Warning in oracle 10g installation
During i'm installing oracle 10g 10.2.0.4.0 (downloaded test version) in Microsoft server 2008R2 64 bit version it gives an error ..
ERROR.............
Enterprise manager configuration faild due to the following error-
Error starting database control refer to the file......(log file path) for more details.
You can retry configuring this database with enterprise manager later by manually running file path.....\emca script.
then i try to re config and start the service but nothing happened. Still i cant run the oracle console. i cant start this service. If any one know a proper solution please tell me.
Thank you all...
Edited by: 831585 on Jan 26, 2011 11:27 PM
Yes I tried to run emca but it give an error.
here the log details...
Jan 27, 2011 1:27:16 PM oracle.sysman.emcp.util.DBControlUtil secureDBConsole
INFO: Database Control secured successfully.
Jan 27, 2011 1:27:16 PM oracle.sysman.emcp.EMDBPostConfig performConfiguration
CONFIG: Securing Database Control completed successfully .
Jan 27, 2011 1:27:16 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jan 27, 2011 1:27:16 PM oracle.sysman.emcp.util.DBControlUtil startOMS
INFO: Starting Database Control (this may take a while) ...
Jan 27, 2011 1:27:16 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: cmdType: 0
Jan 27, 2011 1:27:16 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Starting Windows service...OracleDBConsoleAXGRP
Jan 27, 2011 1:27:16 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:27:27 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:27:37 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:27:47 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:27:57 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:28:07 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:28:17 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:28:27 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:28:37 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:28:47 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:28:57 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:29:07 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:29:17 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:29:27 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:29:37 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:29:47 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:29:57 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:30:07 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:30:17 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:30:27 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:30:37 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:30:47 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:30:57 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:31:07 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:31:17 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:31:27 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:31:37 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:31:47 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:31:57 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:32:07 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:32:17 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:32:27 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:32:37 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:32:47 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:32:57 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:33:07 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:33:17 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:33:27 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:33:37 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:33:47 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:33:57 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:34:07 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:34:17 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:34:27 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:34:37 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:34:47 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:34:57 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:35:07 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:35:17 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:35:27 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:35:37 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:35:47 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAXGRP' to fully start
Jan 27, 2011 1:35:47 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Initialization failure for service during start
Jan 27, 2011 1:35:47 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error starting Database Control
Refer to the log file at C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\AXGRP\emca_2011-01-27_01-25-47-PM.log for more details.
Jan 27, 2011 1:35:47 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error starting Database Control
at oracle.sysman.emcp.EMDBPostConfig.performConfiguration(EMDBPostConfig.java:646)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:224)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:193)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:184)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:486)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1142)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:470)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:419)
this error i have encountered. pls if u can give me a solution.
WBR.
Similar Messages
-
Oracle 10g Installation Problem on SUSE Linux 10
Hello Friends,
I want to install SAP Solution Manager 7.0 with Oracle 10g on SUSE Linux 10.0.
But, while starting the Installation i am getting following Errors.
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1,
asianux-2 or SuSE-10
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-04-22_03-59-38PM. Please wait ...
Error in writing to directory /tmp/OraInstall2009-04-22_03-59-38PM. Please ensure that this directory is
writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
I have checked the Permissions and the Size of /tmp Directory, which is as followed:
drwxr-xr-x 11 root root 0 2009-04-22 21:19 sys
drwxrwxrwt 52 root root 1824 2009-04-22 16:00 tmp
drwxr-xr-x 15 root root 408 2009-04-19 14:43 usr
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda10 2104376 73112 2031264 4% /tmp
I am starting the Oracle 10g Installation within orasm7 User which is a member of dba, users, disk groups.
The directories which are created upon starting the Oracle Installation in /tmp directory are having the situations as followed:
drwxr-xr-x 3 orasm7 dba 128 2009-04-21 18:41 OraInstall2009-04-21_06-41-14PM
drwxr-xr-x 3 orasm7 dba 128 2009-04-21 18:41 OraInstall2009-04-21_06-41-25PM
drwxr-xr-x 3 orasm7 dba 128 2009-04-22 15:59 OraInstall2009-04-22_03-59-38PM
The Oracle Installation log is as follwoed:
Using paramFile: /home/MyData/51031676/database/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1, asianux-2 or SuSE-10
Passed
All installer requirements met.
The commandline for unzip:
/home/MyData/51031676/database/install/unzip -qqq ../stage/Components/oracle.swd.jre/1.4.2.0.8
/1/DataFiles/\*.jar -d /tmp/OraInstall2009-04-22_03-59-38PM
I have set DISPLAY variable in this way before starting Installation:
DISPLAY=$HOSTNAME:0.0
export DISPLAY
I tried to search the solution over the internet for this kind of problem, but i am not able to find its solution. Even i tried to start the Orale installation using this parameter: ./runInstaller ignoreSysPrereqs, but still it is giving the same unexpected error.
I have a doubt on File/Directory permissions which are created for Installation in /tmp. The umask setiing of the system is 0022.
Please, help me for this issue.
Thanks & Regards,
Bhavik G. ShroffHi Markus,
How are you ?
Thank you very much for your reply.
I was executing wrong runInstaller file. RUNINSTALLER is right file for starting the execution. But still i am facing the same error, which is as followed.
Preparing response files. Please wait:
======================================
Working on /home/MyData/51031676/database/SAP/SVRCUSTOM.RSP
/home/MyData/51031676/database/SAP/SVRCUSTOM.RSP --> /tmp/.orainst_rsp.27450: Done
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1, asianux-2 or SuSE-10
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM. Please wait ...
Error in writing to directory /home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM. Please ensure that
this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
SHROFF:~ # cd /home/orasm7/tmpora/
SHROFF:/home/orasm7/tmpora # ll
total 0
drwxr-xr-x 3 orasm7 dba 128 Apr 22 17:25 OraInstall2009-04-22_05-25-26PM
SHROFF:/home/orasm7/tmpora # cd OraInstall2009-04-22_05-25-26PM/
SHROFF:/home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM # ll
total 4
drwxr-xr-x 2 orasm7 dba 304 Apr 22 17:25 images
-rwxr-xr-x 1 orasm7 dba 504 Apr 22 17:25 installActions2009-04-22_05-25-26PM.log
SHROFF:/home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM #
I have a doubt on tmp_netca_file & tmp_dbca_file variable.
Please give your suggestion for the same.
Regards,
Bhavik G. Shroff
Edited by: Bhavik G. Shroff on Apr 22, 2009 2:10 PM -
Oracle 10g installation on Windows 7
I am currently using Oracle 10g on my laptop running on Windows Vista. Now i am planning to upgrade my OS to Windows 7. My question here, is can I use the same Oracle 10g installable to install in windows 7 also ??
is it possible ??
thanks,
JJPossible yes? Brilliant no!
Windows 7 is totally uncertified and unsupported with all Oracle products and if you have an issue there is essentially no support or patch available.
Personally I think Vista a cruel joke so my recommendation would be to go to XP SP3 which at least has the attribute of stability or move to Linux which is what I did on one of my laptops. -
Oracle 10g installation on aix 52
Oracle 10g installation is failing on a
aix52 64bit machine
After installing the product running
$ORACLE_HOME/root.sh for setup as user root results
in the following errors:
exec(): 0509-036 Cannot load program /dbms/oracle/10g/OraHome/bin/crsctl.bin because of the following errors:
0509-130 Symbol resolution failed for /dbms/oracle/10g/OraHome/lib/libttsh10.a[shr_ttsh10.o] because:
0509-136 Symbol aio_nwait_timeout (number 324) is not exported from
dependent module /unix.
0509-022 Cannot load module /dbms/oracle/10g/OraHome/lib/libhasgen10.a(shr_hasgen10.o).
0509-150 Dependent module libttsh10.a(shr_ttsh10.o) could not be loaded.
0509-026 System error: Cannot run a file that does not have a valid format.
0509-192 Examine .loader section symbols with the
'dump -Tv' command.
exec(): 0509-036 Cannot load program /dbms/oracle/10g/OraHome/bin/clscfg because of the following errors:
0509-130 Symbol resolution failed for /dbms/oracle/10g/OraHome/lib/libttsh10.a[shr_ttsh10.o] because:
0509-136 Symbol aio_nwait_timeout (number 324) is not exported from
dependent module /unix.
0509-022 Cannot load module /dbms/oracle/10g/OraHome/lib/libhasgen10.a(shr_hasgen10.o).
0509-150 Dependent module libttsh10.a(shr_ttsh10.o) could not be loaded.
0509-026 System error: Cannot run a file that does not have a valid format.
0509-192 Examine .loader section symbols with the
'dump -Tv' command.
Failed to initialize Oracle Cluster Registry for cluster
Any suggenstion on this will be appreciated.Would like to see the http://download-west.oracle.com/docs/cd/B19306_01/relnotes.102/b19074/toc.htm#CJAFJGIC or for linux, see http://www.puschitz.com/InstallingOracle10g.shtml.
Its trustworthy sites and my request is to delete all the files and start clean-installation again.
Revert back if any clarifications required.
Regards,
Star Nirav
Oracle 10g installation is failing on a
aix52 64bit machine
After installing the product running
$ORACLE_HOME/root.sh for setup as user root results
in the following errors:
exec(): 0509-036 Cannot load program
/dbms/oracle/10g/OraHome/bin/crsctl.bin because of
the following errors:
0509-130 Symbol resolution failed for
/dbms/oracle/10g/OraHome/lib/libttsh10.a[shr_ttsh10.o
because:
0509-136 Symbol aio_nwait_timeout (number
324) is not exported from
dependent module /unix.
annot load module
/dbms/oracle/10g/OraHome/lib/libhasgen10.a(shr_hasgen1
0.o).
0509-150 Dependent module
libttsh10.a(shr_ttsh10.o) could not be loaded.
0509-026 System error: Cannot run a file that
does not have a valid format.
0509-192 Examine .loader section symbols with
the
'dump -Tv' command.
Cannot load program
/dbms/oracle/10g/OraHome/bin/clscfg because of the
following errors:
0509-130 Symbol resolution failed for
/dbms/oracle/10g/OraHome/lib/libttsh10.a[shr_ttsh10.o
because:
0509-136 Symbol aio_nwait_timeout (number
324) is not exported from
dependent module /unix.
annot load module
/dbms/oracle/10g/OraHome/lib/libhasgen10.a(shr_hasgen1
0.o).
0509-150 Dependent module
libttsh10.a(shr_ttsh10.o) could not be loaded.
0509-026 System error: Cannot run a file that
does not have a valid format.
0509-192 Examine .loader section symbols with
the
'dump -Tv' command.
lize Oracle Cluster Registry for cluster
Any suggenstion on this will be appreciated. -
SUNWsprox package with solaris 10 for Oracle 10g Installation....
Hi
I am in problem with a Solaris 10 package "SUNWsprox - Sun workshop Bundled 64-bit make library" for Oracle 10g Installation. I checked the CDs (In the /.../products) but did't found this packege. Can any one tell me please can I go without this package or where I found this package...Please Its very URGENT for me....
Thanks
Mohammed TanvirHi...
I had the same issue, but found out that the SUNWsprox was replaced by SUNWsprot. The OUI 10.1 Release 2 will 'pass' as the doco in the Oracle quick install guide is wrong (as well as 10g Application Server).
The only way to lay a 10g Release database on Solaris 10 is to lay the software doen only, then cd in the .../bin directory, step your Rdbms ORACLE_HOME, ORACLE_SID, LD_LIBRARY_PATH and of course the DISPLAY (is X-windowing into the server), and run dbca manually. Oracle 10g is a bit buggy.
Roger -
Error encounded during oracle 10g installation on mac os 10x
Hi All,
I am installing oracle 10g on my mac laptop os 10 x, I am getting the below error during execution of dbca script for db creation, I am not able to proceed further, please advice
[Thread-3] [17:11:23:18] [BasicStep.execute:202] Executing Step : CLONE_DB_CREATION_RMAN_RESTORE
[Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01092
[Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01034
[Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-03114
[Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-12560
[Thread-3] [17:11:23:18] [StepErrorHandler.setIgnorableErrors:250] setting Ignorable Error: ORA-01109
[Thread-3] [17:11:23:19] [BasicStep.configureSettings:304] messageHandler being set=null
[Thread-3] [17:11:23:20] [BasicStep.execute:202] Executing Step : INSTANCE_CREATION
[Thread-3] [17:11:23:20] [BasicStep.configureSettings:304] messageHandler being set=null
[Thread-3] [17:11:23:25] [InitParamAttributes.sortParams:3532] m_sortOn:-1 sortOn:4
[Thread-3] [17:11:23:53] [Host.noEntryinOratab:5115] Check made for oratab arg passed............
[Thread-3] [17:11:23:53] [Oratab.getTempFile:710] Temp oratab: /tmp/oratab
[Thread-3] [17:11:23:94] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@29da77
[Thread-3] [17:11:23:95] [CloneRmanRestoreStep.executeImpl:217] Instance Creation went fine..........
[Thread-3] [17:11:23:96] [CloneRmanRestoreStep.executeImpl:224] db_recovery_file_dest=/app/oracle/flash_recovery_area
[Thread-3] [17:11:23:96] [CloneRmanRestoreStep.executeImpl:227] db_recovery_file_dest_size=2147483648
[Thread-1] [17:11:24:476] [BasicStep.handleNonIgnorableError:430] oracle.sysman.assistants.util.UIMessageHandler@29da77:messageHandler
[Thread-1] [17:11:24:476] [BasicStep.handleNonIgnorableError:431] ORA-12547: TNS:lost contact
:msg
[Thread-3] [17:11:27:466] [SQLEngine.done:1966] Done called
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12547: TNS:lost contact
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1482)
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.connect(SQLEngine.java:829)
at oracle.sysman.assistants.dbca.backend.CloneRmanRestoreStep.executeImpl(CloneRmanRestoreStep.java:244)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2488)
at java.lang.Thread.run(Thread.java:552)
[Thread-3] [17:11:27:470] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@29da77
[Thread-3] [17:11:27:470] [StepContext$ModeRunner.run:2504] oracle.sysman.assistants.dbca.backend.CloneRmanRestoreStep.executeImpl(CloneRmanRestoreStep.java:435)
oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2488)
java.lang.Thread.run(Thread.java:552)
Thanks
VijayaprakashDuplicate post - Error encounded during oracle 10g installation on mac os 10x
Srini -
OracleAS 10g installation (please Help)
Hi All
i want a help in[b] OracleAS 10g installation
in the first step in it's installation . must install oracleAS infrastracture . in my way to install it many Errors & messages appears to me
this Errors & messages in 4 pictures to see it .. hope to find a solution for this
th pictures in this links
1- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5413
2- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5414
3- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5415
4- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5416
after pressing ignor in the forth screen many errors & messages appears to meOracle AS10g = 10.1.2.0.2 I presume...
However, my first questions is still valid "The questions is if you followed EVERY step outlined in the Application Server Installation Guide? If you did, then there should be no errors."
I have had similar issues when environment variables was still set during installations, ORACLE_HOME etc. You must unset those, as described in the Installation Guide, before starting an installations.
Please check these two Metalink Notes:
295446.1 "OracleCSService service may fail to start during the install of IAS 10.1.2 on Windows"
365046.1 "The Infrastructure DBCA Stops with Error "Failed to initialize OCR"
Regards,
Martin -
Is Oracle AS part of Oracle 10g installation?
I had a query that is Oracle application server a part of Oracle 10g installation? I get this doubt because isqlplus which runs on port 5560 by default has a web interface.
I hope, my question is clear.
Please revert with the reply to my query.
Regards972145 wrote:
I had a query that is Oracle application server a part of Oracle 10g installation? I get this doubt because isqlplus which runs on port 5560 by default has a web interface.
I hope, my question is clear.
Please revert with the reply to my query.
Regardsno Oracle Application Server is NOT included with DB installation -
Oracle 10g installation is hanging in RAC setup..
Hi,
I installed 10 clusterware succesfully(10.2.0.1) in linux 4AS. CRS is running successfully in two nodes. i set kernel parmeters and installed require package also.When i am try to install oracle 10g database software(10.2.0.1), it is going fine 24% after that it is hanging.installation progress bar is showing 24%
Thanks,Hi,
Please find the installAction log file and installAction Error file,
installActions2009-03-15_08-30-35PM.log
SSL Required Support Files for InstantClient 10.2.0.1.0
regexp 2.1.9.0.0
Bali Share 1.1.18.0.0
Oracle Universal Installer 10.2.0.1.0
Oracle One-Off Patch Installer 10.2.0.1.0
Installer SDK Component 10.2.0.1.0
Java Runtime Environment 1.4.2.8.0
Sun JDK 1.4.2.0.8
Sun JDK extensions 10.1.2.0.0
INFO: Method 'dispose()' Not implemented in class 'oracle.sysman.oii.oiif.oiifp.OiifpWizIntroPanel'
INFO: Method 'dispose()' Not implemented in class 'OiSuperAdminPasswd'
INFO: config-context initialized
INFO: *** Install Page***
INFO: FastCopy : File Version is Compatible
INFO: Install mode is fastcopy mode for component 'oracle.server' with Install type 'EE'.
INFO: FASTCOPYRAC : Oracle Home < /u01/app/oracle/product/10.2.0/db_1 >is shared. Instantiating RAC files
INFO: HomeSetup JRE files in Scratch :590
INFO: Setting variable 'ROOTSH_LOCATION' to '/u01/app/oracle/product/10.2.0/db_1/root.sh'. Received the value from a code block.
INFO: Setting variable 'ROOTSH_LOCATION' to '/u01/app/oracle/product/10.2.0/db_1/root.sh'. Received the value from a code block.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_EE_exp_1.xml'.
INFO: Performing fastcopy operations based on the information in the file 'racfiles.jar'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_EE_dirs.lst'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_EE_filemap.jar'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_EE_1.xml'.
INFO: Performing fastcopy operations based on the information in the file 'setperms1.sh'.
INFO: Number of threads for fast copy :1
WARNING: This will stop installation of all products and exit the Installer. Are you sure that you want to stop the installation and exit?
INFO: User Selected: Yes/OK
oraInstall2009-03-15_08-30-35PM.err
java.util.zip.ZipException: too many length or distance symbols
at java.util.zip.InflaterInputStream.read(Unknown Source)
at java.util.zip.ZipInputStream.read(Unknown Source)
at java.io.FilterInputStream.read(Unknown Source)
at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1420)
at oracle.sysman.oii.oiij.OiijFastJarExtracter.copyFileFromJar(OiijFastJarExtracter.java:258)
at oracle.sysman.oii.oiij.OiijFastJarExtracter.copyJarContents(OiijFastJarExtracter.java:194)
at oracle.sysman.oii.oiij.OiijFastJarExtracter.extract(OiijFastJarExtracter.java:143)
at oracle.sysman.oii.oiij.OiijJarExtractQueue$OiijJarExtractWorker.run(OiijJarExtractQueue.java:341)
Thanks, -
Oracle 10g installation on xp sp2....plzzzzzzzzzzzz anyone help me
hi ....
im trying to install oracle 10g on my system(hp dv6231 eu, 1.56ghz,980mb ram 80gb hard disk) i installed xp came with vista.
when i try to install oracle , after clicking run exe....first page displays in that the option is disabled(basic installation or advanced installation). after giving password wn i click next ....thats it screen disappeared.
so i booted in safe mode with networking...... in this case different.. in first page the basic and advanced installation is enabled. so i selected basic installation and filled password.
installation started , gave me one warning abt networking parameters. i skiped that one . it went to smooth untill database creation.
in that im getting error...ORA-12560.--TNS PROTOCAL ERROR.
thats it my oracle installation over.. i been trying for last one week. i cant able to suceed . i formated my system 3 times. even i tryed with loop back adapter .
could any help me onthis plzzzzzzzzzzzzzzzzzzzz
thanking youIf you install this locally in your machine, you can try to delete the file with hosts name to resolve the error ORA-12560.
This file is located in C:\Windows\System32\Drivers.
Best Regards
Douglas Paiva -
Oracle 10g installation guidance
hi every body
i am a newbie and a student.
i have EBS 12R installed over my laptop - win Xp platform.
now i want to install oracle 10 over linux platform ...
for that i am going to install "ORACLE ENTERPRISE LINUX" 1st and then oracle 10g over my laptop.
my questions is :
1-should i perform a fresh installation of my OS (XP) ->it should be clear of EBS 12R. and then linux
because i have read that oracle softwares change some registry settings ???
-if i can go ahead than i have to ask one thing more
ill be installing linux in D: drive of my laptop .now during installation there is a warning
->"the partition table over drive sda in unreadable.to create a new partition it must be initialized causing the loss of all data on the drive "
if i go for yes then is it going to delete all previous data over my hard drive ???
if yes can i avoid this situation ??
thnx for any guidance.
REGARDS !hi
i have checked those links and i must say m thankful to you for your guidance :)
being an under grad student its very difficult for me to get some help .. and you guys always help a lot without even considering my level of knowledge .
thnx
REGARDS ! -
Oracle 10g installation error in linux...
Hi,
i am getting following error when installing oracle 10g(10.2.0.1) in RHEL4.i have installed following required packages also.
binutils-2.15.92.0.2-21
compat-db-4.1.25-9
control-center-2.8.0-12.rhel4.5
gcc-3.4.6-3
gcc-c++-3.4.6-3
glibc-2.3.4-2.25
glibc-common-2.3.4-2.25
gnome-libs-1.4.1.2.90-44.1
libstdc++-3.4.6-3
libstdc++-devel-3.4.6-3
make-3.80-6.EL4
pdksh-5.2.14-30.3
sysstat-5.0.5-11.rhel4
xscreensaver-4.18-5.rhel4.11
libaio-0.3.105-2
installActions2009-03-18_09-04-11AM.log
INFO: rm -f nnfgt.*
(if [ "compile" = "compile" ] ; then \
/u01/app/oracle/10.2.0/db_1/bin/gennfgt > nnfgt.c ;\
/usr/bin/gcc -c nnfgt.c ;\
rm -f /u01/app/oracle/10.2.0/db_1/lib/nnfgt.o ;\
mv nnfgt.o /u01/app/oracle/10.2.0/db_1/lib/ ;\
/usr/bin/ar rv /u01/app/oracle/10.2.0/db_1/lib/libn10.a /u01/app/oracle/10.2.0/db_1/lib/nnfgt.o ; fi)
INFO: /bin/sh: /usr/bin/gcc: No such file or directory
INFO: mv:
INFO: cannot stat `nnfgt.o'
INFO: : No such file or directory
INFO:
INFO: /usr/bin/ar: /u01/app/oracle/10.2.0/db_1/lib/nnfgt.o: No such file or directory
INFO: make: *** [nnfgt.o] Error 1
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'nnfgt.o' of makefile '/u01/app/oracle/10.2.0/db_1/network/lib/ins_net_client.mk'. See '/u01/app/oracle/oraInventory/logs/installActions2009-03-18_09-04-11AM.log' for details.
Exception Severity: 1
WARNING: This will stop installation of all products and exit the Installer. Are you sure that you want to stop the installation and exit?
INFO: User Selected: Yes/OK
INFO: Exception handling set to prompt user with options to Retry Ignore
User Choice: User selected to stop installation of all components.
Thanks,what bit oracle software are You trying to install on what bit linux? 32bit for both?
show
uname -a
Required packages are these:
binutils-2.15.92.0.2-18
compat-libstdc++-33.2.3-47.3
elfutils-libelf-0.97-5
elfutils-libelf-devel-0.97-5
gcc-3.4.5-2
gcc-c++-3.4.5-2
glibc-2.3.4-2.19
glibc-common-2.3.4-2.19
glibc-devel-2.3.4-2.19
glibc-headers-2.3.4-2.19
libaio-devel-0.3.105-2
libaio-0.3.105-2
libgcc-3.4.5
libstdc++-3.4.5-2
libstdc++-devel-3.4.5-2
make-3.80-5
sysstat-5.0.5
unixODBC-2.2.11
unixODBC-devel-2.2.11
compat-db-4.1.25-9
compat-libstdc++-296-2.96-132.7.2
control-center-2.8.0-12
gnome-libs-1.4.1.2.90-44.1
pdksh-5.2.14-30
xorg-x11-deprecated-libs-6.8.1-23.EL
openmotif21-2.1.30-11.RHEL4.2 (Required to install Oracle Demos)
do you have them all?
querry with
rpm -aq | grep ....
If You have metalink access then read metalink note 401705.1 -
While Installing Oracle 10g, I get the following warning
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Failed <<<<
Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses; However, before you can do this, you must configure the Microsoft LoopBack Adapter to be the primary network adapter on the system. See the Installation Guide for more details on installing the software on systems configured with DHCP.
========================================================
When I ignored this warning and proceeded with the installation tnsnames.ora was not getting created.
Please help on this.Hi,
You need to configure the Loop Back Adapter on your system, Since ORACLE does not support the dynamic IP Address. Do the Loop Adapater the Problem will be solved.
Refer :-
http://youngcow.net/doc/oracle10g/install.102/b14316/reqs.htm#BABGCEAI
Check for "Installing a Loopback Adapter"
- Pavan Kumar N -
OracleAS 10g Installation Problem on RedHat AS 3.0
Hi
I need to install OracleAS 10g on RedHat AS 3.0 and it seems that I need a patch (Patch 3006854) and the installation is impossible without it.I just started using oracleAS 10g and I dont have any metalink id.
I think something is wrong here.
a free trial version with a commercial patch !!!
can any one please help me out.
regards yashardear fredrik
I tried to install it according to the installation guid on http://www.oracle-base.com/articles/10g/OracleAS10gInstallationOnRedHatAS3.php as you see it asked for installation of a patch.
and yes I tried to install it without installing this patch and I got an error saying that I am missing a file named ld.so in /etc.I thought it might be connected to that patch.
beside when I was looking for the solution to my problem I saw many people having the same problem and asking the exact same question.
please notify about any solution that you think might help me solving this problem. I am in a hurry
regards yashar -
Oracle 10g installation problem on redHat
Dear pals,
Hi, I got an error while installing the 10g into my redhat machine. My redhat should be supported, but not know what is happened...
./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-2.1, UnitedLinux-1.0 or redhat-3
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at /ora/oraInventory/logs/installActions2004-03-31_11-39-25AM.log
The error log show the same thing thus nothing can help.
My Redhat version is:
Linux version 2.4.20-8 ([email protected]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003
Is there anyone can help? Thank you very much in advance.
Regards,
EddieWerner Puschitz has a good home page (sorry, I forgot the link) on that:
su - root
cp /etc/redhat-release /etc/redhat-release.backup
cat > /etc/redhat-release << EOF
Red Hat Enterprise Linux AS release 3 (Taroon)
EOF
It works for me on RH9.0. Change redhat-release.backup to
redhat-release after you are done with your installation.
Maybe you are looking for
-
I have created a flash document that has a mask in it, and I am trying to publish it as an animated gif. On my home computer, I go to publish and set all the settings, but when it get's published it doesn't show the mask. At my work computer it doesn
-
HP PSC 2410 - can only print when document contains a color besides B & W..
Sorry, I got only crickets chirping on this over at "Tiger printing". Thought someone here might have insight w/ the user account "smoking gun" element. Background... It has been frustrating since the update 10.4.7 "broke" my printing ease (it did, f
-
How can I save my keepsake photo albums as PDFs in my album folder. Since I changed from Snow Leopard to Lion last year I have't been able to do this.
-
Table headings and search text in OVS
Hi Is there a way by which the column headings in the results table and the text for the search criteria can be changed in the OVS. Regrads Pran
-
Can iPhoto work in tandem with Bridge without making duplicate copies?
I recently purchased an iPad and want to move some photo collections on to it. I currently use Bridge to manage my collection of many thousands of images, but it obviously does not let me easily sync with any kind of i-device. I am hoping that iPhoto