Waveform NOT showing up

Windows 7
CC2014 Premiere - up to date.
P2 Footage
Still, constantly having issues with the waveform NOT showing up in the sequence.
Usually the second 1/3 or 1/2 of the footage in the sequence.

Hi editman,
Please tell us more about your system:
FAQ: What information should I provide when asking a question on this forum?
... if you want anybody to give you qualified assistance, provide the suggested info.
especially GPU and Audio Hardware and the media formats affected.
Also:
Are the clips nested or multicam?
Did you render the sequence audio?
Did you choose Automatic peak file generation in the audio preferences?

Similar Messages

Capacitor & inductor current waveforms not showing correctly

Hello,
After a fair amount of time playing around, I cannot seem to get the current waveforms of a purely capacitive / inductive circuit to show correctly on the oscilliscope.
since I through inductor =( ∫v dt) / L
I get extremely high current values on the oscilliscope (in the region of kA) adn for a purely capacitive circuit - in the region of pA.
ie, a square wave DC source, 10V to -5V, 1ms @ 10V and 2ms @ -5V, period of 3ms - connected to a 1mH inductor.
(∫10 dt)/L = (10 x .001) / .001 = 10A - so at 1ms, the current will rise to 10A ( in a linear fashion)
[(∫10 dt) / L] from 0 to 1ms + [(∫-5 dt) / L] from 1ms to 3ms = 0 = current will drop to 0A in a linear fashion from 1ms to 3ms.
THIS does not show on the osciiscope!
By adding an instantaneous current probe onto the circuit - this will roughly show the correct value - but obviously will not show an accurate waveform.
Any help would be extremely appreciated.
Many thanks.

Thanks for your reply,
I'm using 12.0.1 power pro edition
I literally just opened up the file to check it and to post it here, and it works?!
Rather confusing as it was most definately not working when I started this thread.
Maybe the program needed and clean startup or something.... but the current values were all over the place.
When I analysed the circuit by hand, I would get values for current and voltages but when simulated they were in the range of 500KA etc with a simple capacitor circuit with a 10V sawtooth supply.
Thanks anyway.
SS

Audio Waveforms Not Showing In Timeline - Bug Report

When I send P2 Footage from Prelude to PP, the audio waveforms on the timeline do not show, even though the settings are correct. I have to close PP and then reopen it and then they show. It is some sort of a bug. I'm on Mac OS 10.9, latest version, fast computer. Anyone else having this issue?

There are three kind of audio tracks, stereo, mono and 5.1. Mono can only be placed in a mono track, stereo only in a stereo track and 5.1 only in a 5.1 track. By default a new sequence has three stereo tracks, so when you enter mono material, a new mono track is created in track 4.
In your case you probably have 6 audio tracks of one kind and the 'lost' one is another kind of track and that is the reason it ends up in track 7. You can of course delete empty audio tracks, which will cause track 7 to move up.

Waveforms not showing up in Timeline

Need a little help.
I can't get the audio waveforms to show up in the timeline. All I get is little x's across the audio tracks.
Any help is greatly appreciated.
Thanks,
Chikers

in addition:
what i'd call the creation of waveform peak files (so you can see the waveforms) seem to be only created when the timeline is zoomed out where you can see all of a particular clip or clips.
after you zoom out, then wait, you'll see the little x's turn in to visible waveforms over time.

Waveforms not showing up in final cut pro 10.1.3

Hi there,
I've recently updated to FCP X 10.1.3 - mostly works fine but i've got a problem with audio waveforms (both separate audio and audio track of a video clip) not rendering/showing up when editing in the timeline.
Also i've found multi-cam or syncronising clips to be worse at syncing audio than previous versions.
Anyone else have this problem, or any clue how to fix?
Thanks.
David

Apologies! All sorted. My mac was just taking so long to render the audio lol
Still having issues with syncing audio (zoom h4n) video clips (multicam clip or sync clips). Normally works like a dream even on difficult material, but for some reason now randomly sync's clips way off the mark.
Cheers

Audio waveforms not showing up in viewer

Using Final Cut Pro 6. When double clicking an audio track, it doesn't show up correctly in the viewer. The top half doesn't come up at all and the bottom doesn't look right. No idea why this is happening or how to fix it. Tried dumping the audio waveform cache, but that did nothing. Help ASAP would be much appreciated as this system needs to be used to edit something with audio right away. Thank you!

I am having the same problem. I am running FCP 6.0.4 and when I double click on an audio clip in the timeline, there is no waveform in the viewer. Just a big black box.
In the past I have deleted the waveform cache folder and trashed preferences. But this isn't working anymore.
DKG

Waveforms not showing properly from purchased ITMS

I have imported some songs that I purchased from iTunes into the iMovie timeline...Unlike songs that I have ripped from a CD they don't seem to show a waveform and instead just show a big purple bar which makes things trickier to synch to the images/clips...
Sorry if this has already been covered in a different forum but if someone could point in the right direction on how to resolve it I would be most appreciative.

OK....sorry for the name change but this is still DVDFLASHBACKS and my quesion...apparently my settings for the forums didn't carry over properly and now I have somehow ended up with two profiles one for each machine but using the same login id...just another headache since I got this frickin Macbook Pro but that is for another thread...
i have discovered that my problem with the wave forms only seems to be happening on the Macbok Pro...so I wonder if it is something wrong with iLife 06 on the Intel platform only...
Using the exact same song from ITMS on my G5 I am able to see the waveform...

Why the waveform in Main program does not show up?

Hellow!
Attached is a simple example of the problem i met,when i run "main1.VI",why the waveform in subvi "1.VI" did not show up?what shall i do to make it show up? thanks!
Attachments:
test.llb ‏22 KB

I thought I already explained that. You call a subVI that never stops which updates its own hidden waveform graph forever. This subVI cannot produce any output to the main VI until it finishes. It never finishes!
Dataflow dictates that:
A node cannot execute until all inputs have received data.
A node cannot produce output until it finishes.
You have a few options, two are shown in the attached modification:
(1) get rid of the while loop in the subVI and place it in the main VI. Now the subVI gets called successively, always immediately returning a value. (This is the correct and recommended way).
(2) Feed a reference to the chart of the main VI to the subVI, then update the main graph via property writes. This is not very efficient but can be useful in a limited set of circumstances. The implementation is also currently incomplete, because the subVI cannot be stopped.
In any case, please put some small wait in each of your loops. Else they spin as fast as possible, consuming all CPU and making your computer sluggish.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
main3.llb ‏41 KB

ITunes does not show up on apple tv 1st gen.

i have a 1st gen apple tv with the 160 gig HD. recently, it will not show the itunes site. Under teh movies tab there are my movies and trailers and that's it. Does anyone know how to get the itunes store back on apple tv?

Known issue currently, you'll need to wait for the fix.

My downloaded text sounds do not show up under the sounds tab in settings after installing 8.1.1. can someone help me please?

i downloaded a couple text tones and since installing 8.1.1, they will not show up under the sounds tab. in fact, they do not show up in my recent purchases on itunes, but when i go to buy them again, it says that i have already bought this tone. I just want to use the tones i paid for as the tones on my phone. not asking much.... thanks for the help. i hope someone can help me get the tones working. thank you.

This was happening to me too but only for some of my songs. I have a mac so I dunno about PCs, but for most of my ringtones I had to create an ACC version in itunes to make them short enough then turn that into a m4r and those all worked fine. But if the song was already short enough and I didn't create an ACC version and just turned the original into a m4r, then it wouldn't appear in my itunes.
so if you're on a mac:
1. go to get info, options, pick when you want the song to start and end.
     Has to be pretty short to work, 30 second or less is good
     if it's already short enough that's fine
2. right click and click 'create ACC version'
     a copy with the length you put in will appear, drag that into a folder or whatever and just type in m4r where m4a would be
     still make an ACC version even if it's the right length
Hopefully this helps someone else.

Internet Streams in Playlists do not show up on Apple TV

I use the following setup:
- Apple TV MD199LL/A (Software 6.0.1) just updated to the latest
- iTunes 11.1.3 for Windows (from a Windows 7 x64)
- iTunes 11.1.3 for MAC (from a Apple MacBook Pro x64, Maverix)
Homesharing is turned on both computers
From both machines I share pictures, videos and music.
All photos, videos and music files are getting displayed on the Apple TV menu, and can be played.
All iTunes playlists from both machines are getting displazed on the Apple TV
BUT!
If a internet stream is added to a playlist, this entry does not show on the Apple TV menu.
If the playlist contains only internet streams the Apple TV menu says "There are no songs in this library"
If I hit the play key on my remote, it will randomly play the first stream in the playlist (not realy reproducable pattern)
I can play those streams in iTunes and send it via AirPlay without problems,
Can anyone help me with this and tell me what I'm doing wrong?
Thank you

You can only view that rental on the iPad. For it to show up it has to be rented directly on ATV or through a computer and streamed via home sharing

When I sync my iPod to my MacBook through iTunes new events do not show up and old events are not deleted. I am using Snow Leopard and not iSync.

I am using Snow Leopard on a MacBook. I have an iPod touch 3G. I do not use iSync it Mobile Me. When I sync my iPod through iTunes new events on my iPod do not show up on my Mac and old events do not delete. I have read help instructions that include deleting the data on the iPod. The iPod has the correct data and the Mac does not so I have not followed those instructions. I need help as the only reason I bought the Mac was to be able to sync, back up, view and print my calendar. Currently it is useless. If only Apple could have learned from the elegance of the Palm software.

Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

Synced videos do not show up on iPod

Every time I sync my iPod with iTunes, although iTunes says the videos are synced, they do not show up in the Video app on the iPod.
This is a fairly new problem. All these videos have been synced before and they all showed up just fine in the Video app, but as of late the iPod does not show them. Searching for them yields no results.
The videos are in a compatible format and do not have an extremely high definition. Again, I do not think the problem is with the videos, because previously I was able to view them all just fine.
I have at least 1G of memory left, 2G without syncing the videos.
I have erased and re-synced them in iTunes, to no avail. I can play the videos on the iPod from iTunes, but not on the actual iPod device. I'm using windows iTunes, and it is up to date. The iPod software is up to date. I don't want to do a restore because I've already done that multiple times for multiple issues, but if that's what I have to do, I will. It's a pretty old iPod. I'm syncing with a third-party Duracell cable, but I really don't think that's the problem.
I'm not sure what it means, but in iTunes I have checked the option that reads, "Prefer standard definition videos". Syncing with that option unchecked changes nothing so far as I can tell.
Thanks for all your help!
iPod Touch 4th Gen. 8G
iOS 6.1.6
1G free with videos, 2G free without
iTunes for Windows 64-bit V12.1
Duracell 30 pin to USB iPod cable

Try:
- DFU mode and then restore to factory settings/new iPod via iTunes
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
- Try with a new video

Files do not show up on HDD

I tried to get an answer through the iTunes community, and was advised to try here instead as it didn't have anything directly to do with iTunes
Not all iTunes Files not showing up on External HDD
So in a nutshell, all of my 35'000 iTunes files (actual MP3 files) were saved on a TC 2.0TB disk and used on multiple Mac's to pull music from. All music files would be saved and streamed wirelessly from this TC and nowhere else.
I would always add files to this external wireless client and iTunes would work flawlessly playing whatever song I chose through the library.
If I would go in to the iTunes directory (path) and look up files on the HDD the files were just not there (but if clicking on the link through iTunes - show in finder - they would appear on the HDD but only through this method). I gave it no further thought until my TC died (i.e. no longer powers up) on me...
I removed the HDD from the TC and placed it in an USB cradle and after looking into the iTunes folder there are only a fraction of the folders / files much less than expected... When I do a cmd-I I'm told that there are 35'000 files, but they just won't show up.
Any ideas on how i can get all the files to be displayed as I want to copy these over on a new TC and need to map iTunes to this new location/path?

Hello Jfrosa,
Thank you for the details of the issue you are experiencing with File Sharing. I found an article that should help with troubleshooting this:
OS X: How to connect to Windows File Sharing (SMB) using Snow Leopard or earlier
http://support.apple.com/kb/ht1568
Thank you for using Apple Support Communities.
Best,
Sheila M.

Movie rentals that I downloaded onto iMac with Lion to do not show up on ATV 2 in menu for computers. Purchased movies show up just fine. What to do or look for?

I have an imac that is running lion and an Apple TV generation 2. I have rented a movie from itunes and it shows up on my imac in Itunes under a rental icon, and will play fine on my computer. However, it does not show up as choice to play on my apple tv. I have homesharing enabled and everything else works fine including purchased movies that are on my imac, but no where does it show rental movies.
What do I look for? What do I do to play the rental movie on my apple tv 2?

Answer to my own question:
Wait until the downloaded rental has completed its download to the imac. This took a long time for me, since it was part of several things that I was downloading at the same time.
Finally, it showed up on my apple tv. Interestingly, I was able to watch much of the movie on my iMac before the movie finished its download and was available to the ATV 2.

Waveform NOT showing up

Similar Messages

Maybe you are looking for