Warranty for components

my reuqirement is Iam creating Laptop(asset) as equipment in ie01 ,
i need to maintian warranties for Laptop which is header one
under this i need to maintain warranties for componets of laptop example ,anti virus( expiry of anti virus ) and key board warranty perios and some other soft wares warranty details
for above requirement
i created laptop as equipment and i maintained the warranty for laptop and  componets of laptop like anti virus, monitor and key board  i maintained as charctertsics, i asiged this chartceristcs to Laptop(eqipment in ie02)
but my requirement is i need to  maintain waranty for compoents  of laptop also
how can i map this requirement

Hi Sukender,
  I think you can map this requirement better by making monitor, keyboard and antivirus as sub-equipment. I guess the warranty provided to the laptop and to anti-virus,etc will be different , hence you can have different warranty for all the sub-equipment of a superior equipment.
   With a BOM like structure ,for the equipment, you can't map the warranty requirement. More ever i would suggest you to cretae a template reference superior equipment and then with copy referenece , you can create the equipments (laptop).
Also if you have created charecterictics say as hours for the laptop,then with the BOM like structure you will not be able to assign the same to the anti-virus. So in  your case its beneficial to have equipment hierarachy to have different warranties.
Regards
Harish

Similar Messages

  • Customer service warranty for components in an equipment

    Hi Friends
    Pl guide me how to configure the warranty for an equipment where only few components only will be replaced free of charge to the customer during warranty few components are charged during warranty, how to bill for the components that will be charged during warranty.
    Thanx and regards
    syed.

    I, too, had to followup via telephone with Tech. support in the Philippines.
    They dropped the ball, but quickly regrouped and the process is back on track to attain a fix.
    Apparentely, there is a "Service Depot" in San Jose, TX (SAT).
    I did not experience "hold times, " so only can advise to telephone back, take names and notes.
    Ask to speak with a supervisor, if at all possible, try and remain somewhat calm.  

  • Rule based ATP is not working for Components

    Hi All,
    Our requirement is to do availability check through APO for Sales order created in ECC,so we are using gATP.
    Requirement: We are creating salesorder for BOM header (Sales BOM) and avaialbility check should happen for components i.e. Product avalaibility & Rule based substitution.
    Issue: Product availiabilty is working for components but rules based substituion is working,  mean Rules are not getting determind for components.
    Settings:
    - Header doesnot exist in APO and compnents do exist in APO
    - Availability check is not enabled for header item category and enabled for Item category for components
    - Rules have been created for Components in APO
    - Rule base ATP is activated in Check instructions
    We have also tried MATP for this i.e. PPM created in APO but still didn't get the desired result.
    If we create salesorder for the component material directly then Rule based ATP is happening, so for components Rule based ATP is not working.
    How do we enable enable Rulesbased ATP for components, i mean is there any different way to do the same.
    Thanks for help.
    Regards,
    Jagadeesh

    Hi Jagdeesh,
    If you are creating BOM in ECC and CIFing PPM of FG/Header material to APO, I think you need to CIF Header material, too, with material integration model.
    Please include header material in you integration models for material, SO and ATP check as well.
    For component availability check, you can use MATP; but for MATP, FG should be in APO. You need not to CIF any receipts of FG (stock, planned orders, POs etc), so that MATP will be triggered directly. Then maintaining Rules for RMs will enable to select available RMs according to the rule created.
    Regards,
    Bipin

  • Material, service and warranty for single product

    Hai all,
    I have to do a scenario like this..
    I have to sold a DG set to a customer and have to maintain service and warranty for the same..
    Could any one help me how to do this.
    Can we use COMMPR01 for this..
    Thanks in advance,
    S.Jenibalet

    You cannot ship to an Apple store in another country - they will not
    accept the shipment.
    You must either take the iPhone personally to the country where the
    warranty is valid or send it to a friend/relative in that country. After
    repair/replacement, the friend will have to send the iPhone back to you.
    All shipping and insurance costs are your responsibility.
    Buy the iPhone where you intend to use it to avoid warranty problems.
    Some features (especially 4G/LTE) might not work outside the country
    the iPhone was meant for. KSA, UAE and some other countries block
    FaceTime from the iPhone and FaceTime cannot be installed on those
    iPhones even if used outside the restricted areas.

  • I'd like to buy an iPhone 4S in France directly from the Apple Store, not from the operators. But, I will go back to my country, Thailand. So, I'm wondering to know that there is an INTERNATIONAL warranty for iPhone, and is it valid in Thailand (warranty)

    I'd like to buy an iPhone 4S in France directly from the Apple Store, not from the operators. But, I will go back to my country, Thailand. So, I'm wondering to know that there is an INTERNATIONAL warranty for iPhone, and is it valid in Thailand (warranty). Would it be able to be claimed at the iStudio in Thailand?

    There is NO International Warranty for the iPhone.  Your best bet is to purchase one in Thailand.  If you purchase a phone in France, you will NOT get warranty service on it in Thailand and will have to return it to France (or any EU country) for warranty service.

  • Extended warranty for DV6 motherboard?

    I bought a DV6 laptop for my daughter a little over a year ago, and about 2 months after the 1 yr warranty expired she started noticing a lot of heat on the bottom of her laptop.  I helped her clear out the dust in the fan area and made sure she was using a separate lap-pad with a fan.  We couldn't seem to cool it down much and then the display started having problems, and now she just gets a single flash on near the caps lock key.  Which I think means a processor or motherboard failure.  I've done a lot of checking around and have seen some mention that HP has an extended 2 yr warranty for this problem.  Does anyone know if that is true and if so?

    I just recieved a refurbished S100 and it came with a one year warranty.

  • Problem in automatic batch determination for components in process order

    hi
    Ours is a process order industry. Here we prepare food items.
    We are entering manual batch for finished product. We want to perform automatic batch determination for one of the components raw material. For other packing material we do not want to maintain batches.
    The batch procedure picked is me0001 for 261 movement type instead of C00001.
    Because of that we need to enter batch manually.
    Send us the procedure to automatic batch determination for components.
    regards
    ravi

    Ravi,
    Before posting please do search in this forum because this topic has been discussed many times in past.
    Please check below links which could be helpful to you Automatic batch determination in process order
    http://www.sapsword.com/home/sap-batch-management/sap-batch-determination
    If you still have issues then please come back.
    Br
    KK

  • Auto batch detmn for components in Process Order selects batch in Q status.

    Hi Gurus,
    We have the following issue with automatic batch determination for component batches for a Process Order:
    Say for a Process Order it requires components A,B, and C.
    The issue is with component C. if the PO requires 100 Qty of C. the system is picking batch X having 80 qty  and picking 20 from another batch Y which is still in u201CQu201D status (due to some defects it is not cleared .  for which inspection should have completed 3 days before Process Order is released).
    Also there are only these two batches for this component in MMBE.
    What I understand is system adds GR date + GR processing days ( for inspection) and release component for production after that (ie., moves to Un restricted stock). Therefore system selects this batch as per the availability check (by calculating the GR+ GR processing date) even thoe it is not cleared yet.
    Also, I want to know If this is correct procedure, how can we make system to not to include batch with Q stock (batch which is having some defects).
    Thanks,
    N.

    Hi
    Use separate Checking Group(Availability Check) in MRP-3 view for comp C with the settings in OPJJ(Availability Check+Checking rule combination) with untick incl.quality insp stock. Idea is to select the un-restricted batch stock qty during Auto Batch determination for Components
    Regards
    Brahmaji

  • CO07 and special stock indicator for components

    Hello,
    My final purpose is to be able to call components from project stock in production orders without header material, created in CO07.
    I notice a strange behavior and would be glad to recieve some explanations.
    Production orders are assigned to a WBS. If I indicate the WBS in the CO07 selection screen, the special stock indicator for the components is determined as expected:
    If view MRP 4 for the component says "Individual requirements" then special stock indicator is set to "Project stock"
    If view MRP 4 for the component says "Collective requirements" then special stock indicator is set to "Common stock"
    Second scenario is that I don't provide the WBS in the CO07 selection screen, but provide it in the assignment tab later. In this case, the special stock indicator for components will always be empty (common stock) by default, without any possibility to modify this manually.
    Is anybody able to explain me why?
    Merry Christmas to all.

    Hi!
    Actually it is not related to SAP Manufacuting Execution solution - so you'd rather re-post the question to ERP-related forum. This can help you find a proper one.
    Regards,
    Sergiy

  • Default item category for components in task list

    Hii all,
    I need one help. We need to maintain default item category for components in task list.
    Currently it comes as "L" and the field is non editable.
    Is there any way wherein i can edit the item category to "N" or any other. Also need to know why this category "L" appears?
    I can brint the default item category in the service order by the standard config.(PM/CS--> Maint & serv processing --> Main & Service orders --> General data --> define default values for component item categories)
    But i want it in the task list.
    Please help
    Regards,
    Vijay

    Hi Vijay,
    Just go to task list and then to component. go to item category field and press F1 (help)
    its mention
    Item Category (Bill of Material)
    Categorization of the items in a BOM according to set criteria, such as whether they refer to an object (for example, material master or document info record) or whether they are kept in stock.
    To my knowledge It wont be possilbe have item category N in task list by directly adding material.
    Hi Pete,
    Correct me if i am wrong that configuration setting for default material type and item category works for orders only.

  • Item category editable for components in task list

    Hi all,
    I need help to put the item category editable for components in task list.
    Currently it comes as "L" and the field is non editable. Do you have any ideas or solutions? I already tried SPRO but didn't find anything useful.
    Thanks in advance,
    MB

    Thanks Maheswaran,
    So if it isn't possible to make it editable, how can I change the category to 'N'?
    Does that configuration depend on the company? Because I want the item category to be 'N' for just some companies.
    Thanks
    MB

  • Can I get technical support (repair or replacement) under warranty for my iPhone 5 in Russia?

    Can I get technical support (repair or replacement) under warranty for my iPhone 5 in Russia?
    <Personal Information Edited by Host>

    http://support.apple.com/kb/index?page=servicefaq&geo=United_Kingdom&product=iph one
    Pick your Country from the country drop down menu for all your
    service options ( there is also a language choice )

  • How long is the warranty for the iphone? anyone know?

    how long is the warranty for the iphone? anyone know?

    Depending on where you are, the standard warranty is 1 year. See this link for infomration, and select your device and location. http://www.apple.com/legal/warranty/

  • Can i buy indian warranty for macbook air which i bought in usa

    i have the latest macbook air 13 inch which i bought from usa.. can i buy indian warranty for it??

    It is the iPhone that only has a warranty in the country it was purchased in. Everything else has an international warranty.

  • PR's are raised for components(PM2 Secondary Packing) are not in BOM

    Dear Gurus
    It was found that PR's are raised for components(PM2 Secondary Packing) are not in BOM
    after MRP run. In MRP4 view of the material (Material type  ZVER  Primary Packaging material) i found that :
    <u>SLoc MRP indicator#       </u>                 
    Reorder point 0   & Replenishment qty    0
    Can u pls explain how to solve this problem??
    Ragesh pk

    Hi Ragesh,
    Do u mean to say after the MRP run for header material, PR is created for Components which are defined in  Header material BOM, if so
    1.Please check Dep requirements created along with PR for components, this ill give pegged requirement (Source header Material).
    or
    use where used list to find out header material list inwhich , the component has included as BOM item.(CS15)
    or
    The component may be a followup material for another component.
    Please try and come back
    Regards
    pradeep
    Regards
    pradeep

Maybe you are looking for

  • VI Server - Open VI Reference is using local path, not remote

    First time posting to NI Developer Zone, so bear with me. I have a PXI-1050 chassis with a PXI-8187 controller that runs LabView RT.  I have set up this PXI system to utilize a VI server on port 3363 and opened access to my host PC which runs LabView

  • I've had my eye on this Canon scanner, but...

    I've also came across this website about scanners. Now I'm interested if anyone could give me some specs about these two scanners that I've been looking at, so that I finaly can decide. The things I set my eyes on was a Pixma MG8220 (that's also a sc

  • Function modul CRM_MKTBP_MAINTAIN_OW input

    Hello, i need to use FM CRM_MKTBP_MAINTAIN_OW. what exactly is the PROFILE_TEMPLATE_ID which is required in the input structure of this FM? Which database-table field is this? Thank you Best regards Manfred

  • Calling Java APIs from Adobe AIR Front End

    HI , I have developed an desktop application entirely in java. Currently it is console based, but i am planning to have a UI for the same in Adobe Flex. I wanted to know how do I communicate between the two, ie call methods that are defined in my jav

  • Scroll button doesn't work

    I have a connected mouse with a little ball on the top. I used to be able to turn this ball and my pages would scroll. They don't now. How can I get this back? Thank you Carl