WAS 6.4.0 - Capability to provide JMS Queue Managers

SAP is rolling out the next major version for WAS, 6.4.0. Would that provide JMS implementation for exposing Queue Managers to external applications?
Thanks.

Welcome to SDN Arun!
           I will try to give some help.
1)
a)     I think this is in internal classes, you can ignore this.
b)     Window.destroyInstance();
c)     You need to use getResource() of IWDResource instead of getFileName() of IWDModifiableBinaryType.
d)     I think you can ignore this too
2) The data must be transferred(same) if we use context mapping for all views and controllers. But if you use DC-Dc communication then the data whichever you want to transfer that must be available in the Interface controller of the used DC.
3) No need to change LinkToAction event
Check this   [wiki|https://www.sdn.sap.com/irj/scn/wiki?path=/display/wdjava/deprecatedMethodsinNWDS7.0andabove] if it is useful to you.
Regards,
Siva
Edited by: Siva Rama Krushna on Jan 22, 2009 8:13 AM

Similar Messages

Connect from Weblogic JMS queue to SAP WAS JMS queue

Hi,
I am trying to setup a WLS 8.1 messaging bridge between a weblogic JMS queue and a SAP WAS JMS queue. I have configured a queue on both Weblogic and SAP WAS and I have set up the messaging bridge and bridge destintations in weblogic. However when weblogic tries to get the SAP initial context factory it fails with the error below.
I have added the SAP Client jars to the weblogic system classpath, and in the weblogic startup script but it still fails. Has anyone connected from an external JMS queue to a SAP WAS JMS queue that could provide me with some guidence?
<10/08/2006 08:23:45 AM WST> <Warning> <Connector> <BEA-190032> << Weblogic Mess
aging Bridge Adapter (XA)_eis/jms/WLSConnectionFactoryJNDIXA > ResourceAllocatio
nException of javax.resource.ResourceException: ConnectionFactory: failed to get
initial context (InitialContextFactory =com.sap.engine.services.jndi.InitialCon
textFactoryImpl, url = ux0800:55304, user name = username) on createManagedConnectio
n.>
Thanks
Warren

Stoyan,
Thanks for that.
My problem ended up being a classpath problem. I referenced the directory of the SAP jars in the weblogic start up script. When I changed this to reference each jar individually it worked.
I have a new issue now which may have something to do with security. The trace suggests it is logging on as the guest user, even though I entered my username and password in the Messaging bridge.
#1.5#000E7FED310600A30000008A0000302D00041AA399E338B4#1155189870559#com.sap.jms##com.sap.jms.server.sessioncontainer.InboundBus instance=BWIP#J2EE_GUEST#0####165536f0283611db8903000e7fed3106#SAPEngine_Application_Thread[impl:3]_126##0#0#Error##Plain###com.sap.jms.server.exception.JMSServerInvalidDestinationException: No destination with ID=0 found.
 at com.sap.jms.server.service.impl.RegistryServiceImpl.getDestinationContext(RegistryServiceImpl.java:404)
 at com.sap.jms.server.sessioncontainer.InboundBus.getDestinationContext(InboundBus.java:98)
 at com.sap.jms.server.sessioncontainer.InboundBus.process(InboundBus.java:153)
 at com.sap.jms.server.sessioncontainer.InboundBus.enqueue(InboundBus.java:116)
 at com.sap.jms.server.sessioncontainer.SessionContainer.receiveFromDispatcher(SessionContainer.java:63)
 at com.sap.jms.server.routingcontainer.RoutingContainer.receiveFromDispatcher(RoutingContainer.java:447)
 at com.sap.jms.server.JMSServerContainer.dispatchRequest(JMSServerContainer.java:635)
 at com.sap.jms.server.JMSServerFrame.request(JMSServerFrame.java:536)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Warren

Why use IBM MQSeries when Weblogic already provides JMS?

i kind of understand that MQSeries works the same as JMS provided by WebLogic, so there is not much a point to use MQSeries, but why do companies still use MQSeries when JMS is already provided by WebLogic?
what are the advantages of using MQSeries over WebLogic provided JMS?

I don't think there's necessarily much reason to adopt MQ, unless perhaps you have very specific messaging extensions or capability requirements. There are performance, manageability, and scalability benefits in using WebLogic JMS, especially when it is integrated with WebLogic applications. There also happen to be benefits in using the Oracle DB's built in messaging (AQ JMS).
There are tens of thousands (if not 100s of thousands) of production WL JMS deployments out in the wild - some of which are "mission critical" and quite large, and some of which have been running for 10+ years. It's not unlikely that you generate multiple WL JMS transactions per day, just going about your daily life (phone, bank, credit card, financials, etc.).
Of course your mileage may vary - and keep in mind that you're posting to WebLogic JMS forum. :-)
Tom Barnes
Oracle WebLogic Messaging Team

The server was unable to load the SSL provider library needed to log in

Hello All,
When I am trying to login to my default SQL 2008R2 SP2 instance in windows 2003 server via ssms, I am getting the below error
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (.Net SqlClient Data Provider)
When I looked into the error log and i could see lot of these messages.
The server was unable to load the SSL provider library needed to log in; the connection has been closed. SSL is used to encrypt either the login sequence or all communications, depending on how the administrator has configured the server. See Books
Online for information on this error message: 14 Not enough storage is available to complete this operation.
Force protocol encryption is set to off.
I am not sure what is the underlying problem. server's total RAM is 4 Gb and max_server_memory is set to 2 GB. CPU utilization is very normal at the time of issue.
I restarted the SQL service and i am able to connect to the instance, but the issue is repeating and i need to find a permanent fix.
Thanks

I could also see the below in error log some time before i get the above alert
Error: 701, Severity: 17, State: 123.
There is insufficient system memory in resource pool 'internal' to run this query
then after sometime flurry of alerts
The server was unable to load the SSL provider library
needed to log in; the connection has been closed. SSL is used to encrypt either the login sequence or all communications, depending on how the administrator has configured the server. See Books Online for information on this error message: 14 Not enough storage
is available to complete this operation.
Thanks

Using JNDI Provider for Oracle JMS Queue

Hello,
I created a JMS Queue in Oracle 9.2.0.1 and would like
a Java client to receive events from the Queue. I am
not running Oracle9iAS. I have access to WebLogic server
7.0 which is also a JNDI provider. Is there a sample code
that shows the steps on how to go about this.
thanks very much for any pointers.

To define an Enterprise Message Source for AS JMS and OJMS in BAM, see Chapter 3 in the BAM Architect's User Guide.
Specifying Settings for Oracle (AS JMS and OJMS)
Settings for Oracle (AS JMS and OJMS) include:
■ Initial Context Factory.
For 10.1.3: oracle.j2ee.rmi.RMIInitialContextFactory
For 10.1.2: com.evermind.server.rmi.RMIInitialContextFactory
■ JNDI Service Provider URL. For standalone use oc4j: ormi://machine_name/
where machine_name is the OC4J installed host, and for production use Application Server: opmn:ormi://<machine_name>:<opmn request port>:home where machine_name is the application server installed host, opmn request port could be found from looking at opmn.xml in <App server install location>/opmn/conf
■ TopicConnectionFactory Name.
java:comp/resource/BAMTTT/TopicConnectionFactories/bam_ttq_tab
■ Topic Name. java:comp/resource/BAMTTT/Topics/bam_ttq
■ JMS Message Type. TextMessage.
■ Durable Subscriber Name. BAMFilteredSubscription
■ Message Selector. Message selector, for example, BAMFilter='true'
■ Client ID. ClientID
You can also refer to:
http://www.oracle.com/technology/products/integration/bam/10.1.3/TechNotes/TechNote_BAM_AQ_Configuration.pdf
Regards, Stephen

HT204088 hello there, this is really urgent i would like to ask if there is a way to deactivate/lock my Mini Ipad because it was stolen, i hope you can provide me a way to do so, thank you for the support and i really hop you can help me, i bought this mi

hello there, this is really urgent i would like to ask if there is a way to deactivate/lock my Mini Ipad because it was stolen, i hope you can provide me a way to do so, thank you for the support and i really hop you can help me, i bought this mini ipad not too long ago.

Unless you enabled Find My iPad on it before it was stolen then there isn't any way to locate it. If you did enable it then you could try locating and/or remotely wiping it either via http://icloud.com on a computer or Find My iPhone on another device - but that will only work if it's connected to a network and the device hasn't already been wiped and/or Find My iPad disabled on it.
If you haven't already done so then you should report it to the police. You should also change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc., and if it was a cellular model you should also contact your carrier.

An error was encountered by the CAS Security Provider: Error Code: SVR_ER

Hi Everybody,
when i open dimension library that time i get a error
An error was encountered by the CAS Security Provider:
Error Code: SVR_ERR_SESSION_MGR_CAS_SECURITY_ERROR
How i can resolve i donot know ,pleas any body know help me.
Regards,
Ashis

I ran into the same problem. It appears to be an "undocumented feature"; however, there is a patch that is supposed to resolve the issue. The link to the patch is here:
https://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=9921096
See the following for more details:
Workspace: An error was encountered by the CAS Security Provider: Not SpecifiedError Code: SVR_ERR_SESSION_MGR_CAS_SECURITY_ERROR [ID 1265746.1]
Modified 22-NOV-2010 Type PROBLEM Status PUBLISHED
In this Document
Symptoms
Cause
Solution
References
Applies to:
Hyperion Planning - Version: 11.1.2.0.00 and later [Release: 11.1 and later ]
Information in this document applies to any platform.
Symptoms
When trying to access BPMA via the Workspace, Active Directory users get the following error:An error was encountered by the CAS Security Provider: Not SpecifiedError Code: SVR_ERR_SESSION_MGR_CAS_SECURITY_ERROR.
Cause
This behaviour is described in unpublished bug 9921096
When MSAD is configured as an external directory there is an option to enable or disable support for external groups. If Support Groups is disabled this triggers a code bug which leads to the observed behaviour on navigating to the Dimension Library.
Solution
As a workaround you can enable Support Groups.
If you want to be able to disable Support Groups you must apply patch 9921096.
References
Related
Products
•Middleware > Enterprise Performance Management > Planning > Hyperion Planning
Hope this resolves your problem!
Jennifer

HT1366 I thought my product was already registered with your service. My laptop was stolen, how else may I provide my serial number if I do not have my computer any longer.

I thought my product was already registered with your service. My laptop was stolen, how else may I provide my serial number if I do not have my computer any longer.

If you registered it in https://supportprofile.apple.com/ you can log in there with your Apple ID and find its serial number.

On switching on today my emils did not work and I was advised to contact my service provider

On starting up today my incoming emails were not displayed and I was advised to contact my service provider.After some time I clicked on the get mail tag and it worked and I have now received my emails.
Comments?

Follow this feed, I'm keeping it updated with what we know.
https://discussions.apple.com/message/19592911#19592911

How to read the messages in the JMS Queue using JMX

Hi,
          I want to read messages in the JMS queue using JMX. I was able to read using QueueBrowser but want to modify priority of the messages using JMX.
          I tried to use JMSDestinationRuntimeMBean but it does not allow us to read messages unless we pass the message Id. Is there any way that I can get all the messages in the queue.
          I am using Weblogic 8.1 SP4
          Can someone please help me in this regard.
          Thanks,
          Kiran.
          Edited by KGudipati at 10/22/2007 1:22 AM

Hi,
As far as i know, JMS Object Messages is not supported by XI JMS adapter.
you need to have the JMS provider to transform the message to bytes messages.
(Refer to SAP note 856346)

Multiple Messages in Same JMS queue

Hello,
I have interfaces in which different xml messages from the same sender system will be placed in the same MQ queue, is there a way that XI JMS sender channel can differentiate the xml messages based on the payload?
I can create a single communication channel, but the outbound message interface I cannot create a common structure because the xml messages are huge and there will be future interfaces following the same architecture.
1. How can I route in interface determination based on the context in the inbound msg interface?
2. What can I provide as Message interface for the outbound?
3. MessageSelector attribute in Adapter specific properties - any ideas on this? - I can select this in the condition context in interface determination - can I give any values here to differentiate msges?
4. Value mapping - is it possible to define the sender message interface through this?
Any idea is appreciated..THank you..

Hi Thanujja,
We have recently completed a project that had this requirement too. We made use of the MessageSelector to solve this problem. You'll need to make use of some advanced (advanced tab)settings in the comm channel. Basically you want to add Additional JMS Message Properties. You can add up to 10 additonal JMS Properties.
Let's say you've added a property called MESTYP. You then need to get the sender to populate the MESTYP property with a text value for each IDoc involved e.g. DELVRY. You would then set your JMS Message Selector field as follows: MESTYP='DELVRY'.
You'll have a comm channel for each IDoc. These comm channels will then connect to the JMS Queue & only pick up messages that meet the criteria at set in the Message Selector.
There was one other problem that encountered with Message Selector, we were on XI version 7.0, the Message Selector was working intermittently & then we applied SAP Note 1256636 & upgraded to 7.01. Everything is working fine after that.
Trevor

ODI 11g : JMS Queue XML Data Server creation

Hi Everybody,
I am facing a problem while i am trying to create a JMS Queue XML data server in ODI 11g. I have
the following details of the queue.
QueueManager=xxx;
TransportType=1;
HostName=ab.cde.fe.com;Port=77777;
Channel=CLIENT.TO.xxx1
destination name : SU.BH.RAJY.OTI.UPDATE_ITEM_RESPONSE.01
user : xyz
password : 123
I have sussefully created an jms datasouce in weblogic name 'eis/jms/abc' and also I have successfully
retrived the xml message from queue in BPEL
(using a jms adapter where
JMS Provider : Third Party,
Jms Provider Jndi Name -eis/jms/abc,
Operation name : consume_message,
destinamtion name is queue:///SU.BH.RAJY.OTI.UPDATE_ITEM_RESPONSE.01?targetClient=1).
But the new reqirement is to retive the xml data in ODI using "JMS Queue XML data server".I have tried
several ways(reading from internet) but failed to configure physical dataserver and reverse the xml message.
Also failed to understand properly the oracle post (http://docs.oracle.com/cd/E21764_01/integrate.1111/e12644/jms_xml.htm#CHDFCFBI).
Speically this portion "JNDI URL: <JMS_RESOURCE>?d=<DTD_FILE>&s=<SCHEMA>&JMS_DESTINATION=<JMS_DESTINATION_NAME>.".
What will be the "JMS_RESOURCE" in my case.
How can I configure JMS Queue XML?
Please help!
Note : I don't have the XML message structure of the Queue(also DTD file). So , I have to reverse it.
Thanks & Regards,
Subhra
Message was edited by: SubhrajyotiKundu

Hi Everybody,
I am facing a problem while i am trying to create a JMS Queue XML data server in ODI 11g. I have
the following details of the queue.
QueueManager=xxx;
TransportType=1;
HostName=ab.cde.fe.com;Port=77777;
Channel=CLIENT.TO.xxx1
destination name : SU.BH.RAJY.OTI.UPDATE_ITEM_RESPONSE.01
user : xyz
password : 123
I have sussefully created an jms datasouce in weblogic name 'eis/jms/abc' and also I have successfully
retrived the xml message from queue in BPEL
(using a jms adapter where
JMS Provider : Third Party,
Jms Provider Jndi Name -eis/jms/abc,
Operation name : consume_message,
destinamtion name is queue:///SU.BH.RAJY.OTI.UPDATE_ITEM_RESPONSE.01?targetClient=1).
But the new reqirement is to retive the xml data in ODI using "JMS Queue XML data server".I have tried
several ways(reading from internet) but failed to configure physical dataserver and reverse the xml message.
Also failed to understand properly the oracle post (http://docs.oracle.com/cd/E21764_01/integrate.1111/e12644/jms_xml.htm#CHDFCFBI).
Speically this portion "JNDI URL: <JMS_RESOURCE>?d=<DTD_FILE>&s=<SCHEMA>&JMS_DESTINATION=<JMS_DESTINATION_NAME>.".
What will be the "JMS_RESOURCE" in my case.
How can I configure JMS Queue XML?
Please help!
Note : I don't have the XML message structure of the Queue(also DTD file). So , I have to reverse it.
Thanks & Regards,
Subhra
Message was edited by: SubhrajyotiKundu

MDBs in 9.1 continue to consume JMS queues even after being deleted

We have an MDB application that reads a batch message off of a JMS queue, archives it in a database, parses the batch message into individual messages and writes them onto other JMS queues to be consumed by another application. Everything was running fine in Weblogic 8.1.5. However, due to problems with XA drivers and the MSDTC(predictable SQL server crashes), we decided to upgrade to Weblogic 9.1 to take advantage of the LLR option.
 First, we had an issue where our MDBs were causing the following exception:
 ####<May 26, 2006 7:42:12 PM EDT> <Error> <JMX> <ist-clft2> <wltest1> <ExecuteThread: '1' for queue: 'default'> <<WLS Kernel>> <> <> <1148686932991> <BEA-149500> <An exception occurred while registering the MBean null.
 java.lang.IllegalArgumentException: Registered more than one instance with the same objectName : com.bea:ServerRuntime=wltest1,MessageDrivenEJBRuntime=RhapsodyMDB_DMBModule!JMSServer4@DMB_BEAN_QUEUE,Name=RhapsodyMDB_DMBModule!JMSServer4@DMB_BEAN_QUEUE,ApplicationRuntime=DataBrokerEAR1_2,Type=EJBPoolRuntime,EJBComponentRuntime=DataBrokerEJB new:[email protected] existing weblogic.ejb.container.monitoring.EJBPoolRuntimeMBeanImpl@7db003
 at weblogic.management.jmx.ObjectNameManagerBase.registerObject(ObjectNameManagerBase.java:146)
 at weblogic.management.mbeanservers.internal.WLSObjectNameManager.lookupObjectName(WLSObjectNameManager.java:133)
 at weblogic.management.jmx.modelmbean.WLSModelMBeanFactory.registerWLSModelMBean(WLSModelMBeanFactory.java:86)
 at weblogic.management.mbeanservers.internal.RuntimeMBeanAgent$1.registered(RuntimeMBeanAgent.java:104)
 at weblogic.management.provider.internal.RegistrationManagerImpl.invokeRegistrationHandlers(RegistrationManagerImpl.java:205)
 at weblogic.management.provider.internal.RegistrationManagerImpl.register(RegistrationManagerImpl.java:85)
 at weblogic.management.runtime.RuntimeMBeanDelegate.register(RuntimeMBeanDelegate.java:320)
 at weblogic.management.runtime.RuntimeMBeanDelegate.<init>(RuntimeMBeanDelegate.java:257)
 at weblogic.management.runtime.RuntimeMBeanDelegate.<init>(RuntimeMBeanDelegate.java:222)
 at weblogic.ejb.container.monitoring.EJBPoolRuntimeMBeanImpl.<init>(EJBPoolRuntimeMBeanImpl.java:32)
 at weblogic.ejb.container.monitoring.MessageDrivenEJBRuntimeMBeanImpl.<init>(MessageDrivenEJBRuntimeMBeanImpl.java:49)
 at weblogic.ejb.container.manager.MessageDrivenManager.initialize(MessageDrivenManager.java:503)
 at weblogic.ejb.container.manager.MessageDrivenManager.setup(MessageDrivenManager.java:120)
 at weblogic.ejb.container.manager.MessageDrivenManager.setup(MessageDrivenManager.java:146)
 at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.createMDManager(MessageDrivenBeanInfoImpl.java:1481)
 at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.createDDMDManagers(MessageDrivenBeanInfoImpl.java:1378)
 at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.onDDMembershipChange(MessageDrivenBeanInfoImpl.java:1285)
 at weblogic.jms.common.CDS$DD2Listener.listChange(CDS.java:454)
 at weblogic.jms.common.CDSServer$DDHandlerChangeListener.statusChangeNotification(CDSServer.java:167)
 at weblogic.jms.dd.DDHandler.callListener(DDHandler.java:318)
 at weblogic.jms.dd.DDHandler.callListeners(DDHandler.java:344)
 at weblogic.jms.dd.DDHandler.run(DDHandler.java:282)
 at weblogic.jms.common.SerialScheduler.run(SerialScheduler.java:37)
 at weblogic.work.ExecuteRequestAdapter.execute(ExecuteRequestAdapter.java:21)
 at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
 >
 ####<May 26, 2006 7:42:13 PM EDT> <Info> <EJB> <ist-clft2> <wltest1> <ExecuteThread: '1' for queue: 'default'> <<WLS Kernel>> <> <> <1148686933069> <BEA-010060> <The Message-Driven EJB: RhapsodyMDB has connected/reconnected to the JMS destination: weblogic.jms.DMB_BEAN_QUEUE.>
 
 Generally this happend after there were cluster communication issues. Multi-cast messages were lost and our MDB reconnects to the JMS queues as indicated by the below log:
 ####<May 30, 2006 5:19:06 PM EDT> <Info> <EJB> <AMTC-RAP-STG3> <RAPBEA1S> <[ACTIVE] ExecuteThread: '54' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1149023946040> <BEA-010060> <The Message-Driven EJB: DataBrokerMDB has connected/reconnected to the JMS destination: weblogic.jms.PHINMS_DMB_QUEUE.>
 ####<May 30, 2006 5:19:10 PM EDT> <Info> <Cluster> <AMTC-RAP-STG3> <RAPBEA1S> <[ACTIVE] ExecuteThread: '22' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1149023950228> <BEA-000112> <Removing RAPBEA3S jvmid:720875810499147484S:cmts-rap-bea3:[7005,-1,-1,-1,-1,-1,-1]:DMBstg:RAPBEA3S from cluster view due to timeout.>
 ####<May 30, 2006 5:19:11 PM EDT> <Info> <Cluster> <AMTC-RAP-STG3> <RAPBEA1S> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1149023951009> <BEA-000115> <Lost 2 multicast message(s).>
 ####<May 30, 2006 5:19:11 PM EDT> <Info> <Cluster> <AMTC-RAP-STG3> <RAPBEA1S> <[ACTIVE] ExecuteThread: '22' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1149023951040> <BEA-000111> <Adding RAPBEA3S with ID 720875810499147484S:cmts-rap-bea3:[7005,-1,-1,-1,-1,-1,-1]:DMBstg:RAPBEA3S to cluster: DMBstg_cluster view.>
 
 This would cause the queues to eventually have hundreds of consumers and cause the server to fail.
 Basically, it seems as though the MDBs that are supposed to stop continue and attempt to process, while new threads connect to the JMS queues.
 I tried undeploying our application and deleted it from the configuration. However there were consumers still on the respective queues and when I sent messages, I got an error indicating a "Class Not Found exception" due to the fact that the EJB was undeployed and deleted from the configuration, however the MDB component was not and continued to listen for messages. In 8.1.5, as soon as the application was undeployed, there were zero consumers on the JMS queues.
 I have read the posts about a soon to be released fix that would have the MDBs connect only to the queues locally and not go out the the cluster. Would this fix my issue?
 Is there something in the deployment descriptor to configure that will cause it to disconnect and now spawn so many consumers to the JMS queues?
 Why is it that the number of MDB consumers on the JMS queues stayed static in 8.1.5, but they are erratic in 9.1 even after I set our 9.1 server to use the 8.1.5 execute queue policy. Help would be much appreciated.

I recommend contacting customer support. There's a known problem with MDBs listening to distributed destinations that are local to the same cluster as the MDB, you're problem may be related (the clue is that the stack trace contains jms.dd.DDHandler.callListeners()). The problem is that the MDB connects to all physical queues in a distributed destination rather than just the local queue.
 Tom

JMS Queue Vs JMS replyTo Queue name for Receiver JMS channel.

HI,
I am working with receiver JMS adapter and using the protocol WbeSphereMQ JMS provider.
Here I could not able to figure out the difference between the following parameter.
Target tab JMS Queue and Processing tab-JMS replyTo Queue name.
I tries the find the same in help.sdn.com but here also not able to find correct information .
for Processing tab -JMS replyTo Queue name Parameter it is written that "Specify the name of the queue to which the responses are to be sent."
But what is the use of Target tab JMS Queue Parameter. No information is given against this parameter.
http://help.sap.com/saphelp_nw04/helpdata/en/10/b1b4c8575a6e47954ad63438d303e4/frameset.htm
regards,
Navneet.

the initial JMS Queue is the queue you will connect too.
i guess SAP felt an explanation to that was not required....
SAP does not even bother to explain it here in the specific link to JMS-Provider-Specific Settings (for Webshpere although it does for SonicMQ!).
http://help.sap.com/saphelp_nw04/helpdata/en/c1/739c4186c2a409e10000000a155106/frameset.htm
I do not use the "ReplyTo" in my current scenarios.

JMS Queue working with only one AIA instance.

Hi,
We are having a Web-Logic JMS Queue configured for an instance. I have developed a consumer in AIA instance to pull the messages from the Queue.
And this works fine.
Now I have an another instance consumer which is pointing to the same Queue, but it fails to get the messages from it.
I have switched off the consumer in the FIRST instance, but even then consumer from the SECOND instance was not able to pull the messages.
Later, I tried switching on the consumer of the FIRST instance, and all the messages were pulled in this instance.
So how can I make it work with two AIA instances and one JMS Queue, provided only one AIA instance consumer is active at a time.
Thanks in Advance.
Regards!

* Likely your best bet is to check your server logs for "Error" and "Warning" messages, and/or, since these questions are specific to AIA's usage of JMS, post your questions to the AIA newsgroup.
* WL JMS does not impose a limit on the number of consumers on a queue, but it does only allow one named connection with the same "client id" to connect at a time. Its unusual to name connections in queueing applications, but possible - and AIA may be doing this. (If this is the problem there should be "client id in use" style log messages or exceptions.)
* Another possibility is a misconfiguration of your remote consumer. Make sure the URL is correct, and remember, if an application is running in the same cluster as the remote destination, don't specify a URL.
* Also, if the remote consumer is running in a different domain, make sure the domains are named differently, and that no two JMS servers in the two domains have the same name (as per the unique naming restrictions documented in the Best Practices section of the JMS configuration guide -- http://download.oracle.com/docs/cd/E14571_01/web.1111/e13738/best_practice.htm#CACJCGHG ).
Regards,
Tom

WAS 6.4.0 - Capability to provide JMS Queue Managers

Similar Messages

Maybe you are looking for