Warnings 30010 and 30061
Our customer has one root domain and one child domain. Only root domain was prepared for Lync deployment, he don’t want synchronize child domain. After deploying Lync 2013 there were warnings 30010 from LS User Replicator in Lync Server
event log every 5 minutes:
Failed to get a connection to a domain controller in domain child.root.sk that User Replicator intended to synchronize.
This prevents User Replicator from synchronizing this domain.
The error that occurred was 81 (Server Down). The source of the replication is AddressBookReplication.
To resolve this warnings I try solution in http://lyncdude.com/2013/08/28/lync-20102013-error-event-id-30011-source-ls-user-replicator/.
The warnings 30010 disappeared but there are other warnings 30061 from LS User Replicator in Lync Server event log every 1 hour:
Failed to synchronize remote domain vuje.sk due to missing data privacy boundary for local or remote domain. Source of replication is: LocalRegistrarReplication.
Resolution:
This is usually caused when privacy boundary is not associated with local or remote site.
I can’t find any solution. Can somebody help?
Hi,
Which server edition of Lync server did you use (Standard edition or Enterprise edition)?
The error 30061 means: The SQL Server failed to create full-text filterdata directory. This might be because FulltextDefaultPath is invalid or SQL Server service account does not have permission. Full-text blob indexing will fail until this issue is resolved.
Restart SQL Server after the issue is fixed.
If it is Enterprise edition, please double check the permission of SQL Server service account.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support
Similar Messages
-
Adobe Creative Suites Web Premium - Warnings, Errors, and Problems
I just recently installed Adobe Creative Suites Web Premium 5.5, i am experiencing the following errors below
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 2 error(s), 1 warning(s)
WARNING: DW065: Display requirements not met for {B4749B38-C5BD-4A02-8E9F-C1EF7CCEA651}
ERROR: DW020: Found payload conflicts and errors:
ERROR: DW020: - Adobe Flash CS5.5 depends on Adobe Flash Player 10 Plugin to be installed.
FATAL: DW020: Conflicts were found in the selected payloads. Halting installation.
System Specs
HP Pavillion Dv6 nootebook PC
Intel core i5WARNING: DW065: Display requirements not met for
Your screen resolution is too small. Refer to the system requirements and adjust them accordingly.
Mylenium -
Flex build errors and warnings not in English but in Dutch
Hello Flash Builders,
I'm using Flash Builder 4 beta and both Flex SDK 3.4 and 4.0 beta 2. The problem I have is pretty annoying. Many error and warning descriptions, which you see in the "Problems" pane in Flash Builder, are in Dutch. Why? I do not know. I never told it to and I can't find anywhere in the settings an option to change it. I did not download the Flex SDK in Dutch, if that's even possible. Unless they forced me to, because they found out I live in Holland I think I would like Dutch compile error descriptions.
Though I am Dutch, most of the time the Dutch descriptions are fare more difficult to understand than the English versions. And looking up an error when you don't know what it means is also pointless, cause the most common language on the net is ofcourse English and not Dutch.
Someone knows how to change the language of the compiler error and warning descriptions?
Any help would be great!
Many thanks.Hi,
DBNetLib (Database Network Library) errors occur when the BizTalk Server runtime is unable to communicate with either the MessageBox or Management databases. When this occurs, the BizTalk Server runtime instance that catches the exception shuts down and
then cycles every minute to check to see if the database is available.
Check if there is any server restart activity happening every night?
Alternatively, you might need to
Set the SynAttackProtect registry setting as described in
http://support.microsoft.com/kb/899599. Additionally,
look at the Group policy for that SQL server to be sure that the Group Policy does not periodically UNDO the setting change that you did above.
Refer:
[DBNETLIB][ConnectionWrite (send()).]General network error. Check your network documentation.
Other possible causes could be
1) Low hardware specs (Could be hard disk memory issue, check the free space on the server)
2) Sharing one server or disk for more than one group of BizTalk databases
It could also be a network card issue that could we worked around by turning off TCP Chimney using the following command:
Netsh int ip set chimney DISABLED
For more information, see
Microsoft support article 942861.
Refer for details:
Avoiding DBNETLIB Exceptions
Similar issue reported here ->
BizTalk service stopping automatically.
Also refer this link and look into the description of Error 6,10 and 11.
BizTalk - Errors and Warnings, Causes and Solutions
Rachit
Please mark as answer or vote as helpful if my reply does -
How to get Flash Builder problems tab (warnings and errors) in english
Hi,
my Flash Builder installation is showing the warnings and errors in Finnish. I get the idea behind this and the reason is good, as I'm native speaker of the language. Nevertheless it has some drawbacks when trying to resolve the issue by googling the error because Finnish is pretty marginal language and almost every Finnish Flex developer writes his/her posts in English. So either I have to try to guess the problems correct translation in English, which can be hopeless, or try to google it in Finnish which, as said, returns about zero results.
That said, I'm wondering if it's possible to change the warnings and problems in English? Do I need to reinstall Flash Builder to accomplish this?
Best regards,
Jukka HämäläinenHi, thanks for fast reply.
Unfortunately I already tried that with no success. The strange thing is, that in my Flash Builder plugin directory in eclipse.ini the language was already declared as follows:
-nl
en_US
Didn't even touch that, it was there before and still my errors and warnings were (and still stay) in Finnish (everything else in Eclipse is in English).
Any thoughts?
Cheers,
Jukka -
MultiProvider design CMP Warnings
Hello,
I'm trying to activate a MultiProvider using some infocubes including 0PA_C01 and 0PAOS_C01. When I check some warnings appears, among others:
Check of MultiProvider ZM:
Error messages from point of view of OLAP processor:
CMP problem occurred in characteristic [ZRUTA]Rutas for InfoProvider 0PAOS_C01
CMP problem occurred in characteristic [ZSTOR_LOC]Storage location for InfoProvider 0PAOS_C01
CMP problem occurred in characteristic [ZRUTA]Rutas for InfoProvider 0PA_C01
CMP problem occurred in characteristic [ZSTOR_LOC]Storage location for InfoProvider 0PA_C01
CMP problem occurred in characteristic [ZRUTA]Rutas for InfoProvider Z0PY_C02
as I can see it's because I'm using some characteristics that exists at some infocubes but not in the infocubes that originated warnings listed above. When trying to activate, Multiprovider activation is succesful, but when trying to retrieve info using Query Designer queries any info about involved infocubes is not available.
Has anyone experienced situations like this and what solution worked to fix it? what action(s) should I take into account?
Hope you could help me. Thanks a lot in advance.
BernardoHi,
Our EDWH landscape was on SPS 13 earlier, for sreolving certain other issues SAP suggested us to with SPS 16 Upgrade. Post SPS Upgrade in our development system, when we tried to activate the Multiprovider we have faced this warnings of CMP( Common Multi Provider) mentioning about the Compounding Infoobjects.There has been no change the struture post SPS, but still we received this error messages, when contacted SAP for the same, it suggested to insert the values mentioned by Jose in RSADMIN table, which will convert the errors to warnings.
Even though the struture remained the same post SPS, these warnings are and added feature after SPS 13.
There is no problem after this data insertion in the RSADMIN table.
Regards,
Ganesh Thota. -
Missing image links NOT alerted, and not in Links panel
Don't know if this is a consequence of shifting my files and account across to a new Mac Pro, and re-configuring hard drive locations where linked image files are, but... I'm working on a document that spanned systems - finally coming to completion, and I'm writing the print PDF and found this problem.
InDesign CC 9.2.1 running on Mavericks 10.9.2 is NOT indicating missing links images in the Links panel. In fact it's not indicating the image on the page is even in the document - it doesn't appear in the Links panel, even though I see the image on the page.
I noticed this when proof checking a high res print PDF, and the image looked low-res. Odd as it shouldn't be. Went back to InDesign file to interrogate the image, and found when I clicked on it, it wasn't highlighted in the Links panel - where I have the Warnings, dpi and other columns active so I can quickly check problems. It wasn't there at all. InDesign seems to be blind to the image. When I right click the rogue images on the page I don't get the 'Graphics' section at the bottom of the drop down menu as I do with ok images. I guess because InDesign doesn't even know it's there?
Basically the image is visibly on the page, but InDesign doesn't appear to know about it..... What gives? I'm having to go through a long document now clicking on each image to check it's showing in the Links panel, then relinking every image that appears to be completely lost as far as InDesign is concerned not even knowing it's there.
I have "Reset All Warning Dialogues". Made no difference.
I worry about what other files are going to do this to me now and how much time will be wasted carefully checking validity of every image.Thanks Peter, maybe that's it although I don't recall using that method of putting the image in the layout. It's not something I would normally do. Its some months ago mind you, and the client did send me a bunch of images to consider using so I may have just dragged their images into my early layout while scamping up the first draft, and it may be these images that have been 'lost' by I.D.
I normally create an image frame into which, using Edit - Place, select the image from a folder on the drive.
Sometimes (because the preview of images in the ID Place dialogue is so slow to build) I view images in a Finder window and select from there, drag-and-drop into a pre-sized Image frame in I.D.
I may have dragged an image direct from the Finder into Indesign not first creating an image frame for it to be placed into. But I thought I.D. would still note it as a Link asset, else why allow images of any kind into the layout if Links doesn't keep track of them for pre-press proofing use etc.
The (in the end just 4) images that were completely unknown to InDesign were all in image frames, scaled and cropped within the frame bounds. So I wasn't to know months later that I may have drag-dropped the image files uncropped etc into ID then subsequently cropped them (if indeed I had).
If you're suggesting this method of adding images quickly into I.D. won't list them in the Links panel, then I will make a conscious effort never to use that quick method again! -
Font Book: Managing Fonts, Duplicates, Warnings etc... Need Help!
How this all started...
I have a lot of fonts. I use them for design purposes, and recently added a bunch of new ones.
As a result, I had a problem with an Adobe program and the font displayed in the workspace.
I figured out which one caused it and deleted it. (I've never used it before, and it wasn't a common font, so I didn't really care).
Problem with that solved.
So I figured that I ought to go through Font Book and check everything else and started Validation (under User).
I had several Errors, Duplicates and Warnings.
I (maybe naively) allowed Font Book to "Resolve Duplicates".
QUESTION 1 (a) (b): Could letting Font Book resolve duplicates create any problems? and how does it decide what to trash?
I also let Font Book move all the Error fonts to my empty Trash Folder.
- I then moved all those to an empty folder on my desktop.
I then moved all the Warning Fonts to another empty folder on my desktop.
So now, in User fonts, there are currently no problem messages.
This is where it gets a little trickier...
In "All Fonts" or "Computer" there are no caution symbols adjacent to any fonts, but if I run Validation, I get a lot of duplicate fonts.
For example... Arial exists in:
Library/fonts
User/Library/fonts
Library/Fonts/Microsoft
QUESTION 2: Do I need to address these? and if so, will that have an effect on any programs that use those fonts?
* I did some research on this, and found an article at Mac World, discussing this, but I don't feel any better/wiser after reading it or the comments...
"Problem" since resolving duplicates and/or moving warning and error fonts (from User):
Since I resolved duplicates, and moved the error and warning fonts, I've noticed some "minor" changes in appearance with websites.
Such as in Hotmail, and a website that I'm a member; the font displayed is now just slightly different.
Albeit, the difference is very subtle, (but as a designer, I noticed this right away) and my concern is how this may affect any design work I do, if somehow the change I'm seeing is more of an error.
* I have to make an assumption that its a font used in scripts (like Arial, Helvetica, etc, etc) that use my fonts for display.
QUESTION 3: So the big question is, how the heck do I address that now???
About the Warning Fonts:
For the most part, the fonts that came up as "minor warnings", showed the message 'kern' table structure and contents.
- I know that "kern" is suppose to be the spacing between characters.
QUESTION 4: So, why does Font Book care and warn about the "table structure and contents" of font spacing between characters, for any font???
QUESTION 4b: If that's NOT what that means, then I'd appreciate a plain English definition (perferably a source from Apple directly).
Caches:
I'm seeing changes on the fly with fonts (and the display on websites), if I try and move fonts that had warnings like Arial styles or Helvetica styles back to my User Directory, so I'm guessing that Font Caching isn't affected by this.
If anyone is going to suggest that I deal with the font cache (since I've read several questions on this topic already), I'd appreciate some explanation about WHY I would need to address font caches and HOW they might be affected in respect to your suggestion and the problems I'm having.
Additional Information:
I use a MacBook, Mac OS X 10.6
~ If there's some other information that you may need from me, then please ask away... I need to figure this out, and Font Book is driving me crazy!!!Yes hindsight is 20/20. I realize now that I should not have allowed FB to do what it asked. (But that's a moot point now).
Having a large number of fonts is something I've always had for design purposes. I never had issues with fonts on a PC, and didn't expect these sorts of problems on a Mac. And how is someone suppose to know NOT to trust a pre-installed program that's suppose to MANAGE your fonts???
I don't touch the system fonts. I am well aware that they can't be deleted, nor do I add any fonts to that directory.
I agree... I need to narrow down the issue. That was the whole point of posting this!
I do keep backups of my system and files. I have considered just replacing the font folders with what I had before, but it just brings me back to where I had all the warnings, errors and duplicates... And I'm not entirely sure if and how that could affect the font caches, and if I would need to then address those. I've been researching this quite a bit, but so far, all I've found is complaints or questions from people with similar problems. For whatever reason, very few people seem to want to offer help with this kind of problem (but I thank you for at least trying)...
With Dreamweaver, its not quite that simple. If it was, then I wouldn't need the help. Even if we disregard the issue I have with Dreamweaver, the problem also exists on some websites, webmail, etc. Websites (and Dreamweaver) use standard font families and display their fonts from YOUR installed fonts. The font problems I'm have online are not missing fonts, they are just not the same font in size or appearance that they were before (and no, my webmail, and these websites didn't change. I had someone give me some screenshots to confirm). But I can't figure out exactly where the problem is, because it appears that I DO have the standard fonts. It could be that FB removed a version that was better than what was left behind, or it could be something else.... I have no idea anymore. I'm just getting more frustrated. -
Flat file as source and target in owb-error
hi,
I want to run an interface with source as flat file and target as rdbms table.
The mapping got deployed with warnings.
And when i run the mapping i get the below error.
ORA-04063: package body "Schema.project_name" has errors
ORA-06508: PL/SQL: could not find program unit being called: "schema.project_name"
ORA-06512: at line 1Hi
There's nothing wrong with your theory, however you might get a DB lock depending on the locking strategy of your RDBMS and it's current configuration.
Now, assuming that DB locking is your issue (get a DBA to check when the dataflow stalls), there are 2 solutions.
1, change the DB lock settings
2, take a copy of the target table in a new dataflow and use that as the source in the orginal dataflow.
Michael -
i am new to oracle i am writing a stored procedure of about 1600 lines when i compiled the stored procedure
it is giving me warnings AND not any error and got compiled successfully which i write below
warnings
Warning(6,2): PLW-07203: parameter 'P_RN' may benefit from use of the NOCOPY compiler hint
Warning(168,72): PLW-07204: conversion away from column type may result in sub-optimal query plan
Warning(169,48): PLW-07204: conversion away from column type may result in sub-optimal query plan
Warning(1,1): Only first 20 issues are reported -- coming at last
and when check the status of the stored procedure by running the below query
informing that object is INVALID
select status from all_objects where object_name='USP_GENERATERUNNINGNUMBER';
and as far as i know that if warnings come and no error then it means procedure has been
compiled successfully and becomes VALID
please help me somebodythanks for your reply but its status is coming INVALID this i am not understanding when the procedure has been compiled its status should become valid and this also giving me this message
Warning(1,1): Only first 20 issues are reported
what i am thinking that after 20 warnings there may be a error which it is not showing
please guide me in this aspect -
How do I remove Avast from Safari?
"Avast" is perhaps the worst of the whole wretched lot of commercial "security" products for the Mac. Not only does it fail to protect you from any real danger, it throws false warnings, destabilizes and slows down the computer, and sometimes or always corrupts the network settings and the permissions of files in your home folder. Removing it may not repair all the damage.
Back up all data, then remove "Avast" according to the developer's instructions. Restart.
If you tried to remove Avast by dragging an application to the Trash, you'll have to reinstall it and then follow the instructions linked above. -
PCP0. not displaying messages errors and lights advice.
Hi Gurus,
I have one question:
In transaction PCP0 (Display Posting Runs) when we process the document, we go to report u201CDisplay Payroll Documentu201D and If in this report we go to Menu Goto --> Revision Item, we can see the document consistence.
If the document processed is inconsistent, shouldnu2019t appear messages error with some lights yellow and red to advice the user? For example, if there is some problem with the cost center, it must appear a red message right? This is not happening.
The user told us that when he verified the simulation document, he used to see this kind of warnings. And now there arenu2019t any advices, so the trial balance sheet becomes unbalanced.
So someone now´s how can I resolve this issue?
Best Regards,
Bruno Silva
Edited by: Bruno Silva on Feb 4, 2009 12:48 PMPlease check this link to help understand the reported issue.
[https://www.ucflex.uc.edu/help/nav/payroll/course/payroll%20processing/file2385/index.htm]
In MEP system, the step 4 5 6 7 8 9 10 are being ignored.
This is very critical because the users donu2019t have access to the screen that show if the document is correct or incorrect, and therefore the trial balanced sheet becomes unbalanced and they donu2019t know why.
Best regards
Bruno Silva. -
How to compile this without warnings?
Hello,
I am learning generics, and I grasped concepts but still get stuck with this:
Properties props = System.getProperties();
List propsList = new ArrayList(props.keySet());
Collections.sort(propsList);
for (Object key : propsList) {
out.println(key + " = " + props.getProperty((String)key));
}I get 3 warnings from the compiler and was not able to get rid of them. Thing is that I don't understand what to do with Set<K> which is returned from props.keySet(). I tried to make List<String>, List<? extends Object>, List<? super String>, it was only guessing, so I would appreciate quick explanation how to make this compile without warnings.
And warnings I get are:
warning: [unchecked] unchecked call to ArrayList(java.util.Collection<? extends E>) as a member of the raw type java.util.ArrayList
List propsList = new ArrayList(props.keySet());
^
warning: [unchecked] unchecked conversion
found : java.util.List
required: java.util.List<T>
Collections.sort(propsList);
^
warning: [unchecked] unchecked method invocation: <T>sort(java.util.List<T>) in java.util.Collections is applied to (java.util.List)
Collections.sort(propsList);
Thank you!ndario wrote:
OK, List<String> is what I want, but I can't get it as
List<String> propsList = new ArrayList<String or whatever>(props.keySet());
The constructor you use here does not allow for what you intent to do, right. But all the constructor does is to create a new list and add all elements from the set. This can also be done by creating the list first and adding the set's element in a loop, ensuring to convert each element to the desired type.
Thing is that I am not looking for a solution to this problem (there are many ways to sort keys of Properties) but trying to learn something about generics. I was interested what needs to be done to compile the code snippet from the first post without warnings. Is it possible at all?Sure, I already told you what you need to do:
1. Define the list as I did in my first posting
2. Define your own Comparator<Object> to be passed as second parameter to sort(). -
ITunes won't sync a huge portion of my music files to my iPhone
Syncing my iPhone5s leaves enormous and seemingly random (though always the same) swaths of mp3s grayed-out ("dotted circle") or simply not copied from iTunes to mobile device (iPhone). The most warning I ever got was, I used to get a pop-up on the iPhone screen reading, "iTunes Sync -- [x] items could not be synced. See iTunes for more information." This number varied: [x] might be 24, 49, or 1,260, but iTunes itself gave me no warnings, alerts, or info of any kind.
I have restored from backup, I have restored to factory settings, I have manually deleted all music and re-synced, I have selected and unselected, checked and unchecked, manually copied and let iTunes do it, I have turned on and off iCloud and tried all of these steps again. I have turned on and off the setting to convert higher bitrate files. I have reset warnings over and over and over and over between each of these steps, hoping for SOME kind of "more information."
Somewhere along the way it stopped even telling me on the iPhone screen that files "could not be synced." Now it just goes through the motions, sits for a while thinking on Step 4 of 4 (ostensibly copying the files), and then returns control of the application and the device to me, as if it has completed the task. Nothing has changed and 1000s of files are still not being copied over. Files that WERE there on previous versions, prior to me deleting all the files in an attempt to get on just a small number of new ones.
I have tried every single base-level piece of advice I've found online or in any Apple Discussion post.
The files that won't copy don't have anything in common I can find. Furthermore, what iTunes says is on the phone and what the phone tells me it has does not match — in iTunes, if I select the phone and navigate to the playlists, for example: I am told that all tracks from the Tintin Soundtrack ("Adventures of Tintin" makes it alphabetically first and so it stands out as an example) EXCEPT tracks 6, 8, 9, and 10 are available. 6, 8, 9, and 10 are gray-circled out. However on the iPhone I only see track 1 of 18. No gray circles. Just 1 track. These tracks are all the same bitrate, same ID3 metadata, same file location. They all play fine in iTunes and I cannot see what would make one file copy several files *seem* to have copied, and some files not copy at all.
I am past angry. I feel defeated by the computer and on the verge of tears. What the ****, guys? What the f***, Apple?
I have an iPhone 5s.
iOS updated, v8.0.2 (12A405).
iTunes updated, v11.4 (18).
I am on OSX v10.6.8, 2.16GHz Intel Core 2 Duo processor, 2 GB 667 MHz DDR2 SDRAM memory.
I have my iTunes library spread across two external HDs, but this has never given me trouble in iTunes (well, it's incredibly slow ever since v11 came out, but it finds and plays files 100% of the time, in iTunes), and again, there is no pattern I can find between the files that do and do not copy. Certainly not location or drive or anything (alas).
Please help...?I had this problem. Then I changed some of the music in my iTunes (manually going through to make an album "part of a compilation" just because another Artist happens to contribute to a song, so iTunes assumes its a different album?). I then tried to sync but only some of my music came across, got the circles too. I did a restore of my new iPhone 6 Plus and setting it up as a new phone and synced again, but then noticed some other albums needed updating on the library so did that, tried to sync and it won't. Same songs not coming across as before. I am in the process of deleting the library from my phone and will try again. Otherwise, I have to do another restore and try again. Will have I have to restore and start from scratch every time I manually update my library? iTunes needs sorting out!!!!
-
Error in installing Photoshop CS5 extended.
I'm trying to install Photoshop CS5 Extended on my laptop (win 7 64 bit), and I always get a installation error.
The error is "There were problems with your installation. Some required components may have failed to install. This could impact the functionality of installed applications"
When I click on troubleshooting it says there were 42 errors and 39 warnings =/
Antivirus and Firewall is turned off
Any ideas what the problem could be?I'm having the same problem,here are the error code..
Please Help
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 45 error(s), 41 warning(s)
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
ERROR: Payload {1D830E80-28A4-11DF-A025-0024E8692489} has an action "install" but no resultState
ERROR: The following payload errors were found during install:
ERROR: - Adobe CSXS Infrastructure CS5: Install failed
ERROR: - Microsoft_VC90_ATL_x86: Install failed
ERROR: - Adobe Linguistics CS5 x64: Install failed
ERROR: - Microsoft_VC90_CRT_x86: Install failed
ERROR: - Adobe Photoshop CS5 Support: Install failed
ERROR: - Adobe Bridge CS5: Install failed
ERROR: - AdobePDFL x64 CS5: Install failed
ERROR: - Microsoft_VC80_MFCLOC_x86_x64: Install failed
ERROR: - Adobe XMP Panels CS5: Install failed
ERROR: - Adobe Player for Embedding: Install failed
ERROR: - Photoshop Camera Raw: Install failed
ERROR: - AdobeColorCommonSetCMYK: Install failed
ERROR: - AdobeHelp: Install failed
ERROR: - Adobe Mini Bridge CS5: Install failed
ERROR: - Microsoft_VC80_CRT_x86_x64: Install failed
ERROR: - AdobeColorJA CS5: Install failed
ERROR: - Adobe ReviewPanel CS5: Install failed
ERROR: - Photoshop Camera Raw (64 bit): Install failed
ERROR: - Microsoft_VC90_MFC_x86: Install failed
ERROR: - Adobe Photoshop CS5 Core_x64: Failed due to Language Pack installation failure
ERROR: - PDF Settings CS5: Install failed
ERROR: - AdobeTypeSupport CS5: Install failed
ERROR: - AdobeColorVideoProfilesCS CS5: Install failed
ERROR: - AdobeColorCommonSetRGB: Install failed
ERROR: - Adobe Player for Embedding x64: Install failed
ERROR: - Required Common Fonts Installation x64: Install failed
ERROR: - Microsoft_VC90_ATL_x86_x64: Install failed
ERROR: - Adobe CSXS Extensions CS5: Install failed
ERROR: - Microsoft_VC80_ATL_x86_x64: Install failed
ERROR: - AdobeOutputModule: Install failed
ERROR: - Microsoft_VC90_CRT_x86_x64: Install failed
ERROR: - AdobeCMaps x64 CS5: Install failed
ERROR: - AdobeTypeSupport x64 CS5: Install failed
ERROR: - Microsoft_VC90_MFC_x86_x64: Install failed
ERROR: - Adobe Photoshop CS5 International English Language Pack_x64_AdobePhotoshop12-en_GB_x64: Install failed
ERROR: - Adobe WinSoft Linguistics Plugin CS5 x64: Install failed
ERROR: - AdobeColorEU CS5: Install failed
ERROR: - AdobePDFL CS5: Install failed
ERROR: - AdobeCMaps CS5: Install failed
ERROR: - AdobeColorNA CS5: Install failed
ERROR: - Microsoft_VC80_MFC_x86_x64: Install failed
ERROR: - Adobe SwitchBoard 2.0: Install failed
ERROR: - AdobeColorPhotoshop CS5: Install failed -
Getting schema validation working in Eclipse with Coherence 3.7.1.0
Just wondered if anyone had got schema validation to work in Eclipse (3.5 - Galileo) for Coherence 3.7.1.0?
The Coherence developer docs show that you should add sections like this:
<pof-config xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns="http://xmlns.oracle.com/coherence/coherence-pof-config"
xsi:schemaLocation="http://xmlns.oracle.com/coherence/coherence-pof-config
coherence-pof-config.xsd">
However, if I use that "shortened" form (for cache, pof, etc. configs) Eclipse gives a warning "No grammar constraints (DTD or XML schema) detected for the document." and the schema validation fails to work (i.e. no "auto pop-ups" when entering content, and rubbish content is gladly accepted.)
In Coherence 3.7.0, I'd used the following "extended" form (note the longer "schemaLocation") to get things working correctly:
<pof-config xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns="http://xmlns.oracle.com/coherence/coherence-pof-config"
xsi:schemaLocation="http://xmlns.oracle.com/coherence/coherence-pof-config
http://xmlns.oracle.com/coherence/coherence-pof-config/1.0/coherence-pof-config.xsd">
Also note that entering the "http://xmlns.oracle.com/coherence/coherence-pof-config/1.0/coherence-pof-config.xsd" in a web browser opens the xsd, as you'd expect.
Now...
I'm looking at the PofAnnotationSerializer in 3.7.1.0 and the "auto indexing" option. The declaration in my pof file for it fails as the "class" (or fully-qualified java.lang.Class version) in the "init-params" section isn't valid. If I look at the xsd on the url above, this is indeed the case, that option does not appear.
However, if I look at the POF xsd in the coherence.jar file for 3.7.1.0, the "class" option has been added, and has a newer 'version="1.1"' added to it's schema declaration. So I therefore tried to point my "extended" declaration to point to " http://xmlns.oracle.com/coherence/coherence-pof-config/1.1/coherence-pof-config.xsd", in order to get schema validation to work in Eclipse with this new schema. Unfortunately that url doesn't exist - you get a "Content Server Request Failed" error.
So, I guess my question is, is there a way to get myself pointed at the 1.1 versions of the xsd's so I can have schema validation working in Ecliipse? Or is there another workaround (did a bit of Googling, but that mainly seemed to be people switching validation off to simply get rid of the error...)
Cheers,
SteveCheers, Dave.
I had in fact had a try at extracting the xsd and pointing to it directly, and that did indeed work (had to do this following the same steps shown below using an "entry" in the XML Catalog.)
I had a look around at some of the other "entries" in Eclipse by default and noticed that they actually refer to xsd's directly within the jars, hence saving the extraction step and keeping screw-ups down to a minimum; a bit of playing around to get the syntax right and I finally managed to get it working.
For those who are interested (NB. my Coherence 3.7.1.0 install is in a directory "c:\coherence3.7"), the steps are:
In Eclipse, Go to Window->Preferences->XML->XML Catalog. Then create a "User Specified Entry".
In the "Location", add (without the quotes): "jar:file:/C:/coherence3.7/coherence/lib/coherence.jar!/coherence-pof-config.xsd"
In the "Key Type", add (without the quotes): "Namespace Name"
In the "Key", add (without the quotes): "http://xmlns.oracle.com/coherence/coherence-pof-config"
The schema validation now works fine. Eclipse shows no warnings/errors, and the auto-complete and validation are fully functional.
Still, it would be nice to get the "1.1" urls updated to point to the schemas on the Oracle site, to avoid all our developers from having to make these changes (and of course avoid them pointing at an older, out-of-date local install of coherence.)
Cheers,
Steve
Maybe you are looking for
-
I have been preparing photos for export and found some have a thumbnail but no image, only the exclamation mark upon selection. I have restored three 'broken' thumbnails via Time Machine. I want to indentify all the broken thumbnails so I can choose
-
Problem adding item to list using a function. Error - Null pointer
Hi Guys, I'm not sure what the problem is, but for some reason I am unable to add an item to a list using a function. I can add an item when I call it in the same function that the list is created, but I cannot add the item from anoter function. Here
-
Installing and Running Air application from webpage
Hello , I am trying to run the air application from web page and its working fine in my system. (http://localhost:8080/examples/test1.html) if i try to run the same air application from another system's webpage by pointing the url to my system's IP A
-
Hi, Is it possible to only crop the sides of a clip in iMovie, I know that picking the diagonal expands or decreases the image but then I only want to lengthen the clip at the sides rather than having the overall shape widen when I drag either side.
-
How to check granted privileges on role.
Hi, Can any one explain how to check granted privileges on role. I have created one role called ALL_SYSPRIVS but I forgot what privileges granted to this role Thank you...