.com/pub/flashplayer/current/licensing/win/install_flash_player_11_plugin_32bit.exe http://fpdownload.macromedia.com/pub/flashplayer/current/licensing/win/install_flash_player_11_plugin_32bit.exe].
However, the sites might

Configuration steps for Quality and Batch Management.

Hi Friends,
We are implementing QM along with Batch Management for testing the material like purity,pathology tests.
I am new to Quality and Batch Management.
Could any one guide me, how to configure material master for QM and Batch to test the material?.
Thanks

1) Maintain Material with Classification and Quality Management view
2) Tick the Check box Quality key Active in QM View->QM view->Inspection Set up and activate the inspection type for which the inspection lot.(e.g insp. type 01 - GR against PO)
3) Create Quality Info Record(QI01)
4) In PO the stock automatically goes to Quality stock.
5) Check MMBE stock
6) Do Result Recording and Usage Decision(QA32)
7) Check stock (MMBE).
There are few steps where the PP/QM Consultant need to help you in QI01,QA32 and in Creating characteristics and class according to Requirement(purity...etc).
Regards,
eswarmanu...
Edited by: eswarmanu on Oct 21, 2008 7:09 PM

Regarding quality management

anybody knows what are the t codes ad other businees process whiledealing with Quality Management in case on integration with Material Management

hi,
1) Maintain Material with Classification and Quality Management view
2) Tick the Check box Quality key Active in QM View->QM view->Inspection Set up and activate the inspection type for which the inspection lot.(e.g insp. type 01 - GR against PO)
3) Create Quality Info Record(QI01)
4) In PO the stock automatically goes to Quality stock.
5) Check MMBE stock
6) Do Result Recording and Usage Decision(QA32)
7) Check stock (MMBE).
There are few steps where the PP/QM Consultant need to help you in QI01,QA32 and in Creating characteristics and class according to Requirement(purity...etc).
Regards
Priyanka.P

Quality manager Requirements

One of our Customer is having Contact Center Express 10.x with HA. Number of Agents : 40 , Number of Supervisors : 20. They have 60 CCX Premium License. Now they need to have Voice Recording Solution for All Agents.Need Help regarding this.
1. What is difference between Call Recording and Quality Manager ?
2. What is the Difference Between Quality Manager Base Server and Quality Manager Recording Server ?
3. Both Quality Manager Base Server and Recording Server is mandatory ? OR Either of the one is only required and not both at the same time ?
4. Can i Install Both QM Base Server and QM Recording Server inside one Single Windows server OS ?
5. Can i install CCX Virtual Machine + QM Base Server ( Windows OS) Virtual Machine + QM Rec. Server ( Windows OS ) Virtual Machine in one single UCS Physical Server ?

You buy QM Enterprise direct from Calabrio, and QM Express from Cisco.

Warhouse and quality management issue

Similar Messages

Maybe you are looking for