Material, service and warranty for single product

Hai all,
I have to do a scenario like this..
I have to sold a DG set to a customer and have to maintain service and warranty for the same..
Could any one help me how to do this.
Can we use COMMPR01 for this..
Thanks in advance,
S.Jenibalet

You cannot ship to an Apple store in another country - they will not
accept the shipment.
You must either take the iPhone personally to the country where the
warranty is valid or send it to a friend/relative in that country. After
repair/replacement, the friend will have to send the iPhone back to you.
All shipping and insurance costs are your responsibility.
Buy the iPhone where you intend to use it to avoid warranty problems.
Some features (especially 4G/LTE) might not work outside the country
the iPhone was meant for. KSA, UAE and some other countries block
FaceTime from the iPhone and FaceTime cannot be installed on those
iPhones even if used outside the restricted areas.

Similar Messages

No Service and warranty support from Lenovo in the Service Center for K900... HCL Touch Jalandhar.

I recently bought this phone on 25th day of Octuber 2013. And 17 days earlier while using the phone it suddenly restarted itself then never detects any sim card. After that I checked the sim card, cleaned it with a cloth and reinserted it in the phone but the phone didn't detects it, also tried other sim cards but no sim was detected in the phone. Then I made a call in the Lenovo smartphone customer care and I told them about the problem in the phone and they gave me addresses and numbers of two service centers; first in Chandigarh and second in Jalandhar. Jalandhar was the nearest SC for me, so I visited the authorised Service center of Lenovo in Jalandhar city "Logic Computers C o HCL Care" then I gave the phone to their technician for inspection. After throughly inspecting the phone he announced that the phone's motherboard have to be replaced wih the new MB as the sim card slot is not working. Then they returned my phone and told me that the complaint for this handset is registered with them and I will be called whenever the motherboard reaches the SC. Now its already 16th day from the day I registered the complaint but I didn't received any message or call from the SC; instead I called them twice and they just have one answer that the complaint is under processing in the system and the part is not available in the company. They also told me that it might takes an month or never be repaired as the company is very irresponsible for after sale service support. Sol there's no support and warranty for the Lenovo Smartphones in India. It was my first Lenovo product and it just failed to prove that they worth the cost. If Lenovo Support really exist in India please replace or repair my phone as I had spent Rs 24000 over it. My complaint number is SRIN0701404240002; the complaint is registered by "Vaishnav Anand". Please prove yourself or I will spread all about your Bad Service Support all over the internet and registered a case against you in Consumer Court. Thanks

Solved!
Finally I've got another DVD recovery set from Lenovo. Now it works. Seems that the first DVD set was invalid .
Regards,
P.

Missing shared feature Reporting Services Sharepoint and Reporting Services Add-in for Sharepoint products

Hi, when I try to install SQL Server 2012 SP1 (ISO from Microsoft Download website) on a Windows Server 2012 and try to select the shared feature options:
- Reporting Services Sharepoint
- Reporting Services Add-in for Sharepoint products
They are both missing from the list.
How do I solve this? Help!

Hello,
Did you download the SQL Server 2012 Express with Advanced Services edition from the Microsoft website? If so, this edition did not support SharePoint Integration mode.
Just as Alberto post above, Business intelligence features are not all available in all editions of SQL Server 2012. You can refer to the following link about support features in Editions of SQL Server 2012:
Reference:http://technet.microsoft.com/library/cc645993(SQL.110).aspx#Reporting
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support

Pros and Cons for single sales organization and multiple sales organization

Hi!
Does anybody have a good data of Pros and Cons for Single Sales Organization vs. Multiple Sales Organization.
Thank you!

Hi,
Actuall it all depends on the business process.
I will explain the answer to you through a practical example
like Ford, it has sales and services all across globe.
It is not advisable to manage all of its activities under only one sales organization, say Ford Inc.
So what it does is de-centralises the whole process according to the country, region so that the whole process is divided and hence can be managed more effeciently.
Hope this helps you in understanding the basics.
One sales org always provides you with very less data to update and maintain, while many sales org makes the scenario more complex.
One sales org always gives you the flexibility to bring any changes to the current scenario, while in multiple sales org to bring a change its a tiresome job.
These are some of the advantages and disadvantages of one to many sales org.
regards,
Siddharth.

WHERE IS CREATIVE SUPPORT AND FIRMWARE FOR THEIR PRODUCTS???????

@WHERE IS CREATIVE SUPPORT AND FIRMWARE FOR THEIR PRODUCTS??I swear I can't believe Creative is getting away with what they are doing. I can't tell you the amount of people that are infuriated with this company. Creative seems to be more concerned with releasing a hundred versions of the same type of mp3 player instead of supporting the mp3 players they've already released. I have owned multiple Creative products including soundcards and mp3 players. The lastest one- the Creative X-FI(with wireless lan) is one of the glitchiest players I've ever owned yet their last firmware update was 2 years ago- 2 YEARS!!
!!! I've had it with this ridiculous company. They would be the envy of Apple if they could only get their customer support together instead they'd much rather watch their customer base slowly evaporate.
Dave

I TOTALLY agree. Not only does their product support blow, so does their customer support. I can't find anywhere to contact these people regarding my warranty return status. I have typed the RMA info in for 3 days now and all I receive is an internal error! WTF :angry:
The contact us link is just another link back the same options on the page. SO "contact us" really means "Good luck clicking around in a circle until you give up." I really hope that they send me my product back, lord knows I can't track its status anymore.
This will be the LAST thing I ever purchase from Creative until I've heared that they have gotten their act together.

This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Go to AirPort Service and Support for more information.

I am trying to update my Airport Extreme. I go into the Airport Utility and this is the message attached I get when clicking on it.
"This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Go to AirPort Service and Support for more information." That;s it.
I guess I can hard reset it, but this seems weird. Any advice would be nice.
Thank you.

Dear Bob, I have same problem:
"This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Go to AirPort Service and Support for more information."
My MBAir is running OSX 10.9.3 and the AIrPort Extreme I'm trying to use is A1143.
Thanks

Does anyone from Adobe offer feedback and support for this product?

I'm a teacher at an elementary school and run our morning news show. Currently we're using rather old hardware to run the show through closed-circuit, but are in the process of getting what we need to run a software solution instead. When I watched the video for VC3, I liked what I saw. It was a major part of why we decided to go with a software solution. It seemed to have all the right pieces for what we need to do.
However, the more I read about it on this forum and around the net, it seems that support and instruction for this product is non-existent, and that the product itself can be buggy at times. This has me quite concerned. It looks like this program is a few years old now, and I can't find any recent updates or news about it. Before I make the purchase, is this a program that Adobe even supports anymore? Is there anyone here at Adobe or elsewhere in the know that can/will provide guidance and troubleshooting if needed?
If not, does anyone here have any other products that they have experience with that might provide a better alternative? We're still looking to run this as a live show through a closed-circuit, although we could prerecord the show and stream it if necessary, but the turnaround time would need to be quick.
Any thoughts?

There is an entire community of Visual Communicator users at http://TeachMeVC.com where you can browse topics and ask questions if you become a member (free).
Nobody bothers to monitor the forums on the Adobe site for this product so we encourage you to join us at TeachMeVC.com and subscribe to stay in the loop. You will find users that span from the education, business, government and personal users of Adobe Visual Communicator.
Also consider my training DVD series and equipment recommendations that have been used by thousands of VC users over the years. There is NO competing product that gives you live greenscreen capability, teleprompter, easy workflow, wizards, and a ton of included media content. At this point in time, Adobe Visual Communicator is a unique product in it's class! The next comparable option is to spend $8,000 to $10,000 on a NewTek Tricaster that has a huge learning curve.

Security Approach and Plan for single logon for Essbase and Reports.

Please any one can suggest me, how can I do the Security Approach and Plan for single logon for Essbase and Reports by using Maxl or Administrator.If any one have code,please forward to my email Id: [email protected]

Once you are logged in to the "Hyperion Portal" as you call it, your user credentials are automatically passed among all the components. Therefore, a lot of the logic you created to pass credentials between BQY files in a desktop environment are no longer needed.

I am trying to hook up my Airport Express to my current network and AirPort Extreme but keep getting the same error message: "This version of AirPort Utility doesn't support this base station. Go to AirPort Service and Support for more information."

I am trying to hook up my Airport Express to my current network and AirPort Extreme but keep getting the same error message: "This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information." Any thoughts?

This sounds as if you have an older AirPort Express that is no longer supported by the newer Mavericks operating system.
To check and see if that might be the case, locate the model number on the side of the AirPort Express. It will start with an "A" followed by four numbers. Hard to see in the faint print.....so you may need reading glasses or a magnifying class to see the model number clearly.
Model numbers A1084 and A1088 of the AirPort Express are no longer supported by AirPort Utility in Mavericks.
You will need to use a Mac running Leopard, Snow Leopard, or a PC to be able to administer the older AirPort Express.

"RUNSTATS and REORGCHK for single table" in DB13

Hello,
Our system is ECC 6.0, SAP_BASIS is SAPKB70011.
"RUNSTATS and REORGCHK for single table" in DB13, I found the parameter, "Parallel Jobs".
Why there is this parameter? Can we execute parallel runstats for single table in SAP environment?
Thank you very much and best regards,
Takae.

Hi Takae,
Although this DB13 job is named '.. for single table' it can process more than 1 table if you use wildcards. And only in this case parallelism makes sense, because the job cannot parallelize the runstats for one table but only parallelizes the runstats execution for different tables. Technically this is done be creating further background jobs in the SAP system.
Best regards
Ralf

HT1998 How can I administer a Gen 1 Airport Express from Airport Utility 6.3.2 (OS 10.9). I can see the base station but get the message: "This version of AirPort Utility doesn't support this base station. Go to AirPort Service and Support for more inform

How can I administer a Gen1 Airport Express from, my MacPro (OS 10.9, Airport Utility 6.3.2). I can see the Express in the WiFi window but from the Airport Utility I get the following message: " This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information." Of course there's nothing of value on the support page. Any clues anyone?

Apple has dropped support in Mavericks (10.9) of the AirPort Express and AirPort Extreme models that were discontinued more than six years ago.
You can still administer the older AirPort models if you have a Mac running Leopard, Snow Leopard, or a PC.

Apple Customer Service and warranty exceptions

Hello all,
Whilst I love my Apple hardware and software, and have had many good experiences with them over the years, unfortunately I post today with a complaint about what I perceive to be poor customer service and product quality.
In late March/early April of 2006, I purchased a 1.83GHz MacBook Pro with great anticipation- Intel inside, Tiger OS, inbuilt webcam, and general awesomeness all round. I also purchased the 3 year AppleCare warranty, which was to be a godsend as during the following three years I would experience:
*The replacement of the battery under the original MacBook Pro battery exchange program
*The left fan on the unit dying in 2007
*The logic board itself dying in late Feb/Early March 2008, thus bricking my laptop
*Another battery replacement as the replacement for the original died before it (realistically) should have (Apple very nicely made an exception to the battery's 1 year technical warranty and replaced it for me).
Fair enough, it's a new unit and was bound to have some problems. Unfortunately, last week the logic board died AGAIN; a mere 18 months after it was replaced in 2008. The unit is out of AppleCare warranty by 5 months or so, but I was urged by forumites and friends to call Apple, who would surely make an exception for me and pay for the replacement part, given my service history with the laptop and Apple's reputation for excellent customer service.
Unfortunately, this has proved to not be the case. Calling customer service at Apple Australia I talked to Steven, who was firm to the point of rudeness when he stated that my laptop was out of warranty and Apple would cover nothing but the labour charges involved, as a "guesture of good will". When stretched, he offered me a $125 voucher if I wanted to purchase anything over $400 in the Apple store, and stressed he didn't have to do this but the company was attempting to provide good service to its customer.
Despite my argument that I forked out over $3000 for this laptop a mere three years ago and am now looking at over $1000 to repair something replaced only 18 months ago, his line was that Apple provided a warranty and that was simply that (apart from a month or two grace). Five months is apparently "far outside the warranty period".
I received no challenge to my assertion that after buying something which cost over $3000, it was reasonable for Apple to expect a consumer to pay an extra $1000 every year after the warranty finishes to replace a broken logic board. In truth, I find this near incomprehensible, considering one can buy the supposedly inferior build quality of a Dell, HP, Toshiba, etc and see it last not just beyond the warranty but another two or three years before it finally suffers something terminal.
While from a warranty perspective Apple are well and truly within their rights to refuse to pay for the part, at the end of the day I am left to pay $1000+ for a repair for something which may only last another 12 months, plus $3500+ for a new Macbook Pro with AppleCare if I want a replacement- minus of course the $125 they are offering.
I did some reading of the ACCC's website about my statutory rights and the Trade Practices act, and I note the following with interest:
*Statutory conditions (goods)*
The Trade Practices Act implies the following statutory conditions into consumer contracts:
* The goods must be of merchantable quality. That is, they must meet a basic level of quality and performance, taking into account their price and description. They also should be free from defects that were not obvious to you at the time of purchase.
* The goods must be fit for their purpose. That is, they should do what they are supposed to do and be suitable for any purpose that you might have made known to the supplier.
* The goods must match the description you were given or the sample you chose from. For example, any carpet laid must be the same quality and colour as the sample you chose from.
* You must receive clear title to the goods, including goods bought at auction. In other words, you can expect to own the goods outright and any restriction on ownership should be explained to you beforehand.
While I don't particularly want to make a big deal of things, I hardly see $3000+ for three years use and $1000 each year thereafter to be merchantible quality or fit-for-purpose! This is supposed to be a high end laptop with excellent build quality, and yet I've a secondhand iBook that has been chugging for longer without issue than this machine!
I told Steven from Customer Service that his offer didn't satisfy me in the slightest, and still put me in an awkward position with regards to repair and repurchase. He simply wouldn't budge, and refused to see things from my point of view (which another operator, Anu, was able to do and thus produce a much better response from myself). I have since asked to speak to his manager which- after initial resistance- I have been able to secure a future callback from. I have no idea how well discussions with he/she will go.
What I'd like to hear from you guys and girls is your experience with similar situations, and whether you think I've a leg to stand on with regards my replacement request or the ACCC stuff above. Again, I love my Apple products but I hardly think asking them to replace the part while I pay for labour is a big ask, given the service history and my desire to continue buying and using their products.
Love to hear your points of view on this one; thanks for taking the time to read it!
Cheers,
Dave.

Dear meacod
I have live the same, except that I Cure my MBP before it goes to die.
A lot of older participants here just talk about Aplle care, which seem the automatic thing in front of a lack of real good quality on Apple products .
But I think we pay the price, and my second hand MBP was much more expensive than a brand new PC with more ram, more Hard disk, and even a blue ray...
I don't know your mbp history, but that's sure that we are not equal, in world, with Apple customer support. France is not so great, I don't know for your country.
The only thing I think is that Apple should take care of us, as we have some unacceptable issues, for An Apple Product...
Since 1996, when Apple was almost dead, saved by Bill Gates investment !!! , I have every year promote it, and it was not easy, but I have bring to Apple between 3 to 10 customers each year..
since One year, I have stop that, because I don't believe anymore in Apple product's superiority .
Oh, yes, on the paper, it's better, the system is really good. But the overall experiment can be so bad that I don't want to loose friends, or customers...
I don't say it's always bad : I just say that it CAN BE SO BAD and that Apple DON'T take care of that...
so, for your computer, open it, check it a lot, may be it's too late, but for instance, you talked about a fan, I have solved that case just by putting oil on the fan's axe...
good luck

SOS only, No Service and searching for network

Need help!! Very little beer spilled on my iPhone 4 where the speaker and front camera is and was wiped try immediately. It was still working fine after the incident for a few days however, suddenly the iPhone started playing up and losing reception and now its started showing SOS only then it says No Service and switches back and forth from No Service to searching.
I've tried...
Turing on/off airplane mode
Taking SIM out then putting it back in
Putting another SIM in iPhone both Telstra SIM and Optus
Putting iphone in container of rice for hours
Restore network settings
Hard reset iphone (holding sleep/home key)
Updating iTunes version
Sync -> back up iPhone -> restore iphone -> sync and back up iPhone from previous back up's -> restore back up again just to be on the safe side but there's no change and keeps switching from No Service to searching.
Telstra is not sure whats wrong and has advised to take it to Apple or Telstra store for assessment and sent of to get fixed.
Does anyone know why this is happening or what I can do to fix it without having to fork out money if possible as not covered by warranty anymore.

Disregard this post, I have resolved my issue, thank you

Discount Code for Single Product

Is it possible to create a discount code for just a single product? I know I can do it for a single catalog - but hoping I can do it on single products, too.

I've had to display two BC catalogs on one page whenever clients request this, which seems to be a common request. Often clients want one page displaying two different catalogs side by side.
You can accomplish this with jQuery.
Set up an empty div on the page that will hold the catalogs...
<div id="the-catalog-1"></div>
<div id="the-catalog-2"></div>
Then include a script so jQuery will use Ajax to load in the normal BC catalog page from the BC server and insert it into the div on your page...
<script type="text/javascript">
$('#the-catalog-1').load('/promotional-items div.shop-main').slideDown();
$('#the-catalog-2').load('/promotional-items/t-shirts div.shop-main').slideDown();
</script>
In this example I'm pulling a parent catalog named /promotional-items and reading only the content from that BC page that is within its div having class="shop-main"
jQuery will let you load only part of the content from the BC catalog page, in this case, I only wish to load the catalogs and/or products displayed within the div class="shop-main" in order to avoid loading the entire catalog page which of course would include the page template which I don't want. I only want the part of the page in which BC is using the BC catalog layout or small product layout to list catalogs/products, eliminating the normal page template it displays within. For docs see "Loading Page Fragments" on the jQuery documentation page for the load command here: http://api.jquery.com/load/
In #the-catalog-2 in the example I am loading the products displayed within the t-shirts subcatalog off the promotional-items catalog.
You would likely need to set some CSS to set the width and perhaps height of #the-catalog-1 etc. although in my example I have no height so nothing is displayed until the catalog page loads and then I'm using a jQuery slideDown() to slide the div open and down with the content in it.
Of course in order to run jQuery code you site needs to load jQuery in your page template etc. If you don't know how to do that there are instructions on my site:
http://www.atlantawebdesignga.com/_blog/Adobe_Business_Catalyst_Developer/post/Loading_jQu ery_-_Loading_Latest_jQuery_-_Test_If_jQuery_Loaded/

Three same material document number generated for single PO line item.

Hi,
I found three same material number has been generated for single PO line item. Is there any specific reason for this.
Here is the detail.
PO
LN   qty
10    100
PO history for LN 10
Mat doc          qty               price
5000000000     100               100
5000000000     100               100
5000000000     100               100

see aditya , tables having document number as a primairy key will have a single entry , where as tables having primary key other then material documnet number is having multiple entries . as far as material document is concern , it is only one document in system , now we have to find why it is appearing 3 times . i will test this in my system and let you know .
well thanx for your Cooperation . i will definatly get back to you .
regards
ravikant dewangan

Material, service and warranty for single product

Similar Messages

Maybe you are looking for