Warning messages from ME_PROCESS_REQ_CUST method CHECK

Hello All,
I am facing below mentioned issue with BADI ME_PROCESS_REQ_CUST
1: how can we issue warning messages from BADI ME_PROCESS_REQ_CUST method CHECK?
2: Check method is called twice if I click on check button in ME52N.
Thanks

HI ,
You can use Below
include mm_messages_mac. "useful macros for message handling
if ur condition   .
mmpur_message_forced 'W' 'ME' '083' text-001 '' '' ''.
endif.
text-001 : text element   for your description .
BUt Warning Message will not keep the screen on error page . it will be better to use   'E' for error   if you want
mmpur_message_forced 'E' 'ME' '083' text-001 '' '' ''.
regards
Deepak.
Edited by: Deepak Dhamat on Oct 21, 2011 8:20 AM

Similar Messages

Warning message in me_process_req_cust badi - check method

Hi all,
I have implement me_process_req_cust badi and I want to give a warning message in check method. But it doesnt work. When I change the message type to E instead of W, it works. How can I give a warning message in check method? I will be very happy if you help me..
Thanks...

Thanks, but it didn't solve my problem. I still can't see my message..

Tcode DSWP, Determining warning messages from CCMS

We use SAP Solution Manager 4.0, SPS 13 for System Monitoring of almost 100 systems.
We configured SOLMAN as CEN system and activated the CCMSPING with push option.
For almost the 2/3 of the systems we configured SAPCCM4X agents.
Our current problem is a performance issue in tcode DSWP. When we try to enter into one of the solutions there (by pressing on it) we get the following warning:
Determining warning messages from CCMS
It tooks a while and then it is possible to access the desired solution.
My important question is of course:
How can this issue be solved?
Is there some techniques to analyse and change the problem
How can I check whether all the agents work in push mode and that we do not use standard CCMS methods that can cause the RFC load?
Thank you very much for any helpful information
Regards
Thom

Hi Thom,
Have you already installed CCMS agents, the will speed up communication? That's definitely required in your situation with many systems connected to SolMan.
See [http://service.sap.com/monitoring|http://service.sap.com/monitoring]
You can also check CPU, Memory, as recommended by Afi, but I expect that this will not be the bottleneck.
Response times depend on the number of connect systems, number of activated monitoring objects (MTE nodes), number of server, instances.
If you are not satisfied with performance, I would recommend to open a customer message on component SV-SMG-OP or SV-SMG-MON-SYS.
Best regards,
Ruediger

CCMS: Determining warning messages from CCMS

Hi!
We use SAP Solution Manager 4.0, SPS 13 for System Monitoring of almost 100 systems.
We configured SOLMAN as CEN system and activated the CCMSPING with push option.
For almost the 2/3 of the systems we configured SAPCCM4X agents.
Our current problem is a performance issue in tcode DSWP. When we try to enter into one of the solutions there (by pressing on it) we get the following warning:
Determining warning messages from CCMS
It tooks a while and then it is possible to enter into the solution.
My important question is of course:
How can this issue be solved?
Is there some techniques to analyse and change the problem
As I know there are two ways of sending/retrieving the data:
via RFC (pull)
via CCMS (push)
Which method is faster?
Is there some changes in CCMSPING possible? (interval for sending/retrieving the data)?
Is there some other settings (likw profile parameters e.g. rdisp/...) that could be performed to solve the problem?
Thank you very much for any helpful information
Regards
Thom

Hi Thom,
The CCMSPING agent uses two methods to check availability. One is to connect to the message server using "Ping monitoring" the other method is to check whether you can actually login on the application server and that requires an RFC connection. When you configure Availability monitoring you will see you can configure either or both methods depending on what your requirements are.
The data is collected and stored in a memory segment reserved for monitoring. The agent connects to this segment on your monitored systems and transfers it to your CEN at the set intervals where it is cached. Edit: sorry if confusing, this method used by sappccm4x agent. CCMSPING connects directly to your application server message service to check availability.
You keep asking which is faster but as mentioned you may require both methods depending on your requirements.
Factors like how busy your application servers are(RFC calls require free dialog work processes) and how long the agent should wait before receiving a response will effect the performance which is why you are able to adjust ping timeout and frequency. How many systems are being monitored and how much data is being transfered from those systems is another factor to consider.
Regards,
Nelis
Edited by: Nelis Lamprecht on May 15, 2008 3:11 PM

CCMS issue: "Determining warning messages from CCMS"

Hi!
We have a performance problem by accessing of solution in tcode DSWP.
We retrieve the warning: "Determining warning messages from CCMS"
In order to solve or analyse this problem I have the following questions:
1) How collects CEN the data from satelite systems?
1a) how? --> RFC, etc.
1b) mode? --> Push, Pull, etc.
2) How the data will be transfered from CEN to tcode DSWP?
Any helpful information will be appreciated.
regards
Thom

Hi Thom,
Have you already installed CCMS agents, the will speed up communication? That's definitely required in your situation with many systems connected to SolMan.
See [http://service.sap.com/monitoring|http://service.sap.com/monitoring]
You can also check CPU, Memory, as recommended by Afi, but I expect that this will not be the bottleneck.
Response times depend on the number of connect systems, number of activated monitoring objects (MTE nodes), number of server, instances.
If you are not satisfied with performance, I would recommend to open a customer message on component SV-SMG-OP or SV-SMG-MON-SYS.
Best regards,
Ruediger

Hyperlink warning message from HLINK.dll

Hi,
I have a access file (Created in Win Xp and Access 2000) which has forms. I have a hyperlink in one of the forms which opens a word file and merges data with the word doc.
Now I am supposed to make it work in Win 7 and Office 2010.
When I click on the link, it opens the file once and completes the procedure. As soon as this is done, I get warning message from HLINK.dll as "some files may contain viruses....etc". When I click OK, it open same file again does same processing. So
same file is generated twice.
I believe that if the warning message is suppressed, it wont generate second file. Please help me to suppress the warning message.
And if you feel there is some other solution to this, please suggest.
TIA
Regards,
Naresh

Hi
Naresh,
You may disable warning messages hyperlink in Office 2010 by the steps below:
===========
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious
problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs.
1.
Click
Start, and then click Run.
2.
In the
Open dialog box, type regedit, and then click
OK.
3.
In Registry Editor, locate one of the following registry subkeys:
o
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Common
o
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Common
NoteYou only have to modify one of these registry
subkeys. You do not have to modify both of them.
Note If the Security subkey already exists, skip to Step 6 after selecting the Security subkey.
4.
Click the registry subkey, point to
New on the Edit menu, and then click Key.
5.
Type Security, and then press ENTER to name the key.
6.
On the
Edit menu, point to New, and then click
DWORD Value.
7.
Type DisableHyperlinkWarning, and then press ENTER to name the entry.
8.
In the right pane, right-click
DisableHyperlinkWarning, and then click Modify.
9.
In the
Edit DWORD Value dialog box, click Decimal, and then type 1 under
Value data.
Note A value of 0 enables the hyperlink warning message. A value of 1 disables the hyperlink warning message.
10.
Click
OK.
11.
Exit Registry Editor.
For details, refer to the KB articles:
http://support.microsoft.com/kb/829072
http://support.microsoft.com/kb/925757
Best Regards,
Sally Tang

Is it posible to return warning message from HOST concurrent Program

Is it posible to return warning message from HOST concurrent Program?
Exit 0 -> successful
Exit >1 is an error
is there anyway to send the warning status through Host cooncurrent program ?
Thanks
Sachin

I do not have access to a test instance to try this, but I believe "exit 2" will make the host concurrent program complete with a warning status. Can you pl try this and post your results here ? :-)
HTH
Srini

How to send information/warning message from CRM to B2B application

Hi,
I need to send information/warning mesage from CRM to B2B application.
I am using FM CRM_MESSAGE_COLLECT to send the required message to application log first and then implemented a BADI called CRM_ISA_BASKET_MSGS for reading that message to dispay it in Internet Sales.
When I am passing message type as E in FM CRM_MESSAGE_COLLECT ,it is correctly showing it in B2B internet sales application as an error message but when I tried to pass message type as I/W it is not dispaying the message in B2B internet sales application although that information/warning message is being displayed in application log in CRM
Can anyone pls provide some useful inputs for passing information or warning message type from CRM to Internet Sales allpication??
BR,
Bykam

You need to fire the action from B2B, maybe when the b2b is all loaded you can call a FM in CRM that will handle some validations, this FM will return a result, store it in a session attribute, and put a condition in the JSP that will handle the response, inside this condition (if the attribute session is not empty) print a block, a label or something in html, css class will help to put some colors and maybe make a custom alert block.

Curious Warning Message From Adobe Flash Player

Hello everyone.
I have been getting a warning message that pops up every 3 or 4 days for the past couple of weeks. The message reads as follows:
"Adobe Flash Player has stopped a potentially unsafe operation. The following local application on your computer or network:
(object)
is trying to communicate with this internet-enabled location:
"mail.yimg.com"
To let this application communicate with the internet, click settings.
You must restart this application after changing your settings.
I am then presented with two boxes, one that says OK and one that says SETTINGS.
I have the latest Flash Player for 10.6.7 and have been clicking on OK and have never clicked on Settings because I have no idea what the object is ( the so-called local application is not listed or described) and I don't know what is meant by "this internet enabled location called ,ail.yimg.com. I don't click Settings because I'm concerned that I may be allowing an unauthorized communication with my computer.
Any information or recommendation to explore this problem will be greatly appreciated.
Thanks. Rich

I am familiar with the Adobe Flash Player Settings Manager where I have always limited the amount of space for sites to store information on my computer. In all cases also, I have checked the box to "always ask" before allowing sites to communicate with my computer. Most of these settings seem to involve the camera and microphone both of which I never use.
The document you sent me is very helpful but my problem is that the local application on my computer that is apparently trying to communicate to Yahoo Messenger is not named. It is simply called "object." The fact that it is unidentified makes me want to just click OK and not proceed any further to change any settings. I have added a picture of it to this e-mail. No one here uses Yahoo Messenger or Yahoo Mail.

Got warning message from SDN

Hello all,
Today i got an email that i was answering so many times the basic questions....i feel sad that i got a warning message that my account will be deleted..I am sorry first of all as i answered basic question, but the warning message which i got made me feel sad...As per my knowledge correct me if iam wrong i twice or thrice i answered basic questions. last year i didn't answer much and i also not aware of the rules and engagements which are changed from 2007 , unfortunately i got few messages from SDN and i rectified my mistakes and stopped replying to some questions for example copy pasting others code,questions related to dates, interview questions.....
I am sorry to the SDN for answering basic question for twice or thrice... But only thing which felt me very sad is the message which quotes my id will be deleted...
People still asking basic questions and interview questions..I want to know what are the steps that SDN is taking for the people who asking these type of questions.
Regards,
Nagaraj

> this is why because i am sure most of the people won't go through the links of rules of engagement..
I think everyone should invest some effort in reading rules etc. Those who are to lazy to do so will not have their questions answered by me. If we all refuse to answer basic questions asked by lazy people we will increase the value of the forums in general and especially the forum search.
So, in short:
stop answering basic questions and you'll help improve the forums
or
continue to answer basic questions and you'll only help lazy people for as long as your account will last.....
Your choice
Jurjen

A very new and strange warning message from my iPhone

I am getting a very new and strange warning message on my iPhone. The phone will repeatedly - even when sitting idle - flash a message that states, "This accessory not made to work with iPhone. Would you like to turn on Airplane Mode to reduce audio interference ... you will not be able to make or receive calls?"
This message started to flash up on my iPhone after I installed Leopard yesterday evening (11/15/07). I just updated my iTunes software today so I have iTunes 7.5 (19) and my iPhone software version is 1.1.2. Finally, I am not trying to hack my iPhone since I ain't smart enough to do so and, even if I were, I wouldn't want to have a dead phone on my hands.
Any suggestions or thoughts? Thanks.

Charles
I think my first instinct would be to try a Reset of the iPhone, if that doesn't improve things then try a Restore from within iTunes BUT.....
I would also wait awhile and see in anyone else weighs in with other suggestions first.
Good luck
FlatE

Warning message display for Price check-Sale order creation

Hi,
While creating sales order at line item level a warning message is required to pop-up after validating if the sale order line item's Net Price = Gross Price.
1.Is there any IMG customization that can be done to acheive this? If Yes, how??
2.If it can be done only by adding a required message to message class, could you pls tell me the form which may require modification??
Thanks

Hi,
Develope the logic in any of the following userexits avaialble in the program-
MV45AFZB
MV45AFZB
The requirement cannot be processed through Standard SAP behaviour.
Regards
Goutham

When throwing Warning Message from EOImpl, Text, Cause and Action is coming

Hi,
When I am throwing JBO Exception through EOImpl code, I am getting warning message with Text, Cause and Action, But my aim is to get only Text message.
/* Code used */
JboException e = new ApplcoreException("Message Code");
e.setSeverity(JboWarning.SEVERITY_WARNING);
throw e;
/*end*/
Please suggest some approach.
Thanks
Ankur

Applcore is not availble to the Outside world , so better to post this on the internal ADF Frontend forum.
I suspect there might be another API to do this .

Warning message from nowhere.

After months of editing in Adobe Camera Raw with no problems, I go to edit this morning and this lovely warning message greets me.
Camera Raw editing is not enabled. then this below...
Camera Raw editing requires that a qualifying product has been launched at least once to enable this feature.
What does this mean???

I've been having the same problem, but I don't have any trials installed -- all I've ever had on this machine is a registered version of Creative Cloud. But I DO have an issue where CC keeps signing me out.
So, for anyone else with the same problem who DOESN'T have any trials installed, what worked for me was to shutdown and repair permissions -- even though I hadn't installed anything new, either.
*shrug*

Cannot remove warning message from screen

I work remotely and use Outlook Web App to access my emails.
Everything works fine other than I always get this warning message:
which I cannot remove as the 'Continue' option is unresponsive to clicks.
Anyone have any ideas how to cure this??
Many thanks.

The server has a self-signed certificate, which means that the people in charge of it don't know how to do their job. That's not a problem I can help you with. However, the warning dialog should not be unresponsive.
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Warning messages from ME_PROCESS_REQ_CUST method CHECK

Similar Messages

Maybe you are looking for