Warranty on the issue of purple spot in images taken from rear camera?

My iPhone 5 have purple spot in images taken from rear camera. I just noticed the issue in my phone today.
I researched online and some people also have the same issue and have their phone replaced in Apple shops.
I don't have any receipt or store warranty card since it was just given to me as a gift in the Philippines last April 2013, I checked the warranty coverage status (https://selfsolve.apple.com/agreementWarrantyDynamic.do) and it still has repair and service coverage.
Im now here in Dubai, and my question is that will Apple Premium Reseller shops here in Dubai honor the said warranty and have my iPhone repaired or replaced?

Im now here in Dubai, and my question is that will Apple Premium Reseller shops here in Dubai honor the said warranty and have my iPhone repaired or replaced?
No.
The warranty for an iPhone purchased from an official source in the Philippines will be honored in the Philippines only.

Similar Messages

  • I would like to create a pop-up window appear from Labview Interface. In this window, I will have a slide control and an image taken from a camera. The main VI have to run while pop-up window is open. How can I do ?

    When I pushed a button, this pop-up window has to appear. There will be a slide control and a picture from a camera in this window. Is it possible to make appear this windows while main VI Interface continue to run ? How can I do this ? Thank you for your answers.
    Cyril.

    Here you go. This is simple example. Maybe not the best way, I am just
    beginner in LV and still not comfortable with data flow that much. I prefer
    events, so I would change this to use Event Structures.
    When you click on OK button on SliderMain, it opens Slider.vi. Now both
    windows are open and you can interact with both. Now if you click on OK
    again with Slider.vi open, you run into problems. Only thing I did was
    change VI properties of slider.vi, mainly window appearance.
    vishi
    "Cy" wrote in message
    news:[email protected]..
    > I would like to create a pop-up window appear from Labview Interface.
    > In this window, I will have a slide control and an image taken from a
    > camera. The main VI hav
    e to run while pop-up window is open. How can I
    > do ?
    >
    > When I pushed a button, this pop-up window has to appear. There will
    > be a slide control and a picture from a camera in this window. Is it
    > possible to make appear this windows while main VI Interface continue
    > to run ? How can I do this ? Thank you for your answers.
    > Cyril.
    [Attachment SliderMain.vi, see below]
    [Attachment Slider.vi, see below]
    Attachments:
    SliderMain.vi ‏16 KB
    Slider.vi ‏11 KB

  • I am facing a problem while working in Muse... The issue is I cannot delete a page from my plan, when I am trying to delete it showing an error and the application shuts down. I am working on an emergency project which I got to submit it tomorrow I hope y

    I am facing a problem while working in Muse... The issue is I cannot delete a page from my plan, when I am trying to delete it showing an error and the application shuts down. I am working on an emergency project which I got to submit it tomorrow I hope you will find a solution for the same.Help with using Adobe Muse CC

    Thanks,
    I have tried with a new site it's working perfectly.
    See the screenshot of the error.
    Thanks for your support Rohit

  • I have a friend that has the IPhone and I have Straight Talk, what the issue is,when I send picture texts from my ST phone to his IPhone,he always tells me  he doesn't receive them.Why is this happening?

    I have a friend that has the IPhone and I have Straight Talk, what the issue is,when I send picture texts from my ST phone to his IPhone,he always tells me  he doesn't receive them.Why is this happening?

    You got the new iphone?????   I have same problem.  I transferred audiobooks to device to find no audiobooks on device (despite it being in iTunes as if it was).  Have you found a solution?????   I even tried to change import settings on format transfer but hasn't worked. 

  • Hello, I am trying to use a photo,that I've opened up in pages on a blank landscape, taken from my camera roll and use it as album cover art. All the custom text's will not paste when I copy.  Pic and texts are saved as a PDF, how can I paste the doc ?

    Hello, I am trying to use a photo,that I've opened up in pages on a blank landscape, taken from my camera roll and use it as album cover art. All the custom text's will not paste when I copy.  Pic and texts are saved as a PDF, how can I paste the doc ?

    Hello, I am trying to use a photo,that I've opened up in pages on a blank landscape, taken from my camera roll and use it as album cover art. All the custom text's will not paste when I copy.  Pic and texts are saved as a PDF, how can I paste the doc ?

  • How can I get my new ipad 4 to read my compact flash cards? If not can I download the images directly from my camera?

    how can I get my new ipad 4 to read my compact flash cards? If not, can I download the images directly from my camera?

    Tom, thanks for your quick reply. I'm a commerical photographer using Canon 5D mk2's mostly and have in the past just downloaded images to a mac book for backup. I really liked the compact size of the Ipad and just got the retina model with the camera connection kit and seem to be hearing that CF readers can't be used with it b/c they draw too much power. Seems like I remember reading I could use a cord that might have come with my cameras to download directly to the Ipad. I haven't tried it yet as I can't find the connection but then you just said it can't be done? 
       I'm COMPLETLY lost as to your "first pluging in a flash drive to my computer, advice. Do you mean Ipad when you say computer?  "then put your movie/photo files into the folder." HOW????????
         Then plug it into the Ipad??????     TOTALLY lost.
    Also your saying just "do a google search for a reader doesn't work b/c NONE are able to work with the newer Ipads b/c they use TOO much power or so everyone says everyone that have tried.
       Hope you can help a little more b/c I'm really getting frustrated with all the conflicting advice!
    Thanks, Dennis  [email protected]

  • A7000 | The images taken from the front facing camera(FFS) (5MP) are mirrored. Is this an issue?

    Hello Team,
    I just took an image from the FFS off my new A7000 and i noticed that the images are mirrored. Is this a software issue?
    I even owned a A6000 but the images from that were proper.
    As far as i know mirrored image should be displayed while taking the picture but  proper un-mirrored image should be saved. 
    Please look into this issue.
    Here is an image(re-sized) i took from FFS which is reversed/mirrored.
    Admin note; picture >100K converted to link.  About posting pictures in the forums.

    Yes i have updated to the latest firmware S141. And yes i am using the default camera app but still the issue exists. Is this a software issue or is it a hardware issue? If its a software issue, then is it possible to fix through future firmware updates? Anyhow i'll take the phone to nearest service center. Can you give me the address for service center in Bangalore(India). Thank you for the reply.   

  • I upgraded to the mew iMovie (purple star) vers 10.6 from the old I movie (yellow star) in the old one when i was done with my project i could finalize it and share it to idvd to burn a dvd, i don't see how to do that in the new iMovie.  is there a w

    i upgraded from the old imoive(yellow star) to the new iMovie(purple star) , in the old iMovie when i was done i was able to share my project to idvd, i don't see how to do this on the new iMovie. Does anyone know how to burn a dvd with your project from the new iMovie(purple star)?  if can't be done can i export my project to the old iMovie and burn to idvd like i used to?

    i did what you said and saved the file to my desktop, but how do i get it in idvd now, when i open idvd and point to the file on the desktop either by open existing project or trying to open a new project the file is greyed out and i can't select it

  • Dark spot on screen when using rear camera and phone shutting down randomly at 20% power

    I probably already know the answer to my question but my nearest apple store is 2hrs drive away so just want to know has anyone experienced the same issues and if so what was their resolution?
    I noticed last week when i went to use the camera that the phone randomly shut off even though I had near 20% batter power, it then would not switch on again without me plugging it in to charge. I am always careful with charging and discharging the battery, ive done resets and a restore but the issue is still there snd today i noticed the dark spot on the screen and subsequently on the photo when using the rear camera - its definitely not there when using the front facing camera.
    If i go to the apple store will they swap it out (still plenty of warranty)? I cant do it by post as I need my phone at all times and dont have a cc to do the express service return!!!
    Thanks in advance

    I've had this same problem. I called apple about it and they said that it seems to be a current problem with a lot of peoples phone. The only question that I have, if anyone can answer, is that Apple is supposed to send me a new phone to replace mine but I am wondering if it will be the 3G or the old model, which is what I already have. If anyone knows then let me know, but Chennie, just call apple and they will help you out.

  • I have problems with uploading images to my printing company have the images have been manipulated through CS6 i have saved images as jpeg but the printer company tell me they are not j peg, they will not upload images save from a camera are fine

    I have problems with uploading images to my internet printing company when  the images have been manipulated through CS6 and  i have saved images as jpeg  the printer company tell me they are not j peg,
    but images saved from my phone or camera images that have not been manipulated upload fine, What am i doing wrong?

    Save/Export them as JPG. Photoshop defaults to PSD, so make sure you select JPG and not just rename the file to .jpg.
    There are two ways to save them as JPG: Regular Save as option or Save for Web & Devices
    Take your pick.

  • Problem regarding the transmission of video Through TCP/IP acquired from USB camera

    I want to transmit video using TCP/IP protocol acquired from USB camera. Acquisition is done well but when I place the TCP VIs in the acquisition VI then the trouble begins and I can’t even get the video in that particular VI which was acquiring video and working fine previously.
    Interesting thing is that both Cam Server and Cam Client VIs was transmitting video in the very first run. After that I don’t know what happened.
    I am using lab view 8.2.1.VIs are attached.
     Please help me out.
    Regard,
    Aftab
    Attachments:
    Cam client.vi ‏49 KB
    Cam Server.vi ‏67 KB
    camera.zip ‏66 KB

    Hi Shoaib,
    Here's an example I was testing mixing IMAQdx and the Simple TCP/IP Messaging Protocol (http://zone.ni.com/devzone/cda/tut/p/id/4095) to send up a video client/server app with a USB camera that I was testing with.
    Attachments:
    video client.vi ‏41 KB
    video server.vi ‏22 KB

  • Xperia z2 black spot on my pictures and videos from rear camera

    Hello everyone.
    I buyed my phone a month aago, I had take very good care of it, no drops or anything.
    Everything was fine whit my phone untill  I found a little spect on my pictures and videos... is making me crazy beacuse I didn't notice this lillte black spot on my pictures untill last nigth...
    Iv' benn googling and I found that many people is having this issue, I tryed to reset the phone but the little black spot is still there...
    I really like my phone... and I dont mind the little spec on the pictures but is awfull in video mode, specially in 4k you can see the black dot dancing around like a fly.
    Is any solution to this... should I take it back?

    You must contact your local Xperia Care as this is a hardware issue
    http://www.sonymobile.com/global-en/support/contact-us/
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Spots on photos taken with iphone camera

    Spots show up when using camera, same position. Lens is clean.
    When zooming, it grows and stay in the same location.
    Only in the backside camera. Shows up both in photo and video, regardless of the photo app being used.
    ¿What could be the cause/fix?

    Who cares the cause?  Take it to the Genius Bar for a replacement, after backing it up, of course.

  • What do I use for organizing and editing photos on the IPAD especially if I am importing directly from a camera?, What do I use for organizing and editing photos on the IPAD especially if I am importing directly from a camera?

    What do you use for organizing and editing photos that you have imported from a SD card or camera? 

    Go to the iTunes App Store in the iTunes app on your computer. Type photo into the search window in the upper right corner and you will bring up all sorts of photo apps, free and paid, for enhancing, modifying, arranging, printing and sharing photos on an iPad.

  • What are the Issues in Migration from oracle 8i to oracle 10g

    Hi,
    Can you let me know what are the issues that i face when i migrate from oracle 8i to oracle 10g. I will be very thankful if you give me a list of issues that you face while migrating from 8i to 10g

    In addition to Max's reply, you must be aware that you have to test your applications agains 10g database before you actually upgrade the database.
    If you use CBO, it may produce different execution plans for one query when you run it in 8i and 10g. This may affect your application performances, which you don't like to happen.
    Also you have to decide how much downtime you can afford during the migration. Can you afford some downtime and how much? If you can't than this makes the situation more complicated.
    How big is your database? You may end up only with simple export/import solution using export import utility.
    The bottom line is, whatever you decide, you must test your applications running against 10g database before you actually upgrade your database.

Maybe you are looking for

  • HT4623 My Ipod will not sync my Itunes Library! Please help

    I am not being able to sync my Ipod touch on my Itunes library. I was able to get all the apps, but no music. Also, some of the sogs I purchased as showing an error message saying it's not autorized to play, but I did purchase on my computer.. Any he

  • BI-IP:Derived characteristic overwritten again within copy planningfunctio

    I have an issue using planning function "copy". I am using this planning function to copy my planned data within the real time infocube chaning the plan version from 1 to 2 within my realtime infocube. In my realtime infocube, i have a characteristic

  • Increase size of text etc on MB Pro?

    So, I have my MB Pro Retina (running Windows 8) connected to an external monitor and I use both screen, the MB one and the external one. Everything on the MB is ridiculously small because the resolution is so ******* high, whereas the resolution of m

  • Push NOT working! please help

    I have a locked iphone 3GS with os3.1. yesterday i installed Ping! and it didn't work. i uninstalled it and installed it for about 4 times and still it didnt work. I restored my iphone and it didnt work also. I then read the faq of Ping! and they sai

  • What to do when Safari WONT open

    on Friday night i bought a new copy of OS10.5 Leopard at the apple store i installed it Now when i click on Safari on the dock........It wont open i get an error message that Safari had to close unexpectedly whats wrong and how do i fix it?