Warning message for material substitution in ERP E-commerce

Hi Gurus,
We are implementing SAP ERP E-commerce with TREX, ECC 6.0 backend.
Automatic material substitution is working in ECC. The material is also dispalying a warining message before substitution.
In B2B shop the substituion works - material X is replaced with matereial y but there is no warning message during substituion.
I believe matereial substituion in E-commerce is standard funtionality and it should work as configured in ECC for VA01.
Any susgestion why there is no dispaly of any message during matereial sub in E-commerce.
Thank you

Hi Ram,
What type of messags can be displayed on ECO ERP can be configured via XCM "UI" component. By default only error messages are displayed, You can create a customer component with message severity set to 'Warning" / "info" as required. After this all the messages raised by the Standard BAPIs are displayed on the basket.
However you need to be careful what severity level you want to use as apart from the message that you require, lot of other messages might also be displayed on the basket.
Regards
Roopali

Similar Messages

How to prevent error message for material description in MDG material detail screen, when user click on check action

Dear Experts,
I have a requirement for making material description as non mandetory in change request view of mdg material screen.
I have done that using field usage in get data method of feeder classes, but still message is displaying.
This message 'Material description is mandatory is displaying with check action only, but not with save or submit after i anhance field property as not mandetory.
How to prevent error message for material description in MDG material detail screen, when user click on check action.
Thanks
Sukumar

Hello Sukumar
In IMG activity "Configure Properties of Change Request Step", you can completely deactivate the reuse area checks (but will then loose all other checks of the backend business logic as well).
You can also set the error severity of the checks from Error to Warning (per CR type, not per check).
Or you provide a default value for the material description, e.g. by implementing the BAdI USMD_RULE_SERVICE.
Regards, Ingo Bruß

Warning message for ARAP payment difference

Dear all,
Is there any way to display warning message for AR/AP clearing if there is payment difference? spro can set the tolerance level but will not display any message if the difference is within tolerance group.
My qn is how to warn the users before posting such payment difference txn. Thx

Normally if it is within tolerance limit, nothin get populated.
You can see the messages in OBA5.
You can ask your ABAPer to customize a message.
Assign them accordingly in OBA5 to achieve this.
Regards,
Ravi

Warning message for Managed server

Hi,
I am using weblogic 11g and OS is LINUX.
I am getting warning message for my managed server as "ThreadPool has stuck threads".
And values of "Self-Tuning Thread Pool" are
Active Execute Threads : 17
Execute Thread Total Count : 17
Execute Thread Idle Count : 8
Queue Length : 0
Pending User Request Count : 0
Completed Request Count : 18529
Hogging Thread Count: 6
Standby Thread Count: 0
Throughput : 13.486513486513486
and thread dump is
"main" waiting for lock weblogic.t3.srvr.T3Srvr@4c704c70 WAITING native
 java.lang.Object.wait(Native Method)
 java.lang.Object.wait(Object.java:167)
 weblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java:849)
 weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:465)
 weblogic.Server.main(Server.java:67)
"JIT Compilation Thread" RUNNABLE
null
"Signal Dispatcher" RUNNABLE native
 com.ibm.misc.SignalDispatcher.waitForSignal(Native Method)
 com.ibm.misc.SignalDispatcher.run(SignalDispatcher.java:54)
"Gc Slave Thread" RUNNABLE
null
"Gc Slave Thread" RUNNABLE
null
"Gc Slave Thread" RUNNABLE
null
"Thread-4" waiting for lock java.util.Timer$TimerImpl@13ee13ee WAITING native
 java.lang.Object.wait(Native Method)
 java.lang.Object.wait(Object.java:167)
 java.util.Timer$TimerImpl.run(Timer.java:210)
"Thread-5" waiting for lock java.util.Timer$TimerImpl@344a344a TIMED_WAITING native
 java.lang.Object.wait(Native Method)
 java.lang.Object.wait(Object.java:196)
 java.util.Timer$TimerImpl.run(Timer.java:230)
"[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'" RUNNABLE native
"[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'" waiting for lock weblogic.work.ExecuteThread@4a2f4a2f WAITING native
"[STUCK] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'" RUNNABLE native
"[STUCK] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'" RUNNABLE native
"[STUCK] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'" RUNNABLE native
"[STUCK] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'" waiting for lock [email protected]238d2 TIMED_WAITING native
"[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'" waiting for lock weblogic.work.ExecuteThread@63776377 WAITING native
"[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'" RUNNABLE native
"[ACTIVE] ExecuteThread: '8' for queue: 'weblogic.kernel.Default (self-tuning)'" waiting for lock weblogic.work.ExecuteThread@b230b23 WAITING native
"[ACTIVE] ExecuteThread: '9' for queue: 'weblogic.kernel.Default (self-tuning)'" waiting for lock weblogic.work.ExecuteThread@6d096d09 WAITING native
"[ACTIVE] ExecuteThread: '10' for queue: 'weblogic.kernel.Default (self-tuning)'" RUNNABLE native
"[ACTIVE] ExecuteThread: '11' for queue: 'weblogic.kernel.Default (self-tuning)'" waiting for lock weblogic.work.ExecuteThread@8ee08ee WAITING native
"[ACTIVE] ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)'" waiting for lock weblogic.work.ExecuteThread@64426442 WAITING native
"[ACTIVE] ExecuteThread: '13' for queue: 'weblogic.kernel.Default (self-tuning)'" RUNNABLE native
"[ACTIVE] ExecuteThread: '14' for queue: 'weblogic.kernel.Default (self-tuning)'" waiting for lock weblogic.work.ExecuteThread@7a087a08 WAITING native
"[ACTIVE] ExecuteThread: '15' for queue: 'weblogic.kernel.Default (self-tuning)'" waiting for lock weblogic.work.ExecuteThread@35d035d WAITING native
"[ACTIVE] ExecuteThread: '16' for queue: 'weblogic.kernel.Default (self-tuning)'" waiting for lock weblogic.work.ExecuteThread@6300630 WAITING native
Please suggest me how to resolve this issue.

Hi,
The problem is that the directory /appl/webbus/bea/user_projects/domains/ITIC-DEVEL-WLI/ does not exist at the node, because we have move it to /appl/webdbus/ instead of /appl/webbus/. The question is why applications need to create adminServerDevel/upload directory and how can override it.
Thanks in advanced

How to remove the 'New Entry' button in the warning message for a dialog bo

Hi Experts,
I am calling a Modal Dialog box screen having a pushbutton.
On the click of the pushbutton, I am performing some checks, and giving a warning message.
The warning message comes as a popup in this case and has three buttons on it.
One of these buttons is titled 'New entry'.
I dont want that button to come on the warning popup.
Please let me know if there is a way out for this.
Thanks in advance.
Useful answers will surely be rewarded.
Regards,
Himanshu

Hi Jyothi,
Thanks a lot for ur prompt reply.
But, in my dialog screen, on click of the button I am simply using the statement :
MESSAGE W000(0K) with 'text'.
The resulting warning message comes as a popup with the 'New Entry' button on it.
From the warning popup, how can I remove the button.
Please let me know.
Thanks.
Regards,
Himanshu

BI Publisher report ends with Warning Message for Pivot type reports..

Hi,
I had used BI reporting(xml publisher) to develop our all reports and registered in R12 and works fine for all the tabular/forms type reports but it fails with the warning message(colored in yellow) for Pivot type reports. The output comes in xml..
When I changed the pivot table type report to tabular it comes with pdf. No issues.I do not know how to solve this issue...
Please help me on this..
Thanks
Imran

Welcome to the forums !
Pl post details of OS, database and EBS versions, along with the complete error message.
HTH
Srini

BADI/user exit for ME21N - Warning message for "our reference" field

Dear all,
I have a problem.
In ME21N, I need to show a warning message (message w... ) when user enter an already-used-before input in "Our reference' field (EKKO-UNSEZ).
I've tried in two methods.
1. Using fm EXIT_SAPMM06E_004. But it can only works for Error message. My warning message never shows up.
2. Tried to implement classic BADI ME_PROCESS_PO_CUST, using the PROCESS_HEADER method. Got the break-point spot on, but still didn't show the warning message.
Why is my warning message always got override?
Please advise.
Thanks in advance
Ahmad

Hi Ahmad,
Check the below links:
Unable to put Warning messages in ME21N and ME22N in Exit / BAdI in ECC 6.0
Warning message in me22n check user-exit can't process?
Custome warning message in T. code me51n me52n & me21n , me22n
Regards,
Nisha Vengal.

Warning messages for purchage order date?

Hi Friends,
I am ABAP developer, and I am developing one webservice to create value contract from dotnet front end,
So user can enter inputs from that front end and he will get SAP generated value contract id.
Here I did validations for all the fields and giving error messages to restrict user to dont give incorrect values.
Now coming to my issue..,
While entering the PO Date in the initial screen of contract creation,
If I enter future date,
> The purchase order date lies in the future. Please check
If I enter the past date.,
> The purchase order date is in the past. Please check
I will get warning messages like this, so what should i do, I can enter, today's date to avoid these messages,
And I can neglect these two messages to proceed, as they are warings only.
But in my case , Can i process these messages to front end, Is it mandatory.
I want to know the intention of these messages, then i can proceed.
Thanks,
Naveen.I

Hi,
It is telling an information about the date status and n=it is not an error message.
so you can go ahead with this message.
If you want the same message in front end then you can write the logic in the dotnet prog.
Regards,
Sumith

Vendor Payment TC F-58/F-53, warning message for selecting NON DUE invoices

Hi,
I have scenario with my client, they want that during manual vendor payment against TC F-58&F-53, if the invoices are not due for payment but if selected by the user during manual payment, is there any configuration by which system will give a warning message to the user saying invoices are not due for payment before saving the document.
Thanks
MRS

You have to find the appropriate "Message Area" and "Message Number" in "Maintain Message Control".
Add the message into the Message Control and make it as WARNING message.
<< Moderator message - Point begging removed >>
<< Begging for points is against the furum rules. Repeated violation of forum rules can result in your userid being deelted. This is the third time you have been warned.>>
Thanks.
Edited by: Rob Burbank on Jan 18, 2011 3:57 PM

How to handle warning message for the fields in tab merging , PERSONAS 2.0

Hi all,
Please advice me on the below issue.
In a transaction VA32 , I have merged the fields from one tab to another tab using tab caching.
when i try to change the value of a merged fields , it throws the warnings message. So it is continuously looping from one tab to another tab.
So i tried to use the additional editor concepts in tab caching as below.
Looping is stopped and throws warning message in the same tab.
All the changes are saved successfully only when the enter button is clicked once in the main screen, else the changes are not saved and my previous value remains.
Anybody have an idea on how we can use Additional actions in Tab caching concepts.
Thank you,
Arun

Hi Kranthi,
When i try to save the fields which i merged from different tab is not saving.
Please find the below details.
Green highlighted fields are custom fields which is merged from different screen like header or item overview screen. This is handled in script button.
Red highlighted fields are merged from different tab like shipping or sales using tab caching concept.
While changing the value of the fields which is merged from different tab , and press ENTER then it throws the Warning message if occurs.
After warning message, if i try to save using the script button for copying all the custom fields which is merged from different screen , pasted it to their respective screens and also saved.
Its working fine.
When i try to save it before pressing ENTER button then the respective changes had made in the merged fields from different tab are not reflected.
How we can handle this issue?
Thank you,
Arun

Message for Material Document Generated

Hello Friends,
On creation of Production Order, we do picking of components thru CO27. After completion of this Pick, though goods movements ( mvt type 261 ) are successful we are not able to see the message stating material document number in status bar ( left bottom part of the screen ) as we get it in other cases/transactions. Are we missing any parameter settings pertaining to these kind of messages and T-code CO27. Kindly advice.
Regards
mahesh

Dear Ram
you are right. Since it is a mass transaction, it does create multiple documents ( probably my user never exploited the potential of this transaction and used it for single order only ). I tried it for multiple orders (3 Nos ) and results were as expected ( 2 documents got created ). But I didn't understand the system's logic of material document creation here, as it is observed that for one component it has created only one document for 3 different orders ( same batch nos) where as for other component it has created 2 documents for 2 different orders even though batch nos are same. All the components are consumed from same Storage location. I checked and compared both the documents but didn't find anything noticable. Any idea, what it could be?
regards
mahesh
P.S. : Mangal, Thanks for your inputs too.

Warning message for PI vendor change

Is there an existing warning message that I can use for when a PI vendor partner is changed in a PO?

Hi,
If you define a field in the vendor master record as "sensitive", the corresponding vendor account is blocked for the payment run if the entry is changed. The block is removed when a second person with authorization checks the change and confirms or rejects it.
Example
The alternative payee field has been defined as sensitive in the Customizing table. If the accounting clerk responsible changes the entry in this field in the customer/vendor master record, the account is blocked for the payment run until a second person with authorization confirms the change to the master data.
Please go through the customizing activity at:
SPRO--> SAP Reference IMG --> Financial Accounting --> Accounts Receivable and Accounts Payable > Vendor Accounts> Master Data> Preparations for Creating Vendor Master Data> Define Sensitive Fields for Dual Control (Vendors)
Regards,
Narayana.

Warning message for customers past due on payment

Hi experts,
I need help to create a warning message (or popup alert) on the delivery for customers that are past due on their payment. Please advise.
Thanks,
Jane

Hi Jane,
For all pop-up message, you need SDK. There is no simple solution for that.
If you just need an alert, you can create user alert to be send in a scheduled time.
Thanks,
Gordon

No Sun Studio 12 warning message for bitfield sizes?

Hi,
Does Sun Studio 12 support GCC bitfield sizes?
The FAQ for version 11 (http://www.genunix.org/wiki/index.php/Sun_and_GCC_Compiler_Portability) specifially says Sun Studio does not support it. But I do not get any warning message, with any version I have tested (10 & 12). Am I missing some compiler flag or is the C compiler just silently ignoring those?
Thanks!

ok I have just found that the -Xc option gives me the following warning:
warning: nonportable bit-field type
Does that mean that the compiler is understanding this, but just warning me that this is not portable across different platforms? This would be acceptable in my case...
Thanks!

Warning message for PO quantity

Hi Gurus,
When we load a sales order and user does not enter a quantity, system is not giving a warning message, i had checked incompletion procedure and made warning as ticked. but still system is not giving a warning message when user does not enter quantity field in sales order.
When trying to save system is displaying document incomplete, missing data quantity, but users are not getting a warning message.
Please advise us gurus,
Thanks in advance,
Nathan.

Hi nathan,
Check your setting for incompletion log.
in the incompletion log setting, for incompletion group Sales-item, within this group select your incomletion procedure (Which you have assigned in item category setting VOV7).
check whether you have maintained following entries:
table :VBAP
field: KWMENG
screen no:PKAU
status: 04
warning is ticked
seq: 10
Regards,
Chetan

Warning message for material substitution in ERP E-commerce

Similar Messages

Maybe you are looking for